Conventional dental imaging techniques are becoming obsolete thanks to 3D scanning. Discover what a 3D dental scan is, how it's done, and what it's useful for!

Dental 3D Scanning – Next Level Imaging in Dentistry | All3DP

3D Slash adds two new features that allow you to create 3D text and 3D logos in a few seconds: Just type the text or import an image file - 3D Slash does the rest.

3D logos and text made easy

A designer has developed a 3D printed robot that can auto-adjust its height to maneuver a wide range of spaces.

This 3D Printed Robot Can Crawl Underneath Doors | All3DP

Even the best FDM 3D printer produces layer lines. Check our guide to smoothing 3D prints to learn three methods of PLA smoothing for a professional finish.

PLA Smoothing: Beginner's Guide to Smoothing 3D Prints | All3DP

Professional 3D printing service Shapeways has alerted users about a possible data breach, and requests that customers reset their passwords.

Shapeways Alerts Users about Possible Data Breach | All3DP

The 100th anniversary of Albert Einstein's Theory of Relativity is marked with a 3D printed book called "Genius: 100 Visions of the Future".

3D Printed Book to Honor Genius of Albert Einstein | All3DP

3D printing in multiple colors? Yes but only when you have the right hardware. And most of it is not in the stores, yet.

Can I print in multiple colors? | All3DP

The FieldLab is solar-powered and compact, making it suitable for conflict-ridden and remote areas requiring medical assistance.

3D Printed Solar-Powered FieldLab Makes Medical Diagnosis More Accessible and Affordable | All3DP

Looking to do some CNC milling? Chances are you need CAM. Luckily, there's Fusion 360 CAM. Follow along as we show you how to get started!

Fusion 360 CAM: A Beginner's Guide to Fusion 360 for CNC | All3DP

Researchers at Perdue University have outlined a new software solution to the limitations of underpowered smartphone-driven VR.

Furion Software Could Bring High Quality VR to Your Smartphone | All3DP

Domestic Data Streamers and Spotify collaborate with BCN3D to create The Timekeeper 3D printed marble machine for Sonar Music Festival. 

BCN3D Creates 3D Printed Marble Machine For Sonar Music Festival | All3DP

Australian scientists are using a special bio-ink made from stem cells to 3D print patient-specific brain tissue.

Scientists Are Bioprinting Brain-Like Tissue From Stem Cells | All3DP

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Need to run a cord or cable through your desk, cabinet or table? <br> Chop a hole in it using a 1 1/2&quot; hole saw, slide the cable through, then insert both halves of the hole-plug in so hide any ragged edges. <br> Perfect for Ikea furniture that is hollow inside, the small flange helps conceal the edge of the hole plus any scratches caused by the hole saw.</p>
										</div>
										
                                    								</body></html>

Cord Holding Desk Plug (fits 1.5  / 38.5mm holes)

 Need to run a cord or cable through your desk, cabinet or table? Chop a hole in it using a 1 1/2" hole saw, slide the cable through, then insert both halves of the hole-plug in so hide any ragged edges. Perfect for Ikea furniture that is hollow inside, the small flange helps conceal the edge of the hole plus any scratches caused by the hole saw. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is the Ape Board. It&apos;s a prototype finger training tool aimed at rock climbers. Attach some cord to the board and you can take it anywhere. Its great for warming up your fingers before you crush your projects and can be used for training when you&apos;re on the move or if you have limited space. It doesn&apos;t take up much room in your bag and weighs in at 400g (including the cord) so you won&apos;t even notice its there.</p>
<p>You can download the two files that make up the board and 3D print your own Ape Board - Test it, let me know how you get on and look out for version 2 in the near future!</p>
<p><iframe src="https://www.youtube.com/embed/KYJnZMXSb9w" width="560" height="315" frameborder="0" allowfullscreen="allowfullscreen"></iframe></p>
<p>The board is 300mm long which is too large for the majority of desktop 3D printers so I&apos;ve split it into left and right parts. Print them with the back of the board on the print bed, as they are in the STL files, so that the layering doesnt weaken the board. I&apos;ve used PLA and had good results, I wouldn&apos;t recommend printing this in ABS as it is not quite as rigid and test parts have flexed too much.</p>
<p>The board has held up really well with a month of regular use so I recommend the following print settings for use with PLA:</p>
<p>Layer Height: 0.2mm</p>
<p>4 Perimeter Shells</p>
<p>40% Rectilinear Infill</p>
<p>60mm/s Print Speed</p>
<p>Print with a Raft and Support. When printed without a raft the print tended to warp at the corners.</p>
<p>The Left part will take approximately 10 hours to print and use about 150g of filament &amp; The Right part will take approximately 19 hours to print and use about 300g of filament.</p>
<p>&#xA0;</p>
<p>Once you&apos;ve printed the parts you&apos;ll need the following:</p>
<p>4 60mm lengths of 5mm diameter rod. I used carbon fiber rod because the shop was out of 5mm steel rod and it&apos;s worked just as well.<br>Superglue - Or any Cyanoacrylate.<br>Plastic Weld - Any plastic adhesive with Dichloromethane (Methylene Chloride) will do &amp; a small paint brush to apply.<br>About 1.4 meters of 6mm Static Cord.<br>Be very careful with the Dichloromethane - It&apos;s highly toxic and you should always read the label before using.</p>
<p>Once you have threaded the cord through the long hole in the Ape Board, tie a loop in the end <a href="https://youtu.be/C38r-SQc5uQ">using this knot</a>&#xA0;(ignore the rock rings, they&apos;re heavy as hell).</p>
<p>Finally.......Wait. Sorry I know its the last thing you want to do now but <a href="http://my3dmatter.com/what-is-the-influence-of-color-printing-speed-extrusion-temperature-and-ageing-on-my-3d-prints/">a very useful study</a>&#xA0;has shown that the strength of PLA parts will increase steadily for roughly 72 hours (3 days) after printing. It&apos;s better to wait and use the board once the filament has achieved its optimal strength, after all you will be hanging from it.</p>
<p>You may also want to lightly sand down the texture in the pockets. I have found this depends entirely on the person, some think it&apos;s great as it is, others prefer to take the bite out of it a little.</p>
<p>&#xA0;</p>
<p>Please send me some pictures of your Ape Board in use and look out for Version 2.0 in the hopefully not too distant future.&#xA0;</p>
										</div>
										
                                    								</body></html>

Ape Board - Rock Climbing Training Board

 This is the Ape Board. It's a prototype finger training tool aimed at rock climbers. Attach some cord to the board and you can take it anywhere. Its great for warming up your fingers before you crush your projects and can be used for training when you're on the move or if you have limited space. It doesn't take up much room in your bag and weighs in at 400g (including the cord) so you won't even notice its there. You can download the two files that make up the board and 3D print your own Ape Board - Test it, let me know how you get on and look out for version 2 in the near future! The board is 300mm long which is too large for the majority of desktop 3D printers so I've split it into left and right parts. Print them with the back of the board on the print bed, as they are in the STL files, so that the layering doesnt weaken the board. I've used PLA and had good results, I wouldn't recommend printing this in ABS as it is not quite as rigid and test parts have flexed too much. The board has held up really well with a month of regular use so I recommend the following print settings for use with PLA: Layer Height: 0.2mm 4 Perimeter Shells 40% Rectilinear Infill 60mm/s Print Speed Print with a Raft and Support. When printed without a raft the print tended to warp at the corners. The Left part will take approximately 10 hours to print and use about 150g of filament & The Right part will take approximately 19 hours to print and use about 300g of filament. Once you've printed the parts you'll need the following: 4 60mm lengths of 5mm diameter rod. I used carbon fiber rod because the shop was out of 5mm steel rod and it's worked just as well.Superglue - Or any Cyanoacrylate.Plastic Weld - Any plastic adhesive with Dichloromethane (Methylene Chloride) will do & a small paint brush to apply.About 1.4 meters of 6mm Static Cord.Be very careful with the Dichloromethane - It's highly toxic and you should always read the label before using. Once you have threaded the cord through the long hole in the Ape Board, tie a loop in the end using this knot (ignore the rock rings, they're heavy as hell). Finally.......Wait. Sorry I know its the last thing you want to do now but a very useful study has shown that the strength of PLA parts will increase steadily for roughly 72 hours (3 days) after printing. It's better to wait and use the board once the filament has achieved its optimal strength, after all you will be hanging from it. You may also want to lightly sand down the texture in the pockets. I have found this depends entirely on the person, some think it's great as it is, others prefer to take the bite out of it a little. Please send me some pictures of your Ape Board in use and look out for Version 2.0 in the hopefully not too distant future. 

The zip file contains all the capital letters written with the ARIAL font individually saved each as a .stl file plus a .stl file containing the entire alphabet<br>
<br>
The Alphabet.stl file containing the entire alphabet was created and printed with an Ender3, it can happen that, for the Delta printers, the image is too big, in this case the dimensions can be scaled.<br>
<br>
Have fun and good 3D printing!!!!

ARIAL font uppercase 3D letters STL file

The zip file contains all the capital letters written with the ARIAL font individually saved each as a .stl file plus a .stl file containing the entire alphabet

The Alphabet.stl file containing the entire alphabet was created and printed with an Ender3, it can happen that, for the Delta printers, the image is too big, in this case the dimensions can be scaled.

Have fun and good 3D printing!!!!

<p>I broke this plastic hook right after unpacking the tool the first time. The visual on the packaging suggested to rotate the parts ultimately breaking the plastic hook. Here is a replacement.</p>


Topeak SuperSteel Tire Lever - Plastic Hook

I broke this plastic hook right after unpacking the tool the first time. The visual on the packaging suggested to rotate the parts ultimately breaking the plastic hook. Here is a replacement.


Hammer 3D model, more tools here:<br>
<a href="https://bit.ly/38LVkZf" target="_blank">https://bit.ly/38LVkZf</a><br>
<br>
<br>
&#xA0;

Hammer

Hammer 3D model, more tools here:
https://bit.ly/38LVkZf


 

<html><head></head><body><div class="text-auto-link">
                                            <p>Angle Joint Connector(M8)</p>
										</div>
                                    								</body></html>

Angle Joint

<html><head></head><body><div class="text-auto-link">
                                            <p>This object was made in Tinkercad. https://www.tinkercad.com/things/dK3qbjAnJ2S</p>
										</div>
                                    								</body></html>

Dazzling Inari

 This object was made in Tinkercad. https://www.tinkercad.com/things/dK3qbjAnJ2S 

<html><head></head><body><div class="text-auto-link">
                                            <p>Basket to install on the wall</p>
<p>&#xA0;</p>
										</div>
                                    								</body></html>

Wall Basket - 벽바구니

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>So you think to yourself, sure, those facade tiles are cool, but what about all the Towne tiles I have, what about all my Dungeon Stone?&#xA0; Well, we have an answer for you, Eaves, with and without corbels.&#xA0; This lets you use your existing 2 inch tall tiles the same way as the facade tiles for building awesome looking structures!<br><br>Beyond that, this release also includes the full set of stone-brick gables to make sure you can do any of the sizes with the gables while still fitting the stone-brick texture.</p>
<p>For instructions on how to get started with OpenForge, we have a set of&#xA0;tutorials. Want to sell OpenForge prints? Want to use OpenForge designs in your product, check out the&#xA0;license&#xA0;FAQ.</p>
<p>OpenForge is now a&#xA0;patron&#xA0;supported project. I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail. Please, support me, and I&#x2019;ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:</p>
<p><a href="https://drive.google.com/file/d/1Amory3eH7ubFf551PzVXWbQ_nFeCyyr5/view?usp=sharing">Tile Tree</a><br><a href="http://masterwork-tools.com/">Website</a><br><a href="https://reddit.com/r/OpenForge">Forums</a> (Mostly we use facebook now)<br><a href="https://twitter.com/MasterworkTools">Twitter</a><br><a href="https://facebook.com/masterworktools/">Facebook</a></p>
<p><strong>Other Related Tiles</strong></p>
<p>You can find other tiles that are related in the <a href="https://www.myminifactory.com/users/devonjones/collection/city-streets">City Streets</a> collection, as well as the <a href="https://www.myminifactory.com/users/devonjones/collection/city-streets">City Streets</a> collections on Thingiverse.</p>
										</div>
										
                                    								</body></html>

Eaves, oh, and Stone-Brick Gables

 So you think to yourself, sure, those facade tiles are cool, but what about all the Towne tiles I have, what about all my Dungeon Stone? Well, we have an answer for you, Eaves, with and without corbels. This lets you use your existing 2 inch tall tiles the same way as the facade tiles for building awesome looking structures!Beyond that, this release also includes the full set of stone-brick gables to make sure you can do any of the sizes with the gables while still fitting the stone-brick texture. For instructions on how to get started with OpenForge, we have a set of tutorials. Want to sell OpenForge prints? Want to use OpenForge designs in your product, check out the license FAQ. OpenForge is now a patron supported project. I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail. Please, support me, and I’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our: Tile TreeWebsiteForums (Mostly we use facebook now)TwitterFacebook Other Related Tiles You can find other tiles that are related in the City Streets collection, as well as the City Streets collections on Thingiverse. 

<html><head></head><body><div class="text-auto-link">
                                            <p>Its for a full sized violin.</p>
										</div>
                                    								</body></html>

Entree by Aiden(Violin tuning peg)

Lefaucheux M1858 3rd Type 12mm 6Shoot (3D Print Kit Toy Gun)

<html><head></head><body><div class="text-auto-link">
                                            <p>beautiful king crab ring, with great detail, easy to print on any type of 3d printer. fun and stylish.</p>
										</div>
                                    								</body></html>

KING CRAB RING

 beautiful king crab ring, with great detail, easy to print on any type of 3d printer. fun and stylish. 

<html><head></head><body><div class="text-auto-link">
                                            <p>A simple pikachu cookie cutter</p>
										</div>
                                    								</body></html>

Thingscanner

Pikachu cookie cutter

FREE

Some things you might like

Cord Holding Desk Plug (fits 1.5 / 38.5mm holes)