Sure, you could have an ordinary headset stand, or you could make some big audio dynamite with a 3D printed headphone stand. Choose wisely!

22 Best Headphone Stands and Headset Stands to 3D Print | All3DP

3D printing a phone stand is both fun and useful, so why not give it a go? Here are some of the best 3D printed phone stand models available to download.

3D Printed Phone Stand – 6 Best Curated Models | All3DP

This simple 3D printed iPad Stand is a great starter-kit for resting your iPad because of its affordability and portability.

3D Printed Barebones iPad Stand | All3DP

This 3D printed watch stand is a stylish way of storing watches over night or for displaying them.

3D printed Watch Stand Float | All3DP

The Pebble Vertical Stand keeps your Pebble Watch upright and it's display visible while the battery is charging.

3D Printed Pebble Vertical Stand | All3DP

Bsnug is a 3D printed lightweight smartphone stand that also keeps your earbud cords untangled and safe.

3D Printed Smartphone Stand Bsnug | All3DP

This 3D printed stand protects your Apple Watch from getting scratches while the battery charges.

3D Printed Charging Stand for Apple Watch | All3DP

The 3D printed iPad stand is a stylish, yet convenient way of resting your iPad as you work or use the tablet for entertainment.

3D Printed iPad Stand in iMac Design | All3DP

You’ve heard of 3D printed guns. But did you ever think about protect yourself from bullets using a 3D printer? A video shares some interesting results.

Can 3D Printing Stand Up To Bullets? | All3DP

This 3D Clip Stand provides angled support for your tablet or phone on flat surfaces. It can also serve as a handle or a hand strap.

3D Clip Stand for Tablet or Smartphone | All3DP

Sometimes simpler is better. This simple Apple Watch charging stand ain't pretty but it gets the job done and that's all that matters.

3D Printed Apple Watch 42 Charging Stand | All3DP

The Tabletop Stand allows hands-free use of your tablet or Kindle, hence it is great for watching videos or reading ebooks

Tabletop Stand for Tablets, Ebook Readers and Smartphones | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Soporte para m&#xF3;viles con espacio para 3 smartphone con hueco disponible para situar el cable de carga y realizar la recarga mientras que esta en la peana </p>
<hr><p>Mobile support with space for 3 smartphone with gap available to place the charging cable and recharge while on the stand</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery X1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SmartMateriaL+ABS&amp;tag=tv-auto-20" target="_blank">
                        SmartMateriaL ABS                    </a>

                    Blanco
</body></html>

Soporte múltiple para moviles 

Soporte para móviles con espacio para 3 smartphone con hueco disponible para situar el cable de carga y realizar la recarga mientras que esta en la peana 

---------------------------

Mobile support with space for 3 smartphone with gap available to place the charging cable and recharge while on the stand

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>1x1&quot; aluminum drill fixture, Easy way to fixture a 1&quot; or 1.5&quot; hole pattern:</p>
<p>Easy way to lighten your 1x1&quot; alum tubing and have it look professional. Mount to your drill press, can screw to plywood or 2x4 for ease of mounting. drill first hole in tube, place hole over protrusion, drill new hole and repeat. (set for 1/2&quot; drill)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Fusion3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80-100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=hatchbox+ABS&amp;tag=tv-auto-20" target="_blank">
                        hatchbox ABS                    </a>

                    Black
</body></html>

1x1" aluminum drill fixture, Easy way to fixture a 1" or 1.5" hole pattern

1x1" aluminum drill fixture, Easy way to fixture a 1" or 1.5" hole pattern:

Easy way to lighten your 1x1" alum tubing and have it look professional. Mount to your drill press, can screw to plywood or 2x4 for ease of mounting. drill first hole in tube, place hole over protrusion, drill new hole and repeat. (set for 1/2" drill)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I wanted to keep my paper stack organised and not stacked on a big paper staple ( i guess you all know that problem ;-) ) so i was looking for a nicely designed letter/paper holder but:</p>
<p>i didn&apos;t found one that was fitting my design imaginanations, so i decided to create my own one and during the process of creating, it started to look like a taco, so here it is:</p>
<p>The Taco Letter Holder (Voronoi Style)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Sidewinder X1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.4</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Das+Filament+PLA&amp;tag=tv-auto-20" target="_blank">
                        Das Filament PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><ul><li>
<p>No Support needed</p>
</li>
<li>
<p>Resolution 0.4</p>
</li>
<li>Infill 10% ( should be enough for only paper holding... ;-) )</li>
</ul></div>
</body></html>

The Taco Letter Holder (Voronoi Style)

I wanted to keep my paper stack organised and not stacked on a big paper staple ( i guess you all know that problem ;-) ) so i was looking for a nicely designed letter/paper holder but:

i didn't found one that was fitting my design imaginanations, so i decided to create my own one and during the process of creating, it started to look like a taco, so here it is:

The Taco Letter Holder (Voronoi Style)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>display st&#xE4;nder f&#xFC;r SUNFOUNDER 7 INCH DIY TOUCHSCREEN</p>
<p>die stabilisierung der f&#xFC;sse musste soweit hinten sein.<br>
w&#xE4;re sie weiter vorne, w&#xFC;rde man den deckel nicht mehr rein bekommen.<br>
und ohne diese stabilisierung w&#xFC;rden die f&#xFC;sse zu leicht abbrechen.</p>
<p>erstellt mit Fusion360<br>
gedruckt mit Anycubic i3 Mega S</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Predator</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Geeetech+PLA&amp;tag=tv-auto-20" target="_blank">
                        Geeetech PLA                    </a>

                    All Color
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>display st&#xE4;nder f&#xFC;r SUNFOUNDER 7 INCH DIY TOUCHSCREEN</p>
<p>die stabilisierung der f&#xFC;sse musste soweit hinten sein.<br>
w&#xE4;re sie weiter vorne, w&#xFC;rde man den deckel nicht mehr rein bekommen.<br>
und ohne diese stabilisierung w&#xFC;rden die f&#xFC;sse zu leicht abbrechen.</p>
<p>erstellt mit Fusion360<br>
gedruckt mit Anycubic i3 Mega S</p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<div><p>display st&#xE4;nder f&#xFC;r SUNFOUNDER 7 INCH DIY TOUCHSCREEN</p>
<p>die stabilisierung der f&#xFC;sse musste soweit hinten sein.<br>
w&#xE4;re sie weiter vorne, w&#xFC;rde man den deckel nicht mehr rein bekommen.<br>
und ohne diese stabilisierung w&#xFC;rden die f&#xFC;sse zu leicht abbrechen.</p>
<p>erstellt mit Fusion360<br>
gedruckt mit Anycubic i3 Mega S</p></div>
</body></html>

Sunfounder 7 inch DIY Touchscreen "RASPBERRY PI" Display Ständer

display ständer für SUNFOUNDER 7 INCH DIY TOUCHSCREEN

die stabilisierung der füsse musste soweit hinten sein.
wäre sie weiter vorne, würde man den deckel nicht mehr rein bekommen. 
und ohne diese stabilisierung würden die füsse zu leicht abbrechen.

erstellt mit Fusion360
gedruckt mit Anycubic i3 Mega S

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I have in my home a mini network with 3 Raspberry Pi as servers.<br>
These Pi&apos;s all have a &quot;Heatsink Case&quot;.<br>
To optimise the passive cooling the case should be oriented so that the ribs of the case are vertical. Also the connectors must be still accessible.</p>
<p>That is why I designed and made this stand. It will hold the Pi&apos;s neatly, and will not block the airflow.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>XYZprinting</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>da Vinci 1.0 Pro 3in1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3 mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Purefil+ABS&amp;tag=tv-auto-20" target="_blank">
                        Purefil ABS                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The supports are optional, it should work without.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>Just break out the supports</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<div><p>Fusion 360</p></div>
</body></html>

Stand for Pi4 with heatsink housing

I have in my home a mini network with 3 Raspberry Pi as servers.
These Pi's all have a "Heatsink Case".
To optimise the passive cooling the case should be oriented so that the ribs of the case are vertical. Also the connectors must be still accessible.

That is why I designed and made this stand. It will hold the Pi's neatly, and will not block the airflow.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple guitar mount, designed for my D&apos;Angelico Malta. Your mileage may vary</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=amazon+PETG&amp;tag=tv-auto-20" target="_blank">
                        amazon PETG                    </a>

                    
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Designed to print without supports but make sure printbed adhesion is good if printing with PETG especially. Mounted to wall with a countersunk m6 bolt though the hole is a tad tight.</p></div>
</body></html>

Guitar holder

Simple guitar mount, designed for my D'Angelico Malta. Your mileage may vary

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>logitech brio 4K camera mount, stand style<br>
Use Zip-Tie to hold camera up, holes provided for so</p>
<p>this is a remix but Thingiverse wont allow me to add sources, sources below</p>
<p>Logitech Brio Webcam Mount<br><a rel="nofollow" href="/thing:2910402">https://www.thingiverse.com/thing:2910402</a></p>
<p>and </p>
<p>Simple PS Eye Stand (I used stand V2)<br><a rel="nofollow" href="/thing:3201202">https://www.thingiverse.com/thing:3201202</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Large Size Chiron</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=D3D+Sigma+PLA%2FABS&amp;tag=tv-auto-20" target="_blank">
                        D3D Sigma PLA/ABS                    </a>

                    orange
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>print in place, very straight forward, doesn&apos;t take a long time doesn&apos;t have to be solid</p></div>
</body></html>

Logitech Brio (4K) stand

logitech brio 4K camera mount, stand style
Use Zip-Tie to hold camera up, holes provided for so

this is a remix but Thingiverse wont allow me to add sources, sources below

Logitech Brio Webcam Mount
https://www.thingiverse.com/thing:2910402

and 

Simple PS Eye Stand (I used stand V2)
https://www.thingiverse.com/thing:3201202

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A little stand for a tablet, e-reader, or phone, to hold at a slight angle for reading.<br>
Fits basically anything that&apos;s less than 8.9mm thickness.</p>
<p>The base might be larger than necessary. I made a smaller version, but I haven&apos;t tried it yet because my 3D printer is still broken.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Elegoo Neptune</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>Any</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>Any</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Any
</body></html>

Tablet/E-Reader/Phone Stand

A little stand for a tablet, e-reader, or phone, to hold at a slight angle for reading.
Fits basically anything that's less than 8.9mm thickness.

The base might be larger than necessary. I made a smaller version, but I haven't tried it yet because my 3D printer is still broken.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple stand to hold a clipboard upright for whatever you need an upright clipboard for.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Elegoo Neptune</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>Any</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>Any</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used PLA, probably with about 20% infill</p></div>
</body></html>

Clipboard Stand

Simple stand to hold a clipboard upright for whatever you need an upright clipboard for.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a stand designed for the Ableton Push 2 controller. It fits many other controllers and even laptops as well.</p>
<p>It was designed to fit sideways on the bed of an Ender 5. Printing the model on its side gives better strength and, in my opinion, a better finish. </p>
<p>The stand allows for a 20 degrees viewing angle. It&apos;s very rigid and can probably carry more than 10kg of weight.</p>
<p>Required parts:</p>
<ul><li>8 x M3 16mm or 20mm DIN 912 bolts.</li>
</ul><p>16mm bolts will be fully recessed in the stand. 20mm will stick out as shown in the photos. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50% gyroid</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=123-3D+PLA&amp;tag=tv-auto-20" target="_blank">
                        123-3D PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used tree supports for the little tabbed extrusions, but it&apos;s not strictly necessary. Probably prints fine without it, but I haven&apos;t tested it.</p>
<p>The model was optimized for 0.2mm layer height.</p></div>
</body></html>

Ableton Push 2 stand

This is a stand designed for the Ableton Push 2 controller. It fits many other controllers and even laptops as well.

It was designed to fit sideways on the bed of an Ender 5. Printing the model on its side gives better strength and, in my opinion, a better finish. 

The stand allows for a 20 degrees viewing angle. It's very rigid and can probably carry more than 10kg of weight.

Required parts:
- 8 x M3 16mm or 20mm DIN 912 bolts.

16mm bolts will be fully recessed in the stand. 20mm will stick out as shown in the photos. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Bonjour &#xE0; toute et &#xE0; tous !</p>
<p>Voici un support de t&#xE9;l&#xE9;phone vertical Qi !</p>
<p>Il vous permet, si vous poss&#xE9;dez d&#xE9;j&#xE0; un chargeur Qi &quot;&#xE0; plat&quot; de le convertir &#xE0; la verticale.</p>
<p>Le chargeur Qi ne doit pas d&#xE9;passer 100 mm de diam&#xE8;tre et 8.3 mm d&apos;&#xE9;paisseur afin de rentrer dans l&apos;encoche.</p>
<p>Il suffit ensuite simplement de le brancher par dessous et de poser votre t&#xE9;l&#xE9;phone :)<br>
J&apos;ai &#xE9;galement pr&#xE9;vu des petites &quot;encoches&quot; afin d&apos;y coincer le c&#xE2;ble et de le maintenir</p>
<p>Pour l&apos;impression, il vous suffit de l&apos;imprimer &#xE0; la verticale avec des supports pour le dessous du chargeur ( tr&#xE8;s peu de supports)</p>
<p>A bient&#xF4;t ! ;)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>
</body></html>

Stand Qi Phone Charger

Bonjour à toute et à tous !

Voici un support de téléphone vertical Qi !

Il vous permet, si vous possédez déjà un chargeur Qi "à plat" de le convertir à la verticale.

Le chargeur Qi ne doit pas dépasser 100 mm de diamètre et 8.3 mm d'épaisseur afin de rentrer dans l'encoche.

Il suffit ensuite simplement de le brancher par dessous et de poser votre téléphone :)
J'ai également prévu des petites "encoches" afin d'y coincer le câble et de le maintenir

Pour l'impression, il vous suffit de l'imprimer à la verticale avec des supports pour le dessous du chargeur ( très peu de supports)

A bientôt ! ;)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Minimalist iPhone 12 stand modeled after the one by Piolo.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2 mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I haven&apos;t printed this. If I were going to I would probably print it with the longest edge on the bed to minimize supports, and with a brim so it doesn&apos;t fall over.</p></div>
</body></html>

Minimalist Phone Stand

Minimalist iPhone 12 stand modeled after the one by Piolo.

Thingscanner

Some articles you might like