Name: Cubone(Pokemon)
Brand: Patrick
Availability: InStock

3D printing and scanning is used to help police solve a cold case. Investigators recreated the skull of a Jane Doe murder victim from 1970.

3D Printing Used to Reproduce a Murder Victim's Skull in a Cold Case | All3DP

Do computers do it better? Today in tech, we have a self-educating, 3D printing robots from the University of Oslo.

Artificial Evolution: Robots 3D Print Themselves | All3DP

3D printer manufacturer BonsaiLab has children specifically in mind for their new BS Toy 3D printer, which was first presented at the Nuremberg Toy Fair.

A bonsai 3D printer for the next generation of creatives | All3DP

scope for design hope to bring 3D printing to shoppers through use of an app and the ability to buy from the high street or even online.

Create Your Perfect Sunglasses with Scope for Design | All3DP

The Victoria Hand Project (VHP) has a chance to win $750,000 from the Google.org Impact Challenge. You can help by voting for them.

Victoria Hand Project in Google.org Impact Challenge | All3DP

Cucuyo is a 3D printed cafe, part installation, part eatery, at the Pérez Art Museum Miami where visitors can relax.

Cucuyo is a 3D Printed Cafe Opening at Pérez Art Museum Miami | All3DP

The leading 3D design and engineering software firm Autodesk has announced the resignation of CEO and President Carl Bass.

Autodesk CEO Carl Bass Steps Down As Company Undergoes Major Transition | All3DP

Early reviews for Kubo and the Two Strings indicate a stop-motion masterpiece. Is this 3D printed animation bound for Oscar glory in 2017?

Kubo And The Two Strings: Oscar Win for 3D Printed Animation? | All3DP

Do you ride your bike around a city without protection or lighting? Will Haude from 3D Brooklyn has created a 3D printed bike blinker for you.

3D Printed Bike Blinker Makes Your Ride A Lot Safer | All3DP

Researchers at Lawrence Livermore National Laboratory have developed a way to 3D print glass - at room temperature.

Lawrence Livermore National Laboratory Can 3D Print Glass at Room Temperature | All3DP

A student and industrial designer has developed a 3D printed hockey glove which includes antimicrobials for his graduate thesis.

Hockey is Made Safer With 3D Printed Antibacterial Gloves | All3DP

This is a clock design inspired by martial arts weaponry banned from playgrounds all over the world. What could possibly go wrong? Meet the Edgytokei, made with Arduino and 3D printing.

Edgytokei is a 3D Printed Clock Inspired by Nunchucks | All3DP

<html><head></head><body><div class="text-auto-link">
                                            <p>Comes in 2 scales, Tabletop and Titan! Titan version features the Dwarven Watchtower which can also be printed standalone in FDM while the Tabletop version features a rock diorama piece!</p>
<p>Tabletop version files come presupported!</p>
										</div>
                                    								</body></html>

The Scarlet Queen

 Comes in 2 scales, Tabletop and Titan! Titan version features the Dwarven Watchtower which can also be printed standalone in FDM while the Tabletop version features a rock diorama piece! Tabletop version files come presupported! 

<p>This safety shield is made from a 3mm acrylic sheet and an A4 PVC transparent sheet (200 Microns). We can also use 4.5mm acrylic sheet. To make this safety shield, using a laser cutter is the most time-efficient procedure.</p>


Laser Cut Safety Shield

This safety shield is made from a 3mm acrylic sheet and an A4 PVC transparent sheet (200 Microns). We can also use 4.5mm acrylic sheet. To make this safety shield, using a laser cutter is the most time-efficient procedure.


<html><head></head><body><div class="text-auto-link">
                                            <p>Disinfect it every time you come home</p>
<p>Improved design for easier breathing</p>
<p>&#xA0;</p>
<p>DISCLAIMER: This mask isn&apos;t medicaly tested so I can NOT guarantee that it will work</p>
										</div>
                                    								</body></html>

F..k Corona mask and bust

 Disinfect it every time you come home Improved design for easier breathing DISCLAIMER: This mask isn't medicaly tested so I can NOT guarantee that it will work 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><a href="/pages/support-scan-the-world" target="_blank" rel="noopener noreferrer"><img src="/uploads/tinymce-images/support.png" alt></a></p><p>The archival information for this sculpture is missing. We are currently researching this piece!<br>If you have any knowledge of this bust please get in touch at stw@myminifactory.com</p>
										</div>
										
                                    								</body></html>

Bull Wings

 The archival information for this sculpture is missing. We are currently researching this piece!If you have any knowledge of this bust please get in touch at stw@myminifactory.com 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><a href="https://www.patreon.com/ArtisanGuild">Visit us on Patreon!</a></p>
<p><strong>Pool of the Depths</strong></p>
<p>This set includes:</p>
<p>- 1 Highly Detailed Pool of the Depths (empty)<br>- 1 Highly Detailed Liquid with 3 Tentacles<br>- 1 Highly Detailed Liquid for Zyxrya<br>- Supported Files</p>
<p><a href="https://www.patreon.com/ArtisanGuild">Support us on Patreon Here</a><br>Join us to receive exclusive miniatures set each month for a very special price. You will also get a Welcome Box, containing a selection of figurines and scenaries, check the description on our Patreon page :)</p>
										</div>
										
                                    								</body></html>

Pool of the Depths - Depth One Reavers Terrain Piece

 Visit us on Patreon! Pool of the Depths This set includes: - 1 Highly Detailed Pool of the Depths (empty)- 1 Highly Detailed Liquid with 3 Tentacles- 1 Highly Detailed Liquid for Zyxrya- Supported Files Support us on Patreon HereJoin us to receive exclusive miniatures set each month for a very special price. You will also get a Welcome Box, containing a selection of figurines and scenaries, check the description on our Patreon page :) 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><strong>This is an entry for the Meshmix Competition. &#xA0;Vote for your favorite design by downloading it</strong>!</p>
<p>Mix from <a href="/object/venus-de-milo-at-louvre-paris-1657">Venus de Milo</a>&#xA0;and <a href="/object/michelangelo-s-david-in-florence-italy-2052">Michelangelo&apos;s David</a>&#xA0;made with Meshmixer during the MeshUpMix competitition.</p>
										</div>
										
                                    								</body></html>

David De Milo

 This is an entry for the Meshmix Competition. Vote for your favorite design by downloading it! Mix from Venus de Milo and Michelangelo's David made with Meshmixer during the MeshUpMix competitition. 

<html><head></head><body><div class="text-auto-link">
                                            <p>A perfect&#xA0;ON OFF Button for Beko Washing Machines</p>
<p>You will find 2 files in the .zip : 5920.stl for the original button and 5920v2.stl which is optimized for 3D printing, with a flat surface.</p>
										</div>
                                    								</body></html>

ON OFF Button for Beko Washing Machines

 A perfect ON OFF Button for Beko Washing Machines You will find 2 files in the .zip : 5920.stl for the original button and 5920v2.stl which is optimized for 3D printing, with a flat surface. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Dr. Jones. Again we see there is nothing you can possess which I cannot spend months obsessively recreating in plastic filament.</p>
<p>This has been an extremely time consuming project. Tried to make this as accurate as possible using predominantly primary source reference.&#xA0;</p>
<p>If you split this model in half down the centre then lay it down; it will print without supports. If you print the single model upright then you will need to turn supports on.</p>
<p>Finished model should be 7 3/4&quot;-8&quot; (190-200mm) in height. Scale accordingly.</p>
<p>I experimented with a number of different gold finishes. Plasticote gold spray paint isn&apos;t bad, about the same end result as rub&apos;n&apos;buff but easier to apply. I found the closest you can get to the vac-metalised finish of the original is a mirrored faux gold leaf. I applied this over a coat of the spray gold so any gaps in the application weren&apos;t so noticeable.</p>
										</div>
										
                                    								</body></html>

Chachapoyan Fertility Idol  - Indiana Jones

 Dr. Jones. Again we see there is nothing you can possess which I cannot spend months obsessively recreating in plastic filament. This has been an extremely time consuming project. Tried to make this as accurate as possible using predominantly primary source reference. If you split this model in half down the centre then lay it down; it will print without supports. If you print the single model upright then you will need to turn supports on. Finished model should be 7 3/4"-8" (190-200mm) in height. Scale accordingly. I experimented with a number of different gold finishes. Plasticote gold spray paint isn't bad, about the same end result as rub'n'buff but easier to apply. I found the closest you can get to the vac-metalised finish of the original is a mirrored faux gold leaf. I applied this over a coat of the spray gold so any gaps in the application weren't so noticeable. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Dear Community,&#xA0;</p>
<p>I present to you the Elite Blade from Monster Hunter Series, as it would be my entry design for the competition made possible by Capcom and MyMiniFactory teams.</p>
<p>The design is detailed after the Elite Blade, which works in dual mode, a Charge Blade in addition to a Shield &amp; Sword Combo.</p>
<p>Currently the size ratio of the blade is 1:14, hopefully one day I will be able to print it at its real size.</p>
<p><strong>Print Information:</strong></p>
<p>The Blade is about 28.7 cm in height, and weighs around 116.8 grams.</p>
<p>Total Print Time 21&#xA0;hours.</p>
<p>There are no supports required to be able to print this model of the elite sword as long as you print at the oroginal orientation.</p>
<p>All the parts are set in their original orientation I used for printing.</p>
<p>&#xA0;</p>
<p>Feel free to scale the size of the parts, but make sure to do it across all the parts identically.</p>
<p>&#xA0;</p>
<p><strong>Disclaimer,</strong></p>
<p>I acknowledge the terms of the competition and herby present the Elite Blade as my 2nd entry design, and may the best hunter wins!</p>
<p><strong>Abodizer89,</strong></p>
<p>&#xA0;</p>
										</div>
										
                                    								</body></html>

Monster Hunter - Elite Blade

 Dear Community, I present to you the Elite Blade from Monster Hunter Series, as it would be my entry design for the competition made possible by Capcom and MyMiniFactory teams. The design is detailed after the Elite Blade, which works in dual mode, a Charge Blade in addition to a Shield & Sword Combo. Currently the size ratio of the blade is 1:14, hopefully one day I will be able to print it at its real size. Print Information: The Blade is about 28.7 cm in height, and weighs around 116.8 grams. Total Print Time 21 hours. There are no supports required to be able to print this model of the elite sword as long as you print at the oroginal orientation. All the parts are set in their original orientation I used for printing. Feel free to scale the size of the parts, but make sure to do it across all the parts identically. Disclaimer, I acknowledge the terms of the competition and herby present the Elite Blade as my 2nd entry design, and may the best hunter wins! Abodizer89, 

<html><head></head><body><div class="text-auto-link">
                                            <p>this item is a remix of the baby yoda by Christopher Frieze and i added the ball to represent a sceen from the tv series the mandalorian.</p>
<p>&#xA0;</p>
<p>&#xA0;</p>
										</div>
                                    								</body></html>

baby yoda with ball

 this item is a remix of the baby yoda by Christopher Frieze and i added the ball to represent a sceen from the tv series the mandalorian. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>a simple holder with bolts for the Abus Granit 68 lock</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Devil+Desing++PETG&amp;tag=tv-auto-20" target="_blank">
                        Devil Desing  PETG                    </a>

                    Black
</body></html>

Abus Granit 68 Holder 

a simple holder with bolts for the Abus Granit 68 lock

3d printable model of Locomotive BR Standard Class 4 2-6-4T without texture.
The British Railways Standard Class 4 tank is a class of steam locomotive, one of the BR standard classes built during the 1950s. They were used primarily on commuter and outer suburban services

Locomotive BR Standard Class 4 2-6-4T

<html><head></head><body><div class="text-auto-link">
                                            <p>&#x5361;&#x62C9;&#x5361;&#x62C9;(&#x7CBE;&#x9748;&#x5BF6;&#x53EF;&#x5922;)<br>Cubone(Pok&#xE9;mon</p>
<p>Follow me here:<br>https://www.facebook.com/PatrickFanart.HK</p>
<div id="gtx-trans" style="position: absolute; left: -31px; top: -14px;">&#xA0;</div>
										</div>
                                    								</body></html>

Cubone(Pokemon)

 卡拉卡拉(精靈寶可夢)Cubone(Pokémon Follow me here:https://www.facebook.com/PatrickFanart.HK 

Thingscanner