As sponsor and trophy maker of the Lodewijk van der Grinten prize, colorFabb came up with a unique and interesting design for 2017. 

colorFabb Creates Lodewijk van der Grinten Prize 2017 Using Funky New nGen_LUX Filament | All3DP

Hauke-Scheer has a very special hobby, putting his own head on a fully articulated 3D printed action figure.

Hauke-Scheer Creates Mini-Me Action Figures with 3D Printing | All3DP

Researchers from Singapore University of Technology and Design (SUTD) have developed a two-step polymerization process to fully recycle 3D printed thermosetting photopolymers. 

Researchers Develop Polymerization Process to Recycle 3D Printing Materials | All3DP

Votre imprimante 3D vous fait des misères ? Votre extrudeur a peut-être besoin d’être recalibré ! Découvrez ici comment procéder.

Calibration de l'extrudeur (imprimante 3D) : 6 étapes faciles | All3DP

Carbon's Luke Kelly and Phil DeSimone talk Adidas Futurecraft, material innovation, and bringing 3D printing to the mass production stage. 

Carbon Talks Adidas Collaboration and Bringing 3D Printing to the Serial Production Stage | All3DP

Following one series from conception to completion, learn how the Funko POP! series of vinyl figures are created using 3D modeling and 3D printing. It's a veritable Saga, to be sure.

Behind the Scenes at Funko, Where 3D Printing Plays a Part | All3DP

Got an itch in your green thumb? Use your 3D printer and concrete mix to create a set of geometrically gorgeous pot molds to house your next batch of plants.

[Project] 3D Printed Geometric Concrete Pot Molds | All3DP

At the Rapid + TCT show in Texas, Tiertime shone a light on not one but three new 3D printers. One sees an upgrade to a familiar face -- the company's popular Up Mini 2 -- while the other two are all-new, including a 12-print-bed toting beast.

Tiertime Unveils Three New 3D Printers at Rapid + TCT 2018 | All3DP

Disney filed another 3D printing patent, which leaves behind the traditional "layer-by-layer" approach.

Disney Research Files Super-Fast 3D Printing Patent | All3DP

Instructables user 3DSage has designed a functional 3D printed speaker that is easy to build and actually works. Using magnets, wire, and a 3D printed cone, you can amplify your creativity with this educational Weekend Project.

[Project] Pump up the Volume with this 3D Printed Speaker | All3DP

Bodyscape is a 3D printed fashion garment which is illuminated by the wearer's movement. It's inspired by the behavior of the human body.

Behnaz Farahi's Bodyscape Creates "Illuminated Choreography" Through Motion | All3DP

Jump into this guide to find out how to install OctoPrint on the Raspberry Pi 3 B+, one of the most popular Pi boards available right now.

How to Set Up OctoPrint on Raspberry Pi 3 B+ – 3 Easy Steps | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I wanted to keep my paper stack organised and not stacked on a big paper staple ( i guess you all know that problem ;-) ) so i was looking for a nicely designed letter/paper holder but:</p>
<p>i didn&apos;t found one that was fitting my design imaginanations, so i decided to create my own one and during the process of creating, it started to look like a taco, so here it is:</p>
<p>The Taco Letter Holder (Voronoi Style)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Sidewinder X1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.4</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Das+Filament+PLA&amp;tag=tv-auto-20" target="_blank">
                        Das Filament PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><ul><li>
<p>No Support needed</p>
</li>
<li>
<p>Resolution 0.4</p>
</li>
<li>Infill 10% ( should be enough for only paper holding... ;-) )</li>
</ul></div>
</body></html>

The Taco Letter Holder (Voronoi Style)

I wanted to keep my paper stack organised and not stacked on a big paper staple ( i guess you all know that problem ;-) ) so i was looking for a nicely designed letter/paper holder but:

i didn't found one that was fitting my design imaginanations, so i decided to create my own one and during the process of creating, it started to look like a taco, so here it is:

The Taco Letter Holder (Voronoi Style)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I needed some customized sorters for the Stanley Deep Pro organizer boxes. I have printed many of these and I find I don&apos;t really need a full bin or even a bottom. Just the insert fits fine!</p>
<p>These fit almost right off the printer - but a little light sanding might be required to get a nice snug fit.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>FLSUN 2017 Version</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Any
</body></html>

Stanley Organizer Bin Dividers

I needed some customized sorters for the Stanley Deep Pro organizer boxes. I have printed many of these and I find I don't really need a full bin or even a bottom. Just the insert fits fine!

These fit almost right off the printer - but a little light sanding might be required to get a nice snug fit.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a toothbrush holder I designed. Has two separate sections to a cylindrical container, generally quite open and also has drainage holes at the bottom.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Filaform+PLA&amp;tag=tv-auto-20" target="_blank">
                        Filaform PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I printed this one at 100% infill PLA to get some weight behind it, but probably doesn&apos;t need it. Supports are for the drainage holes at the bottom. The blender file could probably be edited to have a smaller hole at the bottom and not require supports which I will do if I need to print it again.</p></div>
</body></html>

Toothbrush Holder

This is a toothbrush holder I designed. Has two separate sections to a cylindrical container, generally quite open and also has drainage holes at the bottom.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Updated lid to have logo and pieces organiser.</p>
<p>Saw that <a rel="nofollow" href="/thing:4156551">https://www.thingiverse.com/thing:4156551</a> was remixed from <a rel="nofollow" href="/thing:2927788/remixes">https://www.thingiverse.com/thing:2927788/remixes</a> but had removed the logo<br>
These were originally remixed from <a rel="nofollow" href="/thing:2836854">https://www.thingiverse.com/thing:2836854</a></p>
<p>So I just mixed the two together (using Tinkercad) to get the logo back on the lid, with the organiser for the pieces.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ANYCUBIC+PLA&amp;tag=tv-auto-20" target="_blank">
                        ANYCUBIC PLA                    </a>
</body></html>

Catan Player Box lid Logo+Organiser

Updated lid to have logo and pieces organiser.

Saw that https://www.thingiverse.com/thing:4156551 was remixed from https://www.thingiverse.com/thing:2927788/remixes but had removed the logo
These were originally remixed from https://www.thingiverse.com/thing:2836854

So I just mixed the two together (using Tinkercad) to get the logo back on the lid, with the organiser for the pieces.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Summary</h3>
<p>This custom insert will fit all components from Space Empires 4X and the Close Encounters expansion into the base game box.</p>
<h3>Instructions</h3>
<p>Everything except the player tray is just a simple rectangular box, so you should be able to crank up the print speed and layer width to speed things up.  The player tray has labels for each compartment, so there is a bit of detail there, but you should still be able to use fast print settings for it.</p>
<p>To fit all the components, you&apos;ll need to print the following:</p>
<ul><li>4x Player Tray</li>
<li>2x Deck Holder</li>
<li>1x Everything Else</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.30</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Novamaker+PLA&amp;tag=tv-auto-20" target="_blank">
                        Novamaker PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used 200% print speed on my printer.  I&apos;m not sure what that equates to on other brands, but all of these models are very simple, except for the labels on the player trays.</p></div>
</body></html>

Space Empires 4X Box Organizer

<h1>Summary</h1>
This custom insert will fit all components from Space Empires 4X and the Close Encounters expansion into the base game box.

<h1>Instructions</h1>
Everything except the player tray is just a simple rectangular box, so you should be able to crank up the print speed and layer width to speed things up.  The player tray has labels for each compartment, so there is a bit of detail there, but you should still be able to use fast print settings for it.

To fit all the components, you'll need to print the following:
* 4x Player Tray
* 2x Deck Holder
* 1x Everything Else

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My wife wanted a desk organiser, so i told her to pick one on Thingiverse.</p>
<p>I must say i like the original design, being modular, but i absolutely didn&#x2019;t like the way the male and female slots where designed.<br>
In my opinion (and as said in the comments) these should be inverted for much easier printing.</p>
<p>So i completely started from scratch and designed my version, based on the original design.</p>
<p>I also included the fusion360 and .STEP files for you to tinker with the design.<br>
If you do, please post it as a remix!</p>
<p>Please leave a comment if you have a request for a certain module, and i will be glad to design it.</p>
<p>All bases and modules can be printed WITHOUT supports.<br>
The slot in the bottom of a module is small enough for most printers to gap without problems.<br>
The single module base measurement is 84 by 84mm.</p>
<p>The base parts easily hook together and i think i included just about every variation i could think of. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Jupiter+%2F+SUNLU+PLA&amp;tag=tv-auto-20" target="_blank">
                        Jupiter / SUNLU PLA                    </a>

                    White / Rainbow
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The design is optimized for a 0.4 nozzle and 0.2 layer height</p></div>
</body></html>

Modular Desk Organiser

My wife wanted a desk organiser, so i told her to pick one on Thingiverse.

I must say i like the original design, being modular, but i absolutely didn’t like the way the male and female slots where designed.
In my opinion (and as said in the comments) these should be inverted for much easier printing.

So i completely started from scratch and designed my version, based on the original design.

I also included the fusion360 and .STEP files for you to tinker with the design.
If you do, please post it as a remix!

Please leave a comment if you have a request for a certain module, and i will be glad to design it.

All bases and modules can be printed WITHOUT supports.
The slot in the bottom of a module is small enough for most printers to gap without problems.
The single module base measurement is 84 by 84mm.

The base parts easily hook together and i think i included just about every variation i could think of. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Coin organise / stacker for Australian coins.</p>
<p>It&apos;s printing at the moment, when it&apos;s done I&apos;ll add photos of it.</p></div>
</body></html>

Australian coin organiser

Coin organise / stacker for Australian coins.

It's printing at the moment, when it's done I'll add photos of it.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Insert for Romeo &amp; Juliette boardgames.</p>
<p>For Personal use</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Romeo & Juliette boardgame insert

Insert for Romeo & Juliette boardgames.

For Personal use

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My first design of a 14 Day Pill Organiser with hexagonal storage &apos;cells&apos;.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Tronxy XY-2 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=AMZ+PLA&amp;tag=tv-auto-20" target="_blank">
                        AMZ PLA                    </a>

                    Orange
</body></html>

Sliding Pill Box (14 Days)

My first design of a 14 Day Pill Organiser with hexagonal storage 'cells'.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Another pen organiser for your desktop.</p>
<p>When i&apos;m using my PILOT pens, I&apos;m always removing the cap and then putting it back on when I change colors.</p>
<p>So i decide to create an object to resolve my problem.</p>
<p>You have to put your cap in down position on predefined hole ( 1 hole for 1 color ) and when you finish with a color just slide it into is cap.</p>
<p>The Clic isn&apos;t necessary</p>
<p>Voici un support de stylo PILOT</p>
<p>Quand je suis en train d&apos;utiliser mes stylos PILOT, je suis tout le temps en train de changer de couleurs et je dois remettre le capuchon a chaque fois. </p>
<p>J&apos;ai donc d&#xE9;icide de faire un support de stylo pour &#xE9;viter ce probl&#xE8;me.</p>
<p>Il vous faut juste glisser vos capuchons dans les trous correspondants aux couleurs et quand vous avez fini, laissez juste glisser votre stylo le long du son capuchon</p>
<p>le click n&apos;est pas n&#xE9;cessaire . </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    white
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Pen PILOT Holder 

Another pen organiser for your desktop.

When i'm using my PILOT pens, I'm always removing the cap and then putting it back on when I change colors.

So i decide to create an object to resolve my problem.

You have to put your cap in down position on predefined hole ( 1 hole for 1 color ) and when you finish with a color just slide it into is cap.

The Clic isn't necessary

Voici un support de stylo PILOT

Quand je suis en train d'utiliser mes stylos PILOT, je suis tout le temps en train de changer de couleurs et je dois remettre le capuchon a chaque fois. 

J'ai donc déicide de faire un support de stylo pour éviter ce problème.

Il vous faut juste glisser vos capuchons dans les trous correspondants aux couleurs et quand vous avez fini, laissez juste glisser votre stylo le long du son capuchon

le click n'est pas nécessaire . 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My ridiculous collection of Copic Markers needed a home on my new desk, so I designed it one! Since the desk space is somewhat limited, I thought the best way to go would be up! I also wasn&apos;t entirely sure how I wanted it to look, so I thought, why not have options?! Options are great.</p>
<p>This Modular Vertical Honeycomb stand comes with 8 different options for pieces you can use to build your own custom organiser. There are both desk standable options as well as floating wall mountable options. These can be used together as well, as seen in my configuration. There are also &apos;end&apos; pieces if you want to introduce a bit of flair to your set up and have the edges have an irregular layout. There&apos;s a lot of variation that can be created here, so have fun with it!</p>
<p>These stands have been made to fit Copic Sketch Markers, but should fit most art markers, as well as a wide variety of art supplies. Want to use them for pencils and brushes? No problem! The usable diameter of the hexagons is about 18mm. Each stand has 24 slots, except for the Top and Bottom pieces which have 26.</p>
<p>To help with usability, there are also slots for 4mm x 1mm neodymium magnets on the sides, if you wish for your block of stands to keep together or be extra stable. Not a requirement to use them, but an option if desired!</p>
<p>Each block has two slots for screws up to an 8 gauge (imperial)/4.5mm diameter (metric) size to secure it to the wall. I would recommend securing at least one even if you have stacked on top of one another for extra stability!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15% grid</p></div>
<p></p>                                    
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Not a particularly tricky print, just a bit long! Unless you do not require the magnet slots, you must print with a maximum of .2mm layer heights or the slots will collapse and not fit magnets. </p></div>
</body></html>

Modular Vertical Honeycomb Copic Marker Stand

My ridiculous collection of Copic Markers needed a home on my new desk, so I designed it one! Since the desk space is somewhat limited, I thought the best way to go would be up! I also wasn't entirely sure how I wanted it to look, so I thought, why not have options?! Options are great.

This Modular Vertical Honeycomb stand comes with 8 different options for pieces you can use to build your own custom organiser. There are both desk standable options as well as floating wall mountable options. These can be used together as well, as seen in my configuration. There are also 'end' pieces if you want to introduce a bit of flair to your set up and have the edges have an irregular layout. There's a lot of variation that can be created here, so have fun with it!

These stands have been made to fit Copic Sketch Markers, but should fit most art markers, as well as a wide variety of art supplies. Want to use them for pencils and brushes? No problem! The usable diameter of the hexagons is about 18mm. Each stand has 24 slots, except for the Top and Bottom pieces which have 26.

To help with usability, there are also slots for 4mm x 1mm neodymium magnets on the sides, if you wish for your block of stands to keep together or be extra stable. Not a requirement to use them, but an option if desired!

Each block has two slots for screws up to an 8 gauge (imperial)/4.5mm diameter (metric) size to secure it to the wall. I would recommend securing at least one even if you have stacked on top of one another for extra stability!

<p>i have create 2 versions .</p>

<p>the first version have 21mm  inside .</p>

<p>the second version have 41 mm  inside .</p>


Organiser for office

i have create 2 versions .

the first version have 21mm  inside .

the second version have 41 mm  inside .


Thingscanner

Some articles you might like