Name: Christmas Sleigh Decor/Planter
Brand: mikefivetango
Availability: InStock

Farmshelf uses Ultimaker 3D printed parts for smart indoor urban farming units so we can grow fresh veggies in the city.

Farmshelf Uses 3D Printed Parts For Smart Indoor Urban Farming | All3DP

After nine days of continuous 3D printing the Create Cafe team over in Saskatoon, Canada, has successfully completed the world's largest indoor 3D print. Called the Wave, the camper trailer is an exciting project that highlights big and ambitious prints needn't be confined to the factory floor.

[Update: They Did It!] World's Largest 3D Printed Camper Trailer Will be Live-streamed | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Super simple and small propagation cup with drainage holes. Quick and easy to print!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.28</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=inland+Pla&amp;tag=tv-auto-20" target="_blank">
                        inland Pla                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Used some inland 1.75mm pla+ black filament and printed 4 cups in about 4 hours.</p></div>
</body></html>

Small and Simple propagation cup with drainage hole

Super simple and small propagation cup with drainage holes. Quick and easy to print!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Plantero</h3>
<hr><h3>Self-watering planter</h3>
<p>Plantero is a self-watering planter with a modern design and clean look. It has a double layer walls that serves as a reservoir for your plants that feeds them from the bottom.</p>
<h3>Dimensions</h3>
<ul><li>Height: 90mm / 3.54&quot;</li>
<li>Diameter: 100mm / 3.93&quot;</li>
</ul><hr><h3>Finishing</h3>
<p>You can use your Plantero right after your printing finishes. But if you want an even better finishing you can follow this steps.</p>
<p>*This steps also works if you have smalls leaks between your layers.</p>
<ol><li>Sand it with incremental grit, you can start from 80 and finish it with 200 to 400. It is recommended to use wet sanding in the higher grit</li>
<li>Use spray filler primer to smooth the faces even more (I used Rustoleum and it work perfect)</li>
<li>Sand it again with a very fine grit. 200-400 again is ok.</li>
<li>Paint it with a finishing layer of your favourite color (I used Rustoleum here again and the finishing was perfect) </li>
<li>Enjoy</li>
</ol><hr><h3>Recomendations</h3>
<ul><li>Fill a layer of pebbles at the bottom of the planter and then put the soil with a little compaction</li>
<li>Check the soil constantly. If you put too much water it can damage your plants and the soil</li>
<li>If you print the Plantero with PLA be careful with exposing it to the sun. It can damage  and deform it and it could decolorate</li>
</ul><hr><h3>Changelog</h3>
<ul><li>V1.0: Plantero</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Hypercube evolution</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><ul><li>PLA works really nice</li>
<li>You can add more bottom layers for an even more water tight planter</li>
<li>Same with walls, you can reduce the width of your printing in order to increase the walls layers</li>
</ul></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/41/ab/51/dd/5d/photo_2020-11-07_11-22-59.jpg"></p>
</body></html>

Plantero - Self-Watering planter

# Plantero
---
### Self-watering planter

Plantero is a self-watering planter with a modern design and clean look. It has a double layer walls that serves as a reservoir for your plants that feeds them from the bottom.

### Dimensions

- Height: 90mm / 3.54"
- Diameter: 100mm / 3.93"

---

### Finishing

You can use your Plantero right after your printing finishes. But if you want an even better finishing you can follow this steps.

*This steps also works if you have smalls leaks between your layers.

1. Sand it with incremental grit, you can start from 80 and finish it with 200 to 400. It is recommended to use wet sanding in the higher grit
2. Use spray filler primer to smooth the faces even more (I used Rustoleum and it work perfect)
3. Sand it again with a very fine grit. 200-400 again is ok.
4. Paint it with a finishing layer of your favourite color (I used Rustoleum here again and the finishing was perfect) 
5. Enjoy

---

### Recomendations

- Fill a layer of pebbles at the bottom of the planter and then put the soil with a little compaction
- Check the soil constantly. If you put too much water it can damage your plants and the soil
- If you print the Plantero with PLA be careful with exposing it to the sun. It can damage  and deform it and it could decolorate

---

### Changelog

- V1.0: Plantero

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This object was made in Tinkercad. Edit it online <a rel="nofollow" href="https://www.tinkercad.com/things/fh44Ppj0aoS">https://www.tinkercad.com/things/fh44Ppj0aoS</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>E10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>Solid</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=PLA++PLA&amp;tag=tv-auto-20" target="_blank">
                        PLA  PLA                    </a>

                    N/A
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>N/A</p></div>
</body></html>

Indoor_3mm

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/fh44Ppj0aoS

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Version one is designed for single filament printers.<br>
Version two (MMU) is designed for multi material printers.</p>
<p>Help support my design work by visiting my referral links:<br>
Upland referral (virtual property trading game): <a rel="nofollow" href="https://r.upland.me/qk9X">https://r.upland.me/qk9X</a><br>
Brave Browser referral: <a rel="nofollow" href="https://brave.com/tod573">https://brave.com/tod573</a></p>
<p>Visit my website: <a rel="nofollow" href="https://StarLabs3D.com">https://StarLabs3D.com</a></p>
<p>My YouTube: <a rel="nofollow" href="https://www.youtube.com/c/ToddOlsen">https://www.youtube.com/c/ToddOlsen</a></p>
<p><strong><em>See video below</em></strong></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3 MK3 MMU 2</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Light Blue, Pink
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p><a rel="nofollow" href="https://www.youtube.com/watch?v=mKMpMWx0Xa4">https://www.youtube.com/watch?v=mKMpMWx0Xa4</a></p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/mKMpMWx0Xa4" frameborder="0" allowfullscreen></iframe></p>
                <p class="detail-caption">https://www.youtube.com/c/ToddOlsen</p>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/1e/8c/5f/bf/4b/Crypto_Tip_Image.jpg"></p>
                <p class="detail-caption"><strong>https://StarLabs3D.com</strong></p>
</body></html>

Watering Can

Version one is designed for single filament printers.
Version two (MMU) is designed for multi material printers.

Help support my design work by visiting my referral links:
Upland referral (virtual property trading game): https://r.upland.me/qk9X
Brave Browser referral: https://brave.com/tod573

Visit my website: https://StarLabs3D.com

My YouTube: https://www.youtube.com/c/ToddOlsen

***See video below***


<html><head></head><body><div class="text-auto-link">
                                            <p>Adjust the size of these prints to accomadate any and all kinds of plants, herbs, produce, with a modern presentation. The planter box comes with a small hole at the very bottom so soil will not become saturated. The tray then holds any excess water.&#xA0;</p>
										</div>
                                    								</body></html>

planter box - variable size

 Adjust the size of these prints to accomadate any and all kinds of plants, herbs, produce, with a modern presentation. The planter box comes with a small hole at the very bottom so soil will not become saturated. The tray then holds any excess water. 

<html><head></head><body><div class="text-auto-link">
                                            <p>Strait forward print to help posture plants. Adjust scale to suit your needs.&#xA0;</p>
										</div>
                                    								</body></html>

Garden stake

 Strait forward print to help posture plants. Adjust scale to suit your needs. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is a small 3d printed led light i made for my vegetables houseplant.</p>
<p>This project is also hosted on <a href="https://hackaday.io/project/170979-high-efficiency-and-cheap-led-grow-light">hackaday</a> and <a href="https://www.instructables.com/id/30-3D-Printed-Efficient-Led-Grow-Light/">instructables</a> is available</p>
<p><br>Designed to be as cheap as possible and let you grow your own food, but to give the maximum efficiency and don&#xB4;t involve any soldering. It&apos;s perfect to raise not very light demanding plants or for early stages, i&apos;m sure it also can be used for photography, hydroponics, aquaponics, any kind of indoor setup and anything else you got in mind!</p>
<p>This light consists of 4x bridgelux BXEB L0280 led bars which are driven by a Meanwell driver in parallel with two options:</p>
<p>APC 35 - 1050: driving each bar at 1.05A/4 = 262,25 mA.Gives us a total power at 20v of around 1.05*20 = 21W<br>LPC 60 - 1400: driving each bar at 1.4A/4 = 350 mA. Gives us a total power at 20v of around 1.4*20 = 28W</p>
<p><br>Compared to commercially available solutions, has a lumen output similar to a HLG 65 vegging board, efficiency close to DIY COB leds (Vero, CXB3590, Citizen... ) but with a higher coverage area. Nothing to do with other cheap solutions as 5050 led strips, chinese amazon lights or e27 bulbs.</p>
<p>Max drive current of the boards its 700mA so we are always under half of the current with any of the boards, so heatsink isn&apos;t mandatory. At the current used they have a 180 lm/w efficiency, not bad at all for they price.</p>
<p>APC variant has been tested for over two months already and hasn&apos;t show any problem, LPC variant has not been tested, because i don&apos;t have the driver, but i made the model also because i thought like its so if somebody build it any feedback would be very welcomed! 3d files available at thingiverse and myminifactory</p>
<p>Always wear sunglasses when looking at this leds! never put them in a place where you can have direct vision of them.</p>
<p>This lamp is working for me, but I am not in any way electrician and i can&apos;t assure this is complient with all security directives, always double check all connections, think on your own if everything is safe. Design is not fully isolated so use in humid spaces it&apos;s not recommended, i am not responsible in any way of material or personal damages caused for misuse, bad mount, or anything else derived from this model.</p>
<p>Size of each piece is 7.2 mm to be printable in any printer and made to fit 200mmx200mm printers, probably could be printed thinner, for that just scale that axis.<br> All four sides are the same so you need to print:<br> -For apc driver:<br> 4x side<br> 1x apc<br> 2x Wago_apc<br> -For LPC driver<br> 4x Side<br> 1x LPC<br> 1x Wago_LPC</p>
<p>LPC version has not been tested so if somebody can test it and offered feedback i can modify the STL, also if somebody wants original files i can provide them.</p>
										</div>
										
                                    								</body></html>

Best DIY Led grow light fully 3dprinted for $30

 This is a small 3d printed led light i made for my vegetables houseplant. This project is also hosted on hackaday and instructables is available Designed to be as cheap as possible and let you grow your own food, but to give the maximum efficiency and don´t involve any soldering. It's perfect to raise not very light demanding plants or for early stages, i'm sure it also can be used for photography, hydroponics, aquaponics, any kind of indoor setup and anything else you got in mind! This light consists of 4x bridgelux BXEB L0280 led bars which are driven by a Meanwell driver in parallel with two options: APC 35 - 1050: driving each bar at 1.05A/4 = 262,25 mA.Gives us a total power at 20v of around 1.05*20 = 21WLPC 60 - 1400: driving each bar at 1.4A/4 = 350 mA. Gives us a total power at 20v of around 1.4*20 = 28W Compared to commercially available solutions, has a lumen output similar to a HLG 65 vegging board, efficiency close to DIY COB leds (Vero, CXB3590, Citizen... ) but with a higher coverage area. Nothing to do with other cheap solutions as 5050 led strips, chinese amazon lights or e27 bulbs. Max drive current of the boards its 700mA so we are always under half of the current with any of the boards, so heatsink isn't mandatory. At the current used they have a 180 lm/w efficiency, not bad at all for they price. APC variant has been tested for over two months already and hasn't show any problem, LPC variant has not been tested, because i don't have the driver, but i made the model also because i thought like its so if somebody build it any feedback would be very welcomed! 3d files available at thingiverse and myminifactory Always wear sunglasses when looking at this leds! never put them in a place where you can have direct vision of them. This lamp is working for me, but I am not in any way electrician and i can't assure this is complient with all security directives, always double check all connections, think on your own if everything is safe. Design is not fully isolated so use in humid spaces it's not recommended, i am not responsible in any way of material or personal damages caused for misuse, bad mount, or anything else derived from this model. Size of each piece is 7.2 mm to be printable in any printer and made to fit 200mmx200mm printers, probably could be printed thinner, for that just scale that axis. All four sides are the same so you need to print: -For apc driver: 4x side 1x apc 2x Wago_apc -For LPC driver 4x Side 1x LPC 1x Wago_LPC LPC version has not been tested so if somebody can test it and offered feedback i can modify the STL, also if somebody wants original files i can provide them. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This is a two-part self-watering planter. Each piece is 50 mm tall and 100 mm wide. Together they form a 100 mm cube. The bottom part is filled with water. The top piece uses cotton strings to draw water from the bottom piece into the soil of the top piece. The purpose of this project is to teach students about how plants grow.</p>
<p>How I designed this: I used Autodesk Fusion 360 as my design software. I designing the bottom piece first. I drew a 100 mm square and extruded it 50 mm. I then shelled it 5 mm inwards. Next, I made a sketch at the top and extruded it to make a rim. Next I added a new component and made a 50 mm tall square on top of the last piece. I then extruded a square inside the piece and used a circular pattern sketch to create the holes. Finally, I used a voronoi sketch generator plugin to create the voronoi patterning on the bottom piece.</p>
<h6 class="detail-title">&#xA0;</h6>
<p class="detail-title"><strong>Project: Self-Watering Voronoi Planter</strong></p>
<p>Overview: The objective of this project is to introduce your students to botany and hydroponics. Your students will also learn about capillary action. This is intended for elementary and middle school students in a science or biology class; however, anyone can participate. This project does not require any skill or prior knowledge.</p>
<p>Lesson: After you have printed the self-watering planter for your students you are going to demonstrate how it works. Tie cotton strings to the holes in the top piece of the planter making sure the strings are long enough to reach the bottom of the planter. Wet the strings and fill the bottom piece about half way. Fill the top piece with soil, plant the seeds, and water the soil. Capillary action in the string will replenish the soil with water. Place the planters by the window sill and let the seeds do their work! While you wait for the seeds to germinate you can teach your students about germination and photosynthesis. How in depth you go into both topics is up to you. The plant seeds you choose are also up to you. Remember to check the water levels every few days.</p>
<p>Duration: The duration of this lab is as long as it takes for the seeds to germinate and grow plus the time it takes to print the planter. It will take a few weeks but it does not require a lot of work.</p>
<p>Rubric and Assessment: How students are graded is up to the instructor. I recommend grading them on the health of their plant plus a quiz on what they were taught.</p>
										</div>
										
                                    								</body></html>

Self-Watering Planter

 This is a two-part self-watering planter. Each piece is 50 mm tall and 100 mm wide. Together they form a 100 mm cube. The bottom part is filled with water. The top piece uses cotton strings to draw water from the bottom piece into the soil of the top piece. The purpose of this project is to teach students about how plants grow. How I designed this: I used Autodesk Fusion 360 as my design software. I designing the bottom piece first. I drew a 100 mm square and extruded it 50 mm. I then shelled it 5 mm inwards. Next, I made a sketch at the top and extruded it to make a rim. Next I added a new component and made a 50 mm tall square on top of the last piece. I then extruded a square inside the piece and used a circular pattern sketch to create the holes. Finally, I used a voronoi sketch generator plugin to create the voronoi patterning on the bottom piece. Project: Self-Watering Voronoi Planter Overview: The objective of this project is to introduce your students to botany and hydroponics. Your students will also learn about capillary action. This is intended for elementary and middle school students in a science or biology class; however, anyone can participate. This project does not require any skill or prior knowledge. Lesson: After you have printed the self-watering planter for your students you are going to demonstrate how it works. Tie cotton strings to the holes in the top piece of the planter making sure the strings are long enough to reach the bottom of the planter. Wet the strings and fill the bottom piece about half way. Fill the top piece with soil, plant the seeds, and water the soil. Capillary action in the string will replenish the soil with water. Place the planters by the window sill and let the seeds do their work! While you wait for the seeds to germinate you can teach your students about germination and photosynthesis. How in depth you go into both topics is up to you. The plant seeds you choose are also up to you. Remember to check the water levels every few days. Duration: The duration of this lab is as long as it takes for the seeds to germinate and grow plus the time it takes to print the planter. It will take a few weeks but it does not require a lot of work. Rubric and Assessment: How students are graded is up to the instructor. I recommend grading them on the health of their plant plus a quiz on what they were taught. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Never worry about killing your plant again! Simply fill the resevoir and your plant will water itself! (just remember to check the water level once a week).</p>
<p>I designed this planter to be easy for 3D printing. No supports. No rafts. And most importantly, no leaking!</p>
<p>Planter: PLA<br> Resevoir : PETG</p>
<p>IMPORTANT: Tune your PETG with a calibration cube first. I found 200 micron to be the best layer height</p>
										</div>
										
                                    								</body></html>

Self-watering Planter 3

 Never worry about killing your plant again! Simply fill the resevoir and your plant will water itself! (just remember to check the water level once a week). I designed this planter to be easy for 3D printing. No supports. No rafts. And most importantly, no leaking! Planter: PLA Resevoir : PETG IMPORTANT: Tune your PETG with a calibration cube first. I found 200 micron to be the best layer height 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>This lamp is almost whole 3D printed, including the light diffuser other parts cost about 10$. It has lots of preconfigured, light animation effects and static light colors with autoplay loop feature. Lamp stores last used setting to the internal memory, so it could be configured once and used like usual lamp with power switcher. No app required, it could be controlled by using any device where browser is available. It also can operate in 2 modes, as standalone and part of home WiFi network.&#xA0;</p>
<p>Demonstartion of the web interface for it could be found here:&#xA0;<a href="https://www.youtube.com/watch?v=HouHpI9_oLA">https://www.youtube.com/watch?v=HouHpI9_oLA</a></p>
<p>Detailed assembly and step by step instructions with code, are hosted in my instuctable&#xA0;https://www.instructables.com/id/DIY-WiFi-RGB-LED-Soft-Lamp/</p>
<p>Supplies:<br>&#x2022; 1 x Double Side Prototype PCB 4*6 cm</p>
<p>&#x2022; 1 x HLK-PM01 AC-DC 220V to 5V Step-Down Power Supply Module or something similar</p>
<p>&#x2022; 1 x Wemos D1 Mini WiFi Development Board Micro USB</p>
<p>&#x2022; RGB I2C LED strip with 60 LEDs/m</p>
<p>&#x2022; 4 x M3 nuts</p>
<p>&#x2022; 2 x M3x6 screws</p>
<p>&#x2022; 5 x M3x12 screws</p>
<p>&#x2022; power cord with plug and switcher on it</p>
<p>&#x2022; some jumper wires</p>
<p>&#x2022; 3 x header pins</p>
<p>&#x2022; soldering tools</p>
<p>&#x2022; 3D printer with Clear and Black filament</p>
										</div>
										
                                    								</body></html>

DIY WiFi RGB LED Soft Lamp

 This lamp is almost whole 3D printed, including the light diffuser other parts cost about 10$. It has lots of preconfigured, light animation effects and static light colors with autoplay loop feature. Lamp stores last used setting to the internal memory, so it could be configured once and used like usual lamp with power switcher. No app required, it could be controlled by using any device where browser is available. It also can operate in 2 modes, as standalone and part of home WiFi network. Demonstartion of the web interface for it could be found here: https://www.youtube.com/watch?v=HouHpI9_oLA Detailed assembly and step by step instructions with code, are hosted in my instuctable https://www.instructables.com/id/DIY-WiFi-RGB-LED-Soft-Lamp/ Supplies:• 1 x Double Side Prototype PCB 4*6 cm • 1 x HLK-PM01 AC-DC 220V to 5V Step-Down Power Supply Module or something similar • 1 x Wemos D1 Mini WiFi Development Board Micro USB • RGB I2C LED strip with 60 LEDs/m • 4 x M3 nuts • 2 x M3x6 screws • 5 x M3x12 screws • power cord with plug and switcher on it • some jumper wires • 3 x header pins • soldering tools • 3D printer with Clear and Black filament 

<p>This abstract planter will make your unique succulents the center of attention. It does have a drainage hole to prevent over watering.</p>


Abstract Planter

This abstract planter will make your unique succulents the center of attention. It does have a drainage hole to prevent over watering.


<p>A cute Santa&apos;s sleigh perfect for use as a planter or just as Christmas decor.</p>

<p>Included in the files is two different types of body. If you want to use the design as a planter, then use the &apos;BodyWithDrainage&apos; file as it includes a few drainage holes. &apos;Body&apos; is a solid body without any drainage holes.</p>

<p>Assembly instructions can be found at <a href="https://blog.mikefivetango.com/2019/12/07/christmas-sleigh-3d-printed/" rel="external">https://blog.mikefivetango.com/2019/12/07/christmas-sleigh-3d-printed/</a></p>


Christmas Sleigh Decor/Planter

A cute Santa's sleigh perfect for use as a planter or just as Christmas decor.

Included in the files is two different types of body. If you want to use the design as a planter, then use the 'BodyWithDrainage' file as it includes a few drainage holes. 'Body' is a solid body without any drainage holes.

Assembly instructions can be found at https://blog.mikefivetango.com/2019/12/07/christmas-sleigh-3d-printed/


Thingscanner

Some articles you might like

Farmshelf Uses 3D Printed Parts For Smart Indoor Urban Farming | All3DP

[Update: They Did It!] World's Largest 3D Printed Camper Trailer Will be Live-streamed | All3DP

Show Only

Looking for tag: indoor