Tie Fighters, Yoda, Lightsabers or Storm Troopers: You can print out good looking Star Wars fan figurines yourself.

Star Wars: Fan memorabilia from a 3D printer | all3dp.com

This 3D printed Fallout power armor really is a piece of art. It took 140 hours and 120 lbs of filament to 3d print this 7-foot beauty.

Fallout Fan 3D Prints Life-Sized Power Armor | All3DP

For all Star Wars fans committed to their passion, here is a particularly sharp and styling variant of 3D printing: jewelry with a twist.

Star Wars fan with style, thanks to 3D printers - all3dp.com

Each year, the Armies of Parade competition invites fantasy battle fans to create their own miniature army displays. One of this year’s entries at the NYC Warhammer store was Jason Krieger… Former MakerBot creative director Jason Krieger is also a fantasy battle and DIY enthusiast. This year he gave an early display of his entry […]

Warhammer Fan Creates Winning Display for Armies of Parade | All3DP

Classic car collector Giuseppe Guerini has combined his passion for 3D printing and Porsches by 3D printing a 1:4 scale Porsche 356 engine.

Porsche Fan Creates Model Engine Using Laser Scanning and 3D Printing | All3DP

Five-year-old Jacob Taggart is a huge Star Wars fan with a physical disability. For Christmas, the MORE Foundation gifted him with a 3D printed prosthetic arm inspired by Stormtroopers.

5-Year-Old Star Wars Fan Receives 3D Printed Stormtrooper Prosthetic | All3DP

Fan of vintage cameras? Provide anaologue technology with pride of place on your wall with the HANGIE 3D printed wall mount.

HANGIE is a 3D Printed Wall Mount for Vintage Cameras | All3DP

There are fan-made Hearthstone items that are just top notch. Just look hat these 9 gorgeous 3D printed Hearthstone cards!

DIY Hearthstone Card: 9 Best Hearthstone Cards to 3D Print | All3DP

If you're a fan of collecting bugs and robotics, this open source 3D printed design, called Shellmo, could be perfect for you.

Meet Shellmo the 3D Printed Collectible Bug | All3DP

3D Systems Quickparts uses 3D printing to optimize and create auto parts. Now, they've printed parts for Jay Leno's one-of-a-kind concept car.

Jay Leno a Big Fan of 3D Printed Parts for EcoJet Concept Car | All3DP

Want to play Cyvasse, the fictional board game from TV series Game of Thrones? Then take a look at this incredible fan project.

Cyvasse: 3D Print Your Game of Thrones | All3DP

Super Mario fan and Redditor Jason Kirk created a "pixelized" flower pot that resembles the warp pipe from Super Mario Bros. Plant ’n play?

Redditor 3D Prints Super Mario Flower Pot | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple adapter to put a 30mm fan on a 40mm fan spot.<br>
Made to use M3 screws.</p>
<p>Made the v2, because with the original design the screws head had to be reduced with a file in order to fit properly.<br>
V2 has a cut so the screw head can fin underneath them.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Alfawise U30 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>Guess any would work</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+Whatever&amp;tag=tv-auto-20" target="_blank">
                        Any Whatever                    </a>

                    what you like the most
</body></html>

30mm to40mm Fan adapter

Simple adapter to put a 30mm fan on a 40mm fan spot.
Made to use M3 screws.

Made the v2, because with the original design the screws head had to be reduced with a file in order to fit properly. 
V2 has a cut so the screw head can fin underneath them.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.</p>
<p>This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.</p>
<p>The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.</p>
<p>The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be &quot;worked&quot; a little after assembly before its mounted on the printer.</p>
<p>This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.</p>
<p>BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement</p>
<p>You need a total of 25 links, and about 30 clips</p>
<p>Mounted to the frame with 2X M4 T nuts</p>
<p>The fanduct is a remake of<br><a rel="nofollow" href="/thing:4091776">https://www.thingiverse.com/thing:4091776</a></p>
<p>The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.</p>
<p>You can find the fan mount here<br><a rel="nofollow" href="/thing:4616767">https://www.thingiverse.com/thing:4616767</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kay3D Core XY  Ender 5 plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Form+Futura+PLA&amp;tag=tv-auto-20" target="_blank">
                        Form Futura PLA                    </a>

                    Black
</body></html>

Ender 5 plus, KAY3D CoreXY, Modification pack.

This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.

This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.
 
The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.

The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be "worked" a little after assembly before its mounted on the printer.

This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.

BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement

You need a total of 25 links, and about 30 clips

Mounted to the frame with 2X M4 T nuts

The fanduct is a remake of
https://www.thingiverse.com/thing:4091776

The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.

You can find the fan mount here
https://www.thingiverse.com/thing:4616767

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a remix of halfling team catchers made by Amochris.<br>
I refine the mesh and correct it to be printed on SLA printers.<br>
I add some details for realism.</p>
<p>You may find the 3D with or without supports. They are already scaled to 125% from the original files to suit better my wishes. You may compare the height with the human player on the picture.</p>
<p>Leave a comment if you like them and I will see to remesh the other players to make a complete team.<br>
Any supports is for that. Making this is quite time consuming for a beginner as me, and test printing demands a lot of resin.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Elegoo Mars 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.02</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=resin+water+washable+grey+resin&amp;tag=tv-auto-20" target="_blank">
                        resin water washable grey resin                    </a>

                    grey
</body></html>

Halfling catchers Blood Bowl

This is a remix of halfling team catchers made by Amochris.
I refine the mesh and correct it to be printed on SLA printers.
I add some details for realism.

You may find the 3D with or without supports. They are already scaled to 125% from the original files to suit better my wishes. You may compare the height with the human player on the picture.

Leave a comment if you like them and I will see to remesh the other players to make a complete team.
Any supports is for that. Making this is quite time consuming for a beginner as me, and test printing demands a lot of resin.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The change in this Remix was the I3 Mega for Mega S and other no named</p>
<p>With this fan mod you can use two 40x40x10 fans</p>
<p>the other things in this page <a rel="nofollow" href="/thing:2823129">https://www.thingiverse.com/thing:2823129</a></p>
<p>Update Experimental</p>
<p>BL Touch ( No Tested ) Plz Give me Feedbacks</p></div>
</body></html>

Anycubic Mega S mod fan

The change in this Remix was the I3 Mega for Mega S and other no named

With this fan mod you can use two 40x40x10 fans

the other things in this page https://www.thingiverse.com/thing:2823129

Update Experimental

BL Touch ( No Tested ) Plz Give me Feedbacks

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I put together some spacers and card trays so the original boxes could fit the complete collection. The spacers are really nice because the box won&apos;t bend the cards if you stack them on top of eachother.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=sunlu+PLA&amp;tag=tv-auto-20" target="_blank">
                        sunlu PLA                    </a>

                    Black
</body></html>

Warhammer Conquest Box Inserts

I put together some spacers and card trays so the original boxes could fit the complete collection. The spacers are really nice because the box won't bend the cards if you stack them on top of eachother.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Primal stencil</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Primal stencil

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I wanted a tool changer and compact setup for an Ender 5.  I have shamelessly repurposed / remixed pieces from several excellent contributors.  Most of this should work equally well with most Creality printers.</p>
<p>The objective was to end up with an Ender 5  <em>tool changing</em> capability, provide <em>better tool cooling</em>, <em>minimize loss of Y-axis</em>, support a <em>BLTouch</em>, work with the <em>standard Creality hotend</em> as well as <em>Microswiss / GulfCoast hotend</em>.</p>
<p>The Components for this mashup / remix are taken from these excellent things:</p>
<p><a rel="nofollow" href="/thing:3369444">Quick tool change for Creality CR-10 / Ender series</a> by ProperPrinting</p>
<p><a rel="nofollow" href="/thing:4116425">Light? Quick tool change for Creality Ender3</a> by  butt3rbr0t</p>
<p><a rel="nofollow" href="/thing:3432489">MinV2 Ender 3 fan mount</a> by ThijsOudeVrielink</p>
<p><a rel="nofollow" href="/thing:4525971">Airflow Optimized Fan Mount</a>  by  theduckom</p>
<p>My contribution was to adapt / combine / modify them for use with the Ender 5 as well as adding a little functionality along the way.</p>
<p>Note that this is a tool changer and means some loss of available Y-axis because of the way the Ender 5 is made.  The loss is approximately 20mm.  Since the Ender 5 bed is 235mm (total) the available print size is about 215 (i.e. about 5mm less than the advertised 220mm).</p>
<p>I have provided step and stl files for all the components.  Since some of the step files were derived from stl files, the facet count will be high.  Use your favorite software to create the stl files (don&#x2019;t forget to repair the stl, if necessary, in your slicer).</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>Mostly 50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Does+Not+Matter+Carbon+PETG+%2F+PETG+preferred&amp;tag=tv-auto-20" target="_blank">
                        Does Not Matter Carbon PETG / PETG preferred                    </a>

                    Does Not Matter
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>For the final version - I used CarbonX PETG (for stiffness and heat tolerance) on everything except the Clamp_Lever and Tool_Fan_Duct.  For those two components I used regular PETG because a little flex was desirable.</p>
<p>PLA was used for the prototypes and (after some spacing adjustments) worked well too.  In fact - the final version of the components (CarbonX and regular PETG)  were printed with all PLA components.  However, I&apos;d feel more confident at least using PETG for the Hotend_holder and Cooling_Fan_Duct.  Especially if doing high temp printing.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<div><p><strong>OVERVIEW</strong></p>
<p>Below is a brief description of the the results using the following component terminology; <strong>Exhange_Base_Clamp, Tool_Exchange_Base, Hotend_holder, Coolend_Fan_Duct, Tool_Fan_Duct</strong>.</p>
<p><strong>A full description, printing tips, assembly etc. are in the pdf file.</strong></p>
<p>I will refer to the original sourse things using these names for easier reference:<br>
Quick Toolchanger by ProperPrinting<br>
Lite Toolchanger by butt3rbr0t (a remix from the Toolchanger)<br>
Mini Fan Mount by ThijsOudeVrielink<br>
Optimized Fan Duct by theduckom ( a remix from The Mini Fan Mount)</p>
<p><strong>Exchange_Base_Clamp</strong></p>
<p>The Exchange_Base_Clamp comprises a Clamp Holder taken from the Lite Toolchanger and a Clamp Lever taken from the Quick Toolchanger (V2 Lever).<br>
The Lite Toolchanger was chosen because of it&#x2019;s slim (and elegant) design which minimized any reduction of space in the Y-axis. No changes were made.</p>
<p><strong>Tool_Exchange_Base</strong></p>
<p>The Tool_Exchange_Base was taken from the Quick Toolchanger and I incorporate a BLTouch mount from the Mini Fan Mount.<br>
I removed a section from the BLTouch mount so that the belt attachment did not interfere with it. I also added a couple of slots for zip-ties to hold the BLTouch cable neatly. The BLTouch offset from the nozzle is X = + 40mm and Y= +2 mm.</p>
<p><strong>Hotend_holder</strong></p>
<p>The Hotend_holder was taken from Lite Toolchanger (so as to match the Tool_Exchange_Base).<br>
I reduced the height of the hotend standoff and added additional elements for securing the Coolend_Fan_Duct (see below) as well as a strain relief section for the hotend heater and thermistor wires. A section at the back of the holder was removed to allow clearance for the (no longer used) Ender 5 hotend mounts on the carriage plate. I made all the holes go all the way through with hex nut slots on the back.</p>
<p><strong>Coolend_Fan_Duct</strong></p>
<p>During the initial prototyping &#x2013; I used the Coolend_Fan_Duct from Mini Fan Duct and printed in PLA. I noticed some softening of the Hotend_holder where the hotend (standard Ender) attached. Some of this may have been because of the PLA and some due to inadequate airflow. I decided to use the Coolend_Fan_Duct from Optimized Fan Duct as it promised better airflow. In order to accommodate the Microswiss / Gulfcoast, I widened the mounting brackets a little (1.5mm), lengthened the mounting brackets (2mm) and modified the mounting holes to suit the Hotend_holder. Slots were added give a bit of adjustment.</p>
<p><strong>Tool_Fan_Duct</strong></p>
<p>The Tool_Fan_Duct was taken from Mini Fan Duct. It&#x2019;s very thin and clips into place via a detent in the Coolend_Fan_Duct. It does wobble a little and in one of my experiments collide with the top layer during printing. I added a small mount to the front of the Tool_Fan_Duct and corresponding mount to the Coolend_Fan_Duct to help stabilize. I also created the step file so that the length of the Duct can be lengthened or (more likely) shortened.</p></div>
</body></html>

Ender 5 Mini Tool Changer

I wanted a tool changer and compact setup for an Ender 5.  I have shamelessly repurposed / remixed pieces from several excellent contributors.  Most of this should work equally well with most Creality printers.

The objective was to end up with an Ender 5  *tool changing* capability, provide *better tool cooling*, *minimize loss of Y-axis*, support a *BLTouch*, work with the *standard Creality hotend* as well as *Microswiss / GulfCoast hotend*.

The Components for this mashup / remix are taken from these excellent things:

[Quick tool change for Creality CR-10 / Ender series](https://www.thingiverse.com/thing:3369444) by ProperPrinting


[Light? Quick tool change for Creality Ender3](https://www.thingiverse.com/thing:4116425) by  butt3rbr0t

[MinV2 Ender 3 fan mount](https://www.thingiverse.com/thing:3432489) by ThijsOudeVrielink

[Airflow Optimized Fan Mount](https://www.thingiverse.com/thing:4525971)  by  theduckom

My contribution was to adapt / combine / modify them for use with the Ender 5 as well as adding a little functionality along the way.

Note that this is a tool changer and means some loss of available Y-axis because of the way the Ender 5 is made.  The loss is approximately 20mm.  Since the Ender 5 bed is 235mm (total) the available print size is about 215 (i.e. about 5mm less than the advertised 220mm).

I have provided step and stl files for all the components.  Since some of the step files were derived from stl files, the facet count will be high.  Use your favorite software to create the stl files (don’t forget to repair the stl, if necessary, in your slicer).



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Printed in PLA I borrowed the original designs from </p>
<p><a rel="nofollow" href="/thing:3667464">https://www.thingiverse.com/thing:3667464</a><br><a rel="nofollow" href="/thing:1879694">https://www.thingiverse.com/thing:1879694</a></p>
<p>Also I printed them at 3mm thick for quick print</p>
<p>Printed in CURA<br>
Ender 5 Pro<br>
Print Speed 150MM<br>
PLA   220 Extruder 70 Bed<br>
No Supports<br>
No Adhesion<br>
25% Infill<br>
Layer Height 0.2mm</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=pla+PLA&amp;tag=tv-auto-20" target="_blank">
                        pla PLA                    </a>

                    rainbow
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed in PLA I borrowed the original designs from </p>
<p><a rel="nofollow" href="/thing:3667464">https://www.thingiverse.com/thing:3667464</a><br><a rel="nofollow" href="/thing:1879694">https://www.thingiverse.com/thing:1879694</a></p>
<p>Also I printed them at 3mm thick for quick print</p>
<p>Printed in CURA<br>
Ender 5 Pro<br>
Print Speed 150MM<br>
PLA   220 Extruder 70 Bed<br>
No Supports<br>
No Adhesion<br>
25% Infill<br>
Layer Height 0.2mm</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/1f/e2/9a/55/c7/PXL_20201102_101244635.jpg"></p>
</body></html>

WOW Alliance FAN Cover 120MM

Printed in PLA I borrowed the original designs from 

https://www.thingiverse.com/thing:3667464
https://www.thingiverse.com/thing:1879694

Also I printed them at 3mm thick for quick print

Printed in CURA
Ender 5 Pro
Print Speed 150MM 
PLA   220 Extruder 70 Bed 
No Supports
No Adhesion
25% Infill
Layer Height 0.2mm





<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Griffin stencil 2</p></div>
</body></html>

Griffin stencil 2

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Griffin</p></div>
</body></html>

Griffin stencil

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is my second attempt at making a Chaos Warrior. </p>
<p>I tried adding a HeroQuest base for the figure. It is slightly taller than your average HQ figures though so you might need to tweak the height and density of it a bit if you want it to look like the classic miniatures from that boardgame.</p>
<p>You could also use it for other games of course or as a statue perhaps :)</p>
<p>This is for non-commercial use only.<br>
It is not allowed to 3D print my design and earn money off of it. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=AIO+Robotics+Filament+PLA+1.75+mm&amp;tag=tv-auto-20" target="_blank">
                        AIO Robotics Filament PLA 1.75 mm                    </a>

                    White
</body></html>

SL Chaos Warrior 02

This is my second attempt at making a Chaos Warrior. 

I tried adding a HeroQuest base for the figure. It is slightly taller than your average HQ figures though so you might need to tweak the height and density of it a bit if you want it to look like the classic miniatures from that boardgame.

You could also use it for other games of course or as a statue perhaps :)

This is for non-commercial use only. 
It is not allowed to 3D print my design and earn money off of it. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Habe diesen Halter f&#xFC;r die DJI Airunit mit L&#xFC;ftung und Gimbal designed, um sie in meinem 1/8er Truggy oder in einem Flieger unter zu bringen. Damit sie nicht &#xFC;berhitzt, mit Aufnahme f&#xFC;r einen 40er L&#xFC;fter. </p>
<p>!Die L&#xFC;fteraufnahme muss aus TPU gedruckt werden, sonst kriegt ihr den L&#xFC;fter nicht rein!</p>
<p>F&#xFC;r das Gimbal braucht Ihr noch:</p>
<p>-1x 9g Servo  ( <a rel="nofollow" href="https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&amp;_asc=4724705239">https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&amp;_asc=4724705239</a> )<br>
-2x Kugellager DIN 938-2 (2x5x2,3)<br>
-2x Schraube M2x5</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=other++TPU+PLA&amp;tag=tv-auto-20" target="_blank">
                        other  TPU PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div></div>
</body></html>

Gimbal for DJI Airunit + Fan holder

Habe diesen Halter für die DJI Airunit mit Lüftung und Gimbal designed, um sie in meinem 1/8er Truggy oder in einem Flieger unter zu bringen. Damit sie nicht überhitzt, mit Aufnahme für einen 40er Lüfter. 

!Die Lüfteraufnahme muss aus TPU gedruckt werden, sonst kriegt ihr den Lüfter nicht rein!

Für das Gimbal braucht Ihr noch:

-1x 9g Servo  ( https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=4724705239 )
-2x Kugellager DIN 938-2 (2x5x2,3)
-2x Schraube M2x5



Thingscanner

Some articles you might like