In 3D printed cars usually the chassis is 3D printed. A German company went a step further: they 3d printed a functional cylinder block.

German Prototyper 3D Prints Motor Block From Aluminum | All3DP

We come back with fresh news about 3D printed jewelry! Find your next 3D printed rings and 3D printed bracelets to print or purchase!

20 Best 3D Printed Rings and 3D Printed Bracelets | All3DP

Properly designed, a 3D printed rocket boasts efficiency and affordability. Discover the latest advancements in 3D printed rockets!

3D Printed Rocket: The Latest Advancements | All3DP

A series of beautifully organic 3D printed ceramics -- with intentional imperfections -- are challenging the way we see 3D printed art.

3D Printed Ceramics with Intentional Imperfections | All3DP

Design student Maxime Loiseau created 3D printed headphones that transmit sound through printed electronics. Oh, and they also look great.

3D Printed Headphones: Ultra-Minimal, Looking Great | All3DP

"Ardu McDuino" is an Arduino-powered, 3D printed bagpipe chanter robot. We’ve seen great 3D printed instruments... this is just unbelievable.

3D Printed Robot "Ardu McDuino" Plays The Bagpipe Chanter | All3DP

Available on Pinshape to download are blueprints for two 3D printed functional RC motorcycles, complete with a 3D printed moving rider.

3D Print Your Own Functional RC Motorcycles | All3DP

We've already printed plastic, concrete, clothes and food. Now, MIT has developed a process for 3D printed glass — and it's gorgeous.

3D Printed Glass developed by MIT is Mesmerizing | All3DP

Soccer player Robert Lewandowski is scanned and printed as 10 feet tall statue, potentially breaks records for tallest 3D printed object.

3D Printed Robert Lewandowski to Break Guinness World Record? | All3DP

A museum in Belgium has a massive 3D printed replica of the Stargate "interplanetary transport", printed and assembled in 1,000 hours.

Lifesize Stargate 3D Printed in 1,000 Hours | All3DP

The perfect jacket isn't hand-tailored. It's printed. This 3D printed seamless jacket is just what the modern closet is missing.

This 3D Printed Seamless Jacket Looks Totally Handsome | All3DP

Bridges are fascinating, especially when they're 3D printed! Check out the most impressive 3D printed bridge projects we've seen so far.

The Most Striking 3D Printed Bridge Projects | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>3D PRINT DESIGN OF MY VERSION OF THE LEO CELESTIAL KEY USED BY LUCY HEARTFILIA IN FAIRYTAIL.</p>
<p>MODEL COMES IN 2 PARTS TO BETTER ATTACH THE PIECES TOGETHER.</p>
<p>PLEASE LET ME KNOW WHAT YOU THINK? COMMENT IF ANYTHING SHOULD BE EDITED? COMMENT IF YOU WOULD LIKE TO SEE MORE?</p>
<p>BE SURE TO VISIT MY CGTRADER PAGE FOR MORE EXCLUSIVE CONTENT!</p>
<p>W17ARD</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>XYZprinting</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>da Vinci Jr. 1.0 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=FILAMENT+FACTORY+PLA&amp;tag=tv-auto-20" target="_blank">
                        FILAMENT FACTORY PLA                    </a>

                    BLUE
</body></html>

LEO CELESTIAL KEY FAIRYTAIL

3D PRINT DESIGN OF MY VERSION OF THE LEO CELESTIAL KEY USED BY LUCY HEARTFILIA IN FAIRYTAIL.

MODEL COMES IN 2 PARTS TO BETTER ATTACH THE PIECES TOGETHER.

PLEASE LET ME KNOW WHAT YOU THINK? COMMENT IF ANYTHING SHOULD BE EDITED? COMMENT IF YOU WOULD LIKE TO SEE MORE?

BE SURE TO VISIT MY CGTRADER PAGE FOR MORE EXCLUSIVE CONTENT!

W17ARD

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a playable ukulele I&apos;ve designed. I call Ukulelin (Ukulele + Violin).</p>
<p>This contains Body(whole, upper and lower) , Neck(upper, lower and joint) and Pegs (separated as five parts).<br>
This doesn&apos;t contain strings, and these parts should be glued, so you need strings of an Ukulele and super glue.</p>
<p>I highly recommend that you purchase pegs, because ready-made pegs are stronger and more precise than these.<br>
If you print these pegs, you should lubricate with silicone grease or something like that.<br>
I uploaded a movie of how I glued parts of pegs.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Creality+pla&amp;tag=tv-auto-20" target="_blank">
                        Creality pla                    </a>

                    Yellow
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used PLA for printing body and neck and ABS for printing pegs.</p>
<p>My Print Settings of body is here, but those of neck are &quot; Resolution:0.2 / Infill:30% / Wall_counts:5 &quot; those of pegs are &quot; Resolution:0.1 / Infill:30% / Wall_counts:4 &quot;</p>
<p>I recommend that you print these as strong (heavy) as possible.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-video"><iframe src="//player.vimeo.com/video/474176311" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe></p>
</body></html>

Ukulele & pegs - Ukulelin Project

This is a playable ukulele I've designed. I call Ukulelin (Ukulele + Violin).

This contains Body(whole, upper and lower) , Neck(upper, lower and joint) and Pegs (separated as five parts).
This doesn't contain strings, and these parts should be glued, so you need strings of an Ukulele and super glue.

I highly recommend that you purchase pegs, because ready-made pegs are stronger and more precise than these.
If you print these pegs, you should lubricate with silicone grease or something like that.
I uploaded a movie of how I glued parts of pegs.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>3D PRINT DESIGN OF MY VERSION OF THE SAGITTARIUS CELESTIAL KEY USED BY LUCY HEARTFILIA IN FAIRYTAIL.</p>
<p>MODEL COMES IN 2 PARTS TO BETTER ATTACH THE PIECES TOGETHER.</p>
<p>PLEASE LET ME KNOW WHAT YOU THINK? COMMENT IF ANYTHING SHOULD BE EDITED? COMMENT IF YOU WOULD LIKE TO SEE MORE?</p>
<p>BE SURE TO VISIT MY CGTRADER PAGE FOR MORE EXCLUSIVE CONTENT!</p>
<p>W17ARD</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>XYZprinting</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>da Vinci Jr. 1.0 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=FILAMENT+FACTORY+PLA&amp;tag=tv-auto-20" target="_blank">
                        FILAMENT FACTORY PLA                    </a>

                    BLUE
</body></html>

SAGITTARIUS CELESTIAL KEY FAIRYTAIL

3D PRINT DESIGN OF MY VERSION OF THE SAGITTARIUS CELESTIAL KEY USED BY LUCY HEARTFILIA IN FAIRYTAIL.

MODEL COMES IN 2 PARTS TO BETTER ATTACH THE PIECES TOGETHER.

PLEASE LET ME KNOW WHAT YOU THINK? COMMENT IF ANYTHING SHOULD BE EDITED? COMMENT IF YOU WOULD LIKE TO SEE MORE?

BE SURE TO VISIT MY CGTRADER PAGE FOR MORE EXCLUSIVE CONTENT!

W17ARD

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Building / Desinign / Testing video: <a rel="nofollow" href="https://youtu.be/zamc_PCBvOA">https://youtu.be/zamc_PCBvOA</a></p>
<p>Building a planetary gearbox is pretty simple, but design and printing one, can be a bit painful. This video is more tutorial than my usual project videos. Planetary gearbox bodies are printed out with ABS but for gears, I did use PET-G.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+ABS+and+PET-G&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex ABS and PET-G                    </a>

                    Black and Red
</body></html>

3D Printed Universal Planetary Gearbox

Building / Desinign / Testing video: https://youtu.be/zamc_PCBvOA

Building a planetary gearbox is pretty simple, but design and printing one, can be a bit painful. This video is more tutorial than my usual project videos. Planetary gearbox bodies are printed out with ABS but for gears, I did use PET-G.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Improved Travelele electric ukulele parts from <a rel="nofollow" href="/thing:2786864">Travelele by avocado_boat</a></p>
<p><strong>Update 2020-11-10</strong> Added improved rod and nut v2.</p>
<p><strong>Nut</strong> - triangle cut and adjusted height. String spacing 9mm.<br><strong>Nut v2</strong> - same as above, but 0.5mm lower.<br><strong>Bridge</strong> - pincher slots with slope. String spacing 14mm.</p>
<p>Nut and bridge improvement removes the clash and makes the sound much cleaner, especially on 3rd (C) string. Dot-marked side under the 1st string. As the slots are in different sizes, use left- or right-handed bridge accordingly. The nut can be turned around for opposite handling. They are for High G strings. I can make them for Low G if anyone requests it.</p>
<p><strong>Body</strong> - redesigned the body for geared tuners and pickup endpin. String guide slots replaced to the single string tunnels. Use geared tuners with ferrules for guitar, as they have a longer shaft. I didn&apos;t put holes for pegs&apos; screws, as they come with different patterns and sizes. So just drill few millimetres and let the screw bite the rest. Just remember to print with at least 5 perimeters/walls. Mirror it in the slicer if you want the endpin to be on the other side.</p>
<p><strong>Neck</strong> - no improvements, use the original one.<br><strong>Truss rod</strong> - Changed Y-end angle for better pivoting without bending the neck. Also, 2mm shorter than the original. This allows lowering the strings more.</p>
<p>Parts needed:</p>
<ul><li>4pcs geared tuning pegs for guitar. With long shaft, where the string hole is at 22-23mm.</li>
<li>4pcs ferrules </li>
<li>Endpin jack, diam. 12mm</li>
<li>Piezo-pickup 40mm</li>
<li>18mm M3 bolt and nut for locking the jack</li>
<li>25mm M4 bolt and nut</li>
</ul><p>See photos for assembly :)</p></div>
</body></html>

Improved Travelele with pickup

Improved Travelele electric ukulele parts from [Travelele by avocado_boat](https://www.thingiverse.com/thing:2786864)

**Update 2020-11-10** Added improved rod and nut v2.

**Nut** - triangle cut and adjusted height. String spacing 9mm.
**Nut v2** - same as above, but 0.5mm lower.
**Bridge** - pincher slots with slope. String spacing 14mm.

Nut and bridge improvement removes the clash and makes the sound much cleaner, especially on 3rd (C) string. Dot-marked side under the 1st string. As the slots are in different sizes, use left- or right-handed bridge accordingly. The nut can be turned around for opposite handling. They are for High G strings. I can make them for Low G if anyone requests it.

**Body** - redesigned the body for geared tuners and pickup endpin. String guide slots replaced to the single string tunnels. Use geared tuners with ferrules for guitar, as they have a longer shaft. I didn't put holes for pegs' screws, as they come with different patterns and sizes. So just drill few millimetres and let the screw bite the rest. Just remember to print with at least 5 perimeters/walls. Mirror it in the slicer if you want the endpin to be on the other side.

**Neck** - no improvements, use the original one.
**Truss rod** - Changed Y-end angle for better pivoting without bending the neck. Also, 2mm shorter than the original. This allows lowering the strings more.

Parts needed:
 - 4pcs geared tuning pegs for guitar. With long shaft, where the string hole is at 22-23mm.
 - 4pcs ferrules 
 - Endpin jack, diam. 12mm
 - Piezo-pickup 40mm
 - 18mm M3 bolt and nut for locking the jack
 - 25mm M4 bolt and nut

See photos for assembly :)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Artillery Sidewinder LED holder with multiple options </p>
<p>Tested on my X1 with SKR 1.4 turbo (+ DCDC module)</p>
<p>Led are connected using the X end stop JST (I use the TMC2209 sensorless)</p>
<p>The SKR can menage up to 30 LEDs, but 20-25 are the best option (my configuration uses 24 GRB leds)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Sidewinder X1 (SKR 1.4 T, 2209, BMG + Mosquito)</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Fillamentum+CPE+HG100&amp;tag=tv-auto-20" target="_blank">
                        Fillamentum CPE HG100                    </a>

                    Red Hood Transparent
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print Speed of 65 mm/s - Inner 58 - Outer 52 - First Layer 15 mm/s - cooling off</p></div>
</body></html>

Artillery Sidewinder X1 Neopixel / LED holder

Artillery Sidewinder LED holder with multiple options 

Tested on my X1 with SKR 1.4 turbo (+ DCDC module)

Led are connected using the X end stop JST (I use the TMC2209 sensorless)

The SKR can menage up to 30 LEDs, but 20-25 are the best option (my configuration uses 24 GRB leds)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>this is a modified wheel adaptor that will allow the use of the 3DSets Printed wheels with the RC Trailer. i made a mashup of the axle from 3Dsets and the original wheel mount from the trailer.</p>
<p>this will need supports to print successfully.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ESUN+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        ESUN PLA+                    </a>

                    Black
</body></html>

3DSets Printed wheel adaptor for RC trailer

this is a modified wheel adaptor that will allow the use of the 3DSets Printed wheels with the RC Trailer. i made a mashup of the axle from 3Dsets and the original wheel mount from the trailer.

this will need supports to print successfully.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Couldnt take off from rough field with standard wheels, didnt want to wait for shipping so I made some in Fusion360 that fit the Eclipson hubs. </p>
<p>Two sections that get glued together after putting on the hub or directly glued together with the second file. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Up</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2BpkPM8?tag=tv-auto-20" target="_blank">Up Plus</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>13%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Flexible+TPU+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Flexible TPU TPU                     </a>

                    blue
</body></html>

Eclipson Airplanes - Fat Grass Wheel - Model D - 3D Printed Plane

Couldnt take off from rough field with standard wheels, didnt want to wait for shipping so I made some in Fusion360 that fit the Eclipson hubs. 

Two sections that get glued together after putting on the hub or directly glued together with the second file. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Lamp shade with 40mm (ikea size) top size</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">i3 MK3</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Prusament+PLA+or+wood&amp;tag=tv-auto-20" target="_blank">
                        Prusament PLA or wood                    </a>

                    Black
</body></html>

Lamp shade 40mm CNC or 3D printed

Lamp shade with 40mm (ikea size) top size

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hey!!!</p>
<p>This is a Game Boy Colour stand that i designed to proudly display my handheld.</p>
<p>Printer: Creality Ender 3<br>
Supports: None<br>
Nozzle: 0.4 @ 0.2mm layer height<br>
Infill: 15-25%</p>
<p>I used a Brim to print mine, but i think you can get away with just using a shirt (Check your bed level.)</p>
<p>If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D</p>
<p>Happy printing.</p>
<p>Estikuma</p>
<p>Instagram: <a rel="nofollow" href="https://www.instagram.com/estikuma/">https://www.instagram.com/estikuma/</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=N%2FA+PLA&amp;tag=tv-auto-20" target="_blank">
                        N/A PLA                    </a>

                    Grey
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>N/A</p></div>
</body></html>

Game Boy Colour Stand

Hey!!!

This is a Game Boy Colour stand that i designed to proudly display my handheld.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

I used a Brim to print mine, but i think you can get away with just using a shirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

Instagram: https://www.instagram.com/estikuma/

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Easy to print wallet / card holder for up to 10 credit card sized cards!</p>
<p>You&apos;ll need:</p>
<p>5 Printed Parts:</p>
<ul><li>Front- and Backplate</li>
<li>both Framepieces</li>
<li>
<p>closing tab</p>
</li>
<li>6 M2 by 12mm screws</li>
<li>
<p>6 M2 nuts</p>
</li>
<li>elastic stip (19mm)</li>
</ul><p>I&apos;ll upload the step and inventor files to GrabCAD if you want to modify / rebuilt them for non metric screws and other sized elastic strip.</p>
<p><a rel="nofollow" href="https://grabcad.com/library/wallet-card-holder-1">https://grabcad.com/library/wallet-card-holder-1</a></p>
<p>Printed on a Original Prusa Mini.<br>
Settings:</p>
<ul><li>no supports </li>
</ul><p>Front- and backplate:</p>
<ul><li>100% Infill</li>
<li>ATTENTION: Bridging neccesary</li>
</ul><p>Frame:</p>
<ul><li>0% Infill </li>
<li>no Bottom or top layers</li>
<li>4 Parimiters </li>
<li>0.07 mm layer used to make them as smoth as possible for painting (painting not neccesary)</li>
</ul><p>Tab:</p>
<ul><li>Brim recommendet</li>
</ul><p>To make it RFID shielded, I just glued a piece of tinfoil and paper to both halves.</p></div>
</body></html>

Wallet / card holder

Easy to print wallet / card holder for up to 10 credit card sized cards!

You'll need:

5 Printed Parts:
- Front- and Backplate
- both Framepieces
- closing tab

- 6 M2 by 12mm screws
- 6 M2 nuts

- elastic stip (19mm)

I'll upload the step and inventor files to GrabCAD if you want to modify / rebuilt them for non metric screws and other sized elastic strip.

https://grabcad.com/library/wallet-card-holder-1


Printed on a Original Prusa Mini.
Settings:

- no supports 

Front- and backplate:
- 100% Infill
- ATTENTION: Bridging neccesary

Frame:
- 0% Infill 
- no Bottom or top layers
- 4 Parimiters 
- 0.07 mm layer used to make them as smoth as possible for painting (painting not neccesary)

Tab:
- Brim recommendet

To make it RFID shielded, I just glued a piece of tinfoil and paper to both halves.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Paper cutter for A4 papers, maximum cutting width is 248mm<br>
require 6x M3x30mm screws<br>
2x M3x5mm countersunk head screws<br>
small blade</p>
<p>Possible to download through <a rel="nofollow" href="https://cults3d.com/en/3d-model/tool/a4-paper-cutter">https://cults3d.com/en/3d-model/tool/a4-paper-cutter</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Prusament+PLA&amp;tag=tv-auto-20" target="_blank">
                        Prusament PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Prusament PLA Royal Blue and Jet Black for printing this paper cutter.<br>
Total saving is more than 70% of the paper cutter in stores</p></div>
</body></html>

Paper Cutter

Paper cutter for A4 papers, maximum cutting width is 248mm 
require 6x M3x30mm screws
            2x M3x5mm countersunk head screws
            small blade

Possible to download through https://cults3d.com/en/3d-model/tool/a4-paper-cutter

Thingscanner

Some articles you might like