We take a deep dive, looking at the Anycubic Kossel Linear Plus, its features, specs and where to get one. Read on, as we review all we know about this big delta 3D printer.

Anycubic Kossel Linear Plus: Review the Specs | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Cover and upper trigorilla board support for an Anycubic Delta printer.</p>
<p>Those are the things you will find:</p>
<ul><li>STL files for the board upper cover. You need to print 3 corners + 3 straights.</li>
<li>EPS files with all the panels to be laser-cut</li>
<li>Double 40mm fan support to cool the stepper drivers.</li>
</ul><p>Enjoy!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kossel</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=BQ+PLA&amp;tag=tv-auto-20" target="_blank">
                        BQ PLA                    </a>

                    Black
</body></html>

Anycubic Linear Cover

Cover and upper trigorilla board support for an Anycubic Delta printer.

Those are the things you will find:

-  STL files for the board upper cover. You need to print 3 corners + 3 straights.
- EPS files with all the panels to be laser-cut
- Double 40mm fan support to cool the stepper drivers.

Enjoy!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Ive been printing parts for and refurbishing my older Flsun Kossel mini. One of the parts that was broken was the fan holder for the hotend. This holder is also the mount point for the part cooling fan duct. Turns out that this part file is not on Thingiverse and was not included with the sd card. I spent days looking for the STL to print it and it is just not out there. </p>
<p>This is my recreation of the part. I used a set of calipers and tinker card to recreate it. This unit is a direct replacement for the unit that came on the printer. All the existing nuts and bolts should work on this part. (M3 bolts)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA                    </a>

                    Orange
</body></html>

FLSun Kossel Mini Hotend Fan Holder

Ive been printing parts for and refurbishing my older Flsun Kossel mini. One of the parts that was broken was the fan holder for the hotend. This holder is also the mount point for the part cooling fan duct. Turns out that this part file is not on Thingiverse and was not included with the sd card. I spent days looking for the STL to print it and it is just not out there. 

This is my recreation of the part. I used a set of calipers and tinker card to recreate it. This unit is a direct replacement for the unit that came on the printer. All the existing nuts and bolts should work on this part. (M3 bolts)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The previous holder broke, so I designed this to support the LCD box using two arms. Much stronger!</p>
<p>LCD box screw distance (center-to-center): 55mm<br>
1515 extrusion distance (center-to-center): 30mm</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Clone</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Herz+PLA&amp;tag=tv-auto-20" target="_blank">
                        Herz PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>With a 0.4mm nozzle, 2 vertical perimeters are more than enough.</p></div>
</body></html>

LCD panel holder for Kossel Mini

The previous holder broke, so I designed this to support the LCD box using two arms. Much stronger!

LCD box screw distance (center-to-center): 55mm
1515 extrusion distance (center-to-center): 30mm

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I was looking for a mouse pad tray that could mount to the arm of my office chair at home.  The best one for me was <a rel="nofollow" href="/thing:4574922">thing 4574922</a> from <a rel="nofollow" href="/lymanit/designs">lymanit</a>.  It was almost perfect, but for two problems specific to me.</p>
<p>First, my Anycubic Kossel Linear Plus does not have enough build plate to print his tray.  The corners were sticking out.  So I cut the bracket mating section out and made a 220mm round version that printed nicely on my delta.</p>
<ul><li>After printing it I decided to design an offset version as well.  It moves the mouse pad to the right, out of the way of the chair seat a bit.  I have not tested this one, but the mounting geometry is exactly the same.  Mirror it in your slicer for a left handed offset.</li>
</ul><p>Second, I felt that the bracket needed more support on my particular office chair.  So I extended it to add three more strap holes, while still fitting on the delta&apos;s build plate.  It&apos;s just under 206mm long.</p>
<ul><li>After assembling this one, I doubled the width of the strap holes in the model.  It should be easier to get your Velcro or lacing through.  My pictures show the smaller holes, before this change.</li>
</ul><p>It works well.  I&apos;m using it now, with a mousepad I had in my backpack, to write this summary.  This was a tight fit.  I didn&apos;t have to sand or cut, but it was tight.  I took off .25mm from each side before uploading the model, so hopefully you won&apos;t have that problem.</p>
<p>I do have a couple of modifications in mind for the &quot;maybe some day&quot; file.  It would be nice to make it tool-less and either quickly detachable, or foldable/collapsible.  I can already see myself mindlessly smashing it against my desk in the near future.</p>
<p><del>Also, an offset version of the round tray would be ideal.</del>  I made one!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kossel</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PETG&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print the round tray face down, like I have it in the stl file.  Use supports so that the screw holes come out decent.  Set &quot;Top Layers&quot; at 0 to save filament.  Set Infill to 20%, and &quot;Wall Thickness&quot; to 1.2mm for strength.  Infill normally doesn&apos;t matter much for strength, but in this case we are completely removing the bottom surface.</p>
<p>I printed the bracket on it&apos;s side, like I have it in the stl file.  I did not use supports.  The only part that may need them are the threaded screw holds, which would be impossible to get the support material out of.  I recommend 1.2mm Wall Thickness here as well.  Infill is not as important, so set it to whatever you think will let it make a solid top surface.  I used 20% here as well.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<div><p>I uploaded the stl files to Tinkercad and made my adjustments.  After exporting them I uploaded the new stl files to netfabb.com to make the models water tight.</p></div>
</body></html>

Chair Arm Mouse Pad Tray

I was looking for a mouse pad tray that could mount to the arm of my office chair at home.  The best one for me was [thing 4574922](https://www.thingiverse.com/thing:4574922) from [lymanit](https://www.thingiverse.com/lymanit/designs).  It was almost perfect, but for two problems specific to me.

First, my Anycubic Kossel Linear Plus does not have enough build plate to print his tray.  The corners were sticking out.  So I cut the bracket mating section out and made a 220mm round version that printed nicely on my delta.

- After printing it I decided to design an offset version as well.  It moves the mouse pad to the right, out of the way of the chair seat a bit.  I have not tested this one, but the mounting geometry is exactly the same.  Mirror it in your slicer for a left handed offset.

Second, I felt that the bracket needed more support on my particular office chair.  So I extended it to add three more strap holes, while still fitting on the delta's build plate.  It's just under 206mm long.

- After assembling this one, I doubled the width of the strap holes in the model.  It should be easier to get your Velcro or lacing through.  My pictures show the smaller holes, before this change.

It works well.  I'm using it now, with a mousepad I had in my backpack, to write this summary.  This was a tight fit.  I didn't have to sand or cut, but it was tight.  I took off .25mm from each side before uploading the model, so hopefully you won't have that problem.

I do have a couple of modifications in mind for the "maybe some day" file.  It would be nice to make it tool-less and either quickly detachable, or foldable/collapsible.  I can already see myself mindlessly smashing it against my desk in the near future.

~~Also, an offset version of the round tray would be ideal.~~  I made one!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Had some issues with a version downloaded here. Didn&apos;t fit properly.<br>
So made a new one.</p>
<p>Added a spot to place a microswitch for Filament detection</p>
<p>For gearbox extruder</p>
<p>16mm bearing<br>
12mm Extruder gear.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kossel mini (clone)</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=no+brand+ABS&amp;tag=tv-auto-20" target="_blank">
                        no brand ABS                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Supports needed</p></div>
</body></html>

Kossel Mini Extruder (Gearbox)

Had some issues with a version downloaded here. Didn't fit properly.
So made a new one.

Added a spot to place a microswitch for Filament detection

For gearbox extruder

16mm bearing
12mm Extruder gear.

<p>You will need to print 3 sets of these braces. Each brace has a relief channel in the back to take a wire (from an end-stop, for example).<br><br>Use these in conjunction with turnbuckles and spectra / kevlar / steel line to help stop the frame of your Kossel from twisting.<br><br>I have got these fitted to the machine, but the Kevlar line that I was using was too thin and snapped. I will try again with spectra line.<br><br>There is a bit of flex in the brackets when printed at 60% infil, but it has to be an improvement on the original setup.</p>


Kossel Cross Brace Brackets

You will need to print 3 sets of these braces. Each brace has a relief channel in the back to take a wire (from an end-stop, for example).Use these in conjunction with turnbuckles and spectra / kevlar / steel line to help stop the frame of your Kossel from twisting.I have got these fitted to the machine, but the Kevlar line that I was using was too thin and snapped. I will try again with spectra line.There is a bit of flex in the brackets when printed at 60% infil, but it has to be an improvement on the original setup.


Bracket for Kossel power supply

<p>Still under development, but hopefully will help improving delta accuracy.</p>


Raised-hotend effector with magnetic joints

Still under development, but hopefully will help improving delta accuracy.


<p>I could not find an LCD mount quite like what I wanted, so I created this. It&apos;s a simple mount that fits onto 1515 extrusions. I used it to mount my smart LCD at the top of my Mini Kossel. There is proper clearance for the SD reader too!</p>


Smart LCD Controller Mount for Mini Kossel

I could not find an LCD mount quite like what I wanted, so I created this. It's a simple mount that fits onto 1515 extrusions. I used it to mount my smart LCD at the top of my Mini Kossel. There is proper clearance for the SD reader too!


<p>I wanted to be able to use a blower fan for more efficient cooling, so I designed this. I made two versions - one fits over the auto-level probe&apos;s feet, and the other can be mounted by itself (indep.). Being mounted between the arms, it does not affect the movement of the effector. I have already gotten some amazing results with this, my old pair of 120mm fans just do not compare to this little blower!&#xA0;</p><p>I printed with 0.2 mm layer height, 100% infill, supports and brim. Be sure to check the supports your slicer generates - Cura made some not so great supports depending on where the part was on the plate. I printed two at once to make sure the layers had enough time to cool.</p><p>(Note - my hotend is insulated with ceramic insulation, I would recommend insulating your hotend to prevent energy loss due to the blower, or use some sort of duct. I am working on a duct that does not impact the high airflow of the blower.)</p>


Blower Fan Mount for Mini Kossel Effector

I wanted to be able to use a blower fan for more efficient cooling, so I designed this. I made two versions - one fits over the auto-level probe's feet, and the other can be mounted by itself (indep.). Being mounted between the arms, it does not affect the movement of the effector. I have already gotten some amazing results with this, my old pair of 120mm fans just do not compare to this little blower! I printed with 0.2 mm layer height, 100% infill, supports and brim. Be sure to check the supports your slicer generates - Cura made some not so great supports depending on where the part was on the plate. I printed two at once to make sure the layers had enough time to cool.(Note - my hotend is insulated with ceramic insulation, I would recommend insulating your hotend to prevent energy loss due to the blower, or use some sort of duct. I am working on a duct that does not impact the high airflow of the blower.)


When you use a closed loop belt the zigzag on the carriage shorten the length of the belt to avoid this I&apos;ve mixed the original carriage and removed the zigzag and added a belt clamp. This has been done by so many than no credit to me just a bit of tinkering. &#xA0;&#xA0;<br>This thing was made with Tinkercad. Edit it online <a href="https://www.tinkercad.com/things/1HwEExfjDWP" rel="external">https://www.tinkercad.com/things/1HwEExfjDWP</a>


Kossel Mini custom carriage for closed loop belt

When you use a closed loop belt the zigzag on the carriage shorten the length of the belt to avoid this I've mixed the original carriage and removed the zigzag and added a belt clamp. This has been done by so many than no credit to me just a bit of tinkering.   This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1HwEExfjDWP


<p>This mount allow you put your arduino mega and ramp 1.4 shield under the build plate making the kossel wiring hidden.&#xA0;<br><br>This thing is mixed from the Think3DPrint3D electronic mount that can be found on this git repo. <a href="https://github.com/T3P3/kossel/blob/master/T3P3_additions/T3P3_electronics_mount.stl" rel="external">https://github.com/T3P3/kossel/blob/master/T3P3_additions/T3P3_electronics_mount.stl</a> &#xA0;<br><br>NOTE: Only T3P3 can make money by reselling this item. &#xA0;<br>I use Astrosyn Nema dampener and the original part orientation didn&apos;t allow me to plug the usb cable. &#xA0;<br>This thing was made with Tinkercad. Edit it online <a href="https://www.tinkercad.com/things/bB0U4k6RzSh" rel="external">https://www.tinkercad.com/things/bB0U4k6RzSh</a></p>


Kossel mini Arduino/Ramp1.4 mount

This mount allow you put your arduino mega and ramp 1.4 shield under the build plate making the kossel wiring hidden. This thing is mixed from the Think3DPrint3D electronic mount that can be found on this git repo. https://github.com/T3P3/kossel/blob/master/T3P3_additions/T3P3_electronics_mount.stl  NOTE: Only T3P3 can make money by reselling this item.  I use Astrosyn Nema dampener and the original part orientation didn't allow me to plug the usb cable.  This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bB0U4k6RzSh


Thingscanner

Some articles you might like

Anycubic Kossel Linear Plus: Review the Specs | All3DP

Show Only

Looking for tag: kossel