Maker Bob Clagett just built an adorable Transformers prop. With the help of 3d printing, he created the "Matrix of Leadership" from Optimus Prime.

Make Your Own Optimus Prime Prop (and Save the Universe) | All3DP

With just some parts and a 3D printer, you can build an iconic Mini Commodore PET - with a retro greenish LED dot matrix to display the messages you want.

3D Print a Mini Commodore PET with A Working LED Screen | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>LED Matrix diffusion panel holder and LED Matrix connector for 64x32 RGB LED Matrix - 4mm pitch</p>
<p><a rel="nofollow" href="https://www.adafruit.com/product/2278">https://www.adafruit.com/product/2278</a></p>
<p><a rel="nofollow" href="https://www.adafruit.com/product/4749">https://www.adafruit.com/product/4749</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Inland+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        Inland PLA+                    </a>

                    Silver
</body></html>

LED Matrix diffusion panel holder 

LED Matrix diffusion panel holder and LED Matrix connector for 64x32 RGB LED Matrix - 4mm pitch

https://www.adafruit.com/product/2278

https://www.adafruit.com/product/4749

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>work in progress</p>
<p>Convert geprc mk4 arms to inverted X8 setup, spacers to adjust motor to motor distance.</p></div>
</body></html>

X8 GEPRC mk4 conversion

work in progress

Convert geprc mk4 arms to inverted X8 setup, spacers to adjust motor to motor distance.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Here is my version of Lightning Rifle from Matrix movie. It&apos;s designed based on screenshots and some pictures I found on the internet. Unfortunately I don&apos;t know the dimensions, and the total length at the moment is 75cm. </p>
<p>It comes in two versions. V1 is without pipes and wires so you can print the rifle and them mount real ones. V2 comes with wires and pipes for 3D printing, but it might not be as easy to print as v1. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Mk2</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I usually print in PLA with 20% infill and 0.2mm layer resolution. </p></div>
</body></html>

Matrix Lightning Gun

Here is my version of Lightning Rifle from Matrix movie. It's designed based on screenshots and some pictures I found on the internet. Unfortunately I don't know the dimensions, and the total length at the moment is 75cm. 

It comes in two versions. V1 is without pipes and wires so you can print the rifle and them mount real ones. V2 comes with wires and pipes for 3D printing, but it might not be as easy to print as v1. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Assembly of a clock with LED matrices, configured from a mobile phone via WiFi. This clock takes the date and time information through an NTP server, thus making it a very accurate clock. The clock is built from the ESP32 module, attaching a small 64x48 pixel (0.66 inch) OLED display and 4 8x8 pixel LED matrices.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A6</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        PLA PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>4 insert nuts and 4 M3 screws are needed.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/qCbrky6gtao" frameborder="0" allowfullscreen></iframe></p>
                <p class="detail-title"><strong>Information in spanish</strong></p>
                <div><p><a rel="nofollow" href="http://j-rpm.com/2020/10/reloj-de-precision-configurado-por-wifi/">http://j-rpm.com/2020/10/reloj-de-precision-configurado-por-wifi/</a></p></div>
</body></html>

Precision clock, configured by WiFi

Assembly of a clock with LED matrices, configured from a mobile phone via WiFi. This clock takes the date and time information through an NTP server, thus making it a very accurate clock. The clock is built from the ESP32 module, attaching a small 64x48 pixel (0.66 inch) OLED display and 4 8x8 pixel LED matrices.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Mounts for Adafruit Mini Magnet Feet (<a rel="nofollow" href="https://www.adafruit.com/product/4631">https://www.adafruit.com/product/4631</a>) to be used with 3M Command Strips.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>LulzBot</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Mini 2</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    transparent
</body></html>

Mini magnet foot mount

Mounts for Adafruit Mini Magnet Feet (https://www.adafruit.com/product/4631) to be used with 3M Command Strips.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Bracket to prevent flexing on large P5/P10 panels. Attach to a middle panel and attached to a cross member behind the panels.</p></div>
</body></html>

P5 L Bracket

Bracket to prevent flexing on large P5/P10 panels. Attach to a middle panel and attached to a cross member behind the panels.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Printed in PLA</p>
<p>I purchased some Solmore RGB Cabinet Lights (Model NO.:S-CL-003) and remixed the insides of the original matrix (<a rel="nofollow" href="/thing:326614">https://www.thingiverse.com/thing:326614</a>) to fit. Tolerances are tight so glue may not be needed. </p>
<p><strong>NOTE: You must have an IR remote (included in light pack) for this build to work.</strong></p>
<p>Disassemble the Solmore light and retain the screws holding the front cover to the battery pack. </p>
<p>1) Gently press the LED and battery pack into the Crystal. This is a tight fit. The ridge on the battery pack will prevent the LED from going in too far.<br>
2) Press the Crystal into the Front Ball.<br>
3) Press the Back Ball onto the Front Ball, align so that the flat sides allow for a tight seal.<br>
4) Insert the Arms into the grooves formed on top and bottom of the the constructed ball. Glue may be necessary to hold these in place.<br>
5) Insert the Screws from the original housing into the holes on the back ball and tighten into place. Be careful not to strip the holes.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Assorted+Silk+and+PETG&amp;tag=tv-auto-20" target="_blank">
                        Assorted Silk and PETG                    </a>

                    Assorted
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Supports are not necessary.</p></div>
</body></html>

Matrix of Leadership - Puck Light Remix

Printed in PLA

I purchased some Solmore RGB Cabinet Lights (Model NO.:S-CL-003) and remixed the insides of the original matrix (https://www.thingiverse.com/thing:326614) to fit. Tolerances are tight so glue may not be needed. 

**NOTE: You must have an IR remote (included in light pack) for this build to work.**

Disassemble the Solmore light and retain the screws holding the front cover to the battery pack. 

1) Gently press the LED and battery pack into the Crystal. This is a tight fit. The ridge on the battery pack will prevent the LED from going in too far. 
2) Press the Crystal into the Front Ball.
3) Press the Back Ball onto the Front Ball, align so that the flat sides allow for a tight seal.
4) Insert the Arms into the grooves formed on top and bottom of the the constructed ball. Glue may be necessary to hold these in place.
5) Insert the Screws from the original housing into the holes on the back ball and tighten into place. Be careful not to strip the holes.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p><strong>Download the .3mf file instead of the .stl file.</strong><br>
(The .3mf file is already set up correctly to test your printer&apos;s flow.)</p>
<ul><li>You must enable <strong>brim</strong> to hold the pieces together (10 lines should be enouth) and preferably set <strong>line width</strong> to <strong>0.4mm</strong>.</li>
<li>You should obtain at least one box with the surface fully filled but without an excess of filament. </li>
<li>If your print is well configured for your filament, you should get the best impression on the 9th box (1.00).</li>
<li>See the correction factor image to see how much you need to change the flow of your print.</li>
</ul><p><strong>Example: if your best impression is on the 0.70 box, you must correct the flow to 70%.</strong></p>
<p>Instructional video (in Portuguese - turn on subtitles if necessary)<br><a rel="nofollow" href="https://www.youtube.com/watch?v=nqgzjwpc9F8">https://www.youtube.com/watch?v=nqgzjwpc9F8</a></p>
<p>The original file was taken from Jasmine&apos;s GitHub<br><a rel="nofollow" href="https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix">https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix</a></p>
<p>Thanks to Jasmine Moreira!<br><a rel="nofollow" href="/jasminemoreira/designs">https://www.thingiverse.com/jasminemoreira/designs</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1 or 0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>0%</p></div>
<p></p>                                    
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I sliced this object using Ultimaker Cura.</p></div>
</body></html>

Flow Calibration Matrix (download the .3mf file)

**Download the .3mf file instead of the .stl file.**
(The .3mf file is already set up correctly to test your printer's flow.)

- You must enable **brim** to hold the pieces together (10 lines should be enouth) and preferably set **line width** to **0.4mm**.
- You should obtain at least one box with the surface fully filled but without an excess of filament. 
- If your print is well configured for your filament, you should get the best impression on the 9th box (1.00).
- See the correction factor image to see how much you need to change the flow of your print.

**Example: if your best impression is on the 0.70 box, you must correct the flow to 70%.**

Instructional video (in Portuguese - turn on subtitles if necessary)
https://www.youtube.com/watch?v=nqgzjwpc9F8

The original file was taken from Jasmine's GitHub
https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix

Thanks to Jasmine Moreira! 
https://www.thingiverse.com/jasminemoreira/designs

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Who is Otto DIY Eyes?</h3>
<p>For Otto lovers this the most emotional robot ever.</p>
<p>Thanks to our own developed LED &quot;Eyes&quot; combined with all te dance moves, touch sensor and sound gestures, you will be able to program your Otto to express multiple <a rel="nofollow" href="https://youtu.be/w7IcB6HTTqM">feelings, depending of the personality you want to give him/her...</a></p>
<h3><a rel="nofollow" href="https://www.ottodiy.com/store/products/445088">buy our full robot builder kit here!</a></h3>
<p>I recommend to first check all documentation for the green Otto DIY if you are a beginner and then you can try to play with more advanced features of this Otto DIY Humanoid<br><a rel="nofollow" href="https://wikifactory.com/+OttoDIY/eyes">Full documentation</a></p>
<h3>Coding <a rel="nofollow" href="https://www.ottodiy.com/#blockly">Use our Blockly for simple an easy graphical programming.</a></h3>
<h3>APP <a rel="nofollow" href="https://www.ottodiy.com/#app">Download for FREE here</a></h3>
<h3>Join the Otto Builder community and share your creativity!</h3>
<ol><li>&#xFEFF;<a rel="nofollow" href="https://builders.ottodiy.com/">Join the Otto Builder community here</a> </li>
<li><a rel="nofollow" href="https://www.facebook.com/groups/ottodiy/%EF%BB%BF">Group in Facebook</a>. to interact with the community and like our <a rel="nofollow" href="https://www.facebook.com/ottodiy/%EF%BB%BF">Facebook page</a></li>
<li><a rel="nofollow" href="https://www.youtube.com/c/ottodiy?sub_confirmation=1">&#xFEFF;Subscribe to our YouTube channel</a> for more how to videos and tutorials.</li>
<li><a rel="nofollow" href="https://www.instagram.com/ottodiy/%EF%BB%BF">Instagram</a> follow us and share #ottodiy tag @OttoDIY</li>
<li><a rel="nofollow" href="https://twitter.com/ottodiy%EF%BB%BF">Twitter</a> follow us and share #ottodiy mention @OttoDIY</li>
</ol><p>Be a part of this friendly community of robot builders, teachers and makers!<br>
Welcome to our Otto Builder community!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Prusament+PLA&amp;tag=tv-auto-20" target="_blank">
                        Prusament PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The Head must be in a light color or even transparent for the LED matrix to be visible the other parts can be in any color or material you want.</p></div>
</body></html>

Otto DIY Eyes

Who is Otto DIY Eyes?
===========
For Otto lovers this the most emotional robot ever.

Thanks to our own developed LED "Eyes" combined with all te dance moves, touch sensor and sound gestures, you will be able to program your Otto to express multiple [feelings, depending of the personality you want to give him/her...](https://youtu.be/w7IcB6HTTqM)

###[buy our full robot builder kit here!](https://www.ottodiy.com/store/products/445088)
I recommend to first check all documentation for the green Otto DIY if you are a beginner and then you can try to play with more advanced features of this Otto DIY Humanoid
[Full documentation](https://wikifactory.com/+OttoDIY/eyes)

###Coding [Use our Blockly for simple an easy graphical programming.](https://www.ottodiy.com/#blockly)

###APP [Download for FREE here](https://www.ottodiy.com/#app)

###Join the Otto Builder community and share your creativity!
1. ﻿[Join the Otto Builder community here](https://builders.ottodiy.com/) 
2. [Group in Facebook](https://www.facebook.com/groups/ottodiy/﻿). to interact with the community and like our [Facebook page](https://www.facebook.com/ottodiy/﻿)
3. [﻿Subscribe to our YouTube channel](https://www.youtube.com/c/ottodiy?sub_confirmation=1) for more how to videos and tutorials.
4. [Instagram](https://www.instagram.com/ottodiy/﻿) follow us and share #ottodiy tag @OttoDIY
5. [Twitter](https://twitter.com/ottodiy﻿) follow us and share #ottodiy mention @OttoDIY

Be a part of this friendly community of robot builders, teachers and makers!
Welcome to our Otto Builder community!

<p style="box-sizing: inherit; margin: 0px 0px 20px; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">Model dimensions:</p>

<ul style="box-sizing: inherit; color: rgb(72, 92, 102); font-family: " source sans pro", helvetica, sans-serif; font-size: 15px; text-align: justify;">
	<li style="box-sizing: inherit;">length &#x2013; 500.6 mm</li>
	<li style="box-sizing: inherit;">height &#x2013; 100.5 mm</li>
	<li style="box-sizing: inherit;">width - 98.7 mm</li>
</ul>


Matrix of Leadership from movie Transformers 2

Model dimensions:


	length – 500.6 mm
	height – 100.5 mm
	width - 98.7 mm



<p>Print one of each and put together.</p><p>All parts can be snap fitted with the exception of the arms which will need gluing or a dab of acetone.</p><p>I printed it with the following settings:</p><p>Battery pack back ball, frontball and battery door: orange PLA at 0.2mm layer height, 10% infill, 2 shells. Print the frontball with support, the rest without.</p><p>Arms: Gray or silver ABS at 0.2mm layer height, 10% infill, 2 shells with support.</p><p>Nubbin: Silver PLA at 0.1mm layer height, 15% infill, 2 shells, no support.</p><p>red part of nubbin: red PLA at 0.1mm layer height, 15% infill, 2 shells, no support but you may want to use a raft to make it easier to get it off without damaging it.</p><p>Partition clips: white PLA af 0.2mm layer height, 10% infill, 2 shells with support.</p><p>Centre crystal: Translucent blue at 0.2mm layer height, 10% infill, 2 shells with support.</p><p>For the LEDs, I bought a string of 10 LEDs on a battery pack (5 would probably have been better). I removed the wiring and connectors from the battery pack and put them into the battery pack back ball.</p><p>To assemble:</p><p>Push the red part of nubbin into the nubbin. This will be a very tight fit so won&apos;t need gluing.</p><p>Push the nubbin into the frontball. This will also be a very tight fit and may need some persuasion. The surface of the nubbin that meets up with the curved face of the frontball has been designed with the curvature of the ball so you may need to rotate it a little to be able to have a flush fit.</p><p>Push the centre crystal into the front ball, it has flat sides that help to do this and you shouldn&apos;t have to use much, if any force.</p><p>Push one of the partition clips into the front ball with the clips sticking out. Put your LEDs in and then put the other partition clip in place making sure that the wires for the LEDs is coming through the middle gap.</p><p>Make sure that you have wired up your printed battery pack with the on/off switch sticking out of the side and bunch up the extra wiring in the space provided. There is a very thin guide for the LED wires to go above the batteries and into the the front part.</p><p>Push the front and back together and they should clip into place and be held tightly.</p><p>Use Acetone or glue to put the arms on.</p>


Autobot Matrix of Leadership

Print one of each and put together.All parts can be snap fitted with the exception of the arms which will need gluing or a dab of acetone.I printed it with the following settings:Battery pack back ball, frontball and battery door: orange PLA at 0.2mm layer height, 10% infill, 2 shells. Print the frontball with support, the rest without.Arms: Gray or silver ABS at 0.2mm layer height, 10% infill, 2 shells with support.Nubbin: Silver PLA at 0.1mm layer height, 15% infill, 2 shells, no support.red part of nubbin: red PLA at 0.1mm layer height, 15% infill, 2 shells, no support but you may want to use a raft to make it easier to get it off without damaging it.Partition clips: white PLA af 0.2mm layer height, 10% infill, 2 shells with support.Centre crystal: Translucent blue at 0.2mm layer height, 10% infill, 2 shells with support.For the LEDs, I bought a string of 10 LEDs on a battery pack (5 would probably have been better). I removed the wiring and connectors from the battery pack and put them into the battery pack back ball.To assemble:Push the red part of nubbin into the nubbin. This will be a very tight fit so won't need gluing.Push the nubbin into the frontball. This will also be a very tight fit and may need some persuasion. The surface of the nubbin that meets up with the curved face of the frontball has been designed with the curvature of the ball so you may need to rotate it a little to be able to have a flush fit.Push the centre crystal into the front ball, it has flat sides that help to do this and you shouldn't have to use much, if any force.Push one of the partition clips into the front ball with the clips sticking out. Put your LEDs in and then put the other partition clip in place making sure that the wires for the LEDs is coming through the middle gap.Make sure that you have wired up your printed battery pack with the on/off switch sticking out of the side and bunch up the extra wiring in the space provided. There is a very thin guide for the LED wires to go above the batteries and into the the front part.Push the front and back together and they should clip into place and be held tightly.Use Acetone or glue to put the arms on.


Model dimensions:<br>
- diameter &#x2013; 44 mm<br>
- height &#x2013; 9.5 mm<br>
&#xA0;<br>
The model consists of parts: Outer part, Inner part, Disk.

Headjack from The Matrix 1999

Model dimensions:
- diameter – 44 mm
- height – 9.5 mm
 
The model consists of parts: Outer part, Inner part, Disk.

Thingscanner

Some articles you might like

Make Your Own Optimus Prime Prop (and Save the Universe) | All3DP

3D Print a Mini Commodore PET with A Working LED Screen | All3DP

Show Only

Looking for tag: matrix