Name: 3 pcs Drill Adapter Set Wall Holder 055 I for screws or peg board
Brand: WIESEMANN1893
Availability: InStock

3D printer filament requires special care when it comes to storage. Read on for our top 10 homemade and purchased filament storage solutions!

3D Printer Filament Storage: 10 Ways to Store Filament | All3DP

No one likes clutter. Invest in home improvement and get your place in order with these great 3D printed shelves!

3D Printed Shelves: 10 Great Storage Solutions | All3DP

Filament is fundamental to any FDM print job. Go beyond the standard 3D printer filament holder and storage device.

10 Must-Have 3D Printing Filament Accessories | All3DP

IBM and ETH Zurich have used 3D printing to construct a redox flow battery that could enhance energy storage.

IBM & ETH Zurich 3D Print Liquid Batteries To Enhance Energy Storage | All3DP

These 3D printed accessories keep your desktop clutter-free: Get rid of cable clutter, easily retrieve storage cards, batteries or pens.

Tidy Up Your Desk Using 3D Printed Accessories | All3DP

Empty filament spools are a nuisance. Hacking objects is not. With 3D printing you can turn a spent spool into a handy storage solution.

Use Leftover Filament Spools as Tool Drawers with this Nifty Hack | All3DP

Lovers of tabletop games rejoice! Find miniatures, storage, and even board games on our list of the best sites for 3D printed tabletop stuff.

The Best Sites for 3D Printed Tabletop Stuff | All3DP

Want to keep your filament in tip-top shape? Engineer and 3D printing enthusiast RichRap shows us how to create DIY Heated DryBox for 3D Printing filament for under $20.  

3D Printing Project: $20 DIY Heated Dry Box for Filament Storage | All3DP

You can’t have enough storage in a computer. So why not add up to three more extra drives to your PC with this 3d printed hard drive rack?

Drive rack for three hard drives | All3DP

Every once in a while, you get a 3D printable design that is simple yet genius. This 3D printed Pokeball storage box looks like it sprang right out of Minecraft.

Store your Loot in This Wonderful 3D Printed Pokebox | All3DP

1. The basics Card Storage If you don’t own a DSLR from the professional DSLR lineup, you’ll have standard SD cards in your camera. This 3D printed wallet SD case takes and protects 4 of them. If you have a lot more of them and need to keep the data, an index box for SD […]

3D Printed DSLR Accessories For Photographers | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>It&apos;s a box that can be stacks.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print the box with support if your printer can&apos;t do well overhang.</p></div>
</body></html>

Workshop Box

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a drawer for the Ender3 2020+ Model. I had tried other drawers and they were to short, this one is not! (NOT SURE IF PRO IS SAME)</p>
<p>It fits basically all of the essentials that come with the ender 3 including the USB and all the Allen Keys needed/received with the ender 3.</p>
<p>Drawer V1 you will have to remove the display screen to get it in. You should be able to flex it enough without having to remove the belt for the Y - Axis.</p>
<p>FIrst design and planning on bringing more to the scene! :3 Happy printing!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=CCTRee+PLA&amp;tag=tv-auto-20" target="_blank">
                        CCTRee PLA                    </a>

                    Gray
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used PLA from CCTree and I have used a 0.4mm nozzle with the settings listed.</p></div>
</body></html>

Ender 3 Drawer/Tray (2020 Model/Perfect Fit)

This is a drawer for the Ender3 2020+ Model. I had tried other drawers and they were to short, this one is not! (NOT SURE IF PRO IS SAME)

It fits basically all of the essentials that come with the ender 3 including the USB and all the Allen Keys needed/received with the ender 3.

Drawer V1 you will have to remove the display screen to get it in. You should be able to flex it enough without having to remove the belt for the Y - Axis.

FIrst design and planning on bringing more to the scene! :3 Happy printing!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design for a wall mount Hot Glue Gun storage with a glue stick holder and hook for cord storage. This is designed for one of the larger models where the gun opening is 1 1/2&quot; x 2&quot;</p>
<p>Please let me know your thoughts in the comments and let me know if there are any changes you feel would improve the end product.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=All3Dp+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        All3Dp PLA+                    </a>
</body></html>

Glue Gun Storage

My design for a wall mount Hot Glue Gun storage with a glue stick holder and hook for cord storage. This is designed for one of the larger models where the gun opening is 1 1/2" x 2"

Please let me know your thoughts in the comments and let me know if there are any changes you feel would improve the end product.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My attempt at a zippo case as airtight as possible to keep from evaporation. </p>
<p>I use a lighter from time to time for non smoking reasons but didn&apos;t want to deal with my zippo  having its fuel evaporate every 1-2 weeks. Ive been looking for solutions for cases and have tried a few different things. This is still a test, but I am hoping with this I keep it still easily accessible while also at least keeping things fairly bottled up.</p>
<p>The way you would normall store it is put the lighter inside head first, close the lid and put the the side with the lid on the surface so the area around the lid is blocked by the surface. this case should also still be relatively pocketable and keep any fluid from dripping if you face that issue.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SUNLU+PLA&amp;tag=tv-auto-20" target="_blank">
                        SUNLU PLA                    </a>

                    Silk Gray
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>so I put supports on mine and when I printed I faced some issues with under extrustion where the supports were - you can see this issue in the pictures. I resolved this by just sealing it and welding with a 3d pen, but I am still testing the best way to properly print this without it getting all messed up.</p></div>
</body></html>

Zippo lighter anti evaporation case

My attempt at a zippo case as airtight as possible to keep from evaporation. 

I use a lighter from time to time for non smoking reasons but didn't want to deal with my zippo  having its fuel evaporate every 1-2 weeks. Ive been looking for solutions for cases and have tried a few different things. This is still a test, but I am hoping with this I keep it still easily accessible while also at least keeping things fairly bottled up.

The way you would normall store it is put the lighter inside head first, close the lid and put the the side with the lid on the surface so the area around the lid is blocked by the surface. this case should also still be relatively pocketable and keep any fluid from dripping if you face that issue.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for 6 pcs chisel set.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 206mm<br>
W - 60mm<br>
H - 93mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for the 6pcs chisel set from WIESEMANN 1893 | Art Nr 81284</strong></p>
                <div><p>We developed this holder for the 6 pcs chisel set. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/stechbeitel-set-6tlg">https://wiesemann1893.com/products/stechbeitel-set-6tlg</a> However the holder should be compatible with every other large ratchet of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/47/bf/98/22/dd/81284_ma%C3%9Fe.jpg"></p>
                <p class="detail-caption"><strong>6 pcs chisel set from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/dc/f3/f2/34/76/2402-10.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Chisel Set 6pcs holder 065 I for screws or peg board

Tool holder for 6 pcs chisel set.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 206mm
W - 60mm
H - 93mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for 4 pcs chisel set.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 206mm<br>
W - 60mm<br>
H - 53mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for the 4pcs chisel set from WIESEMANN 1893 | Art Nr 81291</strong></p>
                <div><p>We developed this holder for the 4 pcs chisel set. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/stechbeitel-set-4tlg">https://wiesemann1893.com/products/stechbeitel-set-4tlg</a><br>
However the holder should be compatible with every other large ratchet of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/ac/45/5d/83/4c/81291_ma%C3%9Fe.jpg"></p>
                <p class="detail-caption"><strong>4 pcs chisel set from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/9b/86/e9/22/c8/2402-56.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Chisel Set 4pcs holder 064 I for screws or peg board

Tool holder for 4 pcs chisel set.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 206mm
W - 60mm
H - 53mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for Splitting and Cutting Wedge.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 80mm<br>
W - 61,10mm<br>
H - 145,74mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for Cutting and Splitting Wedge from WIESEMANN 1893 | Art Nr 81413</strong></p>
                <div><p>We developed this holder for the cutting wedge and splitting wedge. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/alukeil">https://wiesemann1893.com/products/alukeil</a><br>
However the holder should be compatible with every other wedge of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/5c/b2/49/9b/d4/l%C3%A4nge_011.jpg"></p>
                <p class="detail-caption"><strong>Splitting Wedge from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/35/5d/35/52/79/_DSC9349.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Wedge Holder for Splitting and Cutting Wedge  070 I for screws or peg board

Tool holder for Splitting and Cutting Wedge.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 80mm
W - 61,10mm
H - 145,74mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

Pen holder cart theme

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for Oil Change Tool Set 18pcs.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 150mm<br>
W - 87,99mm<br>
H - 74,99mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for Oil Change Tool Set 18pcs from WIESEMANN 1893 | Art Nr 80232</strong></p>
                <div><p>We developed this holder for the Oil Change Tool Set 18pcs. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/olablassschrauben-set">https://wiesemann1893.com/products/olablassschrauben-set</a> However the holder should be compatible with every other oil filter set of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/45/5f/f5/f4/10/gr%C3%B6%C3%9Fen_01.jpg"></p>
                <p class="detail-caption"><strong>Oil filter tool set from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/39/9a/46/fa/96/_DSC9375.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Holder for Oil Change Tool Set 18pcs 014 I for screws or peg board

Tool holder for Oil Change Tool Set 18pcs.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 150mm
W - 87,99mm
H - 74,99mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for Socket Wrench Set 20pcs.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 167,09mm<br>
W - 82,3mm<br>
H - 94,55mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for Socket Wrench Set 20pcs from WIESEMANN 1893 | Art Nr 80041</strong></p>
                <div><p>We developed this holder for the Socket Wrench Set 20pcs. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/steckschlusselsatz-halb-zoll-1">https://wiesemann1893.com/products/steckschlusselsatz-halb-zoll-1</a> However the holder should be compatible with every other large ratchet of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/eb/d3/d6/02/10/80041_Ma%C3%9Fe.jpg"></p>
                <p class="detail-caption"><strong>Socket Wrench Set 20pcs from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/7f/f4/b0/e9/fd/_DSC8779.jpg"></p>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Tool Holder for Socket Wrench Set 20pcs 1/2" with Extension Bar and Sockets for Wall Mount 004

Tool holder for Socket Wrench Set 20pcs.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 167,09mm
W - 82,3mm
H - 94,55mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for Socket Set 34pcs 3/8 inch.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 64mm<br>
W - 41,21mm<br>
H - 102,4mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for Socket Set 34pcs 3/8 inch from WIESEMANN 1893 | Art Nr 80164</strong></p>
                <div><p>We developed this holder for the Socket Set 34pcs 3/8 inch. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/grosser-steckschlussel-bit-satz-fur-torx-schrauben">https://wiesemann1893.com/products/grosser-steckschlussel-bit-satz-fur-torx-schrauben</a> However the holder should be compatible with every other set of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/90/95/f5/8d/7c/gr%C3%B6%C3%9Fen_01.jpg"></p>
                <p class="detail-caption"><strong>Socket Set 34pcs from WIESEMANN 1893</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/81/fe/b3/44/ff/_DSC8729.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

Tool Holder for Socket Set 34pcs 3/8 inch 009 I for screws or peg board

Tool holder for Socket Set 34pcs 3/8 inch.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 64mm
W - 41,21mm
H - 102,4mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Tool holder for 3 pcs Drill Adapter Set.</p>
<p>We provide two versions to download:</p>
<p>Screw: 4mm holes for standard screws for mounting on wooden or stoned walls<br>
Pins: for peg boards of standard size<br>
Sizes:<br>
L - 80mm<br>
W - 38,99mm<br>
H - 40,49mm</p>
<p>We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GEEETECH+PLA&amp;tag=tv-auto-20" target="_blank">
                        GEEETECH PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>We have used the following settings: - Material PLA black from GEEETECH - Layer height 0.2mm - Extruder 200&#xB0; - Bed 60&#xB0;</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-title"><strong>Optimized for 3 pcs Drill Adapter Set from WIESEMANN 1893 | Art Nr 81048</strong></p>
                <div><p>We developed this holder for the3 pcs Drill Adapter Set. You find the product in our shop: <a rel="nofollow" href="https://wiesemann1893.com/products/bohrmaschinen-adapter-set">https://wiesemann1893.com/products/bohrmaschinen-adapter-set</a> However the holder should be compatible with every other large ratchet of course =)</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/d1/1c/c6/3d/1d/gr%C3%B6%C3%9Fen_01.jpg"></p>
                <p class="detail-caption"><strong>3 pcs Drill Adapter Set from WIESEMANN 1893 </strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/e4/f5/ac/69/39/_DSC1957.jpg"></p>
                    <p class="detail-title"><strong>ENABLE 3D Project</strong></p>
                <div><p>With ENABLE 3D we make a further step towards becoming the leading hand tool brand in the field of additive manufacturing. As the first tool manufacturer we provide 3D printable holders for each of our tools. We also support community developments - feel free join our community of like minded makers and submit your design to make it a certified accessory to one of our products. <a rel="nofollow" href="https://wiesemann1893.com/pages/communitydevelopment">https://wiesemann1893.com/pages/communitydevelopment</a> enable3d@wiesemann1893.com</p></div>
</body></html>

3 pcs Drill Adapter Set Wall Holder 055 I for screws or peg board

Tool holder for 3 pcs Drill Adapter Set.

We provide two versions to download:

Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
Pins: for peg boards of standard size
Sizes:
L - 80mm
W - 38,99mm
H - 40,49mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

Thingscanner

Some articles you might like