Name: Godzilla_1995_Full Body_H30cm
Brand: BRADE HU
Availability: InStock

Hot on the heels of introducing new technologies and machines to its lineup, Formlabs announces a valuable addition to its board.

Carl Bass, Former CEO of Autodesk, Joins Formlabs Board of Directors | All3DP

Unveiled at Beijing Design Week 2015, VULCAN holds the Guinness World Record as the world’s largest 3D printed architectural pavilion.

VULCAN: The World's Biggest 3D Printed Architectural Pavilion | All3DP

The Dremel DigiLab 3D40 Flex is an educationally-minded desktop 3D printer aimed at schools and universities. Read on as we review its specs.

Dremel 3D40 Flex 3D Printer: Review the Specs | All3DP

Looking for information on Autodesk? We‘ve accumulated the most important facts in this company profile.

Autodesk: Company Profile in 11 Facts | All3DP

Have you had a rough week? Need a hug? Now you can build a 3D printed robot for that - and it’s not very complicated.

Hugbot, A Soft Robot Who Gives Small Hugs | All3DP

After great success on Kickstarter, the E3D BigBox 3D printer is shipping to backers. Is it really the high-spec, no compromise machine we were promised?

E3D BigBox 3D Printer Review: Unbeatable (Budget) Performer | All3DP

The unique advantages of 3D printing are starting to be seen in construction and design. Check out these awe-inspiring 3D printed structures.

3D Printed Structures: Most Important Projects | All3DP

Electrick is a new technique developed by students from Carnegie Mellon University which can turn anything into a touch sensor.

Bringing 3D Printed Objects to Life With Spray Painted Touch Controls | All3DP

Swiss researchers at the École Polytechnique Fédérale de Lausanne have developed a way to 3D print microscopic structures with an optical fiber as thin as a human hair.

New Microfabrication Technique Using Fiber Optics | All3DP

This small, square-shaped, 3D printed lamp, with a sleek futuristic design, is powered by battery, charged wirelessly and will glow for 90 minutes on a single charge.

[Project] 3D Printed Wireless Lamp | All3DP

Developed with and for teachers, 3Doodler has unveiled learning packs for the classroom. Included in the packs are 12 3Doodler 3D pens, 1,200 strands of filament and lesson plans, which the  company claims can improve concentration among students.

3Doodler Debuts Educational Kits for Schools | All3DP

The Dremel DigiLab 3D20 is an desktop 3D printer aimed at schools and universities. Read why it's interesting for makers, educators, and beginners alike.

Dremel 3D20 3D Printer: Review the Specs | All3DP

Spiders

<p>The original model was a hot mess, and a reddit user requested someone fix it up, re-slice it into sections, and add assembly pins.</p>

<p><a href="https://www.reddit.com/r/3Dprinting/comments/77gk11/fixing_bad_stl_for_better_prints/" rel="external">https://www.reddit.com/r/3Dprinting/comments/77gk11/fixing_bad_stl_for_better_prints/</a></p>


Overwatch - Tracer

The original model was a hot mess, and a reddit user requested someone fix it up, re-slice it into sections, and add assembly pins.

https://www.reddit.com/r/3Dprinting/comments/77gk11/fixing_bad_stl_for_better_prints/


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>for the ender 3</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Ultimaker</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2BfKabj?tag=tv-auto-20" target="_blank">Ultimaker 3</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=zortrax+ZABS+&amp;tag=tv-auto-20" target="_blank">
                        zortrax ZABS                     </a>

                    Black
</body></html>

fan protection ender 3

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Slip Ring Mount for Fischertechnik Turntable<br>
Fischertechnik Schleifringhalter fuer Drehkranz</p>
<p>Klemmt einen Schleifring (Durchmesser 12.5 mm) passgenau in einen Fischertechnik Drehkranz.<br>
A clamp for slip ring ( 12.5 mm diameter), fits exactly into Fischertechnik turntable</p></div>
</body></html>

Slip Ring Mount for Fischertechnik Turntable

Slip Ring Mount for Fischertechnik Turntable
Fischertechnik Schleifringhalter fuer Drehkranz

Klemmt einen Schleifring (Durchmesser 12.5 mm) passgenau in einen Fischertechnik Drehkranz.
A clamp for slip ring ( 12.5 mm diameter), fits exactly into Fischertechnik turntable


<html><head></head><body><div class="text-auto-link">
                                            <p>https://i.pinimg.com/originals/20/bd/0a/20bd0a3505e9d787eedb022b4f6505e5.jpg</p>
<p>Mickey Mouse has joined the Vape Nation.</p>
<p>A dumb joke but One I needed to make.</p>
										</div>
                                    								</body></html>

H3H3 VAPE NATION Mickey Mouse gloves Gang Sign

 https://i.pinimg.com/originals/20/bd/0a/20bd0a3505e9d787eedb022b4f6505e5.jpg Mickey Mouse has joined the Vape Nation. A dumb joke but One I needed to make. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p><a href="/pages/support-scan-the-world" target="_blank" rel="noopener noreferrer"><img src="/uploads/tinymce-images/support.png" alt></a></p><p>This is one of a pair of sculptures by sculptor Ludovicus Willemssens, the other being &apos;Abundance&apos;. Both depict the allegories of wealth, personified as young children.</p>
<p>&#xA0;</p>
<p><span data-sheets-value="[null,2,&quot;This object is part of \&quot;Scan The World\&quot;. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe for the public to access for free. Scan the World is an open source, community effort, if you have interesting items around you and would like to contribute, email stw@myminifactory.com to find out how you can help.&quot;]" data-sheets-userformat="[null,null,2819,[null,0],[null,2,16777215],null,null,null,null,null,null,3,0,null,[null,2,2236962]]">This object is part of &quot;Scan The World&quot;. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe for the public to access for free. Scan the World is an open source, community effort, if you have interesting items around you and would like to contribute, email <a href="mailto:stw@myminifactory.com" target="_blank">stw@myminifactory.com</a> to find out how you can help.</span></p>
										</div>
										
                                    								</body></html>

La Prudence

 This is one of a pair of sculptures by sculptor Ludovicus Willemssens, the other being 'Abundance'. Both depict the allegories of wealth, personified as young children. This object is part of "Scan The World". Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe for the public to access for free. Scan the World is an open source, community effort, if you have interesting items around you and would like to contribute, email stw@myminifactory.com to find out how you can help. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just finished this version of Among Us</p></div>
</body></html>

Among Us Character

<html><head></head><body><div class="text-auto-link">
                                            <p>Bumper for Pro-line &apos;70s Rock Van&#x200B; Clear Body</p>
<p>&#xA0;</p>
<p>To glue this item to other item or lexan body, best use shoe goo glue. Its strong elastic and safe for lexan and paint.</p>
<p>&#xA0;</p>
<p>Those parts are suitable mostly for resin printes</p>
										</div>
                                    								</body></html>

Bumper for Pro-line '70s Rock Van​ Clear Body

 Bumper for Pro-line '70s Rock Van​ Clear Body To glue this item to other item or lexan body, best use shoe goo glue. Its strong elastic and safe for lexan and paint. Those parts are suitable mostly for resin printes 

<p>I found on eBay one of those rotary encoders used in commercial CNC pendants (search for &apos;cnc hand wheel&apos; or &apos;ZSS600-001-100B-5L&apos;) and came to the idea to create my own one.</p>

<p>I am using bCNC to control my mini CNC. In bCNC you use the arrow and page-up/page-down keys to control the three axis. Take this and the fact that you can program an Arduino Pro Micro to act as an keyboard and the electronic side of this project is basically done.</p>

<p>What was left to do was to design a case. I was constrained by the size of the rotary switch and the USB breakout board otherwise it might have gotten a bit smaller.</p>

<p>See it in action:<br>
<iframe width="593" height="370" src="//www.youtube.com/embed/PTTVuVUZYM8" frameborder="0" allowfullscreen></iframe></p>

<p>I have included the OpenSCAD file which is somewhat parametric</p>

<h1>BOM</h1>

<ul>
<li>Rotary encoder

<ul>
<li>Search for &apos;cnc hand wheel&apos; or &apos;ZSS600-001-100B-5L&apos;</li>
<li>If it has the terminals A, B, A&#x305;, B&#x305;, Vcc and 0V and is specified to work with 5V, it should be fine</li>
</ul></li>
<li>Rotary switch with 3 positions (see picture, others might also fit)</li>
<li>USB Type-B break-out board</li>
<li>Micro-USB cable</li>
<li>6 socket head screws M3x12</li>
</ul>

<h1>Arduino Pin-out</h1>

<ul>
<li>RAW =&gt; Terminal Vcc of rotary encoder</li>
<li>GND =&gt; Terminal 0V of rotary encoder</li>
<li>2 =&gt; Terminal A of rotary encoder</li>
<li>3 =&gt; Terminal B of rotary encoder</li>
<li>GND =&gt; Common Pin of rotary switch</li>
<li>4 =&gt; Pin of rotary switch for X</li>
<li>5 =&gt; Pin of rotary switch for Y</li>
<li>6 =&gt; Pin of rotary switch for Z</li>
</ul>

<p>(The internal pull-up resistors of the Arduino are used)</p>

<h1>Assembly</h1>

<ol>
<li>Glue the top plate to upper part</li>
<li>Cut a micro USB cable and solder it to the USB break-out board</li>
<li>Glue the break-out board and the cable with hot glue to the lower part</li>
<li>Solder the cables to the Arduino Pro Micro</li>
<li>Plug the Arduino Pro Micro into the USB cable</li>
<li>Screw the lower and upper part together (the screws should thread themselves), take care to not pinch any cable</li>
<li>Upload the sketch to the Arduino Pro Micro</li>
<li>Done</li>
</ol>

<h3>Troubleshooting</h3>

<p>If your computer does not recognize the Arduino when connected via the break-out board switch the cables for D+ and D-.</p>


bCNC Pendant

I found on eBay one of those rotary encoders used in commercial CNC pendants (search for 'cnc hand wheel' or 'ZSS600-001-100B-5L') and came to the idea to create my own one.

I am using bCNC to control my mini CNC. In bCNC you use the arrow and page-up/page-down keys to control the three axis. Take this and the fact that you can program an Arduino Pro Micro to act as an keyboard and the electronic side of this project is basically done.

What was left to do was to design a case. I was constrained by the size of the rotary switch and the USB breakout board otherwise it might have gotten a bit smaller.

See it in action:


I have included the OpenSCAD file which is somewhat parametric

BOM


Rotary encoder


Search for 'cnc hand wheel' or 'ZSS600-001-100B-5L'
If it has the terminals A, B, A̅, B̅, Vcc and 0V and is specified to work with 5V, it should be fine

Rotary switch with 3 positions (see picture, others might also fit)
USB Type-B break-out board
Micro-USB cable
6 socket head screws M3x12


Arduino Pin-out


RAW => Terminal Vcc of rotary encoder
GND => Terminal 0V of rotary encoder
2 => Terminal A of rotary encoder
3 => Terminal B of rotary encoder
GND => Common Pin of rotary switch
4 => Pin of rotary switch for X
5 => Pin of rotary switch for Y
6 => Pin of rotary switch for Z


(The internal pull-up resistors of the Arduino are used)

Assembly


Glue the top plate to upper part
Cut a micro USB cable and solder it to the USB break-out board
Glue the break-out board and the cable with hot glue to the lower part
Solder the cables to the Arduino Pro Micro
Plug the Arduino Pro Micro into the USB cable
Screw the lower and upper part together (the screws should thread themselves), take care to not pinch any cable
Upload the sketch to the Arduino Pro Micro
Done


Troubleshooting

If your computer does not recognize the Arduino when connected via the break-out board switch the cables for D+ and D-.


<html><head></head><body><div class="text-auto-link">
                                            <p>This is a replica of an RPG-7 Grenade to be used for a film seen.</p>
<p>Is has a hollow core to allow a rocket motor to be mounted in the base to propel it.<br>i would also recommend using invisible fishing line and o screws as a guide wire to support the model.</p>
										</div>
                                    								</body></html>

RPG-7 Rocket Propelled Grenade

 This is a replica of an RPG-7 Grenade to be used for a film seen. Is has a hollow core to allow a rocket motor to be mounted in the base to propel it.i would also recommend using invisible fishing line and o screws as a guide wire to support the model. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>As I didn&apos;t buy the the URUAV metal case I had to design my own.<br>
The bottom is remix and the top a new design. Works really great!<br>
The tolerances of the case a quite small. Maybe you have to file the inner surfaces a bit.<br>
Also you need to remove the small plastic ring in on of the SMA connectors of the Rapidfire<br>
Use M2 screws to hold the case to the bottom. I pre cut the M2 after printing.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30 %</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Different+PLA&amp;tag=tv-auto-20" target="_blank">
                        Different PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print the case upside down.</p>
<p>Bottom doesn&apos;t need support.</p></div>
</body></html>

URUAV V3 Plus for DJI HD Googles - Bottom and Case for Rapidfire

As I didn't buy the the URUAV metal case I had to design my own.
The bottom is remix and the top a new design. Works really great!
The tolerances of the case a quite small. Maybe you have to file the inner surfaces a bit.
Also you need to remove the small plastic ring in on of the SMA connectors of the Rapidfire
Use M2 screws to hold the case to the bottom. I pre cut the M2 after printing.


<p>A simple, strong towel hook perfect for the bath or shower, especially for places too narrow for a towel rod.</p>


Towel Hook

A simple, strong towel hook perfect for the bath or shower, especially for places too narrow for a towel rod.


<html><head></head><body><div class="text-auto-link">
                                            <p>Create by Brade Hu</p>
<p>https://www.facebook.com/Mr.BradeHu/</p>
										</div>
                                    								</body></html>