Designer Eliza Wrobel created a Ferris wheel bookshelf, with shelves instead of passengers, putting interior design in strict rotation.

Jazz Up your Home with a Ferris Wheel Bookshelf | All3DP

Michelin's futuristic airless and environmentally friendly wheel design is one of TIME Magazine's chosen 25 Best Inventions of 2017. 

Michelin's 3D Printed Concept Tire Makes TIME Magazine's 25 Best Inventions of 2017 | All3DP

The go-to budget printer of the day reimagined: Creality's Ender 3 V2 doesn't reinvent the wheel, but it does jazz it up.

Creality Ender 3 V2 Review: Best 3D Printer Under $300 | All3DP

Product Designer Marco Mattia Cristofori from BigRep turned to the custom wheel rim for a development challenge, creating a prototype virtually indistinguishable from the real thing.

BigRep Prototypes Big with a 3D Printed Wheel Rim | All3DP

Michelin unveils the 3D printed tire of the future which doesn't puncture and is environmentally friendly at the MovinOn conference.

Michelin Develops a Futuristic, Airless Wheel with 3D Printing | All3DP

This dedicated Zortrax user designed and printed his own simulated racing hardware, giving him the taste of a Formula One race.

3D Printed Formula One Wheel is Perfect for Racing Sims | All3DP

Want to make your video gaming experience even more realistic? New York-based designer Brent Scott has created a 3D printable mini steering wheel that you can mount onto your Xbox One or PlayStation 4 controller. 

[Project] 3D Print a Mini Steering Wheel for Your Xbox One or PS4 Controller | All3DP

The Ruiz Brothers of Adafruit are at it again with another fascinating 3D printing project: the 3D printed Crickit Paddle Wheel Boat. This water rover even has an underwater camera mount, so you can capture footage at your end of the summer pool party!

[Project] Have a Pool Party with this 3D Printed Cricket Paddle Wheel Boat | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a single wheel finger fidget board that you can play with, to some degree, like finger skate boards. It fits together with one snap connector and a friction connection (see photos). This design started out as an experiment in connectors, but it seemed to make an interesting toy. I modified the original design to make it more finger friendly. Since it doesn&apos;t incorporate steel bearings, it doesn&apos;t roll as smooth as if it did. It is kind of amusing to play with. You can also use it as a mini roller massager if you have tennis elbow. :) </p>
<p>I have included the three pieces as separate object files, and one file combining the three pieces, if you want to print them that way. Be sure to print the axles in their normal orientation for added strength. Print the wheel/tire laying on its side.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PETG&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PETG                    </a>

                    Black
</body></html>

One Wheel Freestyle Finger Board - Fidget Toy

This is a single wheel finger fidget board that you can play with, to some degree, like finger skate boards. It fits together with one snap connector and a friction connection (see photos). This design started out as an experiment in connectors, but it seemed to make an interesting toy. I modified the original design to make it more finger friendly. Since it doesn't incorporate steel bearings, it doesn't roll as smooth as if it did. It is kind of amusing to play with. You can also use it as a mini roller massager if you have tennis elbow. :) 

I have included the three pieces as separate object files, and one file combining the three pieces, if you want to print them that way. Be sure to print the axles in their normal orientation for added strength. Print the wheel/tire laying on its side.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A pack of bolt heads, spikes and exhaust pipes to convert any random vehicle to orc vehicle !!! All files can be printed without supports and can be easilly printed even with fdm printers.</p>
<p>IMPORTANT:<br>
Print them at 0.08 layer height or bellow for better resolution.</p>
<p>Please consider donating a coffee to stay up later at night and make more cool designs!!!<br><a rel="nofollow" href="https://paypal.me/johnboubalis?locale.x=el_GR">https://paypal.me/johnboubalis?locale.x=el_GR</a></p>
<p>or &apos;tip designer&apos;</p>
<p>Please contact me if you find difficulties that need to be solved or have thoughts for improvement.</p></div>
</body></html>

orc vehicle conversion kit 2 R

A pack of bolt heads, spikes and exhaust pipes to convert any random vehicle to orc vehicle !!! All files can be printed without supports and can be easilly printed even with fdm printers.

IMPORTANT:
Print them at 0.08 layer height or bellow for better resolution.

Please consider donating a coffee to stay up later at night and make more cool designs!!!
https://paypal.me/johnboubalis?locale.x=el_GR

or 'tip designer'

Please contact me if you find difficulties that need to be solved or have thoughts for improvement.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a remix of Al El&apos;s caps (<a rel="nofollow" href="/thing:3096177">https://www.thingiverse.com/thing:3096177</a>) for lazy people like me. Stop at 17.2 mm and change filament.</p></div>
</body></html>

Tesla model 3 lug nut caps for aero wheels

This is a remix of Al El's caps (https://www.thingiverse.com/thing:3096177) for lazy people like me. Stop at 17.2 mm and change filament.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A center hub cap cover for wheels 45mm hole</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Clone</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Unknown+PLA&amp;tag=tv-auto-20" target="_blank">
                        Unknown PLA                    </a>

                    Orange
</body></html>

Center Hub Cap for wheel 

A center hub cap cover for wheels 45mm hole

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is my Quick Release Adapter for the Logitech G27 Wheel. You can use the 50mm Adapter for the Original Wheel and the 70mm Adapter for Custom Wheels. You just need a 40mm clamp from the Bike Shop to fix it. In the middle is a hole for your USB Cable, if you need someone.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Logitech G27 Quick Release Adapter 50 & 70mm Wheels

This is my Quick Release Adapter for the Logitech G27 Wheel. You can use the 50mm Adapter for the Original Wheel and the 70mm Adapter for Custom Wheels. You just need a 40mm clamp from the Bike Shop to fix it. In the middle is a hole for your USB Cable, if you need someone.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>An alignment disk wheel for setting up your suspension geometry on a 1/10 on-road r/c car.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Homebrew</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=3D+Solutech+PLA&amp;tag=tv-auto-20" target="_blank">
                        3D Solutech PLA                    </a>

                    Blue
</body></html>

Alignment Disk Wheel for 1/10 On-Road R/C Cars

An alignment disk wheel for setting up your suspension geometry on a 1/10 on-road r/c car.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Suspension Pipes.<br>
Use multiple or one big spring ( pen springs work fine)<br>
The spring should be longer than the holder, but shorter than the shell... If that makes any sense</p>
<p>Neither Versions have been tested, I&apos;m planning on doing that in a week or two..<br>
(Untested) Please provide feedback if printed</p>
<p>Please let me see your make!</p></div>
<h3 class="thing-component-header custom important">IMPORTANT</h3>
<p class="detail-title"><strong>(UNTESTED)</strong></p>
                <div><p>No Print Settings, Or help making it, Sorry! But please provide feedback, It is a full WIP so it may be dodgy, Neither Versions have been tested but in theory  they work.... NEEDS SPRING LONGER THAN HOLDER</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/a7/32/27/58/55/Screen_Shot_2020-10-31_at_3.36.28_PM.png"></p>
                <p class="detail-caption"><strong>A spring like this or a pen spring should be fine</strong></p>
</body></html>

Suspension Poles

Suspension Pipes.
Use multiple or one big spring ( pen springs work fine)
The spring should be longer than the holder, but shorter than the shell... If that makes any sense


Neither Versions have been tested, I'm planning on doing that in a week or two..
(Untested) Please provide feedback if printed


Please let me see your make!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Playing race games is fun but, playing it on a racewheel is even more fun! For example: the Logitech g920 is a great beginners wheel! BUT, there is a downside! If you are a person that plays along friends or have the need to look around you car, you&apos;re missing 2 major (THINGS), and that&apos;s a headphonejack and a thumbstick. so you have to have youre controller right next to you.</p>
<p>that&apos;s why I came up with this solution;<br>
a simple but practical solution!</p>
<p>Simply attach the mount via a M8 bold/nut to your Wheel stand end tadaa!<br>
Ok not every one have a wheel stand, but hey feel free to ad something that you can clamp on you desk or so. the tricky part is the gamepad holder anyway.</p>
<p>You have to trim of all the supports (don&apos;t forget the support between the small tabs that holds you controller in place) and make sure your headphone/charge cable fit inside the cable management tabs! I make those a bit snug on purpose, so everyone can customize it for their own cable thickness. But I included an STL file without the cable management!</p>
<p>I hope that I made some one happy with this.</p>
<p>Good luck and happy printing!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Jupiter+PLA&amp;tag=tv-auto-20" target="_blank">
                        Jupiter PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Cura:</p>
<p>Layer Height: 0.2mm<br>
Wall Line Count 5<br>
top/bottom layer 4</p>
<p>Infill Densety 50%<br>
Infill Line Distance 2.4mm<br>
Infil Pattern Cubic</p></div>
</body></html>

XBOX ONE Gamepad Mount

Playing race games is fun but, playing it on a racewheel is even more fun! For example: the Logitech g920 is a great beginners wheel! BUT, there is a downside! If you are a person that plays along friends or have the need to look around you car, you're missing 2 major (THINGS), and that's a headphonejack and a thumbstick. so you have to have youre controller right next to you.

that's why I came up with this solution;
a simple but practical solution!

Simply attach the mount via a M8 bold/nut to your Wheel stand end tadaa!  
Ok not every one have a wheel stand, but hey feel free to ad something that you can clamp on you desk or so. the tricky part is the gamepad holder anyway.

You have to trim of all the supports (don't forget the support between the small tabs that holds you controller in place) and make sure your headphone/charge cable fit inside the cable management tabs! I make those a bit snug on purpose, so everyone can customize it for their own cable thickness. But I included an STL file without the cable management!

I hope that I made some one happy with this.


Good luck and happy printing!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Hub adapter for any logitech wheels to mount 70mm PCD wheels. It is specifically designed for a g25 wheel to reuse the button PCB with some modifications to it as seen on picture.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>MakerBot</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://bit.ly/2FF1gBN" target="_blank">MakerBot Replicator</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Orange
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>2mm wall for strength and hexagons filling</p></div>
</body></html>

G25 Hub Adapter for 6 Holes 90mm PCD

Just my design of a Hub adapter for any logitech wheels to mount 70mm PCD wheels. It is specifically designed for a g25 wheel to reuse the button PCB with some modifications to it as seen on picture.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a replacement GE dishwasher lower rack wheel axle, patterned after the manufacture&apos;s new style of OEM part, but reinforced and enhanced for a better fit and for a stronger 3D print. Works on front or rear wheels. If you want to purchase this part commercially, it is not sold separately; you are required to buy a full set of 8 wheels and axles, costing $10-to-$25 (GE Dishwasher Rack Wheel Axle Replacement, part #WD35X21041). Weighing in at 4 grams, this design is an inexpensive (~$0.10) and quick way to get a replacement axle -- it prints in less than an hour. The manufacturer&apos;s original design that is used in my dishwasher is not very sturdy. Consequently, it fails, thus explaining why replacements are sold at many internet retailers.</p>
<p>For a stronger print that better utilizes the layers and filament flow, I recommend printing this design upright, which will require some supports. After printing, I cleaned up the support material and lightly sanded the shaft that goes through the wheel so that it is smooth.</p>
<p>NOTE: I don&apos;t know how the PETG will react to the water, detergent, enzymes and heat found in a dishwasher. I will update this description after washing a few batches. </p>
<p><strong>Update</strong>:   After two weeks of use, the PETG clips are holding up. I have replaced the 4 axles on the right side of the drying rack and the wheels roll better and are less wobbly. The drying rack rolls in and out better than before.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PETG&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PETG                    </a>

                    Black
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<div><p>Two of the lower rack wheel axles broke in my dishwasher. Rather than buying a full set of replacements for a machine that is on its last leg, I decided to design a replacement. Afetr 3 revisions, I think I have a working design.</p></div>
</body></html>

GE Dishwasher Rack Wheel Axle Replacement (WD35X21041)

This is a replacement GE dishwasher lower rack wheel axle, patterned after the manufacture's new style of OEM part, but reinforced and enhanced for a better fit and for a stronger 3D print. Works on front or rear wheels. If you want to purchase this part commercially, it is not sold separately; you are required to buy a full set of 8 wheels and axles, costing $10-to-$25 (GE Dishwasher Rack Wheel Axle Replacement, part #WD35X21041). Weighing in at 4 grams, this design is an inexpensive (~$0.10) and quick way to get a replacement axle -- it prints in less than an hour. The manufacturer's original design that is used in my dishwasher is not very sturdy. Consequently, it fails, thus explaining why replacements are sold at many internet retailers.

For a stronger print that better utilizes the layers and filament flow, I recommend printing this design upright, which will require some supports. After printing, I cleaned up the support material and lightly sanded the shaft that goes through the wheel so that it is smooth.

NOTE: I don't know how the PETG will react to the water, detergent, enzymes and heat found in a dishwasher. I will update this description after washing a few batches. 

**Update**:   After two weeks of use, the PETG clips are holding up. I have replaced the 4 axles on the right side of the drying rack and the wheels roll better and are less wobbly. The drying rack rolls in and out better than before.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>An All-in-1 design of Burning Wheel Dice. Sides are: 1x Traitor, 1x Exploding, 2x Black, 1x Grey, 1x White</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>MakerBot</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://bit.ly/2DNsRkI" target="_blank">MakerBot Replicator+</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><blockquote>
<p>30% for weight</p>
</blockquote></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Blue
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Makerbot filament and printed it with more resolution than it probably needed, but it works well. These are 16mm dice, but they could be scaled to fit whatever size you want them.</p></div>
</body></html>

Burning Wheel Dice 16mm All-in-1

An All-in-1 design of Burning Wheel Dice. Sides are: 1x Traitor, 1x Exploding, 2x Black, 1x Grey, 1x White

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>axel servo mount for HPI wheely king 4x4</p>
<p>for standart servo</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>FlyingBear 4s</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ABS+ABS&amp;tag=tv-auto-20" target="_blank">
                        ABS ABS                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used ABS no name, w\supports 25% (w\o walls)<br>
Print Speed of 50mm/s. </p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/fe/fe/9a/63/3b/WhatsApp_Image_2020-10-22_at_02.32.15.jpeg"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/10/c4/46/c6/df/WhatsApp_Image_2020-10-22_at_02.32.15_1.jpeg"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b0/31/92/95/85/WhatsApp_Image_2020-10-22_at_02.32.15_2.jpeg"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b6/ec/2c/31/91/WhatsApp_Image_2020-10-22_at_02.35.53.jpeg"></p>
</body></html>

HPI wheely king 4x4 axel servo mount


axel servo mount for HPI wheely king 4x4

for standart servo

Thingscanner

Some articles you might like