Smartphone → Dumb human ∴ Dumbphone → Smart human? Turn your smartphone into a Dumbphone with 3D Printing... and learn to live again.

3D Printed Dumbphone Case Makes Your Smartphone... Better! | All3DP

A portable 3D printer powered by your smartphone for only $99 bucks? Amazing! OLO smartphone 3D printer coming to Kickstarter on 21 March.

OLO Smartphone 3D Printer on Kickstarter on 21 March | All3DP

Bsnug is a 3D printed lightweight smartphone stand that also keeps your earbud cords untangled and safe.

3D Printed Smartphone Stand Bsnug | All3DP

Transform your smartphone into a 3D printer for just $100? This technology amazed participants at the recent Inside 3D Printing Show in Shanghai. 

Smartphone 3D Printer For Just $100 | All3DP

Due to a trademark dispute, the $99 smartphone 3D printer that raised $2.3m on Kickstarter is rebranded from OLO to ONO.

OLO Smartphone 3D Printer Renamed ONO | All3DP

Researchers at the University of Houston have developed a way for just about anyone to turn their smartphone's camera into a microscope.

Researchers Turn Smartphone into a Microscope | All3DP

This 3D Clip Stand provides angled support for your tablet or phone on flat surfaces. It can also serve as a handle or a hand strap.

3D Clip Stand for Tablet or Smartphone | All3DP

After 3D printed fingers failed to unlock a murder victim's smartphone, researchers resorted to using traditional 2D printing instead.

Murder Victim's Smartphone Unlocked with 2D Printing | All3DP

A smartphone 3D scanner is the hot new thing on Kickstarter. For under $300, the system promises high-res scans in just 5 minutes.

High-Precision 3D Scanner for Your Smartphone | All3DP

Guest post from Paulo Kiefe, CEO of Creative Tools, about the inspiration and development of their new smartphone photo studio.

New Smartphone Photo Studio from the 3DBenchy Team | All3DP

Convert your smartphone into a holographic projector with the Holo-Z, a 3D printed accessory available to buy on Sculpteo.

Create Holograms with your Smartphone using Holo-Z | All3DP

Powered by a Raspberry Pi, the TyTelli is a DIY 3D printed smartphone which anyone can make for themselves.

Build your Own TyTelli Smartphone with 3D Printing | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Soporte para m&#xF3;viles con espacio para 3 smartphone con hueco disponible para situar el cable de carga y realizar la recarga mientras que esta en la peana </p>
<hr><p>Mobile support with space for 3 smartphone with gap available to place the charging cable and recharge while on the stand</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery X1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SmartMateriaL+ABS&amp;tag=tv-auto-20" target="_blank">
                        SmartMateriaL ABS                    </a>

                    Blanco
</body></html>

Soporte múltiple para moviles 

Soporte para móviles con espacio para 3 smartphone con hueco disponible para situar el cable de carga y realizar la recarga mientras que esta en la peana 

---------------------------

Mobile support with space for 3 smartphone with gap available to place the charging cable and recharge while on the stand

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A quick design i&apos;m currently printing (not sure how everything will work).</p>
<p>I&apos;m going to add little rubber feet on all pieces to keep it from skidding.</p>
<p>It&apos;s designed to be a modular desk organizer. Print all pieces as you need them, but it&apos;s made so you can create your own attachments. Currently i&apos;ve added a folder organizer and phone holder. I made this for a friend because other models i&apos;ve found that are similar took too long to print and i needed to get this out.</p>
<p>Print the body with supports. Might be able to get away without it, but I don&apos;t have the time to try.</p>
<p>Print the side accessory on the larger flat side so you don&apos;t need supports and to increase overall strength (it&apos;s meant to hold folders/laptop/etc)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA+White+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA White PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Use glue on your glass beds if you have it. First few attempts warped for me.</p>
<p>I did a brim on mine to ensure good adhesion.</p></div>
</body></html>

Modular Desk Organizer

A quick design i'm currently printing (not sure how everything will work).

I'm going to add little rubber feet on all pieces to keep it from skidding.

It's designed to be a modular desk organizer. Print all pieces as you need them, but it's made so you can create your own attachments. Currently i've added a folder organizer and phone holder. I made this for a friend because other models i've found that are similar took too long to print and i needed to get this out.

Print the body with supports. Might be able to get away without it, but I don't have the time to try.

Print the side accessory on the larger flat side so you don't need supports and to increase overall strength (it's meant to hold folders/laptop/etc)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Multiple Organizer that fits JOYCONS phone, multiple memories and a box for pencils or other thing, Already modified to hold the controllers straight. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Cheap+not+branded+PLA&amp;tag=tv-auto-20" target="_blank">
                        Cheap not branded PLA                    </a>

                    copper
</body></html>

Multiple Organizer

Just my design of a Multiple Organizer that fits JOYCONS phone, multiple memories and a box for pencils or other thing, Already modified to hold the controllers straight. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Couldnt find any necklace cases for the fairphone 3.</p>
<p>Printed in TPU</p></div>
</body></html>

Fairphone Necklace Case Hanger

Couldnt find any necklace cases for the fairphone 3.

Printed in TPU

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A simple Car Sun Visor Phone Holder. Designed based on iPhone 11 but it should works for all other models/brands, as long as it&apos;s not too large...<br>
Easy to print.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The slides should be tight enough to hold, but not tight to slide.</p></div>
</body></html>

Car Sun Visor Phone Holder

A simple Car Sun Visor Phone Holder. Designed based on iPhone 11 but it should works for all other models/brands, as long as it's not too large...
Easy to print.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple design for a phone holder. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Ziro3D+PLA&amp;tag=tv-auto-20" target="_blank">
                        Ziro3D PLA                    </a>

                    Marble
</body></html>

Simple Phone Stand

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Universal phone holder</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+Petg+and+Tpu&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex Petg and Tpu                    </a>

                    Black
</body></html>

Phone Holder

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>an iPhone 6s case inspired by doctor who logo. I broke down something when editing (I&apos;m new: P) so, when printing scale it down to %10. it should fit perfectly. if I got time I will fix it later. if it is fixed you don&apos;t see that.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>%10</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=++PLA&amp;tag=tv-auto-20" target="_blank">
                          PLA                    </a>

                    grey
</body></html>

iphone 6s doctor who concept case

an iPhone 6s case inspired by doctor who logo. I broke down something when editing (I'm new: P) so, when printing scale it down to %10. it should fit perfectly. if I got time I will fix it later. if it is fixed you don't see that.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Creado como otra soluci&#xF3;n para dejar el tel&#xE9;fono en diferentes posiciones. Al ser de material flexible (TPU) no raya, es suave, de una sola pieza y muy f&#xE1;cil de imprimir.</p>
<p>El sonido es mejor con un soporte de este material.</p>
<p>El tama&#xF1;o es como para un  perfectamente escalable.<br>
La anchura de la pieza (20mm) garantiza estabilidad, agarre y firmeza.</p>
<p>Gracias por mirar mi cosa, espero que os guste.</p>
<p>Imprimir con material TPU. 25 de relleno y 2.5 capa.<br>
Sugiero una o varias pruebas de impresi&#xF3;n de pocos minutos y adaptar la escala para vuestro modelo.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=tpu+TPU+&amp;tag=tv-auto-20" target="_blank">
                        tpu TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Imprimir con material TPU. 25 de relleno y 2.5 capa. Sugiero una o varias pruebas de impresi&#xF3;n de pocos minutos y adaptar la escala para vuestro modelo.</p></div>
</body></html>

soporte para teléfono TPU

Creado como otra solución para dejar el teléfono en diferentes posiciones. Al ser de material flexible (TPU) no raya, es suave, de una sola pieza y muy fácil de imprimir.

El sonido es mejor con un soporte de este material.

El tamaño es como para un  perfectamente escalable.
La anchura de la pieza (20mm) garantiza estabilidad, agarre y firmeza.

Gracias por mirar mi cosa, espero que os guste.

Imprimir con material TPU. 25 de relleno y 2.5 capa.
Sugiero una o varias pruebas de impresión de pocos minutos y adaptar la escala para vuestro modelo.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple stand, made for my HoneyPi tablet, that allows the phone to be charged.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Wanhao</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2DqRItw?tag=tv-auto-20" target="_blank">Wanhao Duplicator i3 Plus</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Partocea+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Partocea TPU                     </a>

                    Black
</body></html>

Phone / tablet stand, allows charging.

Simple stand, made for my HoneyPi tablet, that allows the phone to be charged.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Easy way to put yours phones sleeping and recharge them!</p>
<p>This object is composed by 3 elements so 3 .stl files (Base,Tower and phone&apos;s bed).</p>
<p>Base and towers are printable with NO SUPPORTS, so put yours towers on their side.</p>
<p>Very easy to print!!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Large Size Chiron</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.58</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SUNLU+PETG%2CPLA&amp;tag=tv-auto-20" target="_blank">
                        SUNLU PETG,PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used SUNLU PETG. Print Speed of 50mm/s. </p>
<p>If you print  PETG filament never go below 240-245&#xB0;, this is my tip.</p></div>
</body></html>

Triple Universal Smartphone's Base



Easy way to put yours phones sleeping and recharge them!

This object is composed by 3 elements so 3 .stl files (Base,Tower and phone's bed).

Base and towers are printable with NO SUPPORTS, so put yours towers on their side.

Very easy to print!!


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Horizontal smartphone holder to for the Rogue Echo Bike.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=colorFabb+PLA&amp;tag=tv-auto-20" target="_blank">
                        colorFabb PLA                    </a>
</body></html>

Rogue Echo Bile Phone Holder

Horizontal smartphone holder to for the Rogue Echo Bike.

Thingscanner

Some articles you might like