Learn how to turn your camera into a 3D scanner. With an ordinary camera and some clever software, you can have your own 3D scanning camera.

3D Scanning Camera: Turn a Camera into a 3D Scanner | All3DP

The prospect of making a camera using a consumer 3D printer seems silly. After all, accurately capturing light is a delicate affair, right? Find out as we explore the possibility of a 3D printed camera.

3D Printed Camera – Is It Possible to 3D Print a Camera? | All3DP

3D Printing camera modder Camerhack has just released an adapter to fit 35mm film into Kodak's iconic 126 film Instamatic camera.

3D Printed Camerhack Adapter Allows Old Instamatic Cameras To Use 35mm Film | All3DP

A simple camera board takes your beloved micro-computer to a whole new level. Here are the best 3D printable Raspberry Pi camera cases.  If you’re looking to add a camera model for your micro, you can choose from different makes and models. The original camera has been updated to version 2.0, which gives you a much […]

The Best Free Raspberry Pi Camera Cases to 3D Print | All3DP

The SLO is a unique analogue camera with 3D printed camera lenses, made by engineer Amos Dudley with stereolithography on a Form 2 3D printer.

3D Printed Camera Lenses with Stereolithography | All3DP

HP releases Z 3D Camera which is offers the 3D scanning capabilities of the Sprout Pro PC in a portable camera accessory which attaches to your computer.

HP Z 3D Camera Offers HP Sprout’s 3D Scanning Capabilities For a Fraction of the Price | All3DP

This 3D printed floater lets you film underwater while the camera swims freely in a river or on a lake or the sea.

3D Printed GoPro Camera Floater | All3DP

Tilt-Shift Adapters for DSLR cameras are great, but expensive. Why not use 3D Printed Camera Gear? Here’s how.

3D Printed Camera Gear: Tilt-Shift Adapters | All3DP

Have you ever been on set only to realize you could use some more gear? If you have, then you're ready for 3D printed camera gear.

3D Printed Camera Gear: Save Some Money! | All3DP

Using a 3D printer, Arduino and off the shelf parts, the Ruiz Brothers at Adafruit show us how to build a thermographic camera with a classic snapper body.

3D Print Your Own Thermal Imaging Camera | All3DP

Ever heard of Blender's camera tracking? Follow along as we track objects in a video, create a 3D scene, and add models as if they were in the video itself!

Blender Camera Tracking Tutorial: 6 Easy Steps | All3DP

This American drone fanatic was having troubles with expensive GoPro camera case replacements after crashes.

3D Printed GoPro Camera Case Protects Drone During Crash | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Designed a little canopy for the &quot;eachine tyro69&quot; kit. It fits a Caddix Turbo EOS2 and the vtx which is included in the kit.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Anet A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA                    </a>

                    Black
</body></html>

20x20mm canopy fpv

Designed a little canopy for the "eachine tyro69" kit. It fits a Caddix Turbo EOS2 and the vtx which is included in the kit.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A fairly quick design I put together to allow the use of Micro Four Thirds (M4/3) lenses on CS mount cameras. In my case I am using it with a ribcage modded GoPro Hero 4. I only have two native M4/3 mount lenses, but I have a quite a few old manual lenses of several different mounts and the corresponding adapters to M4/3, so this is the easiest way to use those old lenses on a CS mount camera. Anything you can adapt to M4/3 you can now adapt to CS mount, including ridiculous combinations like huge cine lenses. Note that the crop factor with 35mm/full frame lenses will be pretty extreme, 4x or more.<br>
You could use this with a C mount camera no problem, but it would effectively act like a macro extension tube, and your focus distance would be really short, which could certainly be useful. I would have made the adapter between C mount and M4/3 instead of CS mount, but the difference in flange focal distance between C mount and M4/3 is less than 2mm, not enough to squeeze and adapter in. CS gives me 5mm extra to work with, so I went with that as many C mount cameras work with CS mount lenses as well.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Select Mini</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSun+PETG&amp;tag=tv-auto-20" target="_blank">
                        eSun PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I got the best results printing the threads facing up, with a support enforcer just in the  central large overhang area, 0.15mm layer height.</p></div>
</body></html>

C Mount (CS Mount) to Micro Four Thirds/MFT adapter

A fairly quick design I put together to allow the use of Micro Four Thirds (M4/3) lenses on CS mount cameras. In my case I am using it with a ribcage modded GoPro Hero 4. I only have two native M4/3 mount lenses, but I have a quite a few old manual lenses of several different mounts and the corresponding adapters to M4/3, so this is the easiest way to use those old lenses on a CS mount camera. Anything you can adapt to M4/3 you can now adapt to CS mount, including ridiculous combinations like huge cine lenses. Note that the crop factor with 35mm/full frame lenses will be pretty extreme, 4x or more.
You could use this with a C mount camera no problem, but it would effectively act like a macro extension tube, and your focus distance would be really short, which could certainly be useful. I would have made the adapter between C mount and M4/3 instead of CS mount, but the difference in flange focal distance between C mount and M4/3 is less than 2mm, not enough to squeeze and adapter in. CS gives me 5mm extra to work with, so I went with that as many C mount cameras work with CS mount lenses as well.



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Lorex Doorbell mount at a 10 degree angle downward</p>
<p>Mounts to standard siding</p>
<p>Need 2x #6 outdoor screws 2.00&quot; long. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>0%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PETG%2CABS%2CPLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PETG,ABS,PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Nothing needed to print this. </p>
<p>Wall thickness is small enough to not need infill. </p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-caption"><strong>Used OnShape to design</strong></p>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/f6/3d/38/8c/8c/Untitled.png"></p>
</body></html>

Lorex doorbell siding mount

Lorex Doorbell mount at a 10 degree angle downward

Mounts to standard siding

Need 2x #6 outdoor screws 2.00" long. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My design for a camera and raspberry pi mount for my Creality Cr-10s Pro.  A camera is absolutely necessary for the spaghetti detective. On my website you will find the whole project.<br><a rel="nofollow" href="https://idea-empire.jimdofree.com/3d-druck/digitalisierung/">https://idea-empire.jimdofree.com/3d-druck/digitalisierung/</a></p>
<p>I included a focus tool for the raspberry pi camera.</p></div>
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-title"><strong>Digitalization and automation</strong></p>
                <div><p>Simple printer can&#xB4;t be connected to the WLAN. So I searched for a solution and I found one where a raspberry pi and a raspicam are needed. I wanted to mount it directly in a convenient way to my printer and this is my solution.</p></div>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/7e/27/5f/67/8c/IMG_1824.jpg"></p>
                <p class="detail-caption"><strong>The whole setup</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/95/bf/1e/20/4a/Unbenannt2.png"></p>
                <p class="detail-caption"><strong>The view of the camera in octoprint</strong></p>
</body></html>

3D printer digitalization and automation

My design for a camera and raspberry pi mount for my Creality Cr-10s Pro.  A camera is absolutely necessary for the spaghetti detective. On my website you will find the whole project. 
https://idea-empire.jimdofree.com/3d-druck/digitalisierung/

I included a focus tool for the raspberry pi camera.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Habe diesen Halter f&#xFC;r die DJI Airunit mit L&#xFC;ftung und Gimbal designed, um sie in meinem 1/8er Truggy oder in einem Flieger unter zu bringen. Damit sie nicht &#xFC;berhitzt, mit Aufnahme f&#xFC;r einen 40er L&#xFC;fter. </p>
<p>!Die L&#xFC;fteraufnahme muss aus TPU gedruckt werden, sonst kriegt ihr den L&#xFC;fter nicht rein!</p>
<p>F&#xFC;r das Gimbal braucht Ihr noch:</p>
<p>-1x 9g Servo  ( <a rel="nofollow" href="https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&amp;_asc=4724705239">https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&amp;_asc=4724705239</a> )<br>
-2x Kugellager DIN 938-2 (2x5x2,3)<br>
-2x Schraube M2x5</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=other++TPU+PLA&amp;tag=tv-auto-20" target="_blank">
                        other  TPU PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div></div>
</body></html>

Gimbal for DJI Airunit + Fan holder

Habe diesen Halter für die DJI Airunit mit Lüftung und Gimbal designed, um sie in meinem 1/8er Truggy oder in einem Flieger unter zu bringen. Damit sie nicht überhitzt, mit Aufnahme für einen 40er Lüfter. 

!Die Lüfteraufnahme muss aus TPU gedruckt werden, sonst kriegt ihr den Lüfter nicht rein!

Für das Gimbal braucht Ihr noch:

-1x 9g Servo  ( https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=4724705239 )
-2x Kugellager DIN 938-2 (2x5x2,3)
-2x Schraube M2x5



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple slider shutter for homemade box cameras (not good for rounded cameras). Preferably print in black with a somewhat high infill as the shutter is quite thin and must be lightproof to be useful.</p>
<p>The shutter channel is upside down on the print file so there is no overhang.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>based on other photo 3d prints I&apos;ve seen, these settings should be good enough for the shutter to work. Since I&apos;m not near an available printer, I&apos;ve just posted the model hoping someone can test it for me.</p></div>
</body></html>

Slider Shutter for homemade cameras

Simple slider shutter for homemade box cameras (not good for rounded cameras). Preferably print in black with a somewhat high infill as the shutter is quite thin and must be lightproof to be useful.

The shutter channel is upside down on the print file so there is no overhang.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I designed this mount after purchasing a 2021 Winnebago Micro Minnie 2100BH which has a plate and socket for another brand of camera that it came with. Their socket wires up to the running lights, so the camera will be powered so long as your lights are on. Somewhat less desirable than wiring to the backup lights, but this way you can use the camera without being in reverse, so maybe its a win.</p>
<p>I found the signal strength of the Garmin BC-35 to be inadequate to go through the camper to the dashboard of the car. This necessitated me mounting the transmitted box on the roof of the camper. While I COULD have potentially made a mess out of the ceiling of my new Winnebago I decided not to go the route of mounting it inside. Nobody sees the roof anyway.</p>
<p>I printed this in ASA which is really durable outdoors and IMHO easier to print with than ABS.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Sidewinder X1</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30% - Gyroid</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+ASA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker ASA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed on PEI sheet at 260 degree C with a 90 degree C bed.  No heated enclosure was used. Gyroid infill seems to help with no buckling.</p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-title"><strong>sanding and prep</strong></p>
                <div><p>remove any boogers or stringiness with medium grit sandpaper. You can smooth ASA with acetone too if you want. I spray painted with a brown / bronze metallic rustoleum &quot;Fusion&quot; spray paint which stick to plastic well. 2 light coats, one heavier coat. </p>
<p>I used loctite marine polyurethane adhesive sealant to attach it to the back of the trailer, tucking the crimped and heat shrinked wire splices behind the plate. The power wire for the transmitted module runs out the bottom wire hole in the plate up behind the camera and into a wire conduit along with the camera wire to a watertight junction box that I screwed and sealed onto the roof of the camper to the side of the air conditioner unit. This allow the camera to reliably pair and transmit to the RV-785 GPS unit inside the car. Testing with the transmitter box on the back of the trailer yielded too unreliable of results.</p></div>
</body></html>

Garmin BC-35 mount for Winnebago Micro Minnie

I designed this mount after purchasing a 2021 Winnebago Micro Minnie 2100BH which has a plate and socket for another brand of camera that it came with. Their socket wires up to the running lights, so the camera will be powered so long as your lights are on. Somewhat less desirable than wiring to the backup lights, but this way you can use the camera without being in reverse, so maybe its a win.

I found the signal strength of the Garmin BC-35 to be inadequate to go through the camper to the dashboard of the car. This necessitated me mounting the transmitted box on the roof of the camper. While I COULD have potentially made a mess out of the ceiling of my new Winnebago I decided not to go the route of mounting it inside. Nobody sees the roof anyway.

I printed this in ASA which is really durable outdoors and IMHO easier to print with than ABS.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Back cover for the DJI FPV camera. Use the screws provided with the camera, no other gear necessary.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>SeeMeCNC</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2GEXcmB?tag=tv-auto-20" target="_blank">Rostock MAX v2</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA+%2F+PETG&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA / PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Print with the flat surface on the print bed for an easier impression.</p></div>
</body></html>

DJI Back Cover

Back cover for the DJI FPV camera. Use the screws provided with the camera, no other gear necessary.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Motorized microscope project made from recycled elements from a CNC and the new HQ camera for Raspberry Pi.</h3>
<p>The HTML command interface was developed in Python. It is accessible from the local network and allows you to zoom and control the NeoPixels LED lighting.</p>
<h3>Parts to 3D print</h3>
<ul><li>Support for 12.3MP HQ camera to be fixed on the linear guide of a T8 screw</li>
<li>Support for Neopixel 16 LED lighting (diam. 30mm) compatible with 4K C-mount lens</li>
<li>Raspberry Pi support (3 or 4) to be fixed on a 2020 aluminum profile using a T-nut</li>
<li>Extension tube (optional)</li>
</ul><h3>HQ camera and other components used</h3>
<ul><li><a rel="nofollow" href="https://s.click.aliexpress.com/e/_ArT8CJ">12MP HQ Camera module</a></li>
<li><a rel="nofollow" href="https://s.click.aliexpress.com/e/_ACyuyb">4K 50mm C-mount lens</a> or equivalent</li>
<li>x1 Motor <a rel="nofollow" href="https://amzn.to/37Z5YMi?tag=tv-auto-20">Nema 17HS4401</a> or equivalent</li>
<li>x1 stepper motor driver <a rel="nofollow" href="https://amzn.to/2TLUrHL?tag=tv-auto-20">A4988</a> or <a rel="nofollow" href="https://amzn.to/3jKHZCI?tag=tv-auto-20">DRV8825</a></li>
<li>x1 <a rel="nofollow" href="https://amzn.to/3mPEg8Z?tag=tv-auto-20">4 pin cable</a> for Nema motor</li>
<li>x1 <a rel="nofollow" href="https://www.banggood.com/fr/search/power-supply-module-5v-12v/0-0-0-1-1-60-0-price-0-0_p-2.html?p=RA18043558422201601Y">mini power supply module</a> multi-voltages delivering at least 5V and 12V</li>
<li>x1 LED ring &#xF8;32mm (<a rel="nofollow" href="https://amzn.to/34Nm9KG?tag=tv-auto-20">x16 LED RGB NeoPixel</a>)</li>
<li><a rel="nofollow" href="https://amzn.to/2TJ5txu?tag=tv-auto-20">Raspberry Pi</a>(model of your choice). The bracket is compatible with models 3 and 4</li>
</ul><h3>Recycled components from a <a rel="nofollow" href="https://amzn.to/3oQmzrC?tag=tv-auto-20">CNC 3018</a> used for the stand:</h3>
<ul><li>x2 aluminum profiles 2020 (square section 20x20mm) of length 220mm approximately</li>
<li>x2 2020 aluminum profiles (square section 20x20mm) approximately 350mm long</li>
<li>x4 30mm brackets</li>
<li>T-nuts for aluminum profile 2020</li>
<li>x2 rods &#xF8;10mm length 400mm mini</li>
<li>x2 linear guides &#xF8;10mm</li>
<li>x4 supports for rod &#xF8;10mm</li>
<li>x1 Nema motor board</li>
<li>x1 T8 screw of minimum length 350mm</li>
<li>x1 direct screw transmission element</li>
<li>x1 flexible connection &#xF8;8mm</li>
</ul><h3>Useful links</h3>
<ul><li><a rel="nofollow" href="https://diyprojects.io/motorized-microscope-hq-camera-raspberry-pi-python-html-interface/">Step by step tutorial</a></li>
<li><a rel="nofollow" href="https://github.com/projetsdiy/Raspberry-Pi-Projects/tree/main/HQ%20Camera/Motorized%20microscope">Github Repo</a></li>
<li><a rel="nofollow" href="https://diyprojects.io/drive-nema-17-stepper-motor-rpimotorlib-python-library-a4988/">Python code to drive Nema 17 stepper motor</a></li>
<li><a rel="nofollow" href="https://diyprojects.io/price-csi-cameras-raspberry-pi-hq-cmount-camera-8mp-noir-5mp-ribon-lens-tripod-microscope/">Cameras for Raspberry Pi and accessories (C-mount lenses, extension ring, CSI tape, tripod, microscope holder</a></li>
<li><a rel="nofollow" href="https://diyprojects.io/components-diy-3d-printer-profiles-tnut-nema-17-a4899/">Selection of components</a> for 3D printers and CNCs that can be used in DIY.</li>
</ul><h3>Projet de microscope motoris&#xE9; r&#xE9;alis&#xE9; &#xE0; partir d&apos;&#xE9;l&#xE9;ments recycl&#xE9;s d&apos;une CNC et de la nouvelle cam&#xE9;ra HQ pour Raspberry Pi.</h3>
<p>L&apos;interface de commande HTML a &#xE9;t&#xE9; d&#xE9;velopp&#xE9;e en Python. Elle est accessible depuis le r&#xE9;seau local et permet de zoomer et de piloter l&apos;&#xE9;clairage &#xE0; LED NeoPixels.</p>
<h3>Pi&#xE8;ces &#xE0; imprimer en 3D</h3>
<ul><li>Support pour cam&#xE9;ra HQ 12,3MP &#xE0; fixer sur le guidage lin&#xE9;aire d&apos;un vis T8</li>
<li>Support pour &#xE9;clairage Neopixel 16 LED (diam. 30mm) compatible objectif 4K &#xE0; monture C</li>
<li>Support Raspberry Pi (3 ou 4) &#xE0; fixer sur un profil&#xE9; aluminium 2020 &#xE0; l&apos;aide d&apos;un &#xE9;crou en T</li>
<li>Tube allonge (optionnel)</li>
</ul><h3>Cam&#xE9;ra HQ et autre composants utilis&#xE9;s</h3>
<ul><li><a rel="nofollow" href="https://s.click.aliexpress.com/e/_ArT8CJ">Cam&#xE9;ra HQ 12MP</a></li>
<li><a rel="nofollow" href="https://s.click.aliexpress.com/e/_ACyuyb">Objectif 50mm &#xE0; monture C par cam&#xE9;ra 4K</a> ou &#xE9;quivalent</li>
<li>x1 Moteur <a rel="nofollow" href="https://amzn.to/383fWMw?tag=tv-auto-20">Nema 17HS4401</a> ou &#xE9;quivalent</li>
<li>x1 pilote pour moteur pas &#xE0; pas <a rel="nofollow" href="https://amzn.to/2Gk0BM9?tag=tv-auto-20">A4988</a> ou <a rel="nofollow" href="https://amzn.to/3jPm79k?tag=tv-auto-20">DRV8825</a></li>
<li>x1 <a rel="nofollow" href="https://amzn.to/324gQ7D?tag=tv-auto-20">c&#xE2;ble 4 broches</a> pour moteur Nema</li>
<li>x1 <a rel="nofollow" href="https://www.banggood.com/fr/search/power-supply-module-5v-12v/0-0-0-1-1-60-0-price-0-0_p-2.html?p=RA18043558422201601Y">mini module d&apos;alimentation</a> multi-tensions d&#xE9;livrant au moins 5V et 12V</li>
<li>x1 anneau de LED &#xF8;32mm (<a rel="nofollow" href="https://amzn.to/323tK67?tag=tv-auto-20">x16 LED RGB NeoPixel</a>)</li>
<li><a rel="nofollow" href="https://amzn.to/2TJ5txu?tag=tv-auto-20">Raspberry Pi</a> (mod&#xE8;le au choix). Le support est compatible avec les mod&#xE8;les 3 et 4</li>
</ul><h3>Composants recycl&#xE9;s d&apos;une <a rel="nofollow" href="https://amzn.to/3265osk?tag=tv-auto-20">CNC 3018</a> utilis&#xE9;s pour le statif :</h3>
<ul><li>x2 profil&#xE9;s aluminium 2020 (section carr&#xE9;e 20x20mm) de longueur 220mm environ</li>
<li>x2 profil&#xE9;s aluminium 2020 (section carr&#xE9;e 20x20mm) de longueur 350mm environ</li>
<li>x4 &#xE9;querres 30mm</li>
<li>Ecrous en T pour profil&#xE9; aluminium 2020</li>
<li>x2 tiges &#xF8;10mm de longueur 400mm mini</li>
<li>x2 guidages lin&#xE9;aires &#xF8;10mm</li>
<li>x4 supports pour tige &#xF8;10mm</li>
<li>x1 platine moteur Nema</li>
<li>x1 vis T8 de longueur 350mm minimum</li>
<li>x1 &#xE9;l&#xE9;ment de transmission direct &#xE0; vis</li>
<li>x1 raccord flexible &#xF8;8mm</li>
</ul><h3>Liens utiles</h3>
<ul><li><a rel="nofollow" href="https://projetsdiy.fr/microscope-motorise-camera-hq-raspberrypi-interface-html/">Tutoriel avec le code source Python</a></li>
<li><a rel="nofollow" href="https://github.com/projetsdiy/Raspberry-Pi-Projects/tree/main/HQ%20Camera/Motorized%20microscope">D&#xE9;p&#xF4;t Github</a></li>
<li><a rel="nofollow" href="https://projetsdiy.fr/raspberry-pi-piloter-un-moteur-pas-a-pas-nema-17-avec-la-librairie-rpimotorlib-python-pour-a4988/">Piloter un moteur Nema 17 en Python</a></li>
<li><a rel="nofollow" href="https://projetsdiy.fr/prix-camera-raspberrypi-5mp-8mp-noir-hq-12mp-monture-c/">Cam&#xE9;ras pour Raspberry Pi et accessoires (objectifs &#xE0; monture C, bague allonge, ruban CSI, tr&#xE9;pied, support microscope</a></li>
<li><a rel="nofollow" href="https://projetsdiy.fr/composants-imprimantes-3d-cnc-diy-profiles-ecrout-nema-17-a4899/">S&#xE9;lection de composants</a> pour imprimantes 3D et CNC que l&apos;on peut utiliser dans les bricolages.</li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA                    </a>

                    Black
</body></html>

Motorized microscope with Raspberry Pi HQ camera and HTML interface

## Motorized microscope project made from recycled elements from a CNC and the new HQ camera for Raspberry Pi.
The HTML command interface was developed in Python. It is accessible from the local network and allows you to zoom and control the NeoPixels LED lighting.

### Parts to 3D print
* Support for 12.3MP HQ camera to be fixed on the linear guide of a T8 screw
* Support for Neopixel 16 LED lighting (diam. 30mm) compatible with 4K C-mount lens
* Raspberry Pi support (3 or 4) to be fixed on a 2020 aluminum profile using a T-nut
* Extension tube (optional)

### HQ camera and other components used
* [12MP HQ Camera module](https://s.click.aliexpress.com/e/_ArT8CJ)
* [4K 50mm C-mount lens](https://s.click.aliexpress.com/e/_ACyuyb) or equivalent
* x1 Motor [Nema 17HS4401](https://amzn.to/37Z5YMi) or equivalent
* x1 stepper motor driver [A4988](https://amzn.to/2TLUrHL) or [DRV8825](https://amzn.to/3jKHZCI)
* x1 [4 pin cable](https://amzn.to/3mPEg8Z) for Nema motor
* x1 [mini power supply module](https://www.banggood.com/fr/search/power-supply-module-5v-12v/0-0-0-1-1-60-0-price-0-0_p-2.html?p=RA18043558422201601Y) multi-voltages delivering at least 5V and 12V
* x1 LED ring ø32mm ([x16 LED RGB NeoPixel](https://amzn.to/34Nm9KG))
* [Raspberry Pi](https://amzn.to/2TJ5txu)(model of your choice). The bracket is compatible with models 3 and 4

### Recycled components from a [CNC 3018](https://amzn.to/3oQmzrC) used for the stand:
* x2 aluminum profiles 2020 (square section 20x20mm) of length 220mm approximately
* x2 2020 aluminum profiles (square section 20x20mm) approximately 350mm long
* x4 30mm brackets
* T-nuts for aluminum profile 2020
* x2 rods ø10mm length 400mm mini
* x2 linear guides ø10mm
* x4 supports for rod ø10mm
* x1 Nema motor board
* x1 T8 screw of minimum length 350mm
* x1 direct screw transmission element
* x1 flexible connection ø8mm

### Useful links
* [Step by step tutorial](https://diyprojects.io/motorized-microscope-hq-camera-raspberry-pi-python-html-interface/)
* [Github Repo](https://github.com/projetsdiy/Raspberry-Pi-Projects/tree/main/HQ%20Camera/Motorized%20microscope)
* [Python code to drive Nema 17 stepper motor](https://diyprojects.io/drive-nema-17-stepper-motor-rpimotorlib-python-library-a4988/)
* [Cameras for Raspberry Pi and accessories (C-mount lenses, extension ring, CSI tape, tripod, microscope holder](https://diyprojects.io/price-csi-cameras-raspberry-pi-hq-cmount-camera-8mp-noir-5mp-ribon-lens-tripod-microscope/)
* [Selection of components](https://diyprojects.io/components-diy-3d-printer-profiles-tnut-nema-17-a4899/) for 3D printers and CNCs that can be used in DIY.

## Projet de microscope motorisé réalisé à partir d'éléments recyclés d'une CNC et de la nouvelle caméra HQ pour Raspberry Pi. 
L'interface de commande HTML a été développée en Python. Elle est accessible depuis le réseau local et permet de zoomer et de piloter l'éclairage à LED NeoPixels.

### Pièces à imprimer en 3D
* Support pour caméra HQ 12,3MP à fixer sur le guidage linéaire d'un vis T8
* Support pour éclairage Neopixel 16 LED (diam. 30mm) compatible objectif 4K à monture C
* Support Raspberry Pi (3 ou 4) à fixer sur un profilé aluminium 2020 à l'aide d'un écrou en T
* Tube allonge (optionnel)

### Caméra HQ et autre composants utilisés
* [Caméra HQ 12MP](https://s.click.aliexpress.com/e/_ArT8CJ)
* [Objectif 50mm à monture C par caméra 4K](https://s.click.aliexpress.com/e/_ACyuyb) ou équivalent
* x1 Moteur [Nema 17HS4401](https://amzn.to/383fWMw) ou équivalent
* x1 pilote pour moteur pas à pas [A4988](https://amzn.to/2Gk0BM9) ou [DRV8825](https://amzn.to/3jPm79k)
* x1 [câble 4 broches](https://amzn.to/324gQ7D) pour moteur Nema
* x1 [mini module d'alimentation](https://www.banggood.com/fr/search/power-supply-module-5v-12v/0-0-0-1-1-60-0-price-0-0_p-2.html?p=RA18043558422201601Y) multi-tensions délivrant au moins 5V et 12V
* x1 anneau de LED ø32mm ([x16 LED RGB NeoPixel](https://amzn.to/323tK67))
* [Raspberry Pi](https://amzn.to/2TJ5txu) (modèle au choix). Le support est compatible avec les modèles 3 et 4

### Composants recyclés d'une [CNC 3018](https://amzn.to/3265osk) utilisés pour le statif :
* x2 profilés aluminium 2020 (section carrée 20x20mm) de longueur 220mm environ
* x2 profilés aluminium 2020 (section carrée 20x20mm) de longueur 350mm environ
* x4 équerres 30mm
* Ecrous en T pour profilé aluminium 2020
* x2 tiges ø10mm de longueur 400mm mini
* x2 guidages linéaires ø10mm
* x4 supports pour tige ø10mm
* x1 platine moteur Nema
* x1 vis T8 de longueur 350mm minimum
* x1 élément de transmission direct à vis
* x1 raccord flexible ø8mm

### Liens utiles
* [Tutoriel avec le code source Python](https://projetsdiy.fr/microscope-motorise-camera-hq-raspberrypi-interface-html/)
* [Dépôt Github](https://github.com/projetsdiy/Raspberry-Pi-Projects/tree/main/HQ%20Camera/Motorized%20microscope)
* [Piloter un moteur Nema 17 en Python](https://projetsdiy.fr/raspberry-pi-piloter-un-moteur-pas-a-pas-nema-17-avec-la-librairie-rpimotorlib-python-pour-a4988/)
* [Caméras pour Raspberry Pi et accessoires (objectifs à monture C, bague allonge, ruban CSI, trépied, support microscope](https://projetsdiy.fr/prix-camera-raspberrypi-5mp-8mp-noir-hq-12mp-monture-c/)
* [Sélection de composants](https://projetsdiy.fr/composants-imprimantes-3d-cnc-diy-profiles-ecrout-nema-17-a4899/) pour imprimantes 3D et CNC que l'on peut utiliser dans les bricolages.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hi everyone,</p>
<p>i have made a remix of the daveposh concept for my Hercules HD Twist webcam mounted on a 16x16mm frame.</p>
<p>You can find the original parts by this link below:<br><a rel="nofollow" href="/thing:2368146">https://www.thingiverse.com/thing:2368146</a></p>
<p>Enjoy it !</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSUN+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        eSUN PLA+                    </a>

                    Yellow
</body></html>

Custom Ball and Socket Webcam Mount Hercules HD Twist

Hi everyone,

i have made a remix of the daveposh concept for my Hercules HD Twist webcam mounted on a 16x16mm frame.

You can find the original parts by this link below:
https://www.thingiverse.com/thing:2368146

Enjoy it !





<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A small tripod for use with phones or action cameras. Legs can be folded to use it as a grip. </p>
<p>This design is part of a series of GoPro Mounts/Mods/Cases I have designed. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PETG&amp;tag=tv-auto-20" target="_blank">
                        Generic PETG                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Designed to print on a single 200x200mm bed, generally without supports. Print with &gt;3 perimeters for strength. Consider enabling supports if your printer struggles with bridges and &gt;50 degree overhangs.</p>
<p>You will require 3xM3 15mm screws to attach the tripod legs. </p>
<p>Individual files also attached. </p>
<hr><hr><hr><p><a rel="nofollow" href="https://www.instagram.com/madebypriyam/">https://www.instagram.com/madebypriyam/</a></p></div>
</body></html>

Mini Tripod/Grip (GoPro Compatible)

A small tripod for use with phones or action cameras. Legs can be folded to use it as a grip. 

This design is part of a series of GoPro Mounts/Mods/Cases I have designed. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a stand for the xiaomi (xiaofang) to use in Artillery Genius. It has a hole to put a usb light. Super Simple.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Genius</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Giantarm+PLA&amp;tag=tv-auto-20" target="_blank">
                        Giantarm PLA                    </a>

                    Sparky Blue
</body></html>

Xiaomi (xiaofang) camera stand for Artillery Genius

Just my design of a stand for the xiaomi (xiaofang) to use in Artillery Genius. It has a hole to put a usb light. Super Simple.

Thingscanner

Some articles you might like