The Amazon Echo Dot is a big seller on the online megastore. Here's a collection of some of the best echo dot accessories to 3D print.

20 Best Amazon Echo Dot Accessories to 3D Print | All3DP

With just some parts and a 3D printer, you can build an iconic Mini Commodore PET - with a retro greenish LED dot matrix to display the messages you want.

3D Print a Mini Commodore PET with A Working LED Screen | All3DP

Recently purchased an Amazon Echo Dot but not in love with its eerie futuristic attitude? Maker Baard Fleistad has created the Gramazon, a 3D printable gramophone attachment to give your AI device a 1920s makeover.

Gramazon: Turn Your Amazon Echo Dot Into a Gramophone with 3D Printing | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>We use our Amazon Echo Dots mainly as Baby Phone.<br>
This blind covers the LED Ring of an Echo Dot Gen 3 which is active during  a drop-in. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>
</body></html>

Amazon Echo Dot Gen3 Led Ring Blind

We use our Amazon Echo Dots mainly as Baby Phone.
This blind covers the LED Ring of an Echo Dot Gen 3 which is active during  a drop-in. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A new version of the nerf scope.<br>
3mm hole for the bolt to add to rail. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>at least 10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA&amp;tag=tv-auto-20" target="_blank">
                        any PLA                    </a>

                    any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used what ever PLA I have to hand. </p>
<p>This is a work in progress and would love any feedback. </p></div>
</body></html>

Nerf Scope 5 

A new version of the nerf scope. 
3mm hole for the bolt to add to rail. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Remix of the Dota Icecube Tray. Meant as mold for silicone or similar.</p>
<p>Double scaling in z for more depth/bigger cubes</p>
<p>Not tested yet, will post results when done.</p>
<p>Probably best finish off with coating to avoid sticking </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.28</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>
</body></html>

Dota 2 Icecube Tray Mold

Remix of the Dota Icecube Tray. Meant as mold for silicone or similar.

Double scaling in z for more depth/bigger cubes

Not tested yet, will post results when done.

Probably best finish off with coating to avoid sticking 



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p><em>Edit 10/29/2020: I DO NOT RECOMMEND YOU USE THIS STAND YET!!!  The current version (v1.1) muffles the Echo speaker due to it&apos;s open bottom design.</em></p>
<p>This is a work in progress.  </p>
<p>I like the angled look of 2020&apos;s 4th Gen Echo Dot, but have no need to buy another one.  I also have trouble with the wall mounted 3rd Gen in my kitchen.  It is under the cabinet, and in a landing spot for miscellaneous things.  As a result, the Echo can&apos;t hear us half the time.</p>
<p>I decided to make a stand that gives the 3rd gen some semblance of the angled and spherical look of it&apos;s successor.  It also gets Alexa out of the sound tunnel on the kitchen counter.</p>
<p>The mount is hollow, with a slot in back for cord storage.  It&apos;s a bit small for the entire cord, but does offer some utility.</p>
<p>This is v1.1 of my design.  It does the job, but the aesthetics aren&apos;t there yet.  I also shouldn&apos;t have used orange for my test.  The contrast against a black Echo puts a hurt on my eye balls.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kingroon KP-3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PETG&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PETG                    </a>

                    Orange
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>It is an easy print, but did need a wide brim due to the thin rim on bottom.  I trashed 2 attempts half way through because I forgot to add the brim in Cura.</p></div>
</body></html>

Echo Dot 3rd Gen Angled Hollowed Sphere Stand

*Edit 10/29/2020: I DO NOT RECOMMEND YOU USE THIS STAND YET!!!  The current version (v1.1) muffles the Echo speaker due to it's open bottom design.*

This is a work in progress.  

I like the angled look of 2020's 4th Gen Echo Dot, but have no need to buy another one.  I also have trouble with the wall mounted 3rd Gen in my kitchen.  It is under the cabinet, and in a landing spot for miscellaneous things.  As a result, the Echo can't hear us half the time.

I decided to make a stand that gives the 3rd gen some semblance of the angled and spherical look of it's successor.  It also gets Alexa out of the sound tunnel on the kitchen counter.

The mount is hollow, with a slot in back for cord storage.  It's a bit small for the entire cord, but does offer some utility.

This is v1.1 of my design.  It does the job, but the aesthetics aren't there yet.  I also shouldn't have used orange for my test.  The contrast against a black Echo puts a hurt on my eye balls.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>For Halloween or any other occasion, customize your Echo Dot by making it look like an UFO. The design comes in 2 different sizes. The upper part can print without support if you place it upside down. However, it could look a little bit rough depending on your printer (overhang angle is about 70&#xB0;). Other parts print well without support.</p>
<p>D&#xE9;corez votre appareil Amazon Echo Dot avec ce design d&apos;Ovni. Possibilit&#xE9; d&apos;imprimer avec deux tailles diff&#xE9;rentes. La partie sup&#xE9;rieur peut s&apos;imprimer sans support, &#xE0; condition de l&apos;imprimer &#xE0; l&apos;envers sur le plateau. Dans ce cas-l&#xE0;, selon l&apos;imprimante, la qualit&#xE9; d&apos;impression peut diminuer. Les autres parties s&apos;impriment sans support.</p>
<p>Param&#xE8;tres recommand&#xE9;s / Recommended settings :<br>
2+ walls<br>
+12% infill<br>
3+ top/bottom layers<br>
top/bottom pattern : concentric<br>
0.2 layer height </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Basic+PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        Basic PLA PLA                    </a>

                    Grey
</body></html>

UFO mount for Alexa / Design d'OVNI pour Alexa

For Halloween or any other occasion, customize your Echo Dot by making it look like an UFO. The design comes in 2 different sizes. The upper part can print without support if you place it upside down. However, it could look a little bit rough depending on your printer (overhang angle is about 70°). Other parts print well without support.

Décorez votre appareil Amazon Echo Dot avec ce design d'Ovni. Possibilité d'imprimer avec deux tailles différentes. La partie supérieur peut s'imprimer sans support, à condition de l'imprimer à l'envers sur le plateau. Dans ce cas-là, selon l'imprimante, la qualité d'impression peut diminuer. Les autres parties s'impriment sans support.

Paramètres recommandés / Recommended settings :
2+ walls
+12% infill
3+ top/bottom layers
top/bottom pattern : concentric
0.2 layer height 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Design for a reuseable and customizable Icecube Tray.</p>
<p>To make my own stamps, I loaded both the basic cube and the model to be replicated in Blender and used the Modifier-Boolean-Difference tool to get a proper imprint.</p>
<p>Important for making:</p>
<p>For good resolution best print the cubes on their side. For top-prints use Basic_cube_top_print. It has a larger hole due to higher tolerance in xy-plane. </p>
<p>!!!!! Print the stamps with high infill, or fill with water. Otherwise they will be pushed upward from the silicone. !!!!!</p>
<p>Alternatively you can manually push the stamps down until the silicone started hardening (usually about 30 mins)</p>
<p>For best results coat model and stamps with Anti-Adherent.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>
</body></html>

Reuseable and customizable Icecube Mold

Design for a reuseable and customizable Icecube Tray.

To make my own stamps, I loaded both the basic cube and the model to be replicated in Blender and used the Modifier-Boolean-Difference tool to get a proper imprint.


Important for making:

  For good resolution best print the cubes on their side. For top-prints use Basic_cube_top_print. It has a larger hole due to higher tolerance in xy-plane. 

!!!!! Print the stamps with high infill, or fill with water. Otherwise they will be pushed upward from the silicone. !!!!!

Alternatively you can manually push the stamps down until the silicone started hardening (usually about 30 mins)

For best results coat model and stamps with Anti-Adherent.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Voici des capots de protection pour un point rouge Bushell TRS-25. Le diam&#xE8;tre int&#xE9;rieur mesure 28 mm. Il y a des orifices pour installer un &#xE9;lastique de maintien. Le fichier SolidWorks est fourni.</p>
<p>Here are protective covers for a Bushell TRS-25 red dot. The inside diameter is 28 mm. There are holes to install a rubber band. SolidWorks file is provided.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Grossiste+3D+PLA&amp;tag=tv-auto-20" target="_blank">
                        Grossiste 3D PLA                    </a>

                    Black
</body></html>

Red Dot cap (Bushnell TRS-25)

Voici des capots de protection pour un point rouge Bushell TRS-25. Le diamètre intérieur mesure 28 mm. Il y a des orifices pour installer un élastique de maintien. Le fichier SolidWorks est fourni.

Here are protective covers for a Bushell TRS-25 red dot. The inside diameter is 28 mm. There are holes to install a rubber band. SolidWorks file is provided.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Well wasn&apos;t this frustrating, after 9 hours of printing I found out the cable coming out of the echo was too close to the bottom after all was said and done. :(  So another several hours redesigning things. I had issues trying to set the legs without pegs, and the main body broke due to a flaw in the original files for the echo holder I was using..</p>
<p>so... I completely rebuilt a lot of the parts, and then rebuilt them again after a final print. This design is now fully tested and printed and I had no issues anywhere. (yay :) )</p>
<ul><li>
<p>the echo holder (main v2) </p>
<ul><li>its a mm wider so that the echo doesnt stress it so much going in and out</li>
<li>The holding collar is thicker so that it has more rigidity</li>
<li>I removed the top cut-out (this cuts off 30 min of printing supports there and makes the top easier to handle)</li>
<li>The master cut outs are now curved so that there is even more strength to those areas</li>
<li>removed the odd peg system and put in 2 pegs for the legs, simple round pegs with logs of clearance, just to help to put into the right location without huge hassles</li>
<li>I recommend 50% fill for the holder, you want strength here, and it does not add much to print time</li>
</ul></li>
<li>
<p>the legs</p>
<ul><li>these are hollowed with tolerance for the new pegs body and feet</li>
<li>the cupped section will attach to the body</li>
</ul></li>
<li>
<p>The feet</p>
<ul><li>removed the odd shaped pegs and centered in new pegs, these have a good amount of tolerance as they are just to make sure the feet go in the right spot</li>
</ul></li>
<li>
<p>the ears </p>
<ul><li>rebuilt and cut to contour to the top</li>
<li>for a more fuller loot print out 2 sets of ears and glue them together </li>
<li>this is a very nice look</li>
</ul></li>
<li>the bow
<ul><li>The bow was contour cut to sit on the ears nicely </li>
</ul></li>
</ul><p>Assembly instructions</p>
<ul><li>I put the main holder on the desk, then put on the ears all flat to the desk</li>
<li>I placed the bow onto the ears and moved things until they nicely settled</li>
<li>I pulled the bow off and put on superglue then put the bow back onto the ears exactly</li>
<li>I let this set (if you arent using the bow just eye up the ears how and where you like them</li>
<li>If you opted for the nice full ears and printed them twice after the bow/ear combination has set you can now easily glue the halves together and set</li>
<li>I sanded the bottom of the legs to fit snug into the feet (just to remove elephants foot), if this is real snug no glue is needed</li>
<li>For the connections of the legs to the body, I used superglue and let it sit and dry nicely THEN attach the feet, this gives you the optimal chance to set everything nicely for balance as the feet placement can affect this. I didnt have any issues getting things up, the power cable adds a small point of contact, if this is an issue for you just stretch the legs on the Z-axis a few more MM</li>
<li>If you are gluing the feet to the legs use white glue for the connections so you get some time to play and settle things nice and flat</li>
<li>when the base and legs are dry, you can set the ears or ears/bow combination centered to the top and glue in place</li>
<li>enjoy your mickey/minnie echo stand :)</li>
</ul><p>My Print settings</p>
<ul><li>Everything printed at .30</li>
<li>bed 55 degrees (dropping it 10 degrees every 20 layers)</li>
<li>head 205 degrees</li>
<li>Supports for the bow (buildplate only) and the main body (everywhere)</li>
</ul><p>The original design here was for a google mini (<a rel="nofollow" href="/thing:3408715">https://www.thingiverse.com/thing:3408715</a>), Took a smart design and tore it down to made it work with the Amazon Echo Dot (Gen 3. I have labelled these for a multicolour print, I used Red from Amazed yellow from Simax3d and black from Geeetech. All worked well together.  The mickey parts where remixed and mostly rebuilt by me from the original google mini thing, the echo base was remixed and rebuilt from : <a rel="nofollow" href="/thing:3337820">https://www.thingiverse.com/thing:3337820</a>. </p>
<p>Options</p>
<ul><li>print out a second set of ears for a fuller look</li>
<li>glue all the legs together</li>
<li>if the cable coming out of the bottom bothers you, you have a few other options, drill holes in the top behind the ears/bow so that the cables can go there, or just rotate your echo and use the side ports. It&apos;s a versatile design to fit whatever works best for you. </li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.30</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>Body 50% - The rest 20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=geeetech%2C+simax3d%2C+Amz3d+TPU+&amp;tag=tv-auto-20" target="_blank">
                        geeetech, simax3d, Amz3d TPU                     </a>

                    Black, red, yellow
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>205 hot end<br>
55 bed (graduated to 0)<br>
60mm/s print speed<br>
(full supports for main body and bow only) (very minimal)</p></div>
</body></html>

Mickey/Minnie Echo Dot (3rd Gen) Stand (Multicolour print)

Well wasn't this frustrating, after 9 hours of printing I found out the cable coming out of the echo was too close to the bottom after all was said and done. :(  So another several hours redesigning things. I had issues trying to set the legs without pegs, and the main body broke due to a flaw in the original files for the echo holder I was using..

so... I completely rebuilt a lot of the parts, and then rebuilt them again after a final print. This design is now fully tested and printed and I had no issues anywhere. (yay :) )

- the echo holder (main v2) 
   - its a mm wider so that the echo doesnt stress it so much going in and out
   - The holding collar is thicker so that it has more rigidity
   - I removed the top cut-out (this cuts off 30 min of printing supports there and makes the top easier to handle)
   - The master cut outs are now curved so that there is even more strength to those areas
   - removed the odd peg system and put in 2 pegs for the legs, simple round pegs with logs of clearance, just to help to put into the right location without huge hassles
   - I recommend 50% fill for the holder, you want strength here, and it does not add much to print time

- the legs
  - these are hollowed with tolerance for the new pegs body and feet
  - the cupped section will attach to the body

- The feet
  - removed the odd shaped pegs and centered in new pegs, these have a good amount of tolerance as they are just to make sure the feet go in the right spot

- the ears 
  - rebuilt and cut to contour to the top
  - for a more fuller loot print out 2 sets of ears and glue them together 
  - this is a very nice look

- the bow
  - The bow was contour cut to sit on the ears nicely 

Assembly instructions
- I put the main holder on the desk, then put on the ears all flat to the desk
- I placed the bow onto the ears and moved things until they nicely settled
- I pulled the bow off and put on superglue then put the bow back onto the ears exactly
- I let this set (if you arent using the bow just eye up the ears how and where you like them
- If you opted for the nice full ears and printed them twice after the bow/ear combination has set you can now easily glue the halves together and set
- I sanded the bottom of the legs to fit snug into the feet (just to remove elephants foot), if this is real snug no glue is needed
- For the connections of the legs to the body, I used superglue and let it sit and dry nicely THEN attach the feet, this gives you the optimal chance to set everything nicely for balance as the feet placement can affect this. I didnt have any issues getting things up, the power cable adds a small point of contact, if this is an issue for you just stretch the legs on the Z-axis a few more MM
- If you are gluing the feet to the legs use white glue for the connections so you get some time to play and settle things nice and flat
- when the base and legs are dry, you can set the ears or ears/bow combination centered to the top and glue in place
- enjoy your mickey/minnie echo stand :)

My Print settings
- Everything printed at .30
- bed 55 degrees (dropping it 10 degrees every 20 layers)
- head 205 degrees
- Supports for the bow (buildplate only) and the main body (everywhere)


The original design here was for a google mini (https://www.thingiverse.com/thing:3408715), Took a smart design and tore it down to made it work with the Amazon Echo Dot (Gen 3. I have labelled these for a multicolour print, I used Red from Amazed yellow from Simax3d and black from Geeetech. All worked well together.  The mickey parts where remixed and mostly rebuilt by me from the original google mini thing, the echo base was remixed and rebuilt from : https://www.thingiverse.com/thing:3337820. 

Options
- print out a second set of ears for a fuller look
- glue all the legs together
- if the cable coming out of the bottom bothers you, you have a few other options, drill holes in the top behind the ears/bow so that the cables can go there, or just rotate your echo and use the side ports. It's a versatile design to fit whatever works best for you. 





<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Remix of MrFreakMan87&apos;s Echo Dot Gen 3 wall mount. </p>
<p>Uses eight 8x3mm magnets (available in Canada here: <a rel="nofollow" href="https://www.amazon.ca/dp/B0895MFWYX/?coliid=I1MXDBB3IW1XWZ&amp;colid=1TK1N7EHOHLOZ&amp;psc=1&amp;ref_=lv_ov_lig_dp_it&amp;tag=tv-auto-20">https://www.amazon.ca/dp/B0895MFWYX/?coliid=I1MXDBB3IW1XWZ&amp;colid=1TK1N7EHOHLOZ&amp;psc=1&amp;ref_=lv_ov_lig_dp_it</a>)</p>
<p>Removed the watermark from the original. </p>
<p>Magnets press in with a little force. Haven&apos;t had any fall out yet. Sticks well to a metal door or sheet steel. Seems to slide down a bit under the weight of the Dot on a glossy surface like a refrigerator.</p>
<p>I printed mine on its back to ensure consistency for the magnet holes. You might be able to get away from using supports if you were to print it standing up.</p>
<p>Used 3D Honeycomb for infill pattern. 25% may have been overkill, but again, wanted to ensure strength of part for pressing the magnets in.</p>
<p>Printed on Prusa Mini using textured spring steel sheet.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Steel</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=AMZ3D+PLA&amp;tag=tv-auto-20" target="_blank">
                        AMZ3D PLA                    </a>

                    Black
</body></html>

Magnetic Mount for Echo Dot Gen 3

Remix of MrFreakMan87's Echo Dot Gen 3 wall mount. 

Uses eight 8x3mm magnets (available in Canada here: https://www.amazon.ca/dp/B0895MFWYX/?coliid=I1MXDBB3IW1XWZ&colid=1TK1N7EHOHLOZ&psc=1&ref_=lv_ov_lig_dp_it)

Removed the watermark from the original. 

Magnets press in with a little force. Haven't had any fall out yet. Sticks well to a metal door or sheet steel. Seems to slide down a bit under the weight of the Dot on a glossy surface like a refrigerator.

I printed mine on its back to ensure consistency for the magnet holes. You might be able to get away from using supports if you were to print it standing up.

Used 3D Honeycomb for infill pattern. 25% may have been overkill, but again, wanted to ensure strength of part for pressing the magnets in.

Printed on Prusa Mini using textured spring steel sheet.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design variant of an Amazon Alexo Dot Gen3 wall socket housing.</p>
<p>The device and the power supply fit nice and tight into the housing.</p>
<p>Got inspired by:</p>
<p><a rel="nofollow" href="/thing:2701958">https://www.thingiverse.com/thing:2701958</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Redline+PLA&amp;tag=tv-auto-20" target="_blank">
                        Redline PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Prints nicely in roughly 7 hours. No support required.</p></div>
</body></html>

Wall Socket Housing for Alexa Echo Dot Gen 3

My design variant of an Amazon Alexo Dot Gen3 wall socket housing.

The device and the power supply fit nice and tight into the housing.


Got inspired by:

https://www.thingiverse.com/thing:2701958

<html><head></head><body><div class="text-auto-link">
                                            <p>Pucci, is your faithful assistant pup! sweet and cute, suitable for every living room, loves nibbling smat assistants like Alexa Echo Dot and Google Home Mini.<br>Soon his friends will arrive!</p>
<p>&#xA0;</p>
<p>#SMARTASSISTANT3D @MyMiniFactory @3DWOX_Sindoh</p>
										</div>
                                    								</body></html>

Pucci the Smart Pet Assistant

 Pucci, is your faithful assistant pup! sweet and cute, suitable for every living room, loves nibbling smat assistants like Alexa Echo Dot and Google Home Mini.Soon his friends will arrive! #SMARTASSISTANT3D @MyMiniFactory @3DWOX_Sindoh 

<p><iframe width="593" height="370" src="//www.youtube.com/embed/1CB3UVmEcB0" frameborder="0" allowfullscreen></iframe></p>

<p>POV LED Wand<br>
In this project we&#x2019;ll show you how to build a POV LED wand. Adafruit DotStar&#x2019;s deliver high speed PWM making them great for Persistence Of Vision. It&#x2019;s powered by Adafruit&#x2019;s Circuit Python, making it really easy to change and modify. The Adafruit Feather shows up as a USB drive so you can drag and drop the code. The handle and wand were designed to be 3D printed and houses all of the electronics.</p>

<p>Full Tutorial Learning Guide:<br>
<a href="https://learn.adafruit.com/circuitpython-painter/" rel="external">https://learn.adafruit.com/circuitpython-painter/</a></p>

<p>Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!</p>

<p>Visit the Adafruit shop online - <a href="http://www.adafruit.com" rel="external">http://www.adafruit.com</a></p>


CircuitPython POV DotStar LED Wand



POV LED Wand
In this project we’ll show you how to build a POV LED wand. Adafruit DotStar’s deliver high speed PWM making them great for Persistence Of Vision. It’s powered by Adafruit’s Circuit Python, making it really easy to change and modify. The Adafruit Feather shows up as a USB drive so you can drag and drop the code. The handle and wand were designed to be 3D printed and houses all of the electronics.

Full Tutorial Learning Guide:
https://learn.adafruit.com/circuitpython-painter/

Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Visit the Adafruit shop online - http://www.adafruit.com


Thingscanner

Some articles you might like

20 Best Amazon Echo Dot Accessories to 3D Print | All3DP

3D Print a Mini Commodore PET with A Working LED Screen | All3DP

Gramazon: Turn Your Amazon Echo Dot Into a Gramophone with 3D Printing | All3DP

Show Only

Looking for tag: dot