Today is the Net Neutrality Day of Action in the USA. Thingiverse joins other digital businesses to raise awareness of a critical issue.

Thingiverse Takes Part in Net Neutrality Day of Action | All3DP

With their new composite "Hotflex", German computer scientists found a way to customize 3D prints after they have been printed.

Bend and Customize Finished 3D Prints with "Hotflex" Composite | All3DP

Made with natural, fresh ingredients, 3D printed food can be nutritious and delicious. Not convinced? Let's take a look at what's on the menu.

24 Examples of 3D Printed Food from Tomorrow's Kitchen | All3DP

With a little 3D printing and a lot of imagination, Jame Bruton from XRobots has created the Batman Electric Skateboard - or Batboard.

Maker Builds BatBoard, A Batman-Themed Electric Skateboard | All3DP

The Netherlands-based additive manufacturing company CEAD is creating an industrial-scale 3D printer that is specifically engineered to help produce parts for ships and other maritime vessels. 

CEAD Launches Industrial-Scale 3D Printer Tailored for Shipbuilding | All3DP

Company Made In Space is developing 3D printed satellites that can be manufactured in outer space and launched right into orbit.

3D Printed Satellites to be Made In Space | All3DP

The US Postal Service has released a juicy paper with great insights on 3D Printing and the future of manufacturing, logistics and shipping.

3D Printing and the Future of the Postal Service | All3DP

A new 3D models generator service promises extraction of characters from videos. Currently, it’s limited to animations.

3D Models Extracted From Video | All3DP

US package delivery company UPS is teaming up with enterprise software company SAP to branch out into a spare parts 3D printing business.

UPS Partners With SAP to Launch Spare Parts 3D Printing Business | All3DP

Filament producing company, Philament, released a product called Philament Glass Reinforced which does exactly what it says on the tin.

Philament Releases New Durable Glass Fiber Reinforced Filament | All3DP

Capturing 3D data and HDR imagery, the Leica Geosystem's ScanStation P50 can scan things over 1 kilometer away.

Leica Adds 3D Laser Scanner with 1km Range to Product Lineup | All3DP

The Chemical Brothers release new music video for "Wide Open", a heartwarming story about a dancing girl, an empty studio, and 3D printed voronoi patterns.

The Chemical Brothers "Wide Open" to 3D Printing in New Video | All3DP

<html><head></head><body><div class="text-auto-link">
                                            <p>YPS Cookie Cutter</p>
<p>02/23/2019 updated with smoother corners</p>
										</div>
                                    								</body></html>

YPS Cookie Cutter

 YPS Cookie Cutter 02/23/2019 updated with smoother corners 

<html><head></head><body><div class="text-auto-link">
                                            <p>3D PRINTABLE HOMEWEAR DESIGN CONTEST</p>
<p>I started imagining a simple and balanced design, with the same concept I then designed the small table</p>
										</div>
                                    								</body></html>

Siedi-TO

 3D PRINTABLE HOMEWEAR DESIGN CONTEST I started imagining a simple and balanced design, with the same concept I then designed the small table 

Mutant Ratmen

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>George Jetson, from the comic strip The Jetsons, by Hanna-Barbera.</p>
<p>George resides with his family and his dog Astro in Orbit City in the future. His personality is that of a well-meaning, caring father, but he is often befuddled and stressed out by the problems of both his work and family lives.</p>
<p>No supports are required. If you have the proper filament colors, no painting is needed.</p>
<p>The model is 260mm tall. Due to some small parts, the model should not be sized smaller, but can be sized larger without issue.</p>
<p>Enjoy!</p>
<p>-------------------------------------------------------</p>
<p>Print Settings<br>Printer: FlashForge Creator X</p>
<p>Rafts: Doesn&apos;t Matter</p>
<p>Supports: No</p>
<p>&#xA0;Resolution: .2mm</p>
<p>&#xA0;Infill: 10%</p>
<p>&#xA0;<br>Notes:</p>
<p>See below for helpful printing and assembly tips.</p>
<p>----------------------------------------------------------</p>
<p>Building the model<br>Colors (there are no multiple printed pieces)</p>
<p>Black:<br>eyebrows<br>eyeblacks<br>mouth<br>ring_top<br>ring_bottom<br>stripes<br>buckle<br>..<br>Beige or Flesh:<br>head<br>hand_left<br>hand_right<br>..<br>White:<br>shirt<br>shoes<br>arm_left<br>arm_right<br>eyewhites<br>..<br>Orange:<br>hair_top<br>hair_bottom<br>..<br>Blue:<br>pants<br>..<br>Green:<br>belt<br>..<br>Red:<br>tongue<br>..<br>Any color (hidden pieces)<br>pin_belt<br>pin_hair<br>..</p>
<p>----------------------------------------------------------</p>
<p>Printing and assembly tips</p>
<p>Printing tips<br>1-As with most of my models, no supports are required.</p>
<p>2-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish.</p>
<p>3-I did not require any rafts or brims for any of the parts, however use your judgement as some parts have small bases:<br>hand_left<br>hand_right<br>arm_left<br>arm_right</p>
<p>..<br>Assembly tips:<br>1-The left/right eyebrows are quite small and are actually modeled to fit a certain way, however since they are so small that as long as they look good it should be fine any way they are positioned.</p>
<p>2-The left/right eyewhites and left/right eyeblacks are interchangeable.</p>
<p>3-Before gluing the stripes and buckle, be sure to bend them a bit since they are being glued to a slightly rounded part.</p>
<p>4-If the rings around the pants are too snug, simply sand a tiny bit off the part that touches the pants. A tiny sanding makes a big difference in how high the rings fit.</p>
<p>5-Since there are a bunch of tiny black parts I printed two sets of each part. I knew I&apos;d drop and lose a part while putting the model together.</p>
<p>6-Refer to the assembly diagram for putting the model together. The model is meant to be glued.</p>
										</div>
										
                                    								</body></html>

George jetson

 George Jetson, from the comic strip The Jetsons, by Hanna-Barbera. George resides with his family and his dog Astro in Orbit City in the future. His personality is that of a well-meaning, caring father, but he is often befuddled and stressed out by the problems of both his work and family lives. No supports are required. If you have the proper filament colors, no painting is needed. The model is 260mm tall. Due to some small parts, the model should not be sized smaller, but can be sized larger without issue. Enjoy! ------------------------------------------------------- Print SettingsPrinter: FlashForge Creator X Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10% Notes: See below for helpful printing and assembly tips. ---------------------------------------------------------- Building the modelColors (there are no multiple printed pieces) Black:eyebrowseyeblacksmouthring_topring_bottomstripesbuckle..Beige or Flesh:headhand_lefthand_right..White:shirtshoesarm_leftarm_righteyewhites..Orange:hair_tophair_bottom..Blue:pants..Green:belt..Red:tongue..Any color (hidden pieces)pin_beltpin_hair.. ---------------------------------------------------------- Printing and assembly tips Printing tips1-As with most of my models, no supports are required. 2-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish. 3-I did not require any rafts or brims for any of the parts, however use your judgement as some parts have small bases:hand_lefthand_rightarm_leftarm_right ..Assembly tips:1-The left/right eyebrows are quite small and are actually modeled to fit a certain way, however since they are so small that as long as they look good it should be fine any way they are positioned. 2-The left/right eyewhites and left/right eyeblacks are interchangeable. 3-Before gluing the stripes and buckle, be sure to bend them a bit since they are being glued to a slightly rounded part. 4-If the rings around the pants are too snug, simply sand a tiny bit off the part that touches the pants. A tiny sanding makes a big difference in how high the rings fit. 5-Since there are a bunch of tiny black parts I printed two sets of each part. I knew I'd drop and lose a part while putting the model together. 6-Refer to the assembly diagram for putting the model together. The model is meant to be glued. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The same way you can modify the curve of the temples if you are not satisfied with the fitting.</p>
<p>For the best printing result it is advised to use PVA for support material. Otherwise, it is important to use the suggested settings below.</p>
<p>&#xA0;</p>
										</div>
										
                                    								</body></html>

Aviator Sunglasses

 This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The same way you can modify the curve of the temples if you are not satisfied with the fitting. For the best printing result it is advised to use PVA for support material. Otherwise, it is important to use the suggested settings below. 

<p>This fidget spinner is the solution to the Design Engine Week 7 Challenge: Design an object that expresses the beauty of math with the <em>reverse</em> of complex (so, simple) and <em>private</em> as the parameters.</p>


Nautilus Fidget Spinner

This fidget spinner is the solution to the Design Engine Week 7 Challenge: Design an object that expresses the beauty of math with the reverse of complex (so, simple) and private as the parameters.


<p>Watch it build!</p><p><br></p><p><iframe width="593" height="370" src="//www.youtube.com/embed/Qq2-deerKz4" frameborder="0" allowfullscreen></iframe></p>


UU 37 Train - Openttd

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I wanted a desktop charging stand for my iPhone that would work with the new MagSafe &quot;puck&quot; charger and keep it upright at a good viewing angle. So I made my own!</p>
<p>It&apos;ll hold the magSafe charging disc securely, and is open in the back to help pop it out if you need to. The base has three penny-sized holes that you can load up for extra weight, although I find that the strength of the magnet still means you have to hold the base when you remove your phone.</p>
<p>The USB-C cable has a nice path to pass through on the back to keep it out of the way.</p>
<p>Doesn&apos;t need supports!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Red
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed with Hatchbox Red PLA</p></div>
</body></html>

iPhone MagSafe Desktop Stand

I wanted a desktop charging stand for my iPhone that would work with the new MagSafe "puck" charger and keep it upright at a good viewing angle. So I made my own!

It'll hold the magSafe charging disc securely, and is open in the back to help pop it out if you need to. The base has three penny-sized holes that you can load up for extra weight, although I find that the strength of the magnet still means you have to hold the base when you remove your phone.

The USB-C cable has a nice path to pass through on the back to keep it out of the way.

Doesn't need supports!

<html><head></head><body><div class="text-auto-link">
                                            <div>
<p>A monk collection perfect for your tabletop game!&#xA0;</p>
<p>Want to access even more models not found here in Thingiverse? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250</p>
</div>
										</div>
                                    								</body></html>

Monk Collection!

 A monk collection perfect for your tabletop game! Want to access even more models not found here in Thingiverse? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 

<p>A phone holder for the desk or table top which can be used in portrait or landscape. <br>
It should fit some tablets as well.</p>


Phone holder

A phone holder for the desk or table top which can be used in portrait or landscape. 
It should fit some tablets as well.


<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>-Support my Patreon and receive&#xA0;40% off&#xA0;my entire MyMinifactory Library.<a href="https://www.patreon.com/minimonstermayhem"><strong>&#xA0;LINK</strong></a></p>
<p><strong>-All support files included</strong></p>
<p>2 poses of abyssal serpents. One pair and one solo. Surrounded by seaweed and a piece of wrecked ship</p>
<p>You will receive STLs, STL supported files, and lychee files.</p>
										</div>
										
                                    								</body></html>

Abyssal Serpent

 -Support my Patreon and receive 40% off my entire MyMinifactory Library. LINK -All support files included 2 poses of abyssal serpents. One pair and one solo. Surrounded by seaweed and a piece of wrecked ship You will receive STLs, STL supported files, and lychee files. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Lithophane Stand Super Simple.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=WOL3D+PLA&amp;tag=tv-auto-20" target="_blank">
                        WOL3D PLA                    </a>

                    White
</body></html>

Case for 90*120 Lithophane

Just my design of a Lithophane Stand Super Simple.

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>&#xA0;</p>
<p>This is my first creation made by me on Sketchup. It takes me a very long time so enjoy this prop :)</p>
<p>I included some photos of the stl to print.<br><br></p>
<p>Print in trasparent ABS/PLA the Light Ring and the Light Diffusor and place 5mm led in the prepared holes.</p>
<p>Enjoy!</p>
										</div>
										
                                    								</body></html>