Convert the flashlight on your iPhone into a classy mini lampshade, using the 3D printed Ibat Jour collection.

Check out the Ibat Jour Flash Lamp For iPhone | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design of a hardhat clamp for a 25.4 mm. (Nitecore) flashlight</p>
<p>To be completed with two M5 nuts and two M5x12bolts</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=n%2Fa+PETG&amp;tag=tv-auto-20" target="_blank">
                        n/a PETG                    </a>

                    Black
</body></html>

Hardhat Clamp for 25.4 mm. flashlight

My design of a hardhat clamp for a 25.4 mm. (Nitecore) flashlight

To be completed with two M5 nuts and two M5x12bolts

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Of all the designs I found for flashlights, I loved the design of this holder, the clip part specifically.  I appreciate the work to design this for a specific model flashlight, but I didn&apos;t need the hood/cover or the bottom piece.  So I removed the hood and scaled it down to fit a 20mm LED flashlight, making this a bit more generic.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=N%2FA+PLA&amp;tag=tv-auto-20" target="_blank">
                        N/A PLA                    </a>

                    Black
</body></html>

Flashlight Holder - no hood - 20mm

Of all the designs I found for flashlights, I loved the design of this holder, the clip part specifically.  I appreciate the work to design this for a specific model flashlight, but I didn't need the hood/cover or the bottom piece.  So I removed the hood and scaled it down to fit a 20mm LED flashlight, making this a bit more generic.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Flexi Dogleash Flashlight Holder Remix-</p>
<p>Enlarged to 30mm to hold Duracell 300 Flashlights from the bulk packs from Costco. Then I added bumps on each side to hold a custom printed strap. Note: this has only been tested on the medium version of the Flexi Dogleash.</p>
<p>The flashlight I was using would fall out on occasion when it was knocked around, the strap locks it in place asuring no more messing with it.</p>
<p>Holder can be printed in PLA+ or PETG. Strap should be printed with TPU and is not required but definatly helps lock it in place with being able to easily remove it.</p>
<p>TPU Strap: Modified cable tie from <a rel="nofollow" href="/thing:3961115">https://www.thingiverse.com/thing:3961115</a> (Thingiverse wouldn&apos;t let me add it in the Remix Source Files section, must be broken atm or something)</p>
<p>Update: Send me a request and I can adjust the size to fit your flashlight, just send me the exact dimension.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sainsmart+Translucent+Green+%7C+Overture+Black+Sainsmart+TPU+%7C+Overture+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        Sainsmart Translucent Green | Overture Black Sainsmart TPU | Overture PLA+                    </a>

                    
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed origionally in PETG, bought some black PLA+ later and reprinted and felt just as solid if not a bit more sturdy.</p></div>
</body></html>

Flexi Dogleash Flashlight Holder + Strap

Flexi Dogleash Flashlight Holder Remix-

Enlarged to 30mm to hold Duracell 300 Flashlights from the bulk packs from Costco. Then I added bumps on each side to hold a custom printed strap. Note: this has only been tested on the medium version of the Flexi Dogleash.

The flashlight I was using would fall out on occasion when it was knocked around, the strap locks it in place asuring no more messing with it.

Holder can be printed in PLA+ or PETG. Strap should be printed with TPU and is not required but definatly helps lock it in place with being able to easily remove it.

TPU Strap: Modified cable tie from https://www.thingiverse.com/thing:3961115 (Thingiverse wouldn't let me add it in the Remix Source Files section, must be broken atm or something)

Update: Send me a request and I can adjust the size to fit your flashlight, just send me the exact dimension.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I wanted a way to carry items that have pocket clips (knives, multi-tools, flash lights and so on) on my belt without using bulky sheaths.  I also do not like weighing my pockets down with a bunch of EDC stuff!!  Print several for a low profile batman utility belt!!</p>
<p>This can slip on and off with out removing belt.  Designed for a .125&quot; x 1.5&quot; belt</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Overture+PLA&amp;tag=tv-auto-20" target="_blank">
                        Overture PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed laying on its side without supports nor rafts.  Printed in about 1-1/2 hours</p></div>
</body></html>

Belt Clip

I wanted a way to carry items that have pocket clips (knives, multi-tools, flash lights and so on) on my belt without using bulky sheaths.  I also do not like weighing my pockets down with a bunch of EDC stuff!!  Print several for a low profile batman utility belt!!

This can slip on and off with out removing belt.  Designed for a .125" x 1.5" belt

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design for a flashlight holder for benelli m1014 airsoft shotgun.<br>
I used a 2&#x20AC; aliexpress flashlight.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>flashlight link: <a rel="nofollow" href="https://es.aliexpress.com/item/33057383858.html?spm=a2g0o.productlist.0.0.33bc62c1DFnh8R&amp;algo_pvid=d0e8cb17-9225-47a0-9796-0bd3d1a0c400&amp;algo_expid=d0e8cb17-9225-47a0-9796-0bd3d1a0c400-13&amp;btsid=0b0a187b16051810630163350e1592&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_">https://es.aliexpress.com/item/33057383858.html?spm=a2g0o.productlist.0.0.33bc62c1DFnh8R&amp;algo_pvid=d0e8cb17-9225-47a0-9796-0bd3d1a0c400&amp;algo_expid=d0e8cb17-9225-47a0-9796-0bd3d1a0c400-13&amp;btsid=0b0a187b16051810630163350e1592&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_</a></p></div>
</body></html>

benelli m1014 airsoft shotgun flashlight holder

My design for a flashlight holder for benelli m1014 airsoft shotgun.
I used a 2€ aliexpress flashlight.



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hot shoe mount for flashlights of various sizes.</p>
<p>works for my nikon d5100, but you might want to check the size of shoe for your specific camera.</p>
<p>Doesn&apos;t have the ability to adjust the light angle, besides shimming.</p>
<p>(note: I wouldn&apos;t actually recommend using the mount with such a huge flashlight I have done so in some of the pictures)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>designed to not need supports.</p>
<p>needs bridging</p></div>
</body></html>

Hot Shoe Flashlight Mount

Hot shoe mount for flashlights of various sizes.

works for my nikon d5100, but you might want to check the size of shoe for your specific camera.

Doesn't have the ability to adjust the light angle, besides shimming.

(note: I wouldn't actually recommend using the mount with such a huge flashlight I have done so in some of the pictures)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Flashlight brim holder for 25.4mm/1&quot;, 28mm, 30mm, and 34mm flashlights. It has a bit of room to clamp down for flashight sizes &lt;~1mm in range.</p>
<p>Reinforced the joints, and added a 15 degree angle for a better angle for your flashlight to point down at. </p>
<p>*Added small teeth to the inside of the brim clamp for better hold.</p>
<p>*Made the screw a tad smaller so it&apos;d fit in the hole easier, and changed to a tightening with a coin. (it&apos;s pretty friction fit already, you probably don&apos;t need the screw unless you really want it secured)</p>
<p>*Added extra reinforced version of 15degrees using thicker clamp and also skeletonized it for extra walls during print.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.24</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=++PLA&amp;tag=tv-auto-20" target="_blank">
                          PLA                    </a>

                    
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>No Supports, thicker walls (4 walls in Cura)</p></div>
</body></html>

Cap Brim Flashlight Mount - 25.4, 28, 30, & 34mm at 15degrees

Flashlight brim holder for 25.4mm/1", 28mm, 30mm, and 34mm flashlights. It has a bit of room to clamp down for flashight sizes <~1mm in range.

Reinforced the joints, and added a 15 degree angle for a better angle for your flashlight to point down at. 

*Added small teeth to the inside of the brim clamp for better hold.

*Made the screw a tad smaller so it'd fit in the hole easier, and changed to a tightening with a coin. (it's pretty friction fit already, you probably don't need the screw unless you really want it secured)

*Added extra reinforced version of 15degrees using thicker clamp and also skeletonized it for extra walls during print.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Picatinny rail attachment for Tactical Torch of 25mm Diameter<br>
Designed to be ultra compact and designed for a torch of 25mm diameter<br>
Intended for use with Airsoft/Gelsoft toys only</p>
<p>Construction requires:</p>
<ul><li>1 x 35mm M3 screw</li>
<li>1 x 15mm M3 screw</li>
<li>2 x M3 Nuts</li>
</ul><p>If you like this design, tip me a coffee and I&apos;ll upload more :D<br><a rel="nofollow" href="https://paypal.me/jupiter296">https://paypal.me/jupiter296</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Flashforge+PLA&amp;tag=tv-auto-20" target="_blank">
                        Flashforge PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>50mm/s+<br>
5 Wall Layers<br>
0.12 layer height<br>
over 9000 everything else.</p></div>
</body></html>

Picatinny rail Tactical Torch Attachment

Picatinny rail attachment for Tactical Torch of 25mm Diameter
Designed to be ultra compact and designed for a torch of 25mm diameter
Intended for use with Airsoft/Gelsoft toys only

Construction requires:
 - 1 x 35mm M3 screw
 - 1 x 15mm M3 screw
 - 2 x M3 Nuts

If you like this design, tip me a coffee and I'll upload more :D
https://paypal.me/jupiter296

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The original cap was for a Convoy S2+ with a 24mm outer diameter, I have scaled it for a Convoy S21A with a 26,5mm outer diameter. </p>
<p>I love this cap, I not only use it nearly every day on my Road and MTB rides, but it is also the best from Thingiverse, by far, my friends also love it. On the road, it avoids to blind other cars, and in the trails blinds less than without it.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.24</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SMARTFILL+PETG&amp;tag=tv-auto-20" target="_blank">
                        SMARTFILL PETG                    </a>

                    Blue
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Easy print, make it 4 outter walls and 50% infill for the bottom part.</p></div>
</body></html>

Convoy S21A Flashlight Cap (D26,5mm)

The original cap was for a Convoy S2+ with a 24mm outer diameter, I have scaled it for a Convoy S21A with a 26,5mm outer diameter. 

I love this cap, I not only use it nearly every day on my Road and MTB rides, but it is also the best from Thingiverse, by far, my friends also love it. On the road, it avoids to blind other cars, and in the trails blinds less than without it.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A small adapter for converting a flashlight from a fixed price list for working with an 18650 battery.<br>
Requires some improvements, which are described in the video.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.08 variable</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=no+matter+no+matter&amp;tag=tv-auto-20" target="_blank">
                        no matter no matter                    </a>

                    no matter
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/baSRQs_MGeY" frameborder="0" allowfullscreen></iframe></p>
</body></html>

Flashlight adapter for converting it to an 18650 battery

A small adapter for converting a flashlight from a fixed price list for working with an 18650 battery.
Requires some improvements, which are described in the video.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>If you bought one of the from Ace Hardware during the sale and need a holder look no further!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>MakerBot</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2n0N5Sv?tag=tv-auto-20" target="_blank">MakerBot Replicator Mini</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Proto+Pasta+Carbon+Fiber+&amp;tag=tv-auto-20" target="_blank">
                        Proto Pasta Carbon Fiber                     </a>

                    Black
</body></html>

Pro-4 Tactical Flashlight mount

If you bought one of the from Ace Hardware during the sale and need a holder look no further!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a custom Flashlight switch mount for an M4 Airsoft AR. I designed it to fit my Specna Arms M416 Carbine (SA-H09) but it might fit other carbine AR&apos;s, It secures in place with a single counter sunk M5 bolt and the bottom of the part has notches to fit the holes in the barrel so it doesn&apos;t spin or move at all.</p>
<p>Let me know if this fits any other gun, if you like this idea but want the mounting hole size different or want the hole moving forward or backwards, let me know in the comments and i&apos;ll change it and upload the custom one for you.</p>
<p>The position i have the hole is set for me to be able to press the button with my thumb while holding the AR with an angled grip on the underside of the barrel.</p>
<p>Enjoy and Happy shooting!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.01</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ERYONE+PETG&amp;tag=tv-auto-20" target="_blank">
                        ERYONE PETG                    </a>

                    Black
</body></html>

M4 Carbine Flashlight Pressure Switch Holder (For Airsoft)

This is a custom Flashlight switch mount for an M4 Airsoft AR. I designed it to fit my Specna Arms M416 Carbine (SA-H09) but it might fit other carbine AR's, It secures in place with a single counter sunk M5 bolt and the bottom of the part has notches to fit the holes in the barrel so it doesn't spin or move at all.

Let me know if this fits any other gun, if you like this idea but want the mounting hole size different or want the hole moving forward or backwards, let me know in the comments and i'll change it and upload the custom one for you.

The position i have the hole is set for me to be able to press the button with my thumb while holding the AR with an angled grip on the underside of the barrel.

Enjoy and Happy shooting!

Thingscanner

Some articles you might like

Check out the Ibat Jour Flash Lamp For iPhone | All3DP

Show Only

Looking for tag: flashlight