Open source meets the open road with the Open RC Accessory Design Contest, courtesy of Pinshape and Open RC Project founder Daniel Noree.

Enter the Pinshape Open RC Accessory Design Contest | All3DP

Open Βionics is an open-source initiative for the development of affordable, light-weight robot hands. We visited them at 3D Printshow London.

Hand printing by Open Bionics | All3DP

We talk to Open Bionics co-founder Samantha Payne about 3D printed prosthetics, turning kids into superheroes, and the value of open source.

Open Bionics Samantha Payne Helps Disabled Kids Become Superheroes | All3DP

In a big win for the open source 3D printing community, BCN3D Technologies release open source files for BCN3D Sigmax desktop 3D printer.

Open Source Files for BCN3D Sigmax 3D Printer Released | All3DP

In a remarkable step, BCN3D Technologies have open-sourced the design files and software for their high-end BCN3D Sigma 3D printer.

BCN3D Sigma Blueprints Fully Open Sourced | All3DP

Open source is considered a must-have for many 3D printing enthusiasts. Check out some of the best open-source 3D printers available today.

Top 10 Open-Source 3D Printers | All3DP

Open-source 3D scanning brings the technology to the masses, making it cost-effective and customizable. Check out our favorite open-source 3D scanners for 2019!

5 Best Open-Source 3D Scanners | All3DP

Home 3D printers have profited a lot from Open Source. iC3D and Aleph Objects are going the extra mile by open sourcing 3D printer filament.

iC3D and Aleph Objects Start Driving Open Source 3D Printer Filament | All3DP

Wide Open Arts are creating an installation of 3D printed towers in New York City, with an open invite for creative professionals to submit their designs.  

Wide Open Arts: Your 3D Printed Tower Could be Exhibited in NYC | All3DP

Citing a need to protect IP and freedom to innovate, open source 3D printer manufacturer Ultimaker is now investing in defensive patents.

Ultimaker Files Defensive Patents, Abandoning Open Source? | All3DP

The Hangprinter is an open-source printer which has no frame but works by anchoring to the floor and hanging from the ceiling by cables.

The Open Source Hangprinter Prints Without A Frame | All3DP

The Radcliffe Science Library at the University of Oxford has trialled a 3D printing service for the past year, with interesting results.

3D Printing Services at Libraries Provide Open Access | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.</p>
<p>We really like <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>, but we needed something slightly different. Rather than modify guppyk&apos;s model, we chose to create a similar design in OpenSCAD that is fully customizable.</p>
<h3>OpenSCAD Customizer Options</h3>
<p>You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.</p>
<h3>Single Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code> - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Stem</h4>
<ul><li><code>Stem_Material_Thickness</code> - Thickness of stem (X and Y axis)</li>
<li><code>Stem_Height</code> - Height of stem (Z axis)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Grip_Width</code> - Width of grip (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Square_Handle</code> - Should the handle be square?</li>
</ul><h4>Base</h4>
<ul><li><code>Base_Enabled</code> - Should a base be added?</li>
<li><code>Base_Lip_Width</code> - Width of base lip (X and Y axis)</li>
<li><code>Base_Lip_Height</code> - Height of base lip (Z axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Dual Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Distance</code> - Distance between the screws</li>
<li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code>  - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Material_Thickness</code> - Thickness of handle (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Handle_End_Length</code> - Handle end length (in addition to Handle_Material_Thickness)</li>
</ul><h4>Hand Hole</h4>
<ul><li><code>Hand_Hole_Width</code> - Width of hand hole (X axis)</li>
<li><code>Hand_Hole_Depth</code> - Depth of hand hole (Y axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Versions</h3>
<h3>Single Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Dual Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Printing</h3>
<p>Recommended slicer settings:</p>
<ul><li>Resolution: 0.1mm - 0.2mm</li>
<li>Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)</li>
<li>Supports: Doesn&apos;t Matter</li>
<li>Rafts: Doesn&apos;t Matter</li>
</ul><p>For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called <code>Z Seam Alignment</code>.</p>
<p>For small single point handles, you may need a print with a brim.</p>
<h3>Attribution</h3>
<p>This work, <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> was inspired by <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>.</p>
<p>Whilst some of the models included in the project may appear similar to the models from guppyk&apos;s project, the code and files in this project do not include any of the code or files from guppyk&apos;s project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).</p>
<p>Although we do not believe this project can strictly be considered a derivative (or &apos;remix&apos; in Thingiverse parlance) of guppyk&apos;s project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a &apos;remix&apos; of guppyk&apos;s project on Thingiverse to show our appreciation.</p>
<p><a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a> by <a rel="nofollow" href="/guppyk/">guppyk</a> is licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="/guppyk/">guppyk</a>.</p>
<h3>License</h3>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> models (.stl) are licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> code (.scad &amp; .json) is licensed under <a rel="nofollow" href="https://opensource.org/licenses/MIT">The MIT License</a> by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p></div>
</body></html>

Fully Customizable General Purpose Handles

Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.

We really like [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895), but we needed something slightly different. Rather than modify guppyk's model, we chose to create a similar design in OpenSCAD that is fully customizable.

OpenSCAD Customizer Options
---------------------------

You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.

### Single Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle` - Screw countersink angle (82 and 90 are common)

#### Stem

* `Stem_Material_Thickness` - Thickness of stem (X and Y axis)
* `Stem_Height` - Height of stem (Z axis)

#### Handle

* `Handle_Grip_Width` - Width of grip (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Square_Handle` - Should the handle be square?

#### Base

* `Base_Enabled` - Should a base be added?
* `Base_Lip_Width` - Width of base lip (X and Y axis)
* `Base_Lip_Height` - Height of base lip (Z axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

### Dual Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Distance` - Distance between the screws
* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle`  - Screw countersink angle (82 and 90 are common)

#### Handle

* `Handle_Material_Thickness` - Thickness of handle (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Handle_End_Length` - Handle end length (in addition to Handle_Material_Thickness)

#### Hand Hole

* `Hand_Hole_Width` - Width of hand hole (X axis)
* `Hand_Hole_Depth` - Depth of hand hole (Y axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

Versions
--------

### Single Point Variant

* 1.0 (4 Nov 2020) - Initial version

### Dual Point Variant

* 1.0 (4 Nov 2020) - Initial version


Printing
--------

Recommended slicer settings:

* Resolution: 0.1mm - 0.2mm
* Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)
* Supports: Doesn't Matter
* Rafts: Doesn't Matter

For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called `Z Seam Alignment`.

For small single point handles, you may need a print with a brim.

Attribution
-----------

This work, [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) was inspired by [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895).

Whilst some of the models included in the project may appear similar to the models from guppyk's project, the code and files in this project do not include any of the code or files from guppyk's project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).

Although we do not believe this project can strictly be considered a derivative (or 'remix' in Thingiverse parlance) of guppyk's project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a 'remix' of guppyk's project on Thingiverse to show our appreciation.

[Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895) by [guppyk](https://www.thingiverse.com/guppyk/) is licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [guppyk](https://www.thingiverse.com/guppyk/).

License
-------

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) models (.stl) are licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [Code and Make](https://codeandmake.com).

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) code (.scad & .json) is licensed under [The MIT License](https://opensource.org/licenses/MIT) by [Code and Make](https://codeandmake.com).

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a box for the WeAct-TC MiniSTM32H7xx board. The MiniSTM32H7xx has camera and lcd, and runs openmv, a machine vision project.</p>
<p>You can download the <a rel="nofollow" href="https://github.com/koendv/weact-mini-stm32h7xx-box">openscad source files</a> from github.</p>
<p>Remix of <a rel="nofollow" href="/thing:2866563">Customizable snap-fit electronics project box enclosure</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
</body></html>

Box for WeAct-TC Mini-STM32H7xx board

This is a box for the WeAct-TC MiniSTM32H7xx board. The MiniSTM32H7xx has camera and lcd, and runs openmv, a machine vision project.

You can download the [openscad source files](https://github.com/koendv/weact-mini-stm32h7xx-box) from github.

Remix of [Customizable snap-fit electronics project box enclosure](https://www.thingiverse.com/thing:2866563)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a mathematically specified ghost. By changing parameters in the customizer, you can change the shape and other properties of the model.</p>
<p>The default setting produces a thin-walled model which will print relatively fast. It will print without support, just make sure the first layer sticks on the build plate.</p>
<p>Optionally, you can instead generate a filled model. For a filled model, you can use a low infill.</p></div>
</body></html>

Parametric Ghost

This is a mathematically specified ghost. By changing parameters in the customizer, you can change the shape and other properties of the model.

The default setting produces a thin-walled model which will print relatively fast. It will print without support, just make sure the first layer sticks on the build plate.

Optionally, you can instead generate a filled model. For a filled model, you can use a low infill.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is an opensource business card box for lasercutting.<br>
Dies ist eine opensource Visitenkarten-Box. <br><br></p>
<p>for cards with size of / f&#xFC;r Karten der Gr&#xF6;&#xDF;e: <strong>85mm x 55mm</strong><br><br></p>
<p>For sheets of wood and PMMA with a thickness of 6mm.<br>
F&#xFC;r Platten aus Holz und Pmma mit einer Dicke von 6mm  <br><br></p>
<p>For stabilty  glue the interlockings together with wood-glue.<br>
F&#xFC;r besten Halt die Verzahnungen mit wasserfestem Holzleim verkleben. </p>
<p><br><br></p>
<p>Design by Dirk Feyerabend<br><br><br><br>
created with boxes.py <a rel="nofollow" href="https://github.com/florianfesti/boxes">https://github.com/florianfesti/boxes</a> and editing in Inkscape</p></div>
</body></html>

lasercut  business card box

This is an opensource business card box for lasercutting.
Dies ist eine opensource Visitenkarten-Box. <br> <br>

for cards with size of / für Karten der Größe: **85mm x 55mm**
 <br> 

For sheets of wood and PMMA with a thickness of 6mm.
Für Platten aus Holz und Pmma mit einer Dicke von 6mm  <br><br>

For stabilty  glue the interlockings together with wood-glue.
Für besten Halt die Verzahnungen mit wasserfestem Holzleim verkleben. 

<br><br>



Design by Dirk Feyerabend 
 <br><br>
created with boxes.py https://github.com/florianfesti/boxes and editing in Inkscape

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Holder for electronics wires. The top section holding the spools is a PVC Pipe of 32mm. The top section can be lifted up so that the spools can be replaced when they are empty.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Real+PLA&amp;tag=tv-auto-20" target="_blank">
                        Real PLA                    </a>

                    Red
</body></html>

Electrical wire holder

Holder for electronics wires. The top section holding the spools is a PVC Pipe of 32mm. The top section can be lifted up so that the spools can be replaced when they are empty.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is my first attempt at 3D design. Hope you find it useful.<br>
The joints come in 3 common sizes of material thickness:</p>
<ul><li>12 mm</li>
<li>16 mm</li>
<li>18 mm</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA                    </a>

                    Black
</body></html>

DIY Furniture Joints

This is my first attempt at 3D design. Hope you find it useful.  
The joints come in 3 common sizes of material thickness:
    - 12 mm
    - 16 mm
    - 18 mm

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The Anet E10 3D printer had positioning failures in the y-axle.<br>
The reason was a defective ball bearing.<br>
I exchanged all ball bearings.<br>
That was not all.<br>
I had to exchange the guide axle also, because of grooves that had been caused by the bearing balls of the ball bearing. As the new axle is longer than the original one, I had to design new axle brackets. </p>
<p>Required:<br>
M3 thread cutter<br>
2 x M3 * 20 screws</p>
<p>This Anet E10 Y-Axle Brackets consists of:</p>
<ul><li>Front Bracket (2 needed)</li>
<li>Rear Bracket with switch support (1 needed)</li>
<li>Rear Bracket without switch support (1 needed)</li>
<li>Axle extension (to fasten the axle if it is not long enough (optional))</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Anet E10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=OWL-Filament+PLA&amp;tag=tv-auto-20" target="_blank">
                        OWL-Filament PLA                    </a>

                    Gray
</body></html>

Anet E10 Y-Axle Brackets

The Anet E10 3D printer had positioning failures in the y-axle.
The reason was a defective ball bearing.
I exchanged all ball bearings.
That was not all.
I had to exchange the guide axle also, because of grooves that had been caused by the bearing balls of the ball bearing. As the new axle is longer than the original one, I had to design new axle brackets. 

Required:
M3 thread cutter
2 x M3 * 20 screws

This Anet E10 Y-Axle Brackets consists of:
- Front Bracket (2 needed)
- Rear Bracket with switch support (1 needed)
- Rear Bracket without switch support (1 needed)
- Axle extension (to fasten the axle if it is not long enough (optional))

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>You can access to various open source designs that you can download, modify and 3D print through our website.<br>
Visit the website to see the suggested avionic parts and technical specs.</p>
<p>Please contact for questions.</p></div>
</body></html>

 Lisu 3 inch FPV Drone Frame

You can access to various open source designs that you can download, modify and 3D print through our website.
Visit the website to see the suggested avionic parts and technical specs.

Please contact for questions.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I used it to fix the tube of my weather station on a wall.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">i3 MK3</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Prusament+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Prusament TPU                     </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Prusement PETG. </p></div>
</body></html>

Parametric wall pipe support

I used it to fix the tube of my weather station on a wall.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The thing that can easily open PET bottle that do not open well</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/dd/55/b9/c5/43/1.jpg"></p>
                <p class="detail-caption"><strong>The thing that can easily open PET bottle that do not open well</strong></p>
</body></html>

The thing that can easily open PET bottle that do not open well

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This was designed as the packers found here - <a rel="nofollow" href="https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/">https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/</a> - were not tall enough for my Anet ET4 Pro. These simply replace the packers in the link.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Anet ET4 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSun+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        eSun PLA+                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed with Anet ET4 Pro, 0.1mm resolution for the extra fine detail, 35% infill for the strength. PLA+ is preferred over standard PLA because of the extra durabilitiy however it is not required.</p></div>
</body></html>

Packer for Tall 3D Printer Enclosure (Ikea Lack Design)

This was designed as the packers found here - https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/ - were not tall enough for my Anet ET4 Pro. These simply replace the packers in the link.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I modified this nice little Keychron bevel so that it would fit my K2!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>MakerBot</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2ngdGqv?tag=tv-auto-20" target="_blank">MakerBot Replicator 2</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Makerbot+PLA&amp;tag=tv-auto-20" target="_blank">
                        Makerbot PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I didn&apos;t actually print this myself, I got a hobby shop down the street to do it for $12.</p></div>
</body></html>

Keychron K2 (V2) Bezel

I modified this nice little Keychron bevel so that it would fit my K2!

Thingscanner

Some articles you might like