Zortrax releases three new materials for the Inventure 3D printer – durable Z-ULTRAT Plus, Z-SEMIFLEX, and Z-SUPPORT Plus.

New Zortrax Materials Expand Production Possibilities of Inventure 3D Printer | All3DP

À la recherche de projets Arduino originaux ? Découvrez les meilleures inventions pour tous les niveaux, des plus accessibles aux plus sophistiqués.

Les 35 meilleurs projets Arduino en 2021 | All3DP

Le nouveau Raspberry Pi 4 vend du rêve : plus de RAM, un processeur plus rapide, et une connexion, au choix, via USB 3.0, en wifi embarqué ou Bluetooth 5.0. Et si l’on étudiait d’un peu plus près toutes ces caractéristiques ?

Raspberry Pi 4 : toutes les infos sur ce nouveau micro-ordinateur ! | All3DP

Volume d’impression plus généreux, caractéristiques techniques améliorées : la Creality Ender 5 Plus promet de surpasser sa petite sœur, la Ender 5. Découvrons-la ensemble.

Creality Ender 5 Plus – Caractéristiques et points-clés | All3DP

Although a community favorite, the Ender 5 Plus has room for improvement. Read on for a breakdown of the best Ender 5 Plus upgrades and mods.

2021 Best Creality Ender 5 Plus Upgrades & Mods | All3DP

A high-resolution DLP 3D printer under $700? That’s affordable! Let's review the specs of the Wanhao Duplicator 7 Plus (also known as Wanhao D7 Plus).

Wanhao Duplicator 7 (D7) Plus 3D Printer – Review the Specs | All3DP

While we love the Ender 5 Plus, we love quiet, too! Learn how to upgrade your Ender 5 Plus with a silent board for quieter 3D printing.

Ender 5 Plus Silent Board: How to Install It | All3DP

The Anet A8 Plus 3D printer is an upgraded version of the tremendously popular Anet A8 and features a larger build volume plus a refined frame design. Read on for our hands-on review.

Anet A8 Plus Review: Hands On | All3DP

The Raise3D N2 Plus is our pick for the "Best Large Format 3D Printer of Summer 2018". Review the specs here.

Raise3D N2 Plus: Review the Specs | All3DP

Zortrax M200 Plus 3D Printer : Review all the available specifications and features. Find out the maximum build volume, resolution, connectivity options, and more.

Zortrax M200 Plus: Review the Specs | All3DP

Vous ne savez pas quel filament 3D utiliser ? Découvrez les 25 filaments pour imprimante 3D les plus populaires. Du filament PLA classique aux matériaux les plus exotiques, notre guide vous explique tout !

Les 25 meilleurs filaments 3D  : comparatif et guide d'achat | All3DP

L'imprimante 3D Original Prusa Mini, le modèle plus petit et plus abordable de Prusa, est-elle la machine que vous attendiez depuis toujours ? Jetons un œil aux caractéristiques de cette nouvelle venue.

Original Prusa Mini : toutes les infos sur l'imprimante 3D | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.</p>
<p>This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.</p>
<p>The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.</p>
<p>The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be &quot;worked&quot; a little after assembly before its mounted on the printer.</p>
<p>This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.</p>
<p>BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement</p>
<p>You need a total of 25 links, and about 30 clips</p>
<p>Mounted to the frame with 2X M4 T nuts</p>
<p>The fanduct is a remake of<br><a rel="nofollow" href="/thing:4091776">https://www.thingiverse.com/thing:4091776</a></p>
<p>The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.</p>
<p>You can find the fan mount here<br><a rel="nofollow" href="/thing:4616767">https://www.thingiverse.com/thing:4616767</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kay3D Core XY  Ender 5 plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Form+Futura+PLA&amp;tag=tv-auto-20" target="_blank">
                        Form Futura PLA                    </a>

                    Black
</body></html>

Ender 5 plus, KAY3D CoreXY, Modification pack.

This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.

This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.
 
The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.

The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be "worked" a little after assembly before its mounted on the printer.

This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.

BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement

You need a total of 25 links, and about 30 clips

Mounted to the frame with 2X M4 T nuts

The fanduct is a remake of
https://www.thingiverse.com/thing:4091776

The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.

You can find the fan mount here
https://www.thingiverse.com/thing:4616767

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>TwoTrees Sapphire Plus filament spool holder extension</p>
<p>the filament spool holder from the box of this printer is too short for standard spool sizes. To install this adapter, you must cut off the end of the iron holder and put on this extension</p>
<p>in case if fixing not enough strong - then you can use optionally M3 &#x445; 16mm bolt nut (but i not used it because the extension is worn on the regular holder tightly enough)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Sapphire Plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=FDplast+PETG&amp;tag=tv-auto-20" target="_blank">
                        FDplast PETG                    </a>

                    Marvell
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>250C / 68C</p></div>
</body></html>

Sapphire Plus filament spool holder extension

TwoTrees Sapphire Plus filament spool holder extension

the filament spool holder from the box of this printer is too short for standard spool sizes. To install this adapter, you must cut off the end of the iron holder and put on this extension

in case if fixing not enough strong - then you can use optionally M3 х 16mm bolt nut (but i not used it because the extension is worn on the regular holder tightly enough)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Fran&#xE7;ais</p>
<p>03/11/2020</p>
<p>Pi&#xE8;ce de guidage d&apos;air sous le ventilateur de refroidissement de la buse.</p>
<hr><p>06/11/2020</p>
<p>J&apos;ai fait un second design sans cong&#xE9; pour une plus belle impression sans support.</p>
<p>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++</p>
<p>English</p>
<p>11/03/2020</p>
<p>Air guide piece under the nozzle cooling fan.</p>
<hr><p>11/06/2020</p>
<p>I made a second design without fillet for a nicer print without support.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SUNLU+PLA%2B+%2F+PETG&amp;tag=tv-auto-20" target="_blank">
                        SUNLU PLA+ / PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Vous pouvez mettre des supports si vous le d&#xE9;sirez. </p>
<p>You can put supports if you wish.</p></div>
</body></html>

Guidage d'air Ventilateur de buse

Français

03/11/2020

Pièce de guidage d'air sous le ventilateur de refroidissement de la buse.

__________________________________________________________________

06/11/2020

J'ai fait un second design sans congé pour une plus belle impression sans support.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

English

11/03/2020

Air guide piece under the nozzle cooling fan.

__________________________________________________________________

11/06/2020

I made a second design without fillet for a nicer print without support.



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The filament sensor housing that my Ender 5-Plus comes with is kinda crappy. I try to put filament through it and it gets jammed up at the switch part. Even if i cut the filament so its pointy, sometimes the filament still gets jammed up at that point. I saw other filament sensor housing designs and noticed that they use a PTFE tube. So, i modeled my own housing in TinkerCAD based off of the stock filament sensor housing that comes with the Ender 5-Plus.</p>
<p>This can probably work on other creality machines that use the same filament sensor housing/microswitch as the Ender 5-Plus</p>
<p>You might need to hot glue the PTFE tube to the housing so it doesn&apos;t move around</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA+%2F+PETG+%2F+ABS&amp;tag=tv-auto-20" target="_blank">
                        Any PLA / PETG / ABS                    </a>

                    Any
</body></html>

PTFE Lined Filament Sensor Housing for Ender 5-Plus / Other CREALITY Machines

The filament sensor housing that my Ender 5-Plus comes with is kinda crappy. I try to put filament through it and it gets jammed up at the switch part. Even if i cut the filament so its pointy, sometimes the filament still gets jammed up at that point. I saw other filament sensor housing designs and noticed that they use a PTFE tube. So, i modeled my own housing in TinkerCAD based off of the stock filament sensor housing that comes with the Ender 5-Plus.

This can probably work on other creality machines that use the same filament sensor housing/microswitch as the Ender 5-Plus

You might need to hot glue the PTFE tube to the housing so it doesn't move around

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Precisely level your 3D printer bed using a cheap and readily available tire tread depth gauge.</p>
<p>Includes frame to attach the gauge to Sapphire Pro and Plus, as well as Creality the printers with a single cooling fan.</p>
<p>Attribution should go to dalul96 for this thing: <a rel="nofollow" href="/thing:3041642">https://www.thingiverse.com/thing:3041642</a> as I copied the way the corners are done. I hope you don&apos;t mind.</p>
<p>Level one corner using the paper method, zero the probe then move the print head to the other 3 corners and adjust until the probe reads 0. Then zero the original corner and re-check the other 3 corners.</p>
<p>Fine tune by printing a single (or double layer) square over one corner, and adjust until you have good bed contact (squish). Re-attach the probe and zero it over that corner, then transfer the zero to the other 3 corners. You should now have a perfectly level bed.</p>
<p>Note: The gauge can be modified by removing a bow shaped metal spring from the inside. That allows the probe to follow the contour of the bed as the print head is jogged around. Otherwise you need to pull up the probe before moving the print head, and push it down when you want to take a reading.</p>
<p>If you have a BL touch, or other probe, you should also keep your bed leveled as to minimise the adjustment needed by the mesh leveling. That adjustment is gradually removed over successive layers, so any leveling error will be reflected in the geometry of your part.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The design is printed in 2 parts and then clips together. This is necessary to allow printing with no supports, and to get the necessary strength for the clip not to break as the gauge is clipped in and out.</p>
<p>To clip the 2 parts together, I suggest fully clip on one edge then clip the second edge. Don&apos;t try to push the clip on evenly. There is less flex of the clip when done one edge at a time.</p>
<p>You can remove the clip, just un-clip one edge and it should come off easily. The clip is not as fragile as it looks when printed in the proper orientation.</p></div>
</body></html>

Tread Depth Gauge Holder for Sapphire Pro/Plus and Creality

Precisely level your 3D printer bed using a cheap and readily available tire tread depth gauge.

Includes frame to attach the gauge to Sapphire Pro and Plus, as well as Creality the printers with a single cooling fan.

Attribution should go to dalul96 for this thing: https://www.thingiverse.com/thing:3041642 as I copied the way the corners are done. I hope you don't mind.

Level one corner using the paper method, zero the probe then move the print head to the other 3 corners and adjust until the probe reads 0. Then zero the original corner and re-check the other 3 corners.

Fine tune by printing a single (or double layer) square over one corner, and adjust until you have good bed contact (squish). Re-attach the probe and zero it over that corner, then transfer the zero to the other 3 corners. You should now have a perfectly level bed.

Note: The gauge can be modified by removing a bow shaped metal spring from the inside. That allows the probe to follow the contour of the bed as the print head is jogged around. Otherwise you need to pull up the probe before moving the print head, and push it down when you want to take a reading.

If you have a BL touch, or other probe, you should also keep your bed leveled as to minimise the adjustment needed by the mesh leveling. That adjustment is gradually removed over successive layers, so any leveling error will be reflected in the geometry of your part.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My wife wanted a quick and easy wall mount to put her Seagate 8TB Backup Plus Hub hard drive out of the way. She uses this as her Mac Time Machine backup disc. This covers the bottom half of the drive if you slip it in long way, USB and AC holes down. The side vents are open on the right bottom for ventilation.</p>
<p>This is the drive in question: <a rel="nofollow" href="https://www.seagate.com/consumer/backup/backup-plus-desk/">https://www.seagate.com/consumer/backup/backup-plus-desk/</a></p>
<p>STL and SketchUp files included for your enjoyment!</p>
<p>Cheers, Andrew</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>This could probably be done with a brim build plate adhesion support. I did a raft just to test it.</p></div>
</body></html>

Seagate 8TB Backup Plus Hub Wall Mount (half sleeve)

My wife wanted a quick and easy wall mount to put her Seagate 8TB Backup Plus Hub hard drive out of the way. She uses this as her Mac Time Machine backup disc. This covers the bottom half of the drive if you slip it in long way, USB and AC holes down. The side vents are open on the right bottom for ventilation.

This is the drive in question: https://www.seagate.com/consumer/backup/backup-plus-desk/

STL and SketchUp files included for your enjoyment!

Cheers, Andrew

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Yet Another Garmin Mount</h3>
<p>Garmin mount on Profile Design (short) aero bar on Canyon Aeroroad (v1) handlebar H36. And to top it off - including Knog Plus Lights (front) holder.<br>
Yes, it gets &quot;tight&quot; on the cockpit - short bars are just not comfortable anyways!</p>
<p>Mount is tied to bars with two zip ties.</p>
<p>A neodym magnet ist glued into the case, to mimik the orginal light mount.<br>
The mini side lever helps remove the light. Fits snug. Doesn&apos;t move.</p>
<h3>Requirements</h3>
<ul><li>Garmin mount disc (the one you get with a handlebar mount incl. two mini bolts)</li>
<li>2 zip ties</li>
<li>neodym magnet (cylinder, square, anything that fits)</li>
<li>glue to glue the magnet in place</li>
</ul><h3>Three files</h3>
<p>...for you remixing pleasure:</p>
<ul><li>Complete assembly</li>
<li>Garmin only</li>
<li>Knog Plus only</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-20</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ecoPLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        ecoPLA PLA                    </a>

                    Black
</body></html>

YAGM - Yet Another Garmin Mount

Yet Another Garmin Mount
====================

Garmin mount on Profile Design (short) aero bar on Canyon Aeroroad (v1) handlebar H36. And to top it off - including Knog Plus Lights (front) holder.
Yes, it gets "tight" on the cockpit - short bars are just not comfortable anyways!

Mount is tied to bars with two zip ties.

A neodym magnet ist glued into the case, to mimik the orginal light mount.
The mini side lever helps remove the light. Fits snug. Doesn't move.

Requirements
--------------------
- Garmin mount disc (the one you get with a handlebar mount incl. two mini bolts)
- 2 zip ties
- neodym magnet (cylinder, square, anything that fits)
- glue to glue the magnet in place

Three files
---------------
...for you remixing pleasure:
- Complete assembly
- Garmin only
- Knog Plus only

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Made to replace the original screen with a Duet paneldue in the factory location</p>
<p>I use the paneldue lcd case form LumberjackEngineering to complete<br><a rel="nofollow" href="/thing:2799628">https://www.thingiverse.com/thing:2799628</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Maker Select Plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.24</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=amazon+Petg&amp;tag=tv-auto-20" target="_blank">
                        amazon Petg                    </a>

                    Black
</body></html>

Sapphire plus duet paneldue mount

Made to replace the original screen with a Duet paneldue in the factory location

I use the paneldue lcd case form LumberjackEngineering to complete
https://www.thingiverse.com/thing:2799628

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Battery Holder 4s-6s lipo Free 3D print model</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>anycubic 4 max pro </p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=sunlu+TPU+&amp;tag=tv-auto-20" target="_blank">
                        sunlu TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU Print Speed of 50mm/s. </p></div>
</body></html>

Battery Holder 4s-6s lipo Free 3D print model

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just simple wanhao duplicator i3 plus hot bed tightening nuts.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Wanhao</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2DqRItw?tag=tv-auto-20" target="_blank">Wanhao Duplicator i3 Plus</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Gainvard+PLA&amp;tag=tv-auto-20" target="_blank">
                        Gainvard PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Don&apos;t think this needs a lot of explaining. </p></div>
</body></html>

Duplicator i3 Plus - Bed Wingnut 

Just simple wanhao duplicator i3 plus hot bed tightening nuts.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Soporte con cajon porta herramientas</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Smartfil+Pla&amp;tag=tv-auto-20" target="_blank">
                        Smartfil Pla                    </a>

                    Negro
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Practica y preciosa base -cajon para la Mercury de Elego,quedando a la misma altura que la Mars,se adjunta un cajon impreso,no obstante yo lo hice de madera poniendole un precioso frente rematado con un pomo espectacular :-) ,termine el plastico y era una espera de dos interminables dias, imposible tanta espera,y la madera estaba al lado :-),las letras estan en Gallego,idioma de Galicia,un estado de la republica monarquica de Espa&#xF1;a :-))))))</p></div>
</body></html>

Base Elegoo Mercury Plus

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a cover for the battery connector that I use when the battery is not connected. It protects the connector from dust/rain/dirt, especially when transporting it on a bike rack.<br>
Used on a NCM Moscow Plus but should fit on any Reention Dorado system.</p>
<p>--</p>
<p>Eine Abdeckung f&#xFC;r den Batterieanschluss an meinem Moscow Plus (passend f&#xFC;r alle Reention Dorado Systeme. Ich verwende sie, wenn die Batterie nicht angeschlossen ist. Sie sch&#xFC;tzt den Stecker vor Staub/Regen/Schmutz, insbesondere beim Transport auf unserem  Fahrradtr&#xE4;ger.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Unbranded+PLA&amp;tag=tv-auto-20" target="_blank">
                        Unbranded PLA                    </a>

                    Black
</body></html>

NCM Moscow / Dorado Reention battery connector plug / Abdeckung

This is a cover for the battery connector that I use when the battery is not connected. It protects the connector from dust/rain/dirt, especially when transporting it on a bike rack.
Used on a NCM Moscow Plus but should fit on any Reention Dorado system.

--

Eine Abdeckung für den Batterieanschluss an meinem Moscow Plus (passend für alle Reention Dorado Systeme. Ich verwende sie, wenn die Batterie nicht angeschlossen ist. Sie schützt den Stecker vor Staub/Regen/Schmutz, insbesondere beim Transport auf unserem  Fahrradträger.

Thingscanner

Some articles you might like

New Zortrax Materials Expand Production Possibilities of Inventure 3D Printer | All3DP

Les 35 meilleurs projets Arduino en 2021 | All3DP

Raspberry Pi 4 : toutes les infos sur ce nouveau micro-ordinateur ! | All3DP

Creality Ender 5 Plus – Caractéristiques et points-clés | All3DP

2021 Best Creality Ender 5 Plus Upgrades & Mods | All3DP

Wanhao Duplicator 7 (D7) Plus 3D Printer – Review the Specs | All3DP

Ender 5 Plus Silent Board: How to Install It | All3DP

Anet A8 Plus Review: Hands On | All3DP

Raise3D N2 Plus: Review the Specs | All3DP

Zortrax M200 Plus: Review the Specs | All3DP

Les 25 meilleurs filaments 3D  : comparatif et guide d'achat | All3DP

Original Prusa Mini : toutes les infos sur l'imprimante 3D | All3DP

Show Only

Looking for tag: plus

Thingscanner

Some articles you might like

New Zortrax Materials Expand Production Possibilities of Inventure 3D Printer | All3DP

Les 35 meilleurs projets Arduino en 2021 | All3DP

Raspberry Pi 4 : toutes les infos sur ce nouveau micro-ordinateur ! | All3DP

Creality Ender 5 Plus – Caractéristiques et points-clés | All3DP

2021 Best Creality Ender 5 Plus Upgrades & Mods | All3DP

Wanhao Duplicator 7 (D7) Plus 3D Printer – Review the Specs | All3DP

Ender 5 Plus Silent Board: How to Install It | All3DP

Anet A8 Plus Review: Hands On | All3DP

Raise3D N2 Plus: Review the Specs | All3DP

Zortrax M200 Plus: Review the Specs | All3DP

Les 25 meilleurs filaments 3D : comparatif et guide d'achat | All3DP

Original Prusa Mini : toutes les infos sur l'imprimante 3D | All3DP

Show Only

Looking for tag: plus

Les 25 meilleurs filaments 3D  : comparatif et guide d'achat | All3DP