Oregon State University's College of Engineering researchers have made progress in the ability to rapidly manufacture flexible electronics and soft robotics.

3D Printable Gallium Alloys Could Lead the Way for Flexible Electronics | All3DP

Penn State and the University of Maryland are offering 3D printing degrees including hands-on approaches to learning about the technology.

Penn State and the University of Maryland Offer 3D Printing Degrees | All3DP

Entering the already cramped budget-MSLA 3D printer market is the Longer Orange 30. Is this the machine you want for the long haul? Read on for our review of its specs.

Longer Orange 30: Review the Specs | All3DP

Microsoft ceases production of its Kinect motion tracking sensor for the Xbox. Herald of a gaming future that was never to be, it lives on as an cheap and efficient scanning tool. So grab one quick.

The Kinect is Dead: Microsoft Discontinues Xbox Motion Sensor | All3DP

You just wrapped your head around 3D printing and it’s possibilities? Here comes 4D printing. And it makes printing even more futuristic.

4D Printing: Smart Materials Change Shape and Repair Themselves | All3DP

Announced at the IFA trade show in Berlin, Samsung Electronics partners with MakerBot to bring 3D printers to classrooms across Europe.

Samsung Electronics and MakerBot in Education Team Up | All3DP

Take a fascinating journey through geography, history, art and architecture with these 3D printed wonders of the world.

30 Wonders of the World 3D Printed | All3DP

SLA resin prints aren't famous for their strength. Yet, you might be surprised at how they compare to other materials...

SLA Resin Strength: How Strong Is 3D Printed Resin? | All3DP

This summer, the non-profit organisation, MakerGirl, travelled around America to bring 3D printing workshops to over 1,000 young girls.

MakerGirl Goes On Tour, Inspires Thousands | All3DP

Zortrax printing material sales data for 2015 indicates a 350% increase when compared to 2014!

Zortrax Printing Material Sales have Risen by 350% | All3DP

Want to make and export 3D printable STL files with Blender? Check out this simple guide to learn how to do it!

Blender & STL Files: How to Make 3D Printables | All3DP

The leading 3D design and engineering software firm Autodesk has announced the resignation of CEO and President Carl Bass.

Autodesk CEO Carl Bass Steps Down As Company Undergoes Major Transition | All3DP

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <div>
<p>As a huge fan of the <a href="http://www.bbc.co.uk/programmes/b045fz8r" rel="nofollow">Peaky Blinders</a> series, I couldn&apos;t resist the urge to sculpt a few of the titular gangsters. These aren&apos;t representing characters from the show, more serving as an homage/series of historical miniatures. These are a bit too detailed for FDM printing (though I&apos;d love to be proven wrong) but I&apos;ll be ordering some from <a href="https://www.3dhubs.com/new-york/hubs/obsessively-geek" rel="nofollow">Obsessively Geek over at 3Dhubs</a> who does some amazing SLA-printed prototypes for us on a regular basis, and I&apos;ll post some makes/painted versions soon.</p>
<p>We&apos;ve set up a <a href="https://www.patreon.com/illgottengames" rel="nofollow">Patreon page</a> for anyone who&apos;s interested in helping to fund us so we can keep making free and open sourced games like Pocket-Tactics, Wayfarer Tactics. and others, not to mention the growing catalog of gaming miniatures that you can use for whatever you want! (Psst... we take requests and commissions...)</p>
<p>Enjoy!</p>
<p>Enjoy!</p>
</div>
										</div>
										
                                    								</body></html>

Peaky Blinder w/revolver (15mm scale)

 As a huge fan of the Peaky Blinders series, I couldn't resist the urge to sculpt a few of the titular gangsters. These aren't representing characters from the show, more serving as an homage/series of historical miniatures. These are a bit too detailed for FDM printing (though I'd love to be proven wrong) but I'll be ordering some from Obsessively Geek over at 3Dhubs who does some amazing SLA-printed prototypes for us on a regular basis, and I'll post some makes/painted versions soon. We've set up a Patreon page for anyone who's interested in helping to fund us so we can keep making free and open sourced games like Pocket-Tactics, Wayfarer Tactics. and others, not to mention the growing catalog of gaming miniatures that you can use for whatever you want! (Psst... we take requests and commissions...) Enjoy! Enjoy! 

<html><head></head><body><div class="text-auto-link">
                                            <p>Raspberry Pi&#xA0;3 (B, B+) case with optional 30x30mm or 40x40mm fan mount. No screws needed to assemble.</p>
<p>Preferred printing with PETG or ABS because parts of the circuit can be hot.&#xA0;Add support manually for easier removal, see preview.</p>
										</div>
                                    								</body></html>

Raspberry 3 (B, B+) case with optional 30/40mm fan mount

 Raspberry Pi 3 (B, B+) case with optional 30x30mm or 40x40mm fan mount. No screws needed to assemble. Preferred printing with PETG or ABS because parts of the circuit can be hot. Add support manually for easier removal, see preview. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p style="margin: 0px 0px 10px; color: #343638; font-family: Helvetica, Arial, sans-serif; font-size: 14.6666669845581px; line-height: 20px;">Thin man is desktop character figures of 2mm thickness. Please use as desktop figurine.</p>
<p style="margin: 0px 0px 10px; color: #343638; font-family: Helvetica, Arial, sans-serif; font-size: 14.6666669845581px; line-height: 20px;">standing : no need support parts<br>climbing : no need support parts<br>lying : need support parts<br>sitting : need support parts</p>
										</div>
										
                                    								</body></html>

Thin Man

 Thin man is desktop character figures of 2mm thickness. Please use as desktop figurine. standing : no need support partsclimbing : no need support partslying : need support partssitting : need support parts 

<html><head></head><body><div class="text-auto-link">
                                            <p>With supernatural accuracy, Xanshee&apos;s unforgiving arrows and her sharp knife always find their target. Escaping is futile... her shots will hit you as flying snakes.<br>Contains both Supported AND Unsupported files.</p>
										</div>
                                    								</body></html>

Xanshee, the Sharpshooter

 With supernatural accuracy, Xanshee's unforgiving arrows and her sharp knife always find their target. Escaping is futile... her shots will hit you as flying snakes.Contains both Supported AND Unsupported files. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is a replica of Jyn Erso&apos;s blaster from Star Wars: Rogue One&#xA0;and therefore, the intillectual property of Disney. I do not have the right to sell this property and anyone wishing to do so must obtain licensing/permision from Disney.&#xA0;</p>
<p>I modeled this off of movie/canon photos and blueprints of the Luger P08 (gun&#xA0;the actual&#xA0;prop&#xA0;is based on).&#xA0;Some details are not clear from the movie/canon photos so I used the Luger blueprints to fill in the blanks.&#xA0;</p>
<p>I printed it with a lot of the smaller peices separate such as the grips, trigger, lower grip screw head, bead eylet, magazine base, and slide release. This was so&#xA0;I could make it look more authentic (especially the paint job). However, I have included a .zip file where all these peices are part of the body. Therefore, you would only have to print the two body halves. It is labeled Jyn_blaster. The file labeled Jyn_blaster_more_pieces has all the smaller pieces mentioned at the begining of this paragraph as separate .stl files.</p>
<p>For added detail, I insalled four M2x4 screws on each side in the designated 2mm holes. The screws threaded snuggly into the holes without the need of a drill and/or tap. I then weathered the blaster with black oil paint and a rag. I applied&#xA0;the oil paint to most of the blaster and then wiped off the excess with a rag. This allows the paint to build up in the grooves and cracks, just like dirt would over a long period of time.&#xA0;</p>
										</div>
										
                                    								</body></html>

Jyn Erso's blaster from Star Wars: Rogue One

 This is a replica of Jyn Erso's blaster from Star Wars: Rogue One and therefore, the intillectual property of Disney. I do not have the right to sell this property and anyone wishing to do so must obtain licensing/permision from Disney. I modeled this off of movie/canon photos and blueprints of the Luger P08 (gun the actual prop is based on). Some details are not clear from the movie/canon photos so I used the Luger blueprints to fill in the blanks. I printed it with a lot of the smaller peices separate such as the grips, trigger, lower grip screw head, bead eylet, magazine base, and slide release. This was so I could make it look more authentic (especially the paint job). However, I have included a .zip file where all these peices are part of the body. Therefore, you would only have to print the two body halves. It is labeled Jyn_blaster. The file labeled Jyn_blaster_more_pieces has all the smaller pieces mentioned at the begining of this paragraph as separate .stl files. For added detail, I insalled four M2x4 screws on each side in the designated 2mm holes. The screws threaded snuggly into the holes without the need of a drill and/or tap. I then weathered the blaster with black oil paint and a rag. I applied the oil paint to most of the blaster and then wiped off the excess with a rag. This allows the paint to build up in the grooves and cracks, just like dirt would over a long period of time. 

<html><head></head><body><div class="text-auto-link">
                                            <p>From the witcher 3 the helmet from eredin i decided&#xA0;to make it as a lego head&#xA0;<a title="The Witcher Wild Hunt Eredin Helmet" href="../the-witcher-wild-hunt-eredin-helmet-10962">https://www.myminifactory.com/object/the-witcher-wild-hunt-eredin-helmet-10962</a></p>
										</div>
                                    								</body></html>

lego the witcher helmet

 From the witcher 3 the helmet from eredin i decided to make it as a lego head https://www.myminifactory.com/object/the-witcher-wild-hunt-eredin-helmet-10962 

<html><head></head><body><div class="text-auto-link">
                                            <p>Based on this link&#xA0;<a href="https://www.sewingpartsonline.com/bobbins-class-15-metal-10-pack.aspx">https://www.sewingpartsonline.com/bobbins-class-15-metal-10-pack.aspx</a>&#xA0;</p>
<p>I decided to design this spare part that fits perfect on my WHITE sewing machine model no. 1510</p>
										</div>
                                    								</body></html>

Bobbin thread WHITE sewing machine model no. 1510

 Based on this link https://www.sewingpartsonline.com/bobbins-class-15-metal-10-pack.aspx I decided to design this spare part that fits perfect on my WHITE sewing machine model no. 1510 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a stand and a hook for the Fluke 101 multimeter.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40% gyroid</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Orange
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I printed this with 4 perimeters and 40% gyroid infill for added strength. 205/60 for first layer, 200/55 remaining layers.</p></div>
</body></html>

Fluke 101 hook stand

This is a stand and a hook for the Fluke 101 multimeter.

<p style="box-sizing: inherit; margin: 0px; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">Model dimensions:</p>

<ul style="box-sizing: inherit; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">
	<li style="box-sizing: inherit;">diameter - 100 mm</li>
	<li style="box-sizing: inherit;">width - 48 mm</li>
</ul>


Diecast Wheel for mud drag racing

Model dimensions:


	diameter - 100 mm
	width - 48 mm



gunno 

Bottle Drinker Holds your Bottle ore something els.


Bottle Drinker

Case for Ego Aio Pro and Pro C (Bat 18650)

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>According to Oblivion production designer Darren Gilford, the film&apos;s unique &quot;bubble ship&quot; was inspired by many real life machines, vehicles, and technology. Taking inspiration from dragonflies, this aircraft was piloted by the lead antagonist portrayed by Tom Cruise.&#xA0;</p>
<p style="text-align: center;"><object width="560" height="315"><param name="movie" value="//www.youtube.com/v/w0qQkSuWOS8?version=3&amp;hl=en_US"><param name="allowFullScreen" value="true"><param name="allowscriptaccess" value="always"><embed src="//www.youtube.com/v/w0qQkSuWOS8?version=3&amp;hl=en_US" type="application/x-shockwave-flash" width="560" height="315"></object></p>
										</div>
										
                                    								</body></html>