Robotica, a gorgeous a ball-jointed doll, is our new Thing of the week. The design’s free, you dan either print it yourself or order the parts.

Thing of the Week: 3D Printed "Robotica"

MatterHackers is knocking 15% off virtually every nozzle it carries, including the bejeweled Olsson Ruby, E3Ds of every size and other specialty nozzles.

[DEAL] 15% Off Nozzles at MatterHackers | All3DP

For his Automaton music video, Jamiroquai frontman wears illuminated 3D printed headgear crafted by London-based designer Moritz Waldemeyer.

Light-Up Helmet Steals the Show in Jamiroquai Music Video | All3DP

Japanese researchers came up with a way to cool down a humanoid robot named Kengoro -- allowing it to sweat out of its 3D printed "bones".

Kengoro the Robot 'Sweats' Thanks to 3D Printing | All3DP

The Modix Big-60 V3 is a large-format 3D printer at an incredibly affordable price. Read on for our review of its specs.

Modix Big-60 V3: Review the Specs | All3DP Pro

The Yissum Research Development Company reveals a new 3D printing process to produce "personalized food" based from nano-cellulose material. 

Israeli Scientists Develop 3D Printing Technology for Nutritious and Tasty "Personalized Food" | All3DP

Check out our buyer's guide for the best laser engravers on the market. Plus, an introduction to laser engraving, services, and materials.

2021 Best Laser Engravers | All3DP

XYZprinting Inc. now offers highly competitive print-for-pay solutions from its California offices for customers looking for one to 1,000 selective laser sintering (SLS) PA-12 nylon parts.

XYZprinting's SLS Technology Helps Prove Prototypes Faster | All3DP

The creator of the Octoprint web interface for 3D printing requests support via Patreon to continue development of open source software.

OctoPrint Creator sets up Patreon to Continue Development | All3DP

Oakland artist and Instructables user Doug McCune shares a project that shows how you can turn data generated from an earthquake into a 3D printed topographical map. Shake up your weekend with this great DIY project! 

[Project] 3D Print An Actual Earthquake Map | All3DP

Reports circulate that Chinese company Zhouda duped investors for billions of dollars, based on ability to build a house from 3D printed parts in 3 hours.

3D Printed Houses by Zhouda: Was it Just a Billion Dollar Scam? | All3DP

Materialise and Safilo Group have joined forces to create beautiful sculptures for the stunning 3D printed OXYDO SS 2017 eyewear collection.

Safilo Group and Materialise Launch Funky 3D Printed Eyewear | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Drone Case | iFlight DC3</h3>
<p>Simple drone case for the three inch quadcopter by iFlight. The quadcopter frame model is DC3.</p>
<p>There is enough room above the drone for antennas and behind the drone for a tail VTX antenna.</p>
<p>The lid is somewhat secure and is mostly meant to be put inside a backpack or something.</p>
<p><strong>Flip the lid 180 degrees before slicing in order to use less print material.</strong></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Black
</body></html>

Drone Case | iFlight DC3

# Drone Case | iFlight DC3

Simple drone case for the three inch quadcopter by iFlight. The quadcopter frame model is DC3.

There is enough room above the drone for antennas and behind the drone for a tail VTX antenna.

The lid is somewhat secure and is mostly meant to be put inside a backpack or something.

**Flip the lid 180 degrees before slicing in order to use less print material.**

GAME OF THRONES STARK KEYCHAIN

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <ul>
<li>Anty Spy cover for Laptops.</li>
<li>Allows fix a cover front the webcam thanks to a small tong. Easy to fix and get out.</li>
<li>Slim size. This allows close your laptop screen with no problems.</li>
<li>Elastic proertis. This makes the product usefully for quite a lot laptops currently on the market.</li>
<li>Cute design for girls. Pink ABS recomended to print.</li>
</ul>
<p>&#xA0;</p>
										</div>
										
                                    								</body></html>

NoS (AntiSpy for Laptops)

 Anty Spy cover for Laptops. Allows fix a cover front the webcam thanks to a small tong. Easy to fix and get out. Slim size. This allows close your laptop screen with no problems. Elastic proertis. This makes the product usefully for quite a lot laptops currently on the market. Cute design for girls. Pink ABS recomended to print. 

<html><head></head><body><div class="text-auto-link">
                                            <p><strong>An&#x2019;Lyan</strong> is the first <strong>Lady of the Summer Queen</strong>. Riding her fox <strong>Feriic,</strong> she travels through dreams and can transfer dream magic into the real world!</p>
										</div>
                                    								</body></html>

An'Lyann and Feriic

 An’Lyan is the first Lady of the Summer Queen. Riding her fox Feriic, she travels through dreams and can transfer dream magic into the real world! 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>A little gadget for stopping your teabag getting lost in the mug! Perfect brew everytime.</p>
<p><a href="http://www.starbucks.com/">Starbucks</a> is an American coffee company and coffeehouse chain based in Seattle, Washington. Established in the 1970&apos;s, Starbucks is the largest coffeehouse company in the world, with 23,187 stores in 64 countries, including 12,973 in the United States, 1,897 in China, 1,550 in Canada, 1,088 in Japan and 927 in the United Kingdom.</p>
										</div>
										
                                    								</body></html>

Starbucks Teabag Hook

 A little gadget for stopping your teabag getting lost in the mug! Perfect brew everytime. Starbucks is an American coffee company and coffeehouse chain based in Seattle, Washington. Established in the 1970's, Starbucks is the largest coffeehouse company in the world, with 23,187 stores in 64 countries, including 12,973 in the United States, 1,897 in China, 1,550 in Canada, 1,088 in Japan and 927 in the United Kingdom. 

Shaver Holder

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>[Updated version... old stl&apos;s replaced with a new and improved version! (photos are of the old stl)]</p>
<p>There are some 2 piece designs to mount the 1hp Bosch Colt router on the MPCNC Primo/Burly, but I wanted a stiffer 1pc design. So I drew this this tool mount for my MPCNC Primo J (25.4mm). It is intended to mount to the MPCNC like the original Burly/525 tool mount, but no is drilling required:</p>
<p><a rel="nofollow" href="/thing:1671517">https://www.thingiverse.com/thing:1671517</a></p>
<p>I resized the pipe bolt holes to M5 clearance, and increased the counterbores to 9mm diameter to fit the M5x30 allen bolts I use with my Primo nut traps. The router clamp uses 2@ M5x30 allen bolts and M5 nylock nuts. The clamp nuts are captured for convenience.</p>
<p>I didn&apos;t use a sloping top like many Colt mounts out there. The flat top allows the router to be rotated as needed, which can help with some scenarios where router power cable clearance or location may be an issue. The flat top also adds convenience when it comes to designing adapters to quickly swap in other common MPCNC tools like drag knifes, lasers, etc. The spindle lock access hole lines up with the button only if the router is rotated to the correct orientation. </p>
<p>Note the power cord on the Colt exits to the side, which is generally problematic for the MPCNC design. It is usually aligned with either the X or Y axis to clear the trucks when homing, and even then if you have a sufficiently tall build, the cord may still crash into the side rails when homing (depending on the z height when homing). So unless you modify the cord strain relief, you must always pay attention to z height before homing on a Colt equipped MPCNC!</p>
<p>I printed in PETG for heat resistance and stiffness. PLA is not wise for a cnc motor holder. I setup my slicer to use 4 walls, 8 tops/bottoms, and 45% infill on all my printed tools... but up it to 70% infill in for this part as you will want the extra stiffness. Build plate only supports are needed. The part is already oriented ready to print. Flipping it over will increase support material and print time, and make the more visible top surface look nasty.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>70%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=na+PETG&amp;tag=tv-auto-20" target="_blank">
                        na PETG                    </a>

                    
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Build plate supports only are necessary.</p></div>
</body></html>

MPCNC Primo J Bosch Colt 1HP Mount

[Updated version... old stl's replaced with a new and improved version! (photos are of the old stl)]

There are some 2 piece designs to mount the 1hp Bosch Colt router on the MPCNC Primo/Burly, but I wanted a stiffer 1pc design. So I drew this this tool mount for my MPCNC Primo J (25.4mm). It is intended to mount to the MPCNC like the original Burly/525 tool mount, but no is drilling required:

https://www.thingiverse.com/thing:1671517

I resized the pipe bolt holes to M5 clearance, and increased the counterbores to 9mm diameter to fit the M5x30 allen bolts I use with my Primo nut traps. The router clamp uses 2@ M5x30 allen bolts and M5 nylock nuts. The clamp nuts are captured for convenience.

I didn't use a sloping top like many Colt mounts out there. The flat top allows the router to be rotated as needed, which can help with some scenarios where router power cable clearance or location may be an issue. The flat top also adds convenience when it comes to designing adapters to quickly swap in other common MPCNC tools like drag knifes, lasers, etc. The spindle lock access hole lines up with the button only if the router is rotated to the correct orientation. 

Note the power cord on the Colt exits to the side, which is generally problematic for the MPCNC design. It is usually aligned with either the X or Y axis to clear the trucks when homing, and even then if you have a sufficiently tall build, the cord may still crash into the side rails when homing (depending on the z height when homing). So unless you modify the cord strain relief, you must always pay attention to z height before homing on a Colt equipped MPCNC!

I printed in PETG for heat resistance and stiffness. PLA is not wise for a cnc motor holder. I setup my slicer to use 4 walls, 8 tops/bottoms, and 45% infill on all my printed tools... but up it to 70% infill in for this part as you will want the extra stiffness. Build plate only supports are needed. The part is already oriented ready to print. Flipping it over will increase support material and print time, and make the more visible top surface look nasty.

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Let&apos;s begin with: &#xA0;USE AT YOUR OWN RISK!!!!</p>
<p>This is version 6 of my brush cutter. &#xA0;It attaches to a Ryobi 18V String Trimmer (<a href="https://www.google.com/url?sa=t&amp;rct=j&amp;q=&amp;esrc=s&amp;source=web&amp;cd=2&amp;cad=rja&amp;uact=8&amp;ved=0ahUKEwjo6N6Bqo_VAhXLOj4KHa-oCxYQFghnMAE&amp;url=https%3A%2F%2Fwww.amazon.com%2FRyobi-P2005-Cordless-String-Trimmer%2Fproduct-reviews%2FB005RT2VCY&amp;usg=AFQjCNFMAiS9npMrfhOP7qEMkb2QLE5zTQ" target="_blank" rel="noopener noreferrer">THIS ONE</a>). &#xA0;It is designed to cut down thicker brush that may grow in your yard, and this version seems to be able to handle large weeds about the diameter of my pinky finger (average adult male). &#xA0;I did break it when I hit the cedar fence, but it&apos;s not meant to take that amount of force.</p>
<p>PRINTING</p>
<p>I recommend printing this at 100% infill. &#xA0;As long as you don&apos;t abuse it, it probably won&apos;t break. &#xA0;You can then sharpen it by &#xA0;sanding it if it starts getting dull. &#xA0;Also, 100% infill adds to the rigidity of the design, and you want that.</p>
<p>&#xA0;</p>
<p>BONUS: &#xA0;Here&apos;s a video of Version 5, which definitely broke: &#xA0;<a href="https://youtu.be/4e7GXS0hwms">https://youtu.be/4e7GXS0hwms</a></p>
<p>The version 6 brush cutter blades are twice as thick, and it tore through those weeds. &#xA0;</p>
										</div>
										
                                    								</body></html>

Ryobi 18V String Trimmer - Brush Cutter Attachment

 Let's begin with: USE AT YOUR OWN RISK!!!! This is version 6 of my brush cutter. It attaches to a Ryobi 18V String Trimmer (THIS ONE). It is designed to cut down thicker brush that may grow in your yard, and this version seems to be able to handle large weeds about the diameter of my pinky finger (average adult male). I did break it when I hit the cedar fence, but it's not meant to take that amount of force. PRINTING I recommend printing this at 100% infill. As long as you don't abuse it, it probably won't break. You can then sharpen it by sanding it if it starts getting dull. Also, 100% infill adds to the rigidity of the design, and you want that. BONUS: Here's a video of Version 5, which definitely broke: https://youtu.be/4e7GXS0hwms The version 6 brush cutter blades are twice as thick, and it tore through those weeds. 

<html><head></head><body><div class="text-auto-link">
                                            <p>The flute printable&#xA0;without supports.</p>
										</div>
                                    								</body></html>

The Twisted Recorder

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is a motorized camera slider powered by USB, and with a travel distance of 300mm; its small size makes it perfect for traveling, and it fits perfectly inside a backpack.</p>
<p>For this project you will need:</p>
<p>- 2x 440mm*18mm copper pipes (they can also be of different materials);<br> - GT2 belt;<br> - M4 flat head bolts and nuts;<br> - M3 flat head bolts and nuts;<br> - 1/4 camera screw and nut;<br> - 1x Arduino Nano;<br> - 1x DRV8825 stepper motor driver (any Nema 17 driver is ok);<br> - 1x Nema 17 20mm-23mm;<br> - 1x XL6009 DCDC step-up converter;<br> - 1x USB terminal;<br> - 2x Endstop switches;<br> - 1x Potentiometer (any resistance);<br> - 1x 8mm*8mm computer button;<br> - 1x 14mm*9mm switch;<br> - 1x 11mm*6mm switch;<br> - 1x 5mm led;</p>
<p>For the build process, follow the images; you need to drill some holes through the pipes to mount them to the case and use a file and sandpaper to smooth the rods; you can also add some lubricant. The belt is fixed to the camera mount using some cable ties, and the bores are fixed to the mounts using M3 bolts, nuts, and washers (they should rotate freely).<br>The electronic circuit consists of an Arduino connected to the stepper motor driver and to all the control switches, buttons, end-stops and led (the connection pins are listed in the Arduino program). The USB terminal powers the Arduino with 5V and the step-up converter, which converts the 5V to 12V to power the driver (you should put a 100uF 16V-25V capacitor in parallel to the driver power input). Then, you can write and upload the code and the motorized camera slider is ready!</p>
										</div>
										
                                    								</body></html>

Motorized camera slider

 This is a motorized camera slider powered by USB, and with a travel distance of 300mm; its small size makes it perfect for traveling, and it fits perfectly inside a backpack. For this project you will need: - 2x 440mm*18mm copper pipes (they can also be of different materials); - GT2 belt; - M4 flat head bolts and nuts; - M3 flat head bolts and nuts; - 1/4 camera screw and nut; - 1x Arduino Nano; - 1x DRV8825 stepper motor driver (any Nema 17 driver is ok); - 1x Nema 17 20mm-23mm; - 1x XL6009 DCDC step-up converter; - 1x USB terminal; - 2x Endstop switches; - 1x Potentiometer (any resistance); - 1x 8mm*8mm computer button; - 1x 14mm*9mm switch; - 1x 11mm*6mm switch; - 1x 5mm led; For the build process, follow the images; you need to drill some holes through the pipes to mount them to the case and use a file and sandpaper to smooth the rods; you can also add some lubricant. The belt is fixed to the camera mount using some cable ties, and the bores are fixed to the mounts using M3 bolts, nuts, and washers (they should rotate freely).The electronic circuit consists of an Arduino connected to the stepper motor driver and to all the control switches, buttons, end-stops and led (the connection pins are listed in the Arduino program). The USB terminal powers the Arduino with 5V and the step-up converter, which converts the 5V to 12V to power the driver (you should put a 100uF 16V-25V capacitor in parallel to the driver power input). Then, you can write and upload the code and the motorized camera slider is ready! 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Remix of the nice original. It is way deeper to fit DPS8005 and cabling. Also added a lot of ventilation holes, removed banana sockets and corrected XT60 sockets.Original case for DPS5005 (too small for DPS 8005): <a rel="nofollow" href="/thing:2975884">https://www.thingiverse.com/thing:2975884</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Colorfill+PLA&amp;tag=tv-auto-20" target="_blank">
                        Colorfill PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Use PLA or PetG. Top part must be printed with supports. Back part can be printed without any supports.</p></div>
</body></html>

DPS8005 power supply case

Remix of the nice original. It is way deeper to fit DPS8005 and cabling. Also added a lot of ventilation holes, removed banana sockets and corrected XT60 sockets.Original case for DPS5005 (too small for DPS 8005): https://www.thingiverse.com/thing:2975884

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is the collection of miniatures launched through Patreon for the &quot;Warriors of the Cloth&quot; month in September 2019.</p>
<p>You can see more and support me at www.patreon.com/ltminis&#xA0;&#xA0;</p>
<p>They are now available individually on MyMiniFactory or here in this bundle.&#xA0; Please note that some of the miniatures when purchased singly have additional variant components which are not included in this bundle.</p>
										</div>
										
                                    								</body></html>

Warriors of the Cloth - Collection of Holy warriors - (32mm scale miniatures)

 This is the collection of miniatures launched through Patreon for the "Warriors of the Cloth" month in September 2019. You can see more and support me at www.patreon.com/ltminis They are now available individually on MyMiniFactory or here in this bundle. Please note that some of the miniatures when purchased singly have additional variant components which are not included in this bundle. 

<html><head></head><body><div class="text-auto-link">
                                            <p><a href="https://www.patreon.com/rnestudio">Check our Patreon!</a></p>
<p>Ready to print 32mm scale miniature</p>
										</div>
                                    								</body></html>