Support free design competition
Spider "6 feet" to assemble. It: has a small storage compartment and is fully articulated. It requires no carrier and is connected by a set screw. The friction of the joint is ensured by printing tolerance. screws require no special break. This model is the low poly version for maximum lightness file. This "beast" is just as the vocation to be a toy (not below 4 years for children due to the presence of small pieces) a decorative object. instruction: pack 1 & 2 are the complete model. "Détail" are separed part. layer height : 0.08 (or 0.1) fill: 20 % shell thickness : 1.6 mm or 4 shells bottom / Top thickness : 1.2 mm temp: 205 speed while extruding : 40 mm/s The model was printed according to these settings. must be kept as to the mechanical element to keep good friction properties. With these parameters, no running screws or rectification with file have been necessary.