Algorithm developed by engineering researchers at University of Michigan allows desktop 3D printers to boost speed without impacting quality.

New Algorithm Cuts 3D Printing Times by Half | All3DP

WASP was founded to 3D print homes from 100% natural resources. With 3D printed concrete, they could cut Carbon Dioxide emissions in half.

50% Reduction in CO2 Emissions with 3D Printed Concrete | All3DP

Leap forward with technology: Audi has used metal 3D printing technology to create a half-scale replica of the 1936 Auto Union Typ C.

Audi 3D Prints a Scale Replica of a 1936 Grand Prix Race Car | All3DP

Driven by sales of their flagship Zortrax M200, the Polish 3D printer manufacturer had a record $6.7M turnover in the first half of 2016.

Zortrax Made Over $1.9M Profit in First Half of 2016 | All3DP

We tested out the Mycusini chocolate 3D printer. Does it deserve a chef’s kiss or is it half-baked? Check out this review for our take.

Mycusini Chocolate 3D Printer Review: A Real Treat | All3DP

3D printed Valentine's gifts are sure to delight! Read on to see 25 great Valentine's Day 3D prints, from hearts to flowers to jewelry!

3D Printed Valentine's Gifts: 25 Prints for Your Other Half | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a remix of halfling team catchers made by Amochris.<br>
I refine the mesh and correct it to be printed on SLA printers.<br>
I add some details for realism.</p>
<p>You may find the 3D with or without supports. They are already scaled to 125% from the original files to suit better my wishes. You may compare the height with the human player on the picture.</p>
<p>Leave a comment if you like them and I will see to remesh the other players to make a complete team.<br>
Any supports is for that. Making this is quite time consuming for a beginner as me, and test printing demands a lot of resin.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Elegoo Mars 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.02</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=resin+water+washable+grey+resin&amp;tag=tv-auto-20" target="_blank">
                        resin water washable grey resin                    </a>

                    grey
</body></html>

Halfling catchers Blood Bowl

This is a remix of halfling team catchers made by Amochris.
I refine the mesh and correct it to be printed on SLA printers.
I add some details for realism.

You may find the 3D with or without supports. They are already scaled to 125% from the original files to suit better my wishes. You may compare the height with the human player on the picture.

Leave a comment if you like them and I will see to remesh the other players to make a complete team.
Any supports is for that. Making this is quite time consuming for a beginner as me, and test printing demands a lot of resin.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Professor Snape</p></div>
</body></html>

Professor Severus Snape stencil

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a replica of the classic figure #6 from the Grenadier box Specialists number 2006.<br>
(see <a rel="nofollow" href="http://www.dndlead.com/grenadier/ADandD/2006.jpg">http://www.dndlead.com/grenadier/ADandD/2006.jpg</a> )</p>
<p>Scan made using<br><a rel="nofollow" href="/thing:1762299">https://www.thingiverse.com/thing:1762299</a></p>
<p>&quot;Assassin&quot;</p>
<p>He looks like a half-orc to me, but who knows?</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Maker Ultimate</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eryone+PLA&amp;tag=tv-auto-20" target="_blank">
                        eryone PLA                    </a>

                    grey
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I printed mine at 115%, but he came out a little big. Another one at 100% was too small. Try 110%.<br>
Set Z = -0.25mm for best bottom.<br>
I used support blocker around the head as shown.</p></div>
</body></html>

Replica of Grenadier Specialists 2006 #8 Miniature

This is a replica of the classic figure #6 from the Grenadier box Specialists number 2006.
(see http://www.dndlead.com/grenadier/ADandD/2006.jpg )

Scan made using
https://www.thingiverse.com/thing:1762299

"Assassin"

He looks like a half-orc to me, but who knows?

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>50mm Radius Half Ball Test Object</p></div>
</body></html>

50mm Radius Half Ball Test Object

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><iframe width="560" height="315" src="https://www.youtube.com/embed/d8OSGa01W3I" frameborder="0" allowfullscreen="allowfullscreen"></iframe>
<p>link to Github for arduino code and stuff.<br><a rel="nofollow" href="https://github.com/Lunchbox7985/Portal-Gun">https://github.com/Lunchbox7985/Portal-Gun</a></p>
<p>This only includes the modified parts, you still need to download the original.<br><a rel="nofollow" href="/thing:3579224">https://www.thingiverse.com/thing:3579224</a></p>
<p>The first 7 pieces replace parts in the original, so obviously dont print the originals of those. 8-11 are in addition to everything else, the 3 pieces to the stand are optional (but you know you want to proudly display this right?)</p>
<p>The changes i made to this are minor compared to the original, and mainly to house the electronics.</p>
<p>1 Generator : added speaker mounts and grills<br>
2Collector : Added holes for the 3 red LEDs at the front of the gun, and widened the hole to use the acrylic rod listed instead of a glue stick<br>
3 Generator Hatch : heavy modification for added switches, include right and left handed version. Left hand version puts the buttons for cancel portal, and the song to the right for easier access via your thumb, and the power switches and volume knob to the left. although i do notice when holding mine, (left handed) that i can hit the buttons with my knuckles fairly easy, so use your discretion when choosing.<br>
4 Handle: heavy modification for large lighted arcade buttons.<br>
5 Pipe Socket : larger hole for acrylic rod instead of glue stick<br>
6 Finger pt. 1 : hole for red LED<br>
7 Front cover pt 2 : holes for red LEDs<br>
8 Neopixel ring mount : This goes in the end of the gun to hold the 16x neopixel LED ring.<br>
9 Indicator Light holder : holds an individual neopixel at in the hole in the &quot;generator top&quot; piece. (may need sanded for a flush fit.<br>
10 Rod neopixel holder : print 2, slips on the end of the acrylic rod to hold 2 7x Neopixel Jewels.<br>
11 Speaker Enclosure : boxes to enclose the back of the speakers, should increase bass response. i did not test this without them so i dont want to say they are optional. even with them, it could sound better, so i would suggest using them. gluing them down, you should aim for air tight (this was difficult)<br>
12 last 3 pieces are the stand to hold and display the gun.</p>
<p><strong> List of parts/README, included in github link as well</strong></p>
<ol><li>
<p>Arduino Nano (or clone) (<a rel="nofollow" href="https://www.amazon.com/ELEGOO-Arduino-ATmega328P-Without-Compatible/dp/B0713XK923/ref=sr_1_4?dchild=1&amp;keywords=arduino+nano&amp;qid=1602026870&amp;sr=8-4&amp;tag=tv-auto-20">https://www.amazon.com/ELEGOO-Arduino-ATmega328P-Without-Compatible/dp/B0713XK923/ref=sr_1_4?dchild=1&amp;keywords=arduino+nano&amp;qid=1602026870&amp;sr=8-4</a>)<br>
i used those cheaper arduino clones i linked, should be interchangeable with any arduino nano.</p>
</li>
<li>
<p>Adafruit sound FX board (<a rel="nofollow" href="https://www.amazon.com/gp/product/B010M8UOR8/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B010M8UOR8/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;psc=1</a>)<br>
i used the 2mb version, and with the sounds i provided it came in just under 2mb, there is a 16mb version if you want to use your own sound effects, or have them higher quality.</p>
</li>
<li>
<p>Neopixel Jewel x2 (<a rel="nofollow" href="https://www.amazon.com/gp/product/B0105VMT4S/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B0105VMT4S/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1</a>)<br>
again, i got knock offs, but any neopixel compatible clone should do. I hvae had good luck so far with DIYMall brand from amazon.</p>
</li>
<li>
<p>Neopixel Ring 16 led version (<a rel="nofollow" href="https://www.amazon.com/dp/B08F9HSNSD/?coliid=IWRMIFVUICFMT&amp;colid=3CGBY3S7A1KD5&amp;psc=1&amp;ref_=lv_ov_lig_dp_it&amp;tag=tv-auto-20">https://www.amazon.com/dp/B08F9HSNSD/?coliid=IWRMIFVUICFMT&amp;colid=3CGBY3S7A1KD5&amp;psc=1&amp;ref_=lv_ov_lig_dp_it</a>)<br>
same as above</p>
</li>
<li>
<p>Individual Neopixel (<a rel="nofollow" href="https://www.amazon.com/gp/product/B01D1FFVOA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B01D1FFVOA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1</a>)<br>
i bought a pack of 100 as they are cheap, if you do other projects they can come in handy, but this only needs one.</p>
</li>
<li>
<p>2 SPST Switches (<a rel="nofollow" href="https://www.digikey.com/en/products/detail/cw-industries/GRS-4011-0118/4425759">https://www.digikey.com/en/products/detail/cw-industries/GRS-4011-0118/4425759</a>)<br>
the modified STL files i provided have cutouts for switches of these dimensions specifically.</p>
</li>
<li>
<p>2 momentary buttons (i did one red and one black) (<a rel="nofollow" href="https://www.digikey.com/en/products/detail/e-switch/PS1023ARED/81776">https://www.digikey.com/en/products/detail/e-switch/PS1023ARED/81776</a>) (<a rel="nofollow" href="https://www.digikey.com/en/products/detail/e-switch/PS1023ABLK/82862">https://www.digikey.com/en/products/detail/e-switch/PS1023ABLK/82862</a>)<br>
same as above</p>
</li>
<li>
<p>Blue arcade button (<a rel="nofollow" href="https://www.digikey.com/en/products/detail/adafruit-industries-llc/3432/7349494">https://www.digikey.com/en/products/detail/adafruit-industries-llc/3432/7349494</a>)<br>
same as above</p>
</li>
<li>Red arcade button (<a rel="nofollow" href="https://www.digikey.com/en/products/detail/adafruit-industries-llc/3430/7349492">https://www.digikey.com/en/products/detail/adafruit-industries-llc/3430/7349492</a>)<br>
same as above</li>
<li>
<p>2 inch speakers (<a rel="nofollow" href="https://www.amazon.com/gp/product/B01CHYIU26/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B01CHYIU26/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1</a>)<br>
same as the switches, i designed the holes around these specific speakers.</p>
</li>
<li>
<p>5 volt amplifier (<a rel="nofollow" href="https://www.amazon.com/gp/product/B07G4DLM9D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B07G4DLM9D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1</a>)<br>
a little less picky as the rest of the parts, this is designed around a usb battery bank, so any 5v amplifier should work. the one i used was about the cheapest available. also the hole in the hatch is designed around this one mounting to give you access to the volume knob.</p>
</li>
<li>
<p>Micro usb board (<a rel="nofollow" href="https://www.amazon.com/gp/product/B07B5ZDLJY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B07B5ZDLJY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1</a>)<br>
optional, as you could hardwire power directly too the system. (more on that below)</p>
</li>
<li>
<p>330 ohm resistors x4<br>
might depend on the LEDs you get, but they should all be relatively the same. these just limit the current to keep the LEDs from burning out</p>
</li>
<li>
<p>3 Red 5mm LEDs, and another of any color (i used green) for the main power light.<br>
these are for the base of the &quot;fingers&quot;. in the game there were 3 red lights at the base as well and another 3 at the first joint. i opted for just the 3 for simplicity.</p>
</li>
<li>
<p>Misc wires (i used scrap ethernet cable and some dupont jumpers i got on amazon)<br>
this is not exactly a power hog, so any wires should do fine.</p>
</li>
<li>
<p>USB battery bank (maybe not the smallest cheapest thing you can find, but it doesnt need to be huge)<br>
with the exact parts listed above, minus the neopixel ring (i was originally going to just use 2 jewels), and only a single 8 ohm speaker hooked to the amp, with the amp at full volume i registered a little over an amp of current. i plan on running the 2 4-ohm speakers on each channel which will increase the current draw (i plan on testing it once i get it put together completely.) i have a battery which can supply 2 amps per usb, and a total of 3.2. if i notice power issues, i may hook the amp power to its own usb cord. i will try to remember to update this once i am done.</p>
</li>
<li>
<p>20mm or .8 inch acrylic rod. (<a rel="nofollow" href="https://www.amazon.com/gp/product/B0832JFR7F/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B0832JFR7F/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1</a>)<br>
i used a &quot;bubble rod&quot; so the lights were a little more visable in it. 20mm or .8 inch should work, these seem to come and go. every time i come back to order one again its unavailable and i have to find another seller. check amazon or ebay.</p>
</li>
<li>Clear pipe 2.5 inch (<a rel="nofollow" href="https://www.homedepot.com/p/POWERTEC-2-1-2-in-x-36-in-Long-Clear-Pipe-70176/207185612">https://www.homedepot.com/p/POWERTEC-2-1-2-in-x-36-in-Long-Clear-Pipe-70176/207185612</a>)<br>
i had a hard time finding the metric size the original designer had used as i am in the states, he had used 60mm which is about 2.3 inch. i made the hole big enough to fit the 2.5 inch pipe i found from home depot (and it was a tight fit.)</li>
</ol><p>Power:</p>
<p>notice i ran power directly to the 5v pin of the arduino. i believe this bypasses the voltage regulator and powers it directly. you could power the arduino off the VIN pin with a higher voltage battery and run the lights, fx board, and amp off this pin, but it would be pushing the arduino to the limit. i chose to just power everything separately from the usb battery bank so i don&apos;t fry the arduino. be careful though, as if you plug in your usb cable with this hooked up, it will attempt to output 5v on this pin and power everything else. the amplifier i linked can be turned off with the volume knob, so you should be safe that way</p>
<p>Button LEDs:</p>
<p>The LEDs in the blue and red arcade buttons could be powered off either A1 or A2. with the dupont connectors i used, it was more convenient to have 2 separate pins, but you don&apos;t have to use both of them if you dont want to. I do however have the 3 red LEDs a little dimmer, so A0 is different than A1 and A2.</p>
<p>The Song:</p>
<p>The song button is programmed to play &quot;Still Alive&quot;. i have not included this in the files for copyright purposes. you will have to find a copy yourself. I formatted it to OGG , mono and the lowest quality to get it down to 1.08MB there is a little room on the 2MB board for it to be a little bigger than that. As stated above, you can always get the 16MB FX board for just a couple bucks more. i believe there are 4 models, 2MB and 16MB, both with and without a 3.5mm jack. any of them should work, but i did not use the headphone jack.</p>
<p>2 Power switches:</p>
<p>the reason there are 2 power switches, is one is a true power switch that kills power to the whole circuit (so your battery doesn&apos;t drain when you aren&apos;t using it). The other switch is a simulated power switch. it powers the gun up and down (with power up and down sound effects). if you have the simulated power switch on when you turn the main power switch on, sometimes it just jumps straight into the idle hum, sometimes a couple of the lights turn green. either way the gun works as expected once you push a button.</p>
<p>If you have any questions, comment on thingiverse, i might not see it immediately, but i will try my best to respond.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.32</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black/White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I printed everything at 0.32 layer height and did extensive finishing on the white parts.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>I wanted the white part at lest to have a nice sheen to it. i used wood filler on the more troublesome parts, and the seams. sanded. then used Rustoleum filler primer in a rattle can. sprayed, sanded, sprayed, sanded... so much sanding.... used 120 grit to get a flat surface, then 400 to smooth out the scratches in the primer.</p>
<p>finished it with 4 coats of white high gloss enamel, sanded that with 800, then 1500, then rubbing compound and a microfiber cloth. it could be better, but i am happy with it. this is far from a tutorial as im a painting noob, im just telling you what i did. please go watch some youtube videos on painting and take more time that i did.</p>
<p>for the black parts, i just cleaned it up with an exacto knife and a nail file. then dry brushed it with silver acrylic paint to give it a slight worn metal look.</p></div>
</body></html>

Arduino powered Portal Gun

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I bought a cheap roll of filament that didn&apos;t come with a spool.<br>
The available designs all were too big to print on my Flashforge Creator Pro (which is not small, but also not large).<br>
So I designed this one.</p>
<p>Since it is done in Openscad it should be possible to modify most of the parameters, but I did not put any effort into making it customizable.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>FlashForge</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2F3xKW3?tag=tv-auto-20" target="_blank">Creator Pro</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Iprint3d+PLA&amp;tag=tv-auto-20" target="_blank">
                        Iprint3d PLA                    </a>

                    White
</body></html>

Filament Spool in 2 halves for smaller print beds

I bought a cheap roll of filament that didn't come with a spool.
The available designs all were too big to print on my Flashforge Creator Pro (which is not small, but also not large).
So I designed this one.

Since it is done in Openscad it should be possible to modify most of the parameters, but I did not put any effort into making it customizable.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Artificer set</p>
<p>(This is a remix but thingiverse don&apos;t let me select creations at the moment)</p></div>
</body></html>

Artificer set

Artificer set

(This is a remix but thingiverse don't let me select creations at the moment)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Initial design from Amochris.<br>
I refined him and give him more &quot;human&quot; armor look to fit with the human base team.</p>
<p>Please give me your feeling about this one as I&apos;ve planned to do a complete team. At least two of them will have the &quot;human&quot; armor look to integrate my team, but I consider of creating a more &quot;food&quot; armor to make a real halfling team.<br>
Any advice is welcome.</p>
<p>I&apos;ve not printed it at this time, but I checked the slicing in chitubox and it may not create problems.</p>
<p>If you print it, shows it to the community !</p>
<p>Have good games !</p></div>
</body></html>

Heavy armored halfling - Blood Bowl

Initial design from Amochris.
I refined him and give him more "human" armor look to fit with the human base team.

Please give me your feeling about this one as I've planned to do a complete team. At least two of them will have the "human" armor look to integrate my team, but I consider of creating a more "food" armor to make a real halfling team.
Any advice is welcome.

I've not printed it at this time, but I checked the slicing in chitubox and it may not create problems.

If you print it, shows it to the community !

Have good games !

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Fun little project for the HL Fans out there.  Capture and play your own sound bytes from your favorite games.</p>
<p>Used Adafruit Sound FX board.  Captured sound bytes using Audacity (Record what I hear)</p>
<p>Random buttons and switches from Amazon, BOM Below</p>
<p>Designed case using Tinkercad</p>
<p><a rel="nofollow" href="https://youtu.be/Y8kLPPJKNZA">https://youtu.be/Y8kLPPJKNZA</a></p>
<p>BOM:</p>
<pre><code>1. Adafruit Sound FX w/2x2W amp 2/16MB  P/N: 2210
Speaker, 4 ohm                                          P/N: 1314
Buttons, Momentary                                  https://www.amazon.com/gp/product/B083JWZL4G/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&amp;psc=1
Battery Box 3xAAA                                           P/N: 4779   
Power Switch    Any toggle switch   https://www.amazon.com/gp/product/B07XC5KB8D/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;psc=1</code></pre>
<p>Alt:<br>
PowerBoost 1000 Charger - 5v Lipo           P/N: 2465<br>
Lith Ion Polymer Batt - 3.7v 2500mAh        P/N: 328</p>
<p>*P/N provided are from Adafruit.com</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Black and Orange
</body></html>

Half Life Sound Box

Fun little project for the HL Fans out there.  Capture and play your own sound bytes from your favorite games.

Used Adafruit Sound FX board.  Captured sound bytes using Audacity (Record what I hear)

Random buttons and switches from Amazon, BOM Below

Designed case using Tinkercad

https://youtu.be/Y8kLPPJKNZA

BOM:

	1. Adafruit Sound FX w/2x2W amp 2/16MB 	P/N: 2210
	Speaker, 4 ohm	                                        P/N: 1314
	Buttons, Momentary	                                https://www.amazon.com/gp/product/B083JWZL4G/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
	Battery Box 3xAAA	                                        P/N: 4779	
	Power Switch	Any toggle switch	https://www.amazon.com/gp/product/B07XC5KB8D/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Alt:
	PowerBoost 1000 Charger - 5v Lipo	        P/N: 2465
	Lith Ion Polymer Batt - 3.7v 2500mAh    	P/N: 328



*P/N provided are from Adafruit.com


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a replica of the classic figure #3 from the Grenadier box Specialists number 2006.<br>
(see <a rel="nofollow" href="http://www.dndlead.com/grenadier/ADandD/2006.jpg">http://www.dndlead.com/grenadier/ADandD/2006.jpg</a> )</p>
<p>Scan made using<br><a rel="nofollow" href="/thing:1762299">https://www.thingiverse.com/thing:1762299</a></p>
<p>&quot;Half-orc cleric&quot;</p>
<p>This one should be of particular interest to collectors. The mace handle is a weak point, so it would break off easily. As a result, many original models are probably not intact. Unfortunately, that is a weak point in the reproduction, so you have to be very careful when removing the support material.</p>
<p>Since this model completes the set of Specialists, they all posed for a photo opportunity in the original box.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Maker Ultimate</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    blue
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print at 120% to match size of original.<br>
Set Z = -0.4 mm<br>
I recommend adding extra support around the mace (see image).<br>
Be careful when removing the support as the mace handle is very thin.</p></div>
</body></html>

Replica of Grenadier Specialists 2006 #1 Miniature

This is a replica of the classic figure #3 from the Grenadier box Specialists number 2006.
(see http://www.dndlead.com/grenadier/ADandD/2006.jpg )

Scan made using
https://www.thingiverse.com/thing:1762299

"Half-orc cleric"

This one should be of particular interest to collectors. The mace handle is a weak point, so it would break off easily. As a result, many original models are probably not intact. Unfortunately, that is a weak point in the reproduction, so you have to be very careful when removing the support material.

Since this model completes the set of Specialists, they all posed for a photo opportunity in the original box.

<html><head></head><body><div class="text-auto-link">
                                            <p>this pack contains 6 unique yuan-ti snake people. including a multi-headed monster and a sorcerer character. all pre supported and tested.</p>
										</div>
                                    								</body></html>

Yuan-ti Forgotten Tribe Pack - 6 pre supported miniatures - D&D - 32mm scale

 this pack contains 6 unique yuan-ti snake people. including a multi-headed monster and a sorcerer character. all pre supported and tested. 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Bingo&#xB4;s back, and he&#xB4;s ready to hack n&#xB4;whack all your foes to mince. This version of Bingo comes in two versions, one with an elaborate, printable base, and one with a simpler &quot;foot on rock&quot; pose that will fit on a wide variety of commercial plastic bases.</p>
<p>Presupported Chitubox file included for ease of printing. All my models are tested on my Anycubic Photon printer before uploading, but I encourage you to review the file prior to printing and make adjustments if appropriate for your printer settings and materials.</p>
<p>If you do print and paint any of my miniatures, please share them with hashstag &quot;iolminis&quot; or &quot;imitationoflifeminiatures&quot; so I get to see them :)</p>
<p>Have fun.</p>
										</div>
										
                                    								</body></html>

Bingo the barbarian, Chaotic Halfling

 Bingo´s back, and he´s ready to hack n´whack all your foes to mince. This version of Bingo comes in two versions, one with an elaborate, printable base, and one with a simpler "foot on rock" pose that will fit on a wide variety of commercial plastic bases. Presupported Chitubox file included for ease of printing. All my models are tested on my Anycubic Photon printer before uploading, but I encourage you to review the file prior to printing and make adjustments if appropriate for your printer settings and materials. If you do print and paint any of my miniatures, please share them with hashstag "iolminis" or "imitationoflifeminiatures" so I get to see them :) Have fun. 

Thingscanner

Some articles you might like