Nozzle degradation is bad news for your prints. Read on to learn about the Olsson Ruby nozzle and how it can help!

Olsson Ruby Nozzle: Review the Specs | All3DP

When dialing in a 3D printer, the nozzle is often overlooked. Read on for an in-depth look into 3D printer nozzle types, size, and material.

3D Printer Nozzle Guide: What to Know & Which to Buy | All3DP

Enjoying the quality prints on your Creality Ender 3 but looking for a little more? Perhaps you should consider swapping the nozzle. Find out more about the different Ender 3 nozzle sizes and material options!

Ender 3 (Pro) Nozzle Size: Which Sizes Are Supported? | All3DP

Plug and play printers have significant advantages and are easy to handle, but with some drawbacks regarding maintenance. Here we show what you need to know.

Ultimaker 3 Nozzle – How to Replace Worn Parts | All3DP

In March, Montreal-based Dyze Design launched the Tungsten Carbide nozzle on Kickstarter. A state of the art 3D printing accessory, the nozzle offers high wear resistance and performance for almost any 3D printer. Fully funded and then some, it's not too late to get in on Early Bird pledges.

The Tungsten Carbide Nozzle Now 170% Funded on Kickstarter | All3DP

Vitamix partners with The Technology House to use Carbon's 3D printing technology to transform part design and production. The blending equipment leader will mass produce a micro-fluidic nozzle that is 10 times more durable, uses 30 percent less material, and is 33 percent more economical. 

Vitamix Uses Carbon 3D Printing to Reimagine Nozzle Production | All3DP

Clogging -- the bane of all 3D printing enthusiasts. Oozing -- a lesser known problem often mistaken for the first. So how do you tell them apart? That's what we're here for! Read on for tips and tricks that will help you discover whether your extrusion issue is a single jam or something else completely...

Nozzle Clogging vs Hot End Oozing – What’s the Difference? | All3DP

In their quest to continually refine the 3D printing experience, E3D has created silicone socks for your hotends to keep your nozzle clean.

E3D Launches Silicone Socks for Cleaner Prints | All3DP

MatterHackers is knocking 15% off virtually every nozzle it carries, including the bejeweled Olsson Ruby, E3Ds of every size and other specialty nozzles.

[DEAL] 15% Off Nozzles at MatterHackers | All3DP

Clogged nozzles are a common issue in FDM 3D printers. Explore this guide discussing the easiest fix: The 3D printer cold pull method.

3D Printer Clogged Nozzle: How to Perform a Cold Pull | All3DP

The nozzle is the last thing that comes in contact with your 3D printed part. With such an important role, it's important to keep it maintained, ensuring the quality of your 3D prints. Here we show you a few methods to do just that.

3D Printer Nozzle Cleaning: The Easiest Way to Do It | All3DP

That d*mn nozzle broke again? Why print your accessories or replacement parts yourself? Hoover released two official 3D printable vacuum cleaner accessories on Thingiverse.

Print Your Vacuum Cleaner Replacement Parts | All3DP

the standard size nozzle on the thingiverse is a standard size, but too small for mine, so just made this. cannot login at thingiverse so share it here.

stove nozzle for bigger size end

the standard size nozzle on the thingiverse is a standard size, but too small for mine, so just made this. cannot login at thingiverse so share it here.


To purge and clean the nozzle before printing

Scrapper / racleur Tenlog 2H

To purge and clean the nozzle before printing


A simple screw-in holder for 3 mk8 style nozzles (e3d, creality)

Simple Nozzle Holder

A simple screw-in holder for 3 mk8 style nozzles (e3d, creality)


1.75mm Filament Compatible Nozzle Clogging Prevention Oil Tank

This basic vacuum hose attachment can be used for small/compact areas. No support material needed. I would advise to use a small brim, just to be sure there is enough surface area for print adhesion.

Support

If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (<a href="https://bit.ly/2Xyx4E0" rel="external">https://bit.ly/2Xyx4E0</a>) when buying something from AliExpress. It doesn&apos;t cost you anything extra, but helps me out a lot :)

Vacuum Cleaner Hose Attachment

This basic vacuum hose attachment can be used for small/compact areas. No support material needed. I would advise to use a small brim, just to be sure there is enough surface area for print adhesion.

Support

If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2Xyx4E0) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)


This nozzle is designed for producing a laminar high flow water stream from low to medium/high faucet setting. If turned fully on, the flow may get turbulent though. Fits most standard M20 faucets with inside thread, an inlay version for faucets with filter inlay is available as well. Can be printed without supports with the outlet facing the printbed. This model is not designed to save water, but it is really fun to play with the laminar stream at low settings. There are various very interesting effects to be observed.

Please consider whatever you feel fair to <a href="http://www.paypal.me/printhub" rel="external">www.paypal.me/printhub</a> if you are happy with the design.

German Version: Diese D&#xFC;se ist f&#xFC;r die Erzeugung eines laminaren Wasserstroms mit hohem Durchfluss von niedriger bis mittlerer / hoher Wasserhahneinstellung ausgelegt. Wenn der Wasserhahn voll offen ist, kann die Str&#xF6;mung jedoch turbulent werden. Passend f&#xFC;r die meisten Standard-M20-Wasserh&#xE4;hne mit Innengewinde. Eine Inlay-Version f&#xFC;r Wasserh&#xE4;hne mit Filter Einsatz ist ebenfalls erh&#xE4;ltlich. Kann ohne St&#xFC;tzen gedruckt werden, wobei der Auslass zum Druckbett zeigen sollte. Dieses Modell wurde nicht entwickelt, um Wasser zu sparen, aber es macht wirklich Spa&#xDF;, mit dem laminaren Strom bei niedrigen Einstellungen zu spielen. Es sind verschiedene sehr interessante Effekte zu beobachten. Ein weiterer Vorteil ist, dass hohe Flussraten bei geringer Empfindlichkeit f&#xFC;r Verkalkung erzielt werden k&#xF6;nnen.

Laminar Flow Faucet Nozzle

This nozzle is designed for producing a laminar high flow water stream from low to medium/high faucet setting. If turned fully on, the flow may get turbulent though. Fits most standard M20 faucets with inside thread, an inlay version for faucets with filter inlay is available as well. Can be printed without supports with the outlet facing the printbed. This model is not designed to save water, but it is really fun to play with the laminar stream at low settings. There are various very interesting effects to be observed.

Please consider whatever you feel fair to www.paypal.me/printhub if you are happy with the design.

German Version: Diese Düse ist für die Erzeugung eines laminaren Wasserstroms mit hohem Durchfluss von niedriger bis mittlerer / hoher Wasserhahneinstellung ausgelegt. Wenn der Wasserhahn voll offen ist, kann die Strömung jedoch turbulent werden. Passend für die meisten Standard-M20-Wasserhähne mit Innengewinde. Eine Inlay-Version für Wasserhähne mit Filter Einsatz ist ebenfalls erhältlich. Kann ohne Stützen gedruckt werden, wobei der Auslass zum Druckbett zeigen sollte. Dieses Modell wurde nicht entwickelt, um Wasser zu sparen, aber es macht wirklich Spaß, mit dem laminaren Strom bei niedrigen Einstellungen zu spielen. Es sind verschiedene sehr interessante Effekte zu beobachten. Ein weiterer Vorteil ist, dass hohe Flussraten bei geringer Empfindlichkeit für Verkalkung erzielt werden können.


As I like to keep my nozzles sorted by source, I needed something flexible to adapt to what was in those individual packages.

Nozzle marker / sorter / holder

As I like to keep my nozzles sorted by source, I needed something flexible to adapt to what was in those individual packages.


Cansado de que de vez en cuando se desprendiera la tobera de capa en medio de una impresi&#xF3;n, decid&#xED; dise&#xF1;ar esta que se sujeta con los mismos tornillos que sujetan el ventilador a diferencia de la original que se sujeta a presi&#xF3;n en la salida de aire.

Tobera Para ventilador de capa

Cansado de que de vez en cuando se desprendiera la tobera de capa en medio de una impresión, decidí diseñar esta que se sujeta con los mismos tornillos que sujetan el ventilador a diferencia de la original que se sujeta a presión en la salida de aire.


The Estes 1/45 scale Little Joe 2 is one beautiful model, but it has its issues. Even if you&apos;ve solved the adhesive compatibility problems, you still risk melting the plastic dress-up nozzles when you launch it. One solution is to remove the nozzles before flying, and this mount makes it easy to do, with no other significant modification to the kit parts.

The nozzle plate is a bayonet-mount affair, which takes the 6 plastic dress-ups and allows you to twist-lock or twist-unlock to remove as you please.

I created the nose bulkhead and plug to allow easy adjustment of nose weight, by adding steel BBs through the bulkhead hole. I used the kit&apos;s original putty, but placed the bulkhead so that I could increase weight as needed.

The RCS motor - ugly in this print; I can do a better job with a smaller nozzle, but haven&apos;t needed one yet - is there because, yeah, I&apos;m probably going to knock a few of these off the model.

Little Joe II Nozzle Plate, Nose Bulkhead, RCS for Estes 1/45 scale model

The Estes 1/45 scale Little Joe 2 is one beautiful model, but it has its issues. Even if you've solved the adhesive compatibility problems, you still risk melting the plastic dress-up nozzles when you launch it. One solution is to remove the nozzles before flying, and this mount makes it easy to do, with no other significant modification to the kit parts.

The nozzle plate is a bayonet-mount affair, which takes the 6 plastic dress-ups and allows you to twist-lock or twist-unlock to remove as you please.

I created the nose bulkhead and plug to allow easy adjustment of nose weight, by adding steel BBs through the bulkhead hole. I used the kit's original putty, but placed the bulkhead so that I could increase weight as needed.

The RCS motor - ugly in this print; I can do a better job with a smaller nozzle, but haven't needed one yet - is there because, yeah, I'm probably going to knock a few of these off the model.


DaVinci Jr Custom Nozzle

the front end of Cura 2.x with UM2 does not allow you to change the nozzle size beyond 0.8mm, but you can tweak the &quot;line width&quot; settings. Also the temperature is not easy to change without making a bunch of filament setting in the UM2 firmware. So these files can help get you started on tweaking setting to print nice vases like my sine wave vase. I have shared my CURA 2.x profiles for vase with a bottom and vase without. Start with the vase setting before going to the vaseBase.

calibration files UM2 with 2mm nozzle Cura2x vase mode

the front end of Cura 2.x with UM2 does not allow you to change the nozzle size beyond 0.8mm, but you can tweak the "line width" settings. Also the temperature is not easy to change without making a bunch of filament setting in the UM2 firmware. So these files can help get you started on tweaking setting to print nice vases like my sine wave vase. I have shared my CURA 2.x profiles for vase with a bottom and vase without. Start with the vase setting before going to the vaseBase.


This organizer is made for holding the wrench from the &quot;3dSolex Olsson Block&quot; and holds nozzles 0.20, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8, 1.0. 
A non-occupied screw hole indicates the size of the nozzle actually installed in the printer

The wrench from Anders Olsson can be found here: <a href="https://www.youmagine.com/designs/nozzle-torque-wrench" rel="external">https://www.youmagine.com/designs/nozzle-torque-wrench</a>.

<iframe width="593" height="370" src="//www.youtube.com/embed/wxNeOJ3Bybo" frameborder="0" allowfullscreen></iframe>

Source file NozzOrg-1.0.SLDPRT : 
<a href="https://grabcad.com/library/organizer-for-nozzles-with-olsson-torque-wrench-holder-1" rel="external">https://grabcad.com/library/organizer-for-nozzles-with-olsson-torque-wrench-holder-1</a>

Organizer for nozzles with Olsson torque wrench holder

This organizer is made for holding the wrench from the "3dSolex Olsson Block" and holds nozzles 0.20, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8, 1.0.
A non-occupied screw hole indicates the size of the nozzle actually installed in the printer

The wrench from Anders Olsson can be found here: https://www.youmagine.com/designs/nozzle-torque-wrench.



Source file NozzOrg-1.0.SLDPRT :
https://grabcad.com/library/organizer-for-nozzles-with-olsson-torque-wrench-holder-1


Thingscanner

Some articles you might like