Open source meets the open road with the Open RC Accessory Design Contest, courtesy of Pinshape and Open RC Project founder Daniel Noree.

Enter the Pinshape Open RC Accessory Design Contest | All3DP

We all know about RC planes and cars, but what about some fun on the water? Let these 3D printed RC boats give you the watery thrills you're looking for!

3D Printed RC Boat: The Best Projects for Rocking Boats | All3DP

3D printers are even more fun when they're used for a wild hobby like RC cars. Dig into this collection of 3D printed RC car projects, ranging from simple to advanced.

3D Printed RC Car: 12 Cars to Feel Like an F1 Racer | All3DP

Have you ever wanted to fly an RC plane? What if you could make it yourself? All you need is a little time and a 3D printer. Check out this curated collection of 3D printed RC plane models, and pick your best fit!

3D Printed RC Plane: 10 Great Curated 3D Models | All3DP

Flying RC planes is a hobby as well-known for crashing as it is for fun. Sometimes, crashes can damage aircraft and leave pilots grounded. Check out these sources of 3D printed RC plane parts which will get you flying again in no time!

3D Printed RC Plane Parts – 7 Best Sources | All3DP

Available on Pinshape to download are blueprints for two 3D printed functional RC motorcycles, complete with a 3D printed moving rider.

3D Print Your Own Functional RC Motorcycles | All3DP

Love to fly planes but hate wasting money? This pilot shares 3D printable RC planes, complete with guides, videos and tips.

3D Printed RC Planes: Czech Pilot Shares Beautiful Designs | All3DP

For today's Weekend Project, we're looking at a 3D printed RC Airboat by maker Simon Sörensen. After some trial and error, the 3D printing enthusiast was able to create a functional boat design – and you can too!

[Project] Set Sail in This 3D Printed RC Airboat | All3DP

If you ever thought about a 3D printed RC plane, here‘s a real beauty for tinkerers: The Kraga Kodo has a wingspan of 1.6 meters and is ultra-light thanks to 3D printing.

Impressive 3D Printed RC Plane "Krada Kodo" Takes Off | All3DP

Afraid to lose your drone in bad weather or due to bad RC connection? Learn how to choose the best drone tracker to find your lost drone.

5 Best Drone Trackers to Find Lost Drones | All3DP

Create your own radio controlled 3D printed screw driver tank by following along with YouTuber Ivan Miranda's latest six part project.  

YouTuber 3D Prints and Tests a Screw Drive RC Tank | All3DP

With technology becoming increasingly cheaper in recent years, it's no surprise that you can now buy a drone for less than $15. The question is, is it worth the trouble, or should you keep saving for something a little more pricey? Today we'll find out, with a short review of the F36 Mini RC Drone.

F36 Mini RC Drone – Is this RTF Drone Worth $10.59? | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hi, my design thumb RC control. Radio Radiolink RC6GS, diameter wheel - 51mm.</p>
<p><a rel="nofollow" href="https://youtu.be/KOaEBRLhPC8">https://youtu.be/KOaEBRLhPC8</a>  </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>ZAV MAX Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=None+Pet-G&amp;tag=tv-auto-20" target="_blank">
                        None Pet-G                    </a>

                    Green
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Speed 60, nozzle 0.4mm</p></div>
</body></html>

Thumb control stick

Hi, my design thumb RC control. Radio Radiolink RC6GS, diameter wheel - 51mm.

https://youtu.be/KOaEBRLhPC8  

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>aileron de remplacement pour gt24b</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=votre+choix+TPU+%2F+PLA+%2F+PETG&amp;tag=tv-auto-20" target="_blank">
                        votre choix TPU / PLA / PETG                    </a>

                    Black
</body></html>

wing gt24b carisma

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><iframe width="560" height="315" src="https://www.youtube.com/embed/Z4qGSbimuNY" frameborder="0" allowfullscreen="allowfullscreen"></iframe>
<p>This model I got from the SpinTires Mudrunner game and edited to the 3D printing. It has 1/14 scale and RWD from JJRC Q60. Because I have a lot 4WD models, I wanted some RWD car to get more experience and difficulty on the ride.</p>
<p>Body printed from ABS and glued together with ABS juice. I made tyres from a silicone sealant using a 3d printed mold. It came pretty soft and heavy (because solid). I have recommended using a black aquarium sealant because it is black and has not shrink like a regular colourless sealant. Also you can printed tyres from some TPU flex plastic. I made rear wheels is wider by increasing Z scale up to 120% in the slicer for tyremold and wheel parts.</p>
<ul><li>
<p><a rel="nofollow" href="https://www.banggood.com/JJRC-Rear-Bridge-Axle-For-Q60-116-2_4G-Off-Road-Military-Trunk-Crawler-RC-Car-p-1339767.html?rmmds=search&amp;ID=223&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330921">JJRC Q60 rear axle</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/DC-3V-6V-DC-1120-Gear-Motor-TT-Motor-for-Arduino-Smart-Car-Robot-DIY-p-1260117.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330923">TT gearbox</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/Wltoys-P929-K989-1-or-28-Rc-Car-Spare-Parts-130-Brushed-Motor-No_K989-06-p-1337823.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330930">130 motor replacement</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/SG90-Mini-Gear-Micro-Servo-9g-For-RC-Airplane-Helicopter-p-1009914.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330917">SG90 plastic servo</a> or<br><a rel="nofollow" href="https://www.banggood.com/MG90S-Metal-Gear-RC-Micro-Servo-13_4g-for-ZOHD-Volantex-Airplane-RC-Helicopter-Car-Boat-Model-p-74870.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330920">MG90S Metal servo</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/TWO-TREES-10Pcs-Full-Metal-Flange-Ball-Bearing-608-or-623-or-624-or-625-or-626-or-688zz-Deep-Flanged-Pulley-Wheel-for-3D-Printer-p-1679183.html?rmmds=search&amp;ID=510170&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330913">623 bearings</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/300ML-Professional-Aquarium-Silicone-Sealant-Acid-Fish-Tank-121-Glass-Adhesive-p-1337385.html?rmmds=search&amp;ID=224&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1333864">Black silicone sealant</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/WPL-B-1-Damping-Metal-Sheet-4PCS-116-Military-Truck-RC-Crawler-Car-Parts-p-1227739.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1330937">Leaf springs</a></p>
</li>
<li>
<p><a rel="nofollow" href="https://www.banggood.com/20-or-30A-Mini-Brush-ESC-Brake-1-or-16-1-or-18-for-Climbing-RC-Car-Boat-Model-Spare-Parts-p-1243415.html?rmmds=search&amp;ID=519149&amp;cur_warehouse=USA&amp;p=J7171269288462016106&amp;custlinkid=1330932">ESC for brush motor</a></p>
</li>
<li><a rel="nofollow" href="https://www.banggood.com/Wltoys-7_4V-1100mAh-20C-2S-Lipo-Battery-JST-Plug-for-A949-A959-A969-A979-1-or-18-RC-Vehicles-p-1557838.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1333837">2S battery</a></li>
</ul><p>You can use any 2 channel RC transmitter. I have used <a rel="nofollow" href="https://www.banggood.com/Flysky-FS-GT3B-2_4G-3CH-Transmitter-With-Receiver-With-Fail-Safe-p-84105.html?rmmds=search&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1333832">Flysky FS-GT3B</a> but also tried cheaper and more functionaled <a rel="nofollow" href="https://www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?rmmds=search&amp;ID=229&amp;cur_warehouse=CN&amp;p=J7171269288462016106&amp;custlinkid=1333833">DumboRC X6</a></p>
<p>There is an old Chevy truck with rear drive and open diff. It run on the yellow TT gearbox.Original motor quickly died and replaced. Also I removed one gear step to increase speed.</p>
<p>623 bearing put inside the hub and may glued carefully if it loose. Hex axle screwed through bearing with M3 screw. Cup part fixed with a screw on a gearbox shaft and a driveshaft&apos;s end mounted with M2 screw &amp; nut inside a cup. From other end you can used a metal pin from old JJRC driveshaft or M2 screw too.</p>
<p>Leaf spring puts on chassis with M2 screws and folded ends hold on chassis by a piece of paper clip wire.This spring&apos;s end must be slide under wire when spring is damping.</p>
<p><a rel="nofollow" href="https://www.youtube.com/watch?v=Z4qGSbimuNY">https://www.youtube.com/watch?v=Z4qGSbimuNY</a></p></div>
<h3 class="thing-component-header custom gearbox-modification">Gearbox modification</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/fe/81/0f/79/fd/IMG_20201101_122249.jpg"></p>
                <p class="detail-caption"><strong>Gearbox modification</strong></p>
<h3 class="thing-component-header custom chassis">Chassis</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/89/1f/aa/0c/0f/chassis.jpg"></p>
</body></html>

RC Chevrolet 3100 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Hex Piniontower V1</h3>
<p>This Thing holds 9 Piniongears in Place.<br>
To finish it you will have to cut treats first and then mount 9x M3x10mm Bold-Head Screws. </p>
<p>Works great with my Hex Toolstand: <a rel="nofollow" href="/thing:4610581">https://www.thingiverse.com/thing:4610581</a></p>
<p>Hex Tools <a rel="nofollow" href="https://amzn.to/3ocIE3i?tag=tv-auto-20">https://amzn.to/3ocIE3i</a></p>
<p>Nut Tools <a rel="nofollow" href="https://amzn.to/2Hpc1ye?tag=tv-auto-20">https://amzn.to/2Hpc1ye</a></p>
<p>Have Fun<br><a rel="nofollow" href="/opulius/designs">https://www.thingiverse.com/opulius/designs</a></p>
<p>And if you like my design please don&apos;t forget to share in instagram #opulius :-) </p>
<p>INSTAGRAM<br><a rel="nofollow" href="https://www.instagram.com/opulius/">https://www.instagram.com/opulius/</a></p></div>
</body></html>

Hex Piniontower V1

#Hex Piniontower V1

This Thing holds 9 Piniongears in Place. 
To finish it you will have to cut treats first and then mount 9x M3x10mm Bold-Head Screws. 

Works great with my Hex Toolstand: https://www.thingiverse.com/thing:4610581



Hex Tools https://amzn.to/3ocIE3i

Nut Tools https://amzn.to/2Hpc1ye





Have Fun 
https://www.thingiverse.com/opulius/designs

And if you like my design please don't forget to share in instagram #opulius :-) 


INSTAGRAM
https://www.instagram.com/opulius/




 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Here is a sleeper spoiler for Grand Hauler (King Hauler and Globeliner) by Tamiya. I designed it so the parts be glued together by your wish. As a hinges I used 1.75 filament parts, melted at the ends.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Suntop+PLA&amp;tag=tv-auto-20" target="_blank">
                        Suntop PLA                    </a>

                    White
</body></html>

1:14 Sleeper Spoiler for Tamiya Grand Hauler

Here is a sleeper spoiler for Grand Hauler (King Hauler and Globeliner) by Tamiya. I designed it so the parts be glued together by your wish. As a hinges I used 1.75 filament parts, melted at the ends.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>These are lowrider style rear window plaques, designed to fit the Redcat Sixty-Four.</p>
<p>These were all printed at 0.15 mm thickness, though resolution is not as critical as the width of the nozzle. These prints were done on a Prusa i3 mk3s with a 0.40 mm nozzle, a smaller nozzle would look even better, and an SLS print would be ideal!</p>
<p>The base gets glued or double sided taped to the rear deck of your Sixty-Four interior, then you can swap out the plaque as you wish!</p>
<p>Enjoy!</p>
<h5>Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).</h5>
<p>We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles. </p>
<blockquote>
<p>In keeping with the non-commercial clause of this license, if you produce this part you may not receive compensation in excess of your material costs, plus your shipping costs.</p>
</blockquote></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Doesn%27t+matter+Whatever+you+like&amp;tag=tv-auto-20" target="_blank">
                        Doesn&apos;t matter Whatever you like                    </a>

                    black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printing in black is pretty crucial to making the chrome stand out after you paint the parts. PLA is probably not the best choice for printing if you drive the car a lot... the motor can get hot enough to raise the temperature in the interior to the point of softening PLA.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-title"><strong>Finishing</strong></p>
                <div><p>We recommend that you sand the face of the print with some fine sand paper before painting with a chrome paint pen. We highly recommend the Molotow Liquid Chrome pens! All of the chrome on the prints in the pictures has at least two coats!</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/bb/4c/a2/a1/83/Sixty_Four_Printed.jpg"></p>
                <p class="detail-caption"><strong>Before</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/be/3e/e7/68/90/Sixty_Four_Finished.jpg"></p>
                <p class="detail-caption"><strong>After</strong></p>
</body></html>

Lowrider Rear Window Plaques

These are lowrider style rear window plaques, designed to fit the Redcat Sixty-Four.

These were all printed at 0.15 mm thickness, though resolution is not as critical as the width of the nozzle. These prints were done on a Prusa i3 mk3s with a 0.40 mm nozzle, a smaller nozzle would look even better, and an SLS print would be ideal!

The base gets glued or double sided taped to the rear deck of your Sixty-Four interior, then you can swap out the plaque as you wish!

Enjoy!

#####Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0). 

We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles. 

>In keeping with the non-commercial clause of this license, if you produce this part you may not receive compensation in excess of your material costs, plus your shipping costs.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a faux top cover to complete the look for people who would like to modify their Sixty-Four by removing the roof!</p>
<p>Removing the roof is farily simple, we did it using a razor knife and following the chrome trim lines all around the top. Once the roof is removed, if you like, you can glue or tape the interior  to the rest of the body, removing the need for the interior mounts on the chassis.</p>
<p>This part covers the seam between the rear section of the interior and the body. We affixed it to the body with hot glue, but there are many methods that work well.  You will need to print with supports, as the underside is contoured to match the interior.</p>
<p>We recommend sanding and painting this piece, or even covering it with your choice of fabric to make it even more realistic!</p>
<h5>Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).</h5>
<p>We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles. </p>
<blockquote>
<p>In keeping with the non-commercial clause of this license, if you produce this part you may not receive compensation in excess of your material costs, plus your shipping costs.</p>
</blockquote></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSun+PLA&amp;tag=tv-auto-20" target="_blank">
                        eSun PLA                    </a>

                    Black
</body></html>

SixtyFour Faux Drop Top Cover

This is a faux top cover to complete the look for people who would like to modify their Sixty-Four by removing the roof!

Removing the roof is farily simple, we did it using a razor knife and following the chrome trim lines all around the top. Once the roof is removed, if you like, you can glue or tape the interior  to the rest of the body, removing the need for the interior mounts on the chassis.

This part covers the seam between the rear section of the interior and the body. We affixed it to the body with hot glue, but there are many methods that work well.  You will need to print with supports, as the underside is contoured to match the interior.

We recommend sanding and painting this piece, or even covering it with your choice of fabric to make it even more realistic!

#####Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0). 

We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles. 

>In keeping with the non-commercial clause of this license, if you produce this part you may not receive compensation in excess of your material costs, plus your shipping costs.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>remixed alexbys bed pieces into a full bed</p></div>
</body></html>

Dodge Ram Late 80s combined bed

remixed alexbys bed pieces into a full bed


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Propeller Designed to be printed, it is in developement phase, tested on proper propeller test bench and is capable of 20 grams of thrust at 1500 rpm, 690 grams @ 12.000 rpm,  other speeds data incoming. </p>
<p>If you want to support the drone/airplane developement project you can buy the mode at just 2$ on turboSquid!  :: <a rel="nofollow" href="https://www.turbosquid.com/it/FullPreview/Index.cfm/ID/1643125">https://www.turbosquid.com/it/FullPreview/Index.cfm/ID/1643125</a> ::</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>70-100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PET-G&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PET-G                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>To be printed horizontally with supports in order to have layers descrbing the airfoil profile </p></div>
</body></html>

Propeller to be 3D Printed 

Propeller Designed to be printed, it is in developement phase, tested on proper propeller test bench and is capable of 20 grams of thrust at 1500 rpm, 690 grams @ 12.000 rpm,  other speeds data incoming. 

If you want to support the drone/airplane developement project you can buy the mode at just 2$ on turboSquid!  :: https://www.turbosquid.com/it/FullPreview/Index.cfm/ID/1643125 ::

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>PhonieBox made for my daughter,</p>
<p>wanted to improve the prototype but my daughter was so happy with it that i left everything as it is. Just replaced Raspberry 1 with a Zero.</p>
<p>Used Hardware</p>
<p>Raspberry Pi Zero WH (mounted with Battery Shield 2 cells Zero Aufsatz.stl onto battery shield...)<br>
Raspberry 1, or greater, mounted on the backplate</p>
<p>2 * JBL Clip3</p>
<p><a rel="nofollow" href="https://de.aliexpress.com/item/4000117965509.html">https://de.aliexpress.com/item/4000117965509.html</a>  100 RFID cards<br><a rel="nofollow" href="https://de.aliexpress.com/item/33026239591.html">https://de.aliexpress.com/item/33026239591.html</a> Magnetic Micro USB...<br><a rel="nofollow" href="https://de.aliexpress.com/item/32855791603.html">https://de.aliexpress.com/item/32855791603.html</a> MicroSD<br><a rel="nofollow" href="https://de.aliexpress.com/item/4000870234968.html">https://de.aliexpress.com/item/4000870234968.html</a> 18650 BatteryShield<br><a rel="nofollow" href="https://de.aliexpress.com/item/32965284265.html">https://de.aliexpress.com/item/32965284265.html</a> 5Pcs 4pin Momentary Type 16MM Round reset Push Button Switch 3A/250VAC<br><a rel="nofollow" href="https://amzn.to/2TWDWsJ?tag=tv-auto-20">https://amzn.to/2TWDWsJ</a> RFID Kit RC522 Reader<br><a rel="nofollow" href="https://amzn.to/35Xdq7M?tag=tv-auto-20">https://amzn.to/35Xdq7M</a> DeLock Kabel USB 2.0 Micro-B Buchse zum Einbau &gt; USB 2.0 Micro-B Stecker 25 cm<br><a rel="nofollow" href="https://amzn.to/3mAjz0C?tag=tv-auto-20">https://amzn.to/3mAjz0C</a> AZDelivery 3 x Jumper Wire Kabel Set &#xE0; 120 St&#xFC;ck je 20 cm M2M/ F2M / F2F<br><a rel="nofollow" href="https://amzn.to/31YxVQz?tag=tv-auto-20">https://amzn.to/31YxVQz</a> 5 St&#xFC;ck ANGEEK Mini PAM8403 Stereo Verst&#xE4;rker 5V 3W+3W Handy Digital Power Amp Modul</p>
<p>Only the body needs support touching build plate, everything else can be printed without support. Just rotate everything flat.</p>
<p>Added Fusion 360 file.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=extrudr+PETG%2FPLA&amp;tag=tv-auto-20" target="_blank">
                        extrudr PETG/PLA                    </a>

                    Whatever
</body></html>

PhonieBox with mount for Raspberry Zero,1,2,.. RC522, JBL Clip 3, Battery Shield

PhonieBox made for my daughter,

wanted to improve the prototype but my daughter was so happy with it that i left everything as it is. Just replaced Raspberry 1 with a Zero.


Used Hardware

Raspberry Pi Zero WH (mounted with Battery Shield 2 cells Zero Aufsatz.stl onto battery shield...)
Raspberry 1, or greater, mounted on the backplate

2 * JBL Clip3

https://de.aliexpress.com/item/4000117965509.html  100 RFID cards
https://de.aliexpress.com/item/33026239591.html Magnetic Micro USB... 
https://de.aliexpress.com/item/32855791603.html MicroSD
https://de.aliexpress.com/item/4000870234968.html 18650 BatteryShield
https://de.aliexpress.com/item/32965284265.html 5Pcs 4pin Momentary Type 16MM Round reset Push Button Switch 3A/250VAC
https://amzn.to/2TWDWsJ RFID Kit RC522 Reader 
https://amzn.to/35Xdq7M DeLock Kabel USB 2.0 Micro-B Buchse zum Einbau > USB 2.0 Micro-B Stecker 25 cm
https://amzn.to/3mAjz0C AZDelivery 3 x Jumper Wire Kabel Set à 120 Stück je 20 cm M2M/ F2M / F2F
https://amzn.to/31YxVQz 5 Stück ANGEEK Mini PAM8403 Stereo Verstärker 5V 3W+3W Handy Digital Power Amp Modul

Only the body needs support touching build plate, everything else can be printed without support. Just rotate everything flat.


Added Fusion 360 file.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>L&#xFC;fterhalterung f&#xFC;r 3650/3660 brushless Motoren f&#xFC;r einen 40mm L&#xFC;fter.<br>
Befestigung mit zwei Kabelbindern.<br>
Das Bauteil wird zweimal ben&#xF6;tigt</p>
<h3>Bitte postet Eure Makes und kommentier wie es Euch gef&#xE4;llt oder was ich verbessern sollte.</h3>
<p>Fan bracket for 3650/3660 brushless motors for a 40mm fan.<br>
Mounting with two cable ties.<br>
The component is required twice</p>
<p>Please post your makes and comment how you like it or what I should improve.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>
</body></html>

Fan Mount Brushless Motor 3650/366p, Brushed 540/550 40mm Fan

Lüfterhalterung für 3650/3660 brushless Motoren für einen 40mm Lüfter.
Befestigung mit zwei Kabelbindern.
Das Bauteil wird zweimal benötigt

Bitte postet Eure Makes und kommentier wie es Euch gefällt oder was ich verbessern sollte.
--------------------------------------

Fan bracket for 3650/3660 brushless motors for a 40mm fan.
Mounting with two cable ties.
The component is required twice

Please post your makes and comment how you like it or what I should improve.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>J&apos;ai trouv&#xE9; le fichier &#xE0; GRABCAD.<br><a rel="nofollow" href="https://grabcad.com/library/os-25-sf-abf-engine-1">https://grabcad.com/library/os-25-sf-abf-engine-1</a><br>
J&apos;ai divis&#xE9; le moteur en deux pour augmenter l&apos;imprimabilit&#xE9;.<br>
Die eigentliche CAD-Datei habe ich auf GRABCAD gefunden (nicht von mir). Ich habe den Motor in zwei H&#xE4;lften aufgeteilt umd die Druckbarkeit zu verbessern.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=FILAMENTWORLD+PLA&amp;tag=tv-auto-20" target="_blank">
                        FILAMENTWORLD PLA                    </a>
</body></html>

O.S.25 RC Engine

J'ai trouvé le fichier à GRABCAD.
https://grabcad.com/library/os-25-sf-abf-engine-1 
J'ai divisé le moteur en deux pour augmenter l'imprimabilité.
Die eigentliche CAD-Datei habe ich auf GRABCAD gefunden (nicht von mir). Ich habe den Motor in zwei Hälften aufgeteilt umd die Druckbarkeit zu verbessern.


Thingscanner

Some articles you might like