With an FDM 3D printer, you'll likely need to dry out your filament from time to time. Check out our simple guide to filament dryers.

Filament Dryer – A Simple Guide | All3DP

Elegoo's resin for UVA-based 3D printing is a solid choice. Find out about its dependable layer adhesion, minimum fumes, and minimal warping.

Elegoo Resin – A Simple Guide | All3DP

If you're looking for resin, take a look at the offers from Anycubic. Resin just happens to be one of their specialties. Learn more about their selection!

Anycubic Resin – A Simple Guide | All3DP

It is a powerful, yet relatively simple to use 3D creation and editing tool. For more details, read this Autodesk's 123D Design review

Autodesk 123D Design Review: Powerful & Simple | All3DP

Get a smooth, even first layer with mesh bed leveling. In this guide we simply explain this leveling process and show you how to implement it yourself.

Mesh Bed Leveling: A Simple Guide | All3DP

Without the right bits, even the perfect CNC rig won't be going very far. Check out our simple guide to CNC router bits.

CNC Router Bits – A Simple Guide | All3DP

Anycubic's Photon uses its own proprietary slicer. Dig into this Anycubic Photon slicer guide. We show you all you need to know to get started!

Anycubic Photon Slicer – A Simple Guide | All3DP

Just weeks away from launch, Printrbot CEO Brook Drumm reveals some exciting details about the new Printrbot Simple V2.

Printrbot Simple V2 Capable of 50 Microns | All3DP

The Zortrax Inventure is a new dual extrusion 3D printer that is both intelligent and accessible. This Polish 3D printer includes a Dissolvable Support System Station and a completely enclosed and stable heated print chamber.

Zortrax Inventure: Smart, Simple, and Super Convenient | All3DP

Nerved by 3D printer under-extrusion and don't know how to get rid of it? Check out this guide, which gives 3 simple solutions.

3D Printer Under-Extrusion: 3 Simple Solutions | All3DP

Are you fed up with blobs, strings, or jams? Check out this guide for three simple solutions that will fix your 3D printer over-extrusion problems forever!

3D Printer Over-Extrusion: 3 Simple Solutions | All3DP

Vanquish those layer lines and make your 3D printed part look more professional! Learn all about ABS vapor smoothing!

ABS Acetone Vapor Smoothing: A Simple Guide | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>&#xE9;querres simples pour petite &#xE9;tag&#xE8;re.<br>
Simple brackets for little shelf.</p>
<p>Longueur de contacte avec l&apos;&#xE9;tag&#xE8;re : 7cm(v2) et 11cm(v4).<br>
Longueur de contacte avec le mur : 6,7cm.</p>
<p>Diam&#xE8;tre des trous : 4mm.<br>
Diam&#xE8;tre des trous pour les t&#xEA;tes de visses : 7mm.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PLA&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PLA                    </a>

                    Gris
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-title"><strong>Fusion 360</strong></p>
                <div><p>Avec des fonctionnalit&#xE9;s basiques, facile &#xE0; reproduire.</p></div>
</body></html>

équerre simple

équerres simples pour petite étagère.
Simple brackets for little shelf.

Longueur de contacte avec l'étagère : 7cm(v2) et 11cm(v4).
Longueur de contacte avec le mur : 6,7cm.

Diamètre des trous : 4mm.
Diamètre des trous pour les têtes de visses : 7mm.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Basic ring to attach a hanging plant to a wall bracket. Default scale should be 8mm thick, and about 48mm in diameter.</p>
<p>You can find the remixed plant hanger/bracket here: <a rel="nofollow" href="/thing:4640610">https://www.thingiverse.com/thing:4640610</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Push+Plastic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Push Plastic PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>No supports needed!</p></div>
</body></html>

Plant Hanger - Ring

Basic ring to attach a hanging plant to a wall bracket. Default scale should be 8mm thick, and about 48mm in diameter.

You can find the remixed plant hanger/bracket here: https://www.thingiverse.com/thing:4640610

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hi everyone. Today I bring you another model built in blender, it is salad fingers the protagonist of the homonymous web series, I hope you like it.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Doesn%27t+matter+PLA&amp;tag=tv-auto-20" target="_blank">
                        Doesn&apos;t matter PLA                    </a>

                    White
</body></html>

Salad Fingers

Hi everyone. Today I bring you another model built in blender, it is salad fingers the protagonist of the homonymous web series, I hope you like it.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

radioddity gd-77  Hotspot

Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a fan bracket to Direct Drive Swiss, you need glueing 2 fans (Stock ender 3 V2), Screw M2 35 mm </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSun++ABS+plus&amp;tag=tv-auto-20" target="_blank">
                        eSun  ABS plus                    </a>

                    Black
</body></html>

Simple Ender 3 V2 bracket FANS to Direct Drive Micro Swiss

Just my design of a fan bracket to Direct Drive Swiss, you need glueing 2 fans (Stock ender 3 V2), Screw M2 35 mm 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hello everyone, I bring you a new design, this time of a very simple and easy to print lighthouse. Perfect to combine with boat or beach toys. Hope you like it</p>
<p>TIP: Try to print it limiting a part of the support so that it is easier to remove it.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Doesn%27t+matter+PLA&amp;tag=tv-auto-20" target="_blank">
                        Doesn&apos;t matter PLA                    </a>

                    White
</body></html>

Simple Lighthouse

Hello everyone, I bring you a new design, this time of a very simple and easy to print lighthouse. Perfect to combine with boat or beach toys. Hope you like it


TIP: Try to print it limiting a part of the support so that it is easier to remove it.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Cat rings and earrings based on a ring I saw in internet.</p>
<p>Rings in 2 sizes versions<br>
Earrings in 3 sizes and you can easly resize it to what you want (I recommend to resize only at X and Y axis, without Z)</p>
<p>Made in Blender 3D<br>
Printed on Ender 3 (0.4mm nozzle, 0.1mm layer hight)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Spectrum+PLA&amp;tag=tv-auto-20" target="_blank">
                        Spectrum PLA                    </a>

                    Pearl Gold
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>No supports should be needed, but if you can fit them under the tail at the ring you can use it for better effect.</p></div>
</body></html>

Cat ring / earring

Cat rings and earrings based on a ring I saw in internet.

Rings in 2 sizes versions
Earrings in 3 sizes and you can easly resize it to what you want (I recommend to resize only at X and Y axis, without Z)

Made in Blender 3D
Printed on Ender 3 (0.4mm nozzle, 0.1mm layer hight)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>a 4 part vertical to be glued together, with tape to hold the 4 together to create a hinge. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>XYZprinting</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>da Vinci mini w</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=XYZPrinting++PLA&amp;tag=tv-auto-20" target="_blank">
                        XYZPrinting  PLA                    </a>

                    Black
</body></html>

Flite Test Simple Cub Vertical Stabilizer

a 4 part vertical to be glued together, with tape to hold the 4 together to create a hinge. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A recurve coat hook with 30mm inner curve diameter on both upper and lower curves.</p>
<p>Chamfer of screwholes at 45&#xB0; and designed to work with standard drywall screws.</p>
<p>I use this as a #3DBenchy of sorts for myself; not that it&apos;s overly complicated but I like to see how different printer settings fair with being mechanically fixed and put under load.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Amazon+Basic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Amazon Basic PLA                    </a>

                    Any
</body></html>

⌀30mm Recurve Coat Hook

A recurve coat hook with 30mm inner curve diameter on both upper and lower curves.

Chamfer of screwholes at 45° and designed to work with standard drywall screws.

I use this as a #3DBenchy of sorts for myself; not that it's overly complicated but I like to see how different printer settings fair with being mechanically fixed and put under load.



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A geometric flower pot design that I made for fun.<br>
It has a base lid to collect the water, and holes at to bottom for the excess water to drip.<br>
Took about 18 hours to print at 0.25 resolution, and about 160 grams of filament (both pieces).<br>
I also added an image of the settings I used when printing. I guess they could be improved though.<br>
Feel free to use this however you want (remix, commercial or whatever).<br>
I will add pictures of my print and settings when it&apos;s done printing :)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Anycubic Mega X</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Devil+Design+PLA&amp;tag=tv-auto-20" target="_blank">
                        Devil Design PLA                    </a>

                    Light Orange
</body></html>

Geometric Plant Pot

A geometric flower pot design that I made for fun.
It has a base lid to collect the water, and holes at to bottom for the excess water to drip.
Took about 18 hours to print at 0.25 resolution, and about 160 grams of filament (both pieces).
I also added an image of the settings I used when printing. I guess they could be improved though.
Feel free to use this however you want (remix, commercial or whatever).
I will add pictures of my print and settings when it's done printing :)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>As new waves of Covid-19 spread continues, we decided to do something about it. Pooling all our talents together at RoboForce, we came up with this. Designed by our Techno Wizards, this hand sanitizer dispenser is easy to build, simple and reliable.</p>
<p>The goal of this design is to ensure that it is simple enough for the anyone to build and maintain while providing a platform for advanced users to buildon. Basically, anyone with a 3D printer and access to simple materials can build it.</p>
<p>STEP files are also included for any customization.</p>
<p>Materials needed:<br>
1x Small DC motor<br>
1x TIP125 PNP transistor<br>
1x IR proximity sensor<br>
1x USB cable (Only the 5V and GND wire is used)<br>
6x 693ZZ bearings<br>
2x M3x25mm cap screw<br>
3x M3x12mm button head screws<br>
4x M3x6mm countersunk screws<br>
1x 3D printed cover<br>
1x 3D printed rotor<br>
1x 3D printed pump body with integrated mounting<br>
6mm OD 4mm ID silicone tubing (Length depend on your bottle height. Minimum 200mm)</p>
<p>Assembly:</p>
<ol><li>Stack 2 bearings and secure it to the rotor with button head screws. Repeat for all 3 sides.</li>
<li>Insert the silicone tubing into the pump body.</li>
<li>Push the silicone tube to the circular edge and insert the rotor.</li>
<li>Align and insert the motor shaft into the rotor. Do not push in all the way, leave a small gap between the rotor and pump body.<br>
5, Secure the motor with cap screws.</li>
<li>Insert the IR proximity sensor into the slots and secure with countersunk screw.</li>
<li>Test the pump with water. It is self priming and can pump fluid even when the tube is full of air.</li>
<li>Secure the cover with countersunk screws.</li>
<li>Connect the transistor and the USB cable.</li>
<li>Get a PET soda bottle. Drill a 6mm hole on the cap.</li>
<li>Push the tube through and press fit the pump body on the bottle cap.</li>
<li>Adjust the sensitivity by turning the trimpot on the IR proximity sensor.</li>
<li>You&apos;re done.. Start sanitizing.</li>
<li>Show this thing to your friends.</li>
</ol></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Clone</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic++PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic  PLA                    </a>

                    Silver, White, Red
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Tight tolerances are needed for the pump body and rotor to ensure good seal.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/cEfmF2FTZ9k" frameborder="0" allowfullscreen></iframe></p>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/a1/e7/8b/aa/6e/Contactless_Hand_Sanitizer_Moment1.jpg"></p>
                <p class="detail-caption"><strong>Standing by..</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/ae/0b/a1/29/a9/Contactless_Hand_Sanitizer_Moment2.jpg"></p>
                <p class="detail-caption"><strong>Dispensing...</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/dd/65/70/80/98/IMG_20200702_183644.jpg"></p>
                <p class="detail-caption"><strong>Small DC motor, 6mm silicone tubing</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/0b/82/5f/b7/30/IMG_20200702_183838.jpg"></p>
                <p class="detail-caption"><strong>TIP125 PNP transistor, IR proximity sensor, USB cable</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/e5/57/79/16/6c/IMG_20200702_183439.jpg"></p>
                <p class="detail-caption"><strong>6x 693ZZ bearings, 2x M3x25mm cap screw, 3x M3x12mm button head screws, 4x M3x6mm countersunk screws</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/00/ea/0c/85/87/IMG_20200702_182707.jpg"></p>
                <p class="detail-caption"><strong>3D printed cover, rotor, and pump body with integrated mounting</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/1f/74/4a/d2/bf/IMG_20200702_184057.jpg"></p>
                <p class="detail-caption"><strong>DIY circuit board</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/2e/4e/eb/bb/4b/IMG_20200702_184413.jpg"></p>
                <p class="detail-caption"><strong>Final circuit</strong></p>
</body></html>

DIY Automatic Contactless Hand Sanitizer Dispenser

As new waves of Covid-19 spread continues, we decided to do something about it. Pooling all our talents together at RoboForce, we came up with this. Designed by our Techno Wizards, this hand sanitizer dispenser is easy to build, simple and reliable.

The goal of this design is to ensure that it is simple enough for the anyone to build and maintain while providing a platform for advanced users to buildon. Basically, anyone with a 3D printer and access to simple materials can build it.

STEP files are also included for any customization.

Materials needed:
1x Small DC motor
1x TIP125 PNP transistor
1x IR proximity sensor
1x USB cable (Only the 5V and GND wire is used)
6x 693ZZ bearings
2x M3x25mm cap screw
3x M3x12mm button head screws
4x M3x6mm countersunk screws
1x 3D printed cover
1x 3D printed rotor
1x 3D printed pump body with integrated mounting
6mm OD 4mm ID silicone tubing (Length depend on your bottle height. Minimum 200mm)

Assembly:
1. Stack 2 bearings and secure it to the rotor with button head screws. Repeat for all 3 sides.
2. Insert the silicone tubing into the pump body.
3. Push the silicone tube to the circular edge and insert the rotor.
4. Align and insert the motor shaft into the rotor. Do not push in all the way, leave a small gap between the rotor and pump body.
5, Secure the motor with cap screws.
6. Insert the IR proximity sensor into the slots and secure with countersunk screw.
7. Test the pump with water. It is self priming and can pump fluid even when the tube is full of air.
8. Secure the cover with countersunk screws.
9. Connect the transistor and the USB cable.
10. Get a PET soda bottle. Drill a 6mm hole on the cap.
11. Push the tube through and press fit the pump body on the bottle cap.
12. Adjust the sensitivity by turning the trimpot on the IR proximity sensor.
13. You're done.. Start sanitizing.
14. Show this thing to your friends.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is My personal design for a simple clean looking target for some good target practice use, the target is made to be move forward and backwards along with around after being hit. The infill is not super important, for most of the parts it only needs about 20% but the target needs at least 50% to prevent it from breaking quickly</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>X-Max Printer</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ANY+PLC&amp;tag=tv-auto-20" target="_blank">
                        ANY PLC                    </a>

                    ANY COLOR (something you will shoot at)
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>You will need supports for the rotating arm as its circular and with my experience 3d printing circles it will mess up quite easily. In order to put the parts together I used a 3d pen to &quot;weld&quot; the parts down Link here for the one I used.</p>
<p>(Link for the pen)</p>
<p><a rel="nofollow" href="https://www.amazon.com/MYNT3D-Professional-Printing-OLED-Display/dp/B01BLQ24IW/ref=pd_sbs_328_2/147-2369750-5915633?_encoding=UTF8&amp;pd_rd_i=B01BLQ24IW&amp;pd_rd_r=ac6de1d6-e86d-42ce-be95-5b3664a513cd&amp;pd_rd_w=jyBkS&amp;pd_rd_wg=EyyKe&amp;pf_rd_p=b65ee94e-1282-43fc-a8b1-8bf931f6dfab&amp;pf_rd_r=WWPA5ZS9MG1D8RSMTAWZ&amp;psc=1&amp;refRID=WWPA5ZS9MG1D8RSMTAWZ&amp;tag=tv-auto-20">https://www.amazon.com/MYNT3D-Professional-Printing-OLED-Display/dp/B01BLQ24IW/ref=pd_sbs_328_2/147-2369750-5915633?_encoding=UTF8&amp;pd_rd_i=B01BLQ24IW&amp;pd_rd_r=ac6de1d6-e86d-42ce-be95-5b3664a513cd&amp;pd_rd_w=jyBkS&amp;pd_rd_wg=EyyKe&amp;pf_rd_p=b65ee94e-1282-43fc-a8b1-8bf931f6dfab&amp;pf_rd_r=WWPA5ZS9MG1D8RSMTAWZ&amp;psc=1&amp;refRID=WWPA5ZS9MG1D8RSMTAWZ</a></p></div>
<h3 class="thing-component-header custom custom-section">Custom Section</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/a2/16/8c/5e/2d/Screen_Shot_2020-10-27_at_12.13.10_PM.png"></p>
                <p class="detail-caption"><strong>looks exactly as how you would put it together</strong></p>
</body></html>

Simple Rotating Airsoft Target

This is My personal design for a simple clean looking target for some good target practice use, the target is made to be move forward and backwards along with around after being hit. The infill is not super important, for most of the parts it only needs about 20% but the target needs at least 50% to prevent it from breaking quickly

Thingscanner

Some articles you might like