Verus Art are using 3D printing to recreate famous paintings so everyone can enjoy the meticulous craft work of their favorite artists.

Verus Art: Reproducing Classical Art With 3D Printing | All3DP

Want to skid through the polar vortex on a DIY snowmobile? Learn how to make a remote-controlled 3D printed snowmobile created by Polish maker Nikodem Bartnik.

[Project] Shred in this 3D Printed Snowmobile | All3DP

After many high-profile scampaign and crowdfail incidents in 3D printing, new site FitForLaunch wants to change crowdfunding for the better.

Putting an End to the Scampaign & Crowdfail with FitForLaunch | All3DP

3D Hubs offers a two Fairphone 2 accessories: These are an amplifier and a nightstand/charging station will be 3D printed using Woodfill filament.

3D Printed Fairphone 2 Accessories Presented by 3D Hubs | All3DP

Your 3D printer has a "brain" to do the processing and the "muscle" to do the work, but it's the RAMPS 1.4 that connects them. Find out what makes your 3D printer tick.

RAMPS 1.4 3D Printer Controller Board – Review the Specs | All3DP

Looking for an easy way to organize your life? This 3D printable keytool will hold your keys, USB, a small ruler, a docking device for your phone, and even a bottle opener all in one place.  

[Project] Make Life Easier with the Pocket-Sized Keytool | All3DP

Du suchst nach "AutoCAD kostenlos" und möchtest die Vollversion? Hier findest du die Antwort auf die Frage: Gibt es eine kostenlose Vollversion von AutoCAD?

AutoCAD kostenlos: Gibt es eine kostenlose Vollversion? | All3DP

3D printer layer shifting isn't the most discussed print failure, but it certainly is among the most frustrating. Check out three easy ways to avoid it.

3D Printer Layer Shifting: 3 Easy Ways to Avoid It | All3DP

Download all 719 Pokemon 3D models for free. including all Pokemon Go 3D models, to 3D print your favorite tiny monster.

All Pokemon (Go) 3D Models for Free | All3DP

Are you fed up with blobs, strings, or jams? Check out this guide for three simple solutions that will fix your 3D printer over-extrusion problems forever!

3D Printer Over-Extrusion: 3 Simple Solutions | All3DP

Ah, video game statues! Without them, your desk would look so empty. We’ve assembled the most adorable video game statues for 3D printing.

10 Most Amazing Video Game Characters to 3D Print | All3DP

¿Ves algo raro en tus impresiones 3D? ¡Quizás necesitas calibrar el extrusor! Sigue leyendo y descubre cómo hacerlo.

Calibrar el extrusor (impresora 3D): 6 etapas fáciles | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A simple halyard clothespin for J/70, Melges, Viper, etc</p></div>
</body></html>

halyard clothespin

A simple halyard clothespin for J/70, Melges, Viper, etc

<html><head></head><body><div class="text-auto-link">
                                            <p>For best results, print with <a href="https://www.matterhackers.com/store/c/PRO%20Series%20ABS?aff=7417">MatterHackers PRO Series ABS</a></p>
<p>Makerbot E3D Hotend Swap printed parts. Includes designs for single and dual extruders (ie. Replicator 2 and 2X)</p>
										</div>
                                    								</body></html>

Makerbot E3D Hotend Swap Kit

 For best results, print with MatterHackers PRO Series ABS Makerbot E3D Hotend Swap printed parts. Includes designs for single and dual extruders (ie. Replicator 2 and 2X) 

<p><iframe width="593" height="370" src="//www.youtube.com/embed/1QY6nZaLJlc" frameborder="0" allowfullscreen></iframe></p>

<p>This is a 3D printed truck riser with integrated NeoPixel LEDs. These headlights are bluetooth controlled via iOS/Android Bluefruit app. Wanna build one? Parts and full instructions are listed in the learning guide: <a href="https://learn.adafruit.com/3d-printed-truck-risers-with-neopixel-leds/3d-printing" rel="external">https://learn.adafruit.com/3d-printed-truck-risers-with-neopixel-leds/3d-printing</a></p>

<p>Adafruit Feather Bluefruit nRF52<br>
<a href="https://www.adafruit.com/product/3406" rel="external">https://www.adafruit.com/product/3406</a></p>

<p>8x NeoPixel Stick<br>
<a href="https://www.adafruit.com/product/1426" rel="external">https://www.adafruit.com/product/1426</a></p>


NeoPixel LED Truck Riser for Skateboard Longboard



This is a 3D printed truck riser with integrated NeoPixel LEDs. These headlights are bluetooth controlled via iOS/Android Bluefruit app. Wanna build one? Parts and full instructions are listed in the learning guide: https://learn.adafruit.com/3d-printed-truck-risers-with-neopixel-leds/3d-printing

Adafruit Feather Bluefruit nRF52
https://www.adafruit.com/product/3406

8x NeoPixel Stick
https://www.adafruit.com/product/1426


<p>The business card here:</p><p><a href="http://www.thingiverse.com/thing:1578" rel="external">http://www.thingiverse.com/thing:1578</a></p><p>did&#xA0;not&#xA0;have&#xA0;the&#xA0;source files&#xA0;so&#xA0;it&#xA0;was&#xA0;difficult&#xA0;to&#xA0;change the&#xA0;text and&#xA0;needed&#xA0;support&#xA0;to&#xA0;print&#xA0;on&#xA0;a&#xA0;FDM&#xA0;printer.&#xA0;I made&#xA0;the&#xA0;following&#xA0;changes:</p><p>-&#xA0;Scaled&#xA0;up all&#xA0;components&#xA0;by&#xA0;25.4x&#xA0;to&#xA0;convert&#xA0;from&#xA0;inches&#xA0;to&#xA0;mm<br>- completely&#xA0;remade&#xA0;the&#xA0;card&#xA0;back&#xA0;in openscad&#xA0;to&#xA0;replace&#xA0;the&#xA0;holes&#xA0;with&#xA0;pegs&#xA0;and&#xA0;allow&#xA0;for&#xA0;alternative&#xA0;txt<br>-&#xA0;scaled&#xA0;the&#xA0;inner&#xA0;planetary&#xA0;gears&#xA0;by&#xA0;0.98&#xA0;so&#xA0;it&#xA0;meshes&#xA0;better<br><br></p><p>Have&#xA0;fun!</p>


Business card with planetary gears

The business card here:http://www.thingiverse.com/thing:1578did not have the source files so it was difficult to change the text and needed support to print on a FDM printer. I made the following changes:- Scaled up all components by 25.4x to convert from inches to mm- completely remade the card back in openscad to replace the holes with pegs and allow for alternative txt- scaled the inner planetary gears by 0.98 so it meshes betterHave fun!


<p>This is my first upload<br>
here and my first upload for a 3D print.<br>
</p><p>Hopefully I have don it<br>
good. I have also not a print machine, so I am not an professional<br>
expert in 3D printing.</p><br>
<p>Please don&apos;t be too<br>
rigorous if its not like it &apos;s has to be, but of course I should be<br>
pleased with comments, if you like it, if you don&apos;t like it, if you<br>
gonna print it and technical information comments.</p><br>
<p>I can hardly write Dutch,<br>
so please don&apos;t expect that I give in five minutes reaction in<br>
English, if you post a comment.</p><br>
<p><br><br>
</p><br>
<p>I like to design things,<br>
if you are happy with the design and you want to print it, I m also<br>
happy.</p><br>
<p><br><br>
</p><br>
<p>Till the next design!</p><p></p>


LipsEen

This is my first upload
here and my first upload for a 3D print.
Hopefully I have don it
good. I have also not a print machine, so I am not an professional
expert in 3D printing.
Please don't be too
rigorous if its not like it 's has to be, but of course I should be
pleased with comments, if you like it, if you don't like it, if you
gonna print it and technical information comments.
I can hardly write Dutch,
so please don't expect that I give in five minutes reaction in
English, if you post a comment.


I like to design things,
if you are happy with the design and you want to print it, I m also
happy.


Till the next design!


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Whats</h3>
<p>It&apos;s a spacer or packing of the VPCOK chopper/ food processor&#x2193;.<br>
It&apos;ll be improvement for the &quot;Backflow issue&quot; of this type of food processor.<br>
Enjoy!</p>
<p>VPCOK &#x306E; &#x30D5;&#x30FC;&#x30C9;&#x30D7;&#x30ED;&#x30BB;&#x30C3;&#x30B5;&#x30FC; Vpcok &#x307F;&#x3058;&#x3093;&#x5207;&#x308A;&#x5668; &#x96FB;&#x52D5; &#x30DF;&#x30AD;&#x30B5;&#x30FC; 4&#x679A;&#x30D6;&#x30EC;&#x30FC;&#x30C9; 600W 2&#x3064;&#x30E2;&#x30FC;&#x30C9; &#x5927;&#x5BB9;&#x91CF; 1.2L 1~4&#x4EBA;&#x306B;&#x9069;&#x7528; &#x30DF;&#x30F3;&#x30C1; &#x304D;&#x3056;&#x3080; &#x304A;&#x308D;&#x3059; &#x96E2;&#x4E73;&#x98DF; &#x30B9;&#x30E0;&#x30FC;&#x30B8;&#x30FC; &#x6C37; &#x7815;&#x3051;&#x308B;<br><a rel="nofollow" href="https://amzn.to/2HsKWLg?tag=tv-auto-20">https://amzn.to/2HsKWLg</a></p></div>
</body></html>

VPCOK FOOD CHPPER PACKING

<H1>Whats</H1>

It's a spacer or packing of the VPCOK chopper/ food processor↓.
It'll be improvement for the "Backflow issue" of this type of food processor.
Enjoy!

VPCOK の フードプロセッサー Vpcok みじん切り器 電動 ミキサー 4枚ブレード 600W 2つモード 大容量 1.2L 1~4人に適用 ミンチ きざむ おろす 離乳食 スムージー 氷 砕ける
 https://amzn.to/2HsKWLg

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>2014 Halloween Design Competition entry- Halloween props</p>
<p>&#xA0;</p>
<p>It was a dark night, because it was night. The moon was a blaze all in white. As my boat broke the waters edge I felt a warm slithering touch on my head. I turned to see a young woman&apos;s face with stringy hair, wet and stuck on her neck. &quot;Bleck!&quot; I said, &quot;You smell of old pennies.&quot; The slithery touch grew cover my arm and back, then I felt a sharp pull. I resisted and swung my arms wildly like a child throwing a fit after boom boom. The girl wasn&apos;t a girl but a lore for some beast and the touch were tentacles! My arms managed to tear away the beasts flimsy appendages. So i made this. A crown of tentacles left over from the beast. A crown of tentacles. Totally awesome and meant to be worn.</p>
										</div>
										
                                    								</body></html>

Tenticle Crown  of  Horror

 2014 Halloween Design Competition entry- Halloween props It was a dark night, because it was night. The moon was a blaze all in white. As my boat broke the waters edge I felt a warm slithering touch on my head. I turned to see a young woman's face with stringy hair, wet and stuck on her neck. "Bleck!" I said, "You smell of old pennies." The slithery touch grew cover my arm and back, then I felt a sharp pull. I resisted and swung my arms wildly like a child throwing a fit after boom boom. The girl wasn't a girl but a lore for some beast and the touch were tentacles! My arms managed to tear away the beasts flimsy appendages. So i made this. A crown of tentacles left over from the beast. A crown of tentacles. Totally awesome and meant to be worn. 

A7V Tissue Case

<html><head></head><body><div class="text-auto-link">
                                            <p>Oni inspired wall piece</p>
										</div>
                                    								</body></html>

Oni wall piece

<html><head></head><body><div class="text-auto-link">
                                            <p>Visit www.clickaloo.com/playset/buggy for assembly instructions!</p>
										</div>
                                    								</body></html>

Clickaloo Buggy

 Visit www.clickaloo.com/playset/buggy for assembly instructions! 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><strong>README</strong><br>I have created this set with dogs of 20.0mm, 19.9mm, about 3/4&apos;&apos; (19.0mm) and slightly less than 3/4&apos;&apos; (18.9mm) diameter. Just check my uploads and find the set you&apos;ll need.<br>This is the 18.9mm set for 3/4&apos;&apos; (19.0mm) dogholes.</p>
<p>If you need any other types of bench dogs / stops / clamps, need some different dimensions, have some neat ideas or the like then drop a comment and I&apos;ll see what can be done.</p>
<p><strong>Project Background</strong><br>A while ago I made a super nice mobile work bench heavily inspired by the Stanton Bench which is in turn inspired by the Festool MFT system. It&apos;s basically a 18mm / 3/4&apos;&apos; thick top with a bunch of 20mm holes in a 96mm pattern which a variety of tools and attachments can be used with to attack / secure pretty much anything to safely work with.</p>
<p>A major part of this system are bench dogs, and as the metal ones can be quite expensive and you don&apos;t necessarily need that much strength in most tasks I figured I&apos;d design and print a set. Same goes for a variety of additional accessories which seemed useful or neat to have.</p>
<p>An added bonus is that if you slip with whatever power tool you&apos;re working and hit the bench dogs, the plastic probably won&apos;t damage your tool unlike metal bench accessories would.</p>
<p><strong>Project Contents</strong><br><strong>General Information</strong><br>So far this set includes regular bench dogs, stop dogs with a flat side, corner dogs with a 90&#xB0; open corner, angle dogs with a 90&#xB0; top angle, flat stops, corner stops, repeat stops, planing stops and a cam clamp.<br> There&apos;s versions of almost all of these with or without M6 throughholes for permanent fixture (or for attaching other stuff on top or something) and versions with straight walls or a 5&#xB0; tilt to press the workpiece down towards the workbench. Often there&apos;s variations in some dimensions, too. If there aren&apos;t and you need some, drop me a comment and I should be able to provide it.</p>
<p>I&apos;ve printed a bunch of them and so far they&apos;ve been holding up rather well. In fact I most often just grab these instead of my actual metal bench dogs unless I really need the sturdiness or precision that my metal ones offer.</p>
<p><strong>Parts / File Overview</strong></p>
<ul>
<li>Standard Dogs
<ul>
<li>Filename:<br>StandardDog[OptionalModifier]_Height_[OptionalTaper].stl</li>
<li>25mm diameter top</li>
<li>Various heights available</li>
<li>Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper</li>
</ul>
</li>
<li>Stop Dogs
<ul>
<li>Filename:<br>StopDog[OptionalModifier]_Height_[OptionalTaper].stl</li>
<li>25mm diameter top with one flat side</li>
<li>Various heights available</li>
<li>Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper</li>
</ul>
</li>
<li>Polygonal Stop Dogs
<ul>
<li>Filename:<br>PolygonalStopDog_MinimumToMaximumExtension_Height_[OptionalTaper].stl</li>
<li>5-sided asymetrical stop dog with each numbered side increasing in 5mm increments</li>
<li>Designed to work well with Cam Clamp and Pressure Pad</li>
</ul>
</li>
<li>Corner Dogs
<ul>
<li>Filename:<br>CornerDog[OptionalModifier]_OpeningAngle_Height_[OptionalTaper].stl</li>
<li>Rounded part has a 25mm diameter</li>
<li>Comes with an opening of a given angle to hold corners of pieces</li>
<li>Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper</li>
</ul>
</li>
<li>Angle Dogs
<ul>
<li>Filename:<br>AngleDog[OptionalModifier]_TopOpeningAngle_widthXdepthXheight.stl or AngleDogTop[OptionalModifier]_TopOpeningAngle_widthXdepthXheight.stl</li>
<li>Dog with an angled opening on the top to hold square, rectangular or round stock for cutting, drilling and planing (potentially using a clamp from the top)</li>
<li>For better support at the end (e.g. towards Stop Dogs, Planing Stops, ...) or for clamping a file without the peg is provided, named AngleDogTop[...].stl</li>
<li>Various sizes available</li>
</ul>
</li>
<li>(Double) Straight and Corner Stops
<ul>
<li>Filename:<br>StraightStop_Height.stl or DoubleStraightStop_Height.stl or CornerStop_Height.stl or DoubleCornerStop_Height.stl</li>
<li>25mm diameter top</li>
<li>Straight or 90 degree corner stops, e.g. to clamp workpieces against</li>
<li>Regular stops span two holes, double stops span over three holes in the 96x96mm grid pattern</li>
<li>Requires very accurate 96x96mm doghole pattern or it won&apos;t fit</li>
</ul>
</li>
<li>Planing Stop
<ul>
<li>Filename:<br>PlaningStopDog.stl and PlaningStopRail_widthXheightXlength.stl</li>
<li>Consists of special dogs with a dovetail fit to rails of various lengths</li>
<li>Rails have one 90 degree side and one 85 degree side (5 degree taper)</li>
<li>Low height planing stops are especially well-suited for planing thinner stock</li>
<li>Due to sliding rail it&apos;s well-suited to setups diverging from 96x96mm doghole pattern (or for inaccurate ones) and can also be positioned in various angles, most notably 45 degrees by using diagonal holes</li>
</ul>
</li>
<li>Repeat Stop
<ul>
<li>Filename:<br>RepeatStopFixingPost_Height_RodDiameter.stl and RepeatStopPlate_widthXheightXdepth.stl</li>
<li>Requires 12X250mm rod (metal / plastic / wood), 2x M4x10x6 threaded brass insert, 2x M4x20 thumbscrew and 1x M4x20 screw (preferably cylinder head, though countersunk works, too)</li>
<li>Consists of two special dogs with 25mm diameter tops which have holes for a 12x250mm rod to go through, as well as an opening for an M4x10x6 threaded brass insert for use with an M4 thumbscrew to secure the rod in place and a stop plate against which your workpiece can be pressed against</li>
<li>Rod can be made from metal, wood or plastic. I used a 12x250mm aluminium rod which I threaded and tapped for an M4x20 screw 6mm from one end of the rod to attach the stop plate. If wood or plastic is used you can directly drive a screw into the rod, or you can just glue it in place if you don&apos;t need to be able to change the stop plate.</li>
</ul>
</li>
<li>Cam Clamp
<ul>
<li>Filenames:<br>CamClamp_Height_MinimumToMaximumExtension_[OptionalTaper].stl<br>CamClampPressurePad_Height_[OptionalTaper].stl</li>
<li>(Relatively) Low-height lever to fix your workpieces in place</li>
<li>Using the Pressure Pad makes the Cam Clamp work even better</li>
<li>Works well with Polygonal Stop Dogs (can clamp to 0mm)</li>
</ul>
</li>
<li>Standoff Cookie
<ul>
<li>Filenames:<br>StandoffCookie_diameterXheight.stl<br>StandoffCookie_diameterXheight_AntiSlipCuttingTemplate.stl</li>
<li>Modified bench cookies</li>
<li>Use self-adhesive EPDM foam for anti-slip properties (works great, I recommend using 1-3mm thick EPDM foam)</li>
<li>Can be used simply for anti-slip purposes, lifting the workpiece from the work surface to not cut into the work surface and more</li>
<li>Have a 25mm diameter recess to fit over Standard Dogs (with / without throughhole) so you can raise workpieces even higher to e.g. use a jigsaw, or to absolutely prevent any lateral movement</li>
</ul>
</li>
<li>Thumbscrews
<ul>
<li>Filename:<br>ThumbscrewM6[TYPE]_[ContactSurfaceDiameter].stl</li>
<li>For securing various throughhole dogs or other components with M6 screws</li>
<li>Nut types to fit an M6 nut</li>
<li>Bolt types to fit an M6 bolt</li>
<li>NutBoltHybrid can be used either way</li>
<li>ContactSurfaceDiameter described the diameter of the surface which will press against the work surface around the dog hole. Frankly, bigger is better so the 34mm NutBoltHybrid is probably the best choice</li>
<li>If the nut is to be permanently secured, the NutPlug can be glued in after inserting the nut</li>
</ul>
</li>
<li>Bench Legs
<ul>
<li>Filenames:<br>BenchLeg_height.stl<br>BenchLegExtension_height.stl<br>BenchLeg_AntiSlipCuttingTemplate.stl</li>
<li>If a Stanton Bench, Multi Function Slab or similar style of work surface is being used, the bench legs offer a convienient way to place the work surface on the ground or another table</li>
<li>Use self-adhesive EPDM foam for anti-slip properties (works great, I recommend using 1-3mm thick EPDM foam)</li>
</ul>
</li>
</ul>
										</div>
										
                                    								</body></html>

3/4'' / 19mm (18.9mm) Bench Dog Set with Levers, Cams, Stops, etc

 READMEI have created this set with dogs of 20.0mm, 19.9mm, about 3/4'' (19.0mm) and slightly less than 3/4'' (18.9mm) diameter. Just check my uploads and find the set you'll need.This is the 18.9mm set for 3/4'' (19.0mm) dogholes. If you need any other types of bench dogs / stops / clamps, need some different dimensions, have some neat ideas or the like then drop a comment and I'll see what can be done. Project BackgroundA while ago I made a super nice mobile work bench heavily inspired by the Stanton Bench which is in turn inspired by the Festool MFT system. It's basically a 18mm / 3/4'' thick top with a bunch of 20mm holes in a 96mm pattern which a variety of tools and attachments can be used with to attack / secure pretty much anything to safely work with. A major part of this system are bench dogs, and as the metal ones can be quite expensive and you don't necessarily need that much strength in most tasks I figured I'd design and print a set. Same goes for a variety of additional accessories which seemed useful or neat to have. An added bonus is that if you slip with whatever power tool you're working and hit the bench dogs, the plastic probably won't damage your tool unlike metal bench accessories would. Project ContentsGeneral InformationSo far this set includes regular bench dogs, stop dogs with a flat side, corner dogs with a 90° open corner, angle dogs with a 90° top angle, flat stops, corner stops, repeat stops, planing stops and a cam clamp. There's versions of almost all of these with or without M6 throughholes for permanent fixture (or for attaching other stuff on top or something) and versions with straight walls or a 5° tilt to press the workpiece down towards the workbench. Often there's variations in some dimensions, too. If there aren't and you need some, drop me a comment and I should be able to provide it. I've printed a bunch of them and so far they've been holding up rather well. In fact I most often just grab these instead of my actual metal bench dogs unless I really need the sturdiness or precision that my metal ones offer. Parts / File Overview Standard Dogs Filename:StandardDog[OptionalModifier]_Height_[OptionalTaper].stl 25mm diameter top Various heights available Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper Stop Dogs Filename:StopDog[OptionalModifier]_Height_[OptionalTaper].stl 25mm diameter top with one flat side Various heights available Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper Polygonal Stop Dogs Filename:PolygonalStopDog_MinimumToMaximumExtension_Height_[OptionalTaper].stl 5-sided asymetrical stop dog with each numbered side increasing in 5mm increments Designed to work well with Cam Clamp and Pressure Pad Corner Dogs Filename:CornerDog[OptionalModifier]_OpeningAngle_Height_[OptionalTaper].stl Rounded part has a 25mm diameter Comes with an opening of a given angle to hold corners of pieces Available as solid dogs, with a throughhole for M6 screws, and / or with a 5 degree taper Angle Dogs Filename:AngleDog[OptionalModifier]_TopOpeningAngle_widthXdepthXheight.stl or AngleDogTop[OptionalModifier]_TopOpeningAngle_widthXdepthXheight.stl Dog with an angled opening on the top to hold square, rectangular or round stock for cutting, drilling and planing (potentially using a clamp from the top) For better support at the end (e.g. towards Stop Dogs, Planing Stops, ...) or for clamping a file without the peg is provided, named AngleDogTop[...].stl Various sizes available (Double) Straight and Corner Stops Filename:StraightStop_Height.stl or DoubleStraightStop_Height.stl or CornerStop_Height.stl or DoubleCornerStop_Height.stl 25mm diameter top Straight or 90 degree corner stops, e.g. to clamp workpieces against Regular stops span two holes, double stops span over three holes in the 96x96mm grid pattern Requires very accurate 96x96mm doghole pattern or it won't fit Planing Stop Filename:PlaningStopDog.stl and PlaningStopRail_widthXheightXlength.stl Consists of special dogs with a dovetail fit to rails of various lengths Rails have one 90 degree side and one 85 degree side (5 degree taper) Low height planing stops are especially well-suited for planing thinner stock Due to sliding rail it's well-suited to setups diverging from 96x96mm doghole pattern (or for inaccurate ones) and can also be positioned in various angles, most notably 45 degrees by using diagonal holes Repeat Stop Filename:RepeatStopFixingPost_Height_RodDiameter.stl and RepeatStopPlate_widthXheightXdepth.stl Requires 12X250mm rod (metal / plastic / wood), 2x M4x10x6 threaded brass insert, 2x M4x20 thumbscrew and 1x M4x20 screw (preferably cylinder head, though countersunk works, too) Consists of two special dogs with 25mm diameter tops which have holes for a 12x250mm rod to go through, as well as an opening for an M4x10x6 threaded brass insert for use with an M4 thumbscrew to secure the rod in place and a stop plate against which your workpiece can be pressed against Rod can be made from metal, wood or plastic. I used a 12x250mm aluminium rod which I threaded and tapped for an M4x20 screw 6mm from one end of the rod to attach the stop plate. If wood or plastic is used you can directly drive a screw into the rod, or you can just glue it in place if you don't need to be able to change the stop plate. Cam Clamp Filenames:CamClamp_Height_MinimumToMaximumExtension_[OptionalTaper].stlCamClampPressurePad_Height_[OptionalTaper].stl (Relatively) Low-height lever to fix your workpieces in place Using the Pressure Pad makes the Cam Clamp work even better Works well with Polygonal Stop Dogs (can clamp to 0mm) Standoff Cookie Filenames:StandoffCookie_diameterXheight.stlStandoffCookie_diameterXheight_AntiSlipCuttingTemplate.stl Modified bench cookies Use self-adhesive EPDM foam for anti-slip properties (works great, I recommend using 1-3mm thick EPDM foam) Can be used simply for anti-slip purposes, lifting the workpiece from the work surface to not cut into the work surface and more Have a 25mm diameter recess to fit over Standard Dogs (with / without throughhole) so you can raise workpieces even higher to e.g. use a jigsaw, or to absolutely prevent any lateral movement Thumbscrews Filename:ThumbscrewM6[TYPE]_[ContactSurfaceDiameter].stl For securing various throughhole dogs or other components with M6 screws Nut types to fit an M6 nut Bolt types to fit an M6 bolt NutBoltHybrid can be used either way ContactSurfaceDiameter described the diameter of the surface which will press against the work surface around the dog hole. Frankly, bigger is better so the 34mm NutBoltHybrid is probably the best choice If the nut is to be permanently secured, the NutPlug can be glued in after inserting the nut Bench Legs Filenames:BenchLeg_height.stlBenchLegExtension_height.stlBenchLeg_AntiSlipCuttingTemplate.stl If a Stanton Bench, Multi Function Slab or similar style of work surface is being used, the bench legs offer a convienient way to place the work surface on the ground or another table Use self-adhesive EPDM foam for anti-slip properties (works great, I recommend using 1-3mm thick EPDM foam) 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth).</p>
<p>You will need 6 magnets and have to print the model twice.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Semi-closed 4Max</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        PLA PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The magnets go in with a pressure fit. Push the magnet in by hand as far as you can, then lay the holder flat on the table and apply pressure until the magnet snaps into place.</p></div>
</body></html>

Whiteboard marker holder

A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth).

You will need 6 magnets and have to print the model twice.


<html><head></head><body><div class="text-auto-link">
                                            <p>This is the low res ver.</p>
<p>For full res please visit https://www.cgtrader.com/3d-print-models/miniatures/figurines/chubby-deadpool</p>
										</div>
                                    								</body></html>