Already celebrated for its affordability and build size, the Creality CR-10 is currently available on GearBest and Banggood for 28% off or more. Check out these two deals and get your hands on one of the most popular budget 3D printers on the market. 

[DEAL] Creality CR-10 3D Printer, Over 28% Off | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.</p>
<p>This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.</p>
<p>The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.</p>
<p>The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be &quot;worked&quot; a little after assembly before its mounted on the printer.</p>
<p>This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.</p>
<p>BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement</p>
<p>You need a total of 25 links, and about 30 clips</p>
<p>Mounted to the frame with 2X M4 T nuts</p>
<p>The fanduct is a remake of<br><a rel="nofollow" href="/thing:4091776">https://www.thingiverse.com/thing:4091776</a></p>
<p>The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.</p>
<p>You can find the fan mount here<br><a rel="nofollow" href="/thing:4616767">https://www.thingiverse.com/thing:4616767</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kay3D Core XY  Ender 5 plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Form+Futura+PLA&amp;tag=tv-auto-20" target="_blank">
                        Form Futura PLA                    </a>

                    Black
</body></html>

Ender 5 plus, KAY3D CoreXY, Modification pack.

This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.

This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.
 
The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.

The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be "worked" a little after assembly before its mounted on the printer.

This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.

BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement

You need a total of 25 links, and about 30 clips

Mounted to the frame with 2X M4 T nuts

The fanduct is a remake of
https://www.thingiverse.com/thing:4091776

The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.

You can find the fan mount here
https://www.thingiverse.com/thing:4616767

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I didn&apos;t want to have my spool on top of my machine due to lack of space. But no easy way to guide the filament or being able to find one made me decide to make this little peg.<br>
You can hand thread a PC4-M6 fitting in the hole and use your left over bowden tube to guide the filament from the bottom.</p>
<p>Seeing as this is a structural part print with 100% infill</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Fiberlogy_Filaments+PETG&amp;tag=tv-auto-20" target="_blank">
                        Fiberlogy_Filaments PETG                    </a>

                    Transparant green
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>Remove supports and thread in a PC4-M6</p></div>
</body></html>

Hydra Fan Duct Stock Ender 5 Pro Direct drive Extruder Mount & Fillament Guide

I didn't want to have my spool on top of my machine due to lack of space. But no easy way to guide the filament or being able to find one made me decide to make this little peg.
You can hand thread a PC4-M6 fitting in the hole and use your left over bowden tube to guide the filament from the bottom.

Seeing as this is a structural part print with 100% infill

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just a little help when dealing with the filament.<br>
I could not find one for my extruder.<br>
Please handle the cura file with care.<br>
It works perfect with my printer but others might behave different.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>48%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Devil+Design+PETG&amp;tag=tv-auto-20" target="_blank">
                        Devil Design PETG                    </a>

                    Transparent
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Actually it&#xB4;s a CR10 V2 but I can&#xB4;t find it at the table.</p></div>
</body></html>

CR10 V2 filament extruder snap lever

Just a little help when dealing with the filament.
I could not find one for my extruder.
Please handle the cura file with care.
It works perfect with my printer but others might behave different.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Bonjour,</p>
<p>Voici un support pour installer un BL Touch sur la Ender 3 V2, bvous trouverez aussi une mire de v&#xE9;rification du nivelage du plateau adapt&#xE9;e &#xE0; la Ender 3. J&apos;explique tout dans ma vid&#xE9;o.</p>
<p>Ce support est un remix du support : <a rel="nofollow" href="/thing:4462870">https://www.thingiverse.com/thing:4462870</a><br>
Lien vers le firmware : <a rel="nofollow" href="https://smith3d.com/ender-3-v2-bltouch-firmware-installation-guide-by-smith3d-com/">https://smith3d.com/ender-3-v2-bltouch-firmware-installation-guide-by-smith3d-com/</a></p>
<p>Bonne installation</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PLA&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PLA                    </a>

                    Black
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/6eyW0VWIcWg" frameborder="0" allowfullscreen></iframe></p>
</body></html>

Ender3 V2 BL TOUCH bracket

Bonjour,

Voici un support pour installer un BL Touch sur la Ender 3 V2, bvous trouverez aussi une mire de vérification du nivelage du plateau adaptée à la Ender 3. J'explique tout dans ma vidéo.

Ce support est un remix du support : https://www.thingiverse.com/thing:4462870
Lien vers le firmware : https://smith3d.com/ender-3-v2-bltouch-firmware-installation-guide-by-smith3d-com/

Bonne installation

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple an light hotend adapter<br>
need&apos;s a 5015 blower fan an a PC-4 M10 fitting</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Random+PETG&amp;tag=tv-auto-20" target="_blank">
                        Random PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Just use normal settings for PETG.<br>
i will print this in resin.</p></div>
</body></html>

Hotend mount for NF-Crazy on Ender 5

Simple an light hotend adapter 
need's a 5015 blower fan an a PC-4 M10 fitting

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I like KaminoKGY&apos;s design, but the lower bolt slot turned out to be a weak spot that kept snapping on my setup, so I used Tinkercad to fuse a 2mm-wide bar across the mouth for reinforcement. It doesn&apos;t interfere with the Z lead screw, and there are now no dangling bits to break off.</p>
<p>Adding wide washers between the mount and the bolt heads (see photo) should help spread the bolts&apos; pressure and improve grip, even for the original design.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SunLu+PLA&amp;tag=tv-auto-20" target="_blank">
                        SunLu PLA                    </a>

                    Cyan
</body></html>

Filament Runout Sensor Mount Strong Ender 3, Reinforced

I like KaminoKGY's design, but the lower bolt slot turned out to be a weak spot that kept snapping on my setup, so I used Tinkercad to fuse a 2mm-wide bar across the mouth for reinforcement. It doesn't interfere with the Z lead screw, and there are now no dangling bits to break off.

Adding wide washers between the mount and the bolt heads (see photo) should help spread the bolts' pressure and improve grip, even for the original design.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This cleans up the look of the rail and protects the belt if you happen to grab it when moving the printer around.</p>
<p>On the original, a handful of comments talked about how the printer bed would run into it when the y axis was at 230mm+, so I removed the overhang section and cleaned it up a little. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Inland+PLA&amp;tag=tv-auto-20" target="_blank">
                        Inland PLA                    </a>

                    Black
</body></html>

Ender 3 Pro Thin Rail Cover 

This cleans up the look of the rail and protects the belt if you happen to grab it when moving the printer around.

On the original, a handful of comments talked about how the printer bed would run into it when the y axis was at 230mm+, so I removed the overhang section and cleaned it up a little. 


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>If you have modded your Creality printer (Ender 3, CR-10 etc.) to convert from bowden to direct drive, you might wonder what to do about that hole where the extruder was mounted.</p>
<p>Well, why not put the rubber ducky that comes with Bigtreetech products (e.g. SKR mini E3) there!</p></div>
</body></html>

BTT Rubber Duck Mount for Stepper Location (Ender 3 Extruder)

If you have modded your Creality printer (Ender 3, CR-10 etc.) to convert from bowden to direct drive, you might wonder what to do about that hole where the extruder was mounted.

Well, why not put the rubber ducky that comes with Bigtreetech products (e.g. SKR mini E3) there!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>the originial didn&apos;t fit any of my tools...<br>
redone in freecad (inspired by Sterby &apos;s version) </p>
<p>tollerance is 0.4mm for a soso fit. plus measured all the tool so it would fit right. </p>
<p>fits the 1.5,2,2.5,3,4,5 mm hex keys plus the 2 wrenches. </p>
<p>if you have elephants foot things might need a bit convincing to fit at first otherwise it should be loose. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.22</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=AMZN+PLA&amp;tag=tv-auto-20" target="_blank">
                        AMZN PLA                    </a>

                    Any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>no support required print upright. </p></div>
</body></html>

Ender 3 Pro Tool Holder (remix)

the originial didn't fit any of my tools... 
redone in freecad (inspired by Sterby 's version) 

tollerance is 0.4mm for a soso fit. plus measured all the tool so it would fit right. 

fits the 1.5,2,2.5,3,4,5 mm hex keys plus the 2 wrenches. 

if you have elephants foot things might need a bit convincing to fit at first otherwise it should be loose. 



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design for a camera and raspberry pi mount for my Creality Cr-10s Pro.  A camera is absolutely necessary for the spaghetti detective. On my website you will find the whole project.<br><a rel="nofollow" href="https://idea-empire.jimdofree.com/3d-druck/digitalisierung/">https://idea-empire.jimdofree.com/3d-druck/digitalisierung/</a></p>
<p>I included a focus tool for the raspberry pi camera.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-title"><strong>Digitalization and automation</strong></p>
                <div><p>Simple printer can&#xB4;t be connected to the WLAN. So I searched for a solution and I found one where a raspberry pi and a raspicam are needed. I wanted to mount it directly in a convenient way to my printer and this is my solution.</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/7e/27/5f/67/8c/IMG_1824.jpg"></p>
                <p class="detail-caption"><strong>The whole setup</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/95/bf/1e/20/4a/Unbenannt2.png"></p>
                <p class="detail-caption"><strong>The view of the camera in octoprint</strong></p>
</body></html>

3D printer digitalization and automation

My design for a camera and raspberry pi mount for my Creality Cr-10s Pro.  A camera is absolutely necessary for the spaghetti detective. On my website you will find the whole project. 
https://idea-empire.jimdofree.com/3d-druck/digitalisierung/

I included a focus tool for the raspberry pi camera.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Summary<br>
Couldn&apos;t find a mount for the BTT Smart Filament Sensor that quite suited my needs so I made this. This was made in TinkerCad and I&apos;m very new to modeling and 3D Printing so it&apos;s pretty basic.</p>
<p>The mount is designed to be mounted under the top-mounted Spool Holder. You will need two longer M5 screws (I believe I used M5 *10).</p>
<p>You&apos;ll probably want at least 30% infill so it doesn&apos;t crush when you mount it, and supports are probably a good idea so the housing prints correctly.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Black
</body></html>

BTT Smart Filament Sensor Mount

Summary
Couldn't find a mount for the BTT Smart Filament Sensor that quite suited my needs so I made this. This was made in TinkerCad and I'm very new to modeling and 3D Printing so it's pretty basic.

The mount is designed to be mounted under the top-mounted Spool Holder. You will need two longer M5 screws (I believe I used M5 *10).

You'll probably want at least 30% infill so it doesn't crush when you mount it, and supports are probably a good idea so the housing prints correctly.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A remix from <a rel="nofollow" href="/thing:2622296">https://www.thingiverse.com/thing:2622296</a></p>
<p>You can put this holder on the left side of the printer. Feel free to modify the Fusion 360 file if you want add or edit something.</p>
<p>Added :</p>
<ul><li>Usb Holder</li>
<li>Tweezers Holder</li>
<li>Needle Holder</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>
</body></html>

Ender 2 Tools Holder

 A remix from https://www.thingiverse.com/thing:2622296

You can put this holder on the left side of the printer. Feel free to modify the Fusion 360 file if you want add or edit something.

Added :

+ Usb Holder
+ Tweezers Holder
+ Needle Holder



Thingscanner

Some articles you might like

[DEAL] Creality CR-10 3D Printer, Over 28% Off | All3DP

Show Only

Looking for tag: creality