The Coolest Cooler blitzed its prototyping phase by partnering with Studio Fathom to create a 3D printed product in just a few days.

The Coolest Cooler Advanced Prototype was 3D Printed | All3DP

Retro-future 80s cyberpunk short film "Attack of the Cyber Octopuses" just went into production - with a lot of help of 3D printing.

3D Printed Cyber Octopuses Star in Retro-Future Sci-Fi Movie | All3DP

Will doctors use an origami-inspired 3D printed surgical tool next time you're on the operating table? Crane or frog?

3D Printed Surgical Tool Inspired By Origami | All3DP

A start-up company has brought out a 3D printing robot, called Addibot, which will be able to zoom around a city, mending uneven road surfaces.

Addibot: Mobile 3D Printer Eliminates Potholes | All3DP

Add a little spice to your hobby crafts with designer Christophe Laimer's guide to build your own powerful 600W brushless motor.

3D Print Your Own Powerful Brushless Motor | All3DP

Available to download on Pinshape, Inhalo is a 3D printed asthma inhaler with a discreet design that's stylish and practical.

Inhalo is a Stylish 3D Printed Asthma Inhaler | All3DP

Now you can order a customizable 3D printed Spartan. It represents the character you’ve been playing in the last few weeks.

Halo 5: Customize And 3D Print Your Spartan | All3DP

If you've always been frustrated when it comes to solving a Rubik's Cube, there is now a robot which can fix this problem in under two seconds!

3D Printed Robot Solves a Rubik's Cube in Under Two Seconds | All3DP

New York-based artist Jonathan Brand creates life-size 3D printed 1972 Honda CB500 motorcycle with just two Ultimaker 3D printers.

Artist 3D Prints Life-Size 1972 Honda CB500 Motorcycle | All3DP

Sinterex is using 3D printing to quickly produce dental implant bridges, but the UAE is also pushing for more 3D printed change in dentistry.

Sinterex Develops 3D Printed Dental Implant Bridges | All3DP

The popular and established Ultimaker 2 got a big brother. Read this Ultimaker 2 Extended review to find out how the test turned out.

Ultimaker 2 Extended Review: The Big Brother | All3DP

MIT chemists apply living polymerization technique to 3D printing; objects whose chemical composition and mechanical properties can change.

Living Polymerization: MIT Creates Adaptable 3D Printing | All3DP

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Having to flee her village due to an orc raid, Ember Stream was orphaned and has since been living inside a volcano.</p>
<p>Being in this environment for the past months hasn&#x2019;t been easy and it&#x2019;s taken its toll on her. She&#x2019;s become cocky and a bit crazy with a temper. Now calling herself the Lava Princess, she easily gets angry about trivial things, especially when food is scarce and there&#x2019;s nothing to hunt.</p>
<p>However, Ember Stream is a great sorceress who mastered the art of fire combat at a very young age, and now uses her skills to defend from the creatures and monsters that dwell inside the volcano.<br>-</p>
<p>Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.</p>
<p>patreon.com/castnplay</p>
										</div>
										
                                    								</body></html>

Ember Stream (Pre-Supported)

 Having to flee her village due to an orc raid, Ember Stream was orphaned and has since been living inside a volcano. Being in this environment for the past months hasn’t been easy and it’s taken its toll on her. She’s become cocky and a bit crazy with a temper. Now calling herself the Lava Princess, she easily gets angry about trivial things, especially when food is scarce and there’s nothing to hunt. However, Ember Stream is a great sorceress who mastered the art of fire combat at a very young age, and now uses her skills to defend from the creatures and monsters that dwell inside the volcano.- Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack. patreon.com/castnplay 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hi everyone,</p>
<p>i have made a remix of the daveposh concept for my Hercules HD Twist webcam mounted on a 16x16mm frame.</p>
<p>You can find the original parts by this link below:<br><a rel="nofollow" href="/thing:2368146">https://www.thingiverse.com/thing:2368146</a></p>
<p>Enjoy it !</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSUN+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        eSUN PLA+                    </a>

                    Yellow
</body></html>

Custom Ball and Socket Webcam Mount Hercules HD Twist

Hi everyone,

i have made a remix of the daveposh concept for my Hercules HD Twist webcam mounted on a 16x16mm frame.

You can find the original parts by this link below:
https://www.thingiverse.com/thing:2368146

Enjoy it !





<p><iframe width="593" height="370" src="//www.youtube.com/embed/rMRpNEzkMhQ" frameborder="0" allowfullscreen></iframe></p>

<p><iframe width="593" height="370" src="//www.youtube.com/embed/4HkoPjFFWJA" frameborder="0" allowfullscreen></iframe></p>

<p>Hello guys, please show me your 3d prints. <br>
Print the model and than please make a photo and post it under &quot;Post a Make&quot;. <br>
I hope to see a lot of your Makes!</p>

<p>Discover my other jtronics designs <a href="https://www.youmagine.com/jtronics/designs" rel="external">https://www.youmagine.com/jtronics/designs</a></p>



<p>Website: <a href="http://www.jtronics.de/" rel="external">http://www.jtronics.de/</a><br>
Instagram: <a href="https://www.instagram.com/jtronics.de/" rel="external">https://www.instagram.com/jtronics.de/</a><br>
Youtube: <a href="https://www.youtube.com/jtronicsTV" rel="external">https://www.youtube.com/jtronicsTV</a><br>
Twitter: <a href="https://twitter.com/jtronics2" rel="external">https://twitter.com/jtronics2</a><br>
Facebook: <a href="https://www.facebook.com/jtronics.de/" rel="external">https://www.facebook.com/jtronics.de/</a></p>


Flexi Articulated Mini Seadog Seal





Hello guys, please show me your 3d prints. 
Print the model and than please make a photo and post it under "Post a Make". 
I hope to see a lot of your Makes!

Discover my other jtronics designs https://www.youmagine.com/jtronics/designs



Website: http://www.jtronics.de/
Instagram: https://www.instagram.com/jtronics.de/
Youtube: https://www.youtube.com/jtronicsTV
Twitter: https://twitter.com/jtronics2
Facebook: https://www.facebook.com/jtronics.de/


<p style="box-sizing: inherit; margin: 0px 0px 20px; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">Model dimensions:</p>

<ul style="box-sizing: inherit; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">
	<li style="box-sizing: inherit;">length &#x2013; 1285 mm</li>
	<li style="box-sizing: inherit;">height &#x2013; 450 mm</li>
	<li style="box-sizing: inherit;">width - 50 mm</li>
</ul>


Scissor blades Kill La Kill

Model dimensions:


	length – 1285 mm
	height – 450 mm
	width - 50 mm



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple printable UV cure light chamber for resin printing. 150mm inner diameter by 200mm tall, sized to fit common turntable and 60w-405nm LED light. Friction fit for turntable and light. Print top first and measure for LED light fit. Scale other parts to match in slicer. No overhangs over 45 degrees- does not require supports to print. PETG, ABS, or UV Stabilized PLA recommended.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Overture+PETG&amp;tag=tv-auto-20" target="_blank">
                        Overture PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used PETG for UV resistance, but PLA or ABS will work. You will need a buildable area of 160mmx160mmx160mm. Expect to use about 0.5 kg of filament with 25% infill. 0.2mm or thicker z steps recommended to reduce print time. There are no fine details, but for best fitment please calibrate Zsteps (extrusion) before printing so that flanges fit well. If you are worried about it, print the top or base first, then print the first 5 or so layers of the cylinder, then stop it and use the resulting ring as a gauge to test the fit. The base has feet to reduce the likelyhood of warping during printing and to sit flat on the table. The feet will print correctly without supports as long as reasonable extruder calibration has been performed.</p>
<p>Base may be omitted if you do not need a turntable. Top to cylinder is mild friction fit- scale cylinder up by 5% if you do not want friction fit.The base has clearance to allow for easy lift-off of the cylinder and top to insert and remove the model. Top and base flanges have a 2.5% draft angle to help seal in UV light. You may line the inside of the cylinder with foil tape if desired for better dispersion. Support are not necessary if all parts are printed with the &quot;bottom&quot; on the build plate.Top and base may also fit 6&quot; DWV ABS or PVC pipe if you choose not to print the cylinder.</p>
<p>If you choose not to friction fit the light, it may be retained by using silicone caulking or hot glue. If you friction fit it, you can pop it off and store it inside the cylinder when not in use.</p>
<p>If you wish to add mass to the base, pause the print before the top layers get printed and carefully infill with sand.</p>
<p>Turntable and light acquired from Comgrow via Amazon.</p>
<p>UV light is dangerous. Please make sure all light leaks are sealed and do not look at lamp when on. If you print the cylinder out of glow material, you&apos;ll get an interesting lamp.</p>
<p>This design was done in Fusion 360.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/7f/1e/cb/ed/fb/cure_box-_assembled.jpg"></p>
                <p class="detail-caption"><strong>Completed unit is 150mm inner diameter and 200 mm tall (without light). The base has feet so that it can sit flat on a table and reduces the chance of rocking. Supports are not required to print the arches.</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/06/79/c2/38/7b/base_with_turntable.jpg"></p>
                <p class="detail-caption"><strong>A basic solar powered turntable fits into the recess on the base and rotates the model during the cure process. It is powered by the cure lamp. It is mildly friction fit into the recess.</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/0c/17/60/78/89/top_view.jpg"></p>
                <p class="detail-caption"><strong>The top has a recess to hold the lamp. It is also friction fit. Scale the whole print if your lamp doesn&apos;t fit, or use silicone to seal it. The dome of the lamp holder is vaulted and does not require support when printing as long as it is printed letter-side up.</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/88/f5/a7/1b/9e/lamp.jpg"></p>
                <p class="detail-caption"><strong>The cylinder has a friction fit to the top via a tapered flange. This completely seals in any UV light. The inner diameter of the cylinder is 150mm. It can be printed with 20% or higher infill.</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/36/50/c6/01/99/Lamp_mount.jpg"></p>
                <p class="detail-caption"><strong>This is the lid with the cylinder being printed in the background.</strong></p>
</body></html>

Resin Printing UV curing chamber

Simple printable UV cure light chamber for resin printing. 150mm inner diameter by 200mm tall, sized to fit common turntable and 60w-405nm LED light. Friction fit for turntable and light. Print top first and measure for LED light fit. Scale other parts to match in slicer. No overhangs over 45 degrees- does not require supports to print. PETG, ABS, or UV Stabilized PLA recommended.

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Hello,</p>
<p>Here&apos;s a basic yet usable design which will help within saving toothpaste when you need it the most, simple insert the toothpaste bottle inside of the main hole and force the excess paste out with the badge.</p>
<p>Using a peeling like action with the badge at an angle will force the excess paste into the direction you&apos;re peeling at. What&apos;s most suitable is using a wate badge for water based tasks, a little memento for Pokemon fans!</p>
<p>&#xA0;</p>
<p>Thanks for viewing,</p>
<p>K</p>
										</div>
										
                                    								</body></html>

Pokemon Toothpaste Sqeezer Badge

 Hello, Here's a basic yet usable design which will help within saving toothpaste when you need it the most, simple insert the toothpaste bottle inside of the main hole and force the excess paste out with the badge. Using a peeling like action with the badge at an angle will force the excess paste into the direction you're peeling at. What's most suitable is using a wate badge for water based tasks, a little memento for Pokemon fans! Thanks for viewing, K 

Arrayed Tube Vase # 1

<p>These drawers were designed to work with some of the Stack On 39 Drawer Storage Cabinet to provide divided drawers. I have tested the ones in included in this in my cabinet, but due to printer differences and manufacturing differences I don&apos;t know if they will work in all of them.</p>

<p>Currently I only have the smaller drawers completed, with two compartments or three. I intend on doing the larger drawers in the future, the basic drawer is designed just need to come up with how to divide them.</p>

<p>The handles come in two varieties, one for 6-32 hardware and one for M4 hardware</p>

<p>M4 bolt 8mm length or less with washer<br>
M4 nut press fit into M4 knob</p>

<p>6-32 screw 3/8 inch length or less with washer<br>
6-32 nut press fit into 632 knob</p>

<p>Just insert the bolt from the inside and screw the knob on.</p>


Stack On Replacement Drawers with Handles

These drawers were designed to work with some of the Stack On 39 Drawer Storage Cabinet to provide divided drawers. I have tested the ones in included in this in my cabinet, but due to printer differences and manufacturing differences I don't know if they will work in all of them.

Currently I only have the smaller drawers completed, with two compartments or three. I intend on doing the larger drawers in the future, the basic drawer is designed just need to come up with how to divide them.

The handles come in two varieties, one for 6-32 hardware and one for M4 hardware

M4 bolt 8mm length or less with washer
M4 nut press fit into M4 knob

6-32 screw 3/8 inch length or less with washer
6-32 nut press fit into 632 knob

Just insert the bolt from the inside and screw the knob on.


<html><head></head><body><div class="short-text text-auto-link  ">
                                            <div class="_Ejb">
<div id="tw-target">
<div id="tw-target-text-container" class="tw-ta-container tw-nfl">
<p>Have fun with Toadette explorer for 3d printing</p>
<p>For more pictures Check my instagram : <a href="/users/youb3d" target="_blank" rel="noopener noreferrer">@youb3d</a></p>
</div>
</div>
</div>
										</div>
										
                                    								</body></html>

Toadette explorer

 Have fun with Toadette explorer for 3d printing For more pictures Check my instagram : @youb3d 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><span style="color: #222222; font-size: 12px; font-family: &apos;Open Sans&apos;, sans-serif; background-color: #f9f9f9;">The First blade given to dean by his ansector Cain. &#xA0;Cain used this weapon to kill his brother Able, and was thusly marked. &#xA0;&#xA0; My first upload here, i do not normally share my work but someone asked for it so i split it in half and uploaded it.&#xA0; https://sketchfab.com/models/e577ed9f3bd7441fac41340f877b4cb5</span></p>
										</div>
										
                                    								</body></html>

The First Blade

 The First blade given to dean by his ansector Cain. Cain used this weapon to kill his brother Able, and was thusly marked. My first upload here, i do not normally share my work but someone asked for it so i split it in half and uploaded it. https://sketchfab.com/models/e577ed9f3bd7441fac41340f877b4cb5 

<html><head></head><body><div class="text-auto-link">
                                            <p>This is a flashlight mount for the Dyson V10 Animal Vac. For use when vacing under beds ect.</p>
										</div>
                                    								</body></html>

Flashlight mount for Dyson V10 Animal

 This is a flashlight mount for the Dyson V10 Animal Vac. For use when vacing under beds ect. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Polyhymnia was the muse of sacred religious music and poetry. Polyhymnia is sometimes thought of as the muse of thinkers and geometry because she herself is such a deep thinking person.<br> <br>Polyhymnia was a deep thinker. Compared to the other muses Polyhymnia was very serious and conservative. She is always shown wearing a long modest dress with a cloak like veil.<br> <br>She is credited with inventing the lyre. Many of the ancient Greek thinkers give credit and praise to Poyhymnia saying that it is she who helped inspire them to think great thinks.</p>
										</div>
										
                                    								</body></html>

Polyhymnia

 Polyhymnia was the muse of sacred religious music and poetry. Polyhymnia is sometimes thought of as the muse of thinkers and geometry because she herself is such a deep thinking person. Polyhymnia was a deep thinker. Compared to the other muses Polyhymnia was very serious and conservative. She is always shown wearing a long modest dress with a cloak like veil. She is credited with inventing the lyre. Many of the ancient Greek thinkers give credit and praise to Poyhymnia saying that it is she who helped inspire them to think great thinks. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Check out the related video here:<br>https://youtu.be/MSZQwbTkUoc<br><br>Make and customize your own Ork army with these parts. Be sure to share any of my 3D printed Orks that you decide to make on Instagram using #VidovicArts, I&apos;d love to see what you do!<br><br>More Variations to come!</p>
<p>Stay awesome everyone</p>
<p>Consider supporting me through Patreon:<br>https://www.patreon.com/VidovicArts</p>
<p>Follow me on Instagram:<br>https://www.instagram.com/VidovicArts/</p>
<p><br>PLEASE SUBSCRIBE AND SHARE IF YOU LIKED THIS BUILD TO SUPPORT MORE CONTENT!</p>
										</div>
										
                                    								</body></html>