This 3D printed human-scale LEGO Space Blaster, created by Norwegian designer Stian Ervik Wahlvaag, is equipped with sounds and lights. Learn how to make your own and have a blast!

[Project] 3D Print a Human-Scale LEGO Space Blaster With Sounds & Lights | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>More ergonomic stock for your Lynx. QD Sling and Sling Bar versions, sling bar fits a 1&quot; sling and uses a 10-24 x 1-1/2&quot; screw. QD geometry stolen from the EnderSavesTheDay remix</p></div>
</body></html>

Orion Blasters Lynx Ergo Stock Edition - QD and Sling Bar

More ergonomic stock for your Lynx. QD Sling and Sling Bar versions, sling bar fits a 1" sling and uses a 10-24 x 1-1/2" screw. QD geometry stolen from the EnderSavesTheDay remix

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A new version of the nerf scope.<br>
3mm hole for the bolt to add to rail. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>at least 10%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA&amp;tag=tv-auto-20" target="_blank">
                        any PLA                    </a>

                    any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used what ever PLA I have to hand. </p>
<p>This is a work in progress and would love any feedback. </p></div>
</body></html>

Nerf Scope 5 

A new version of the nerf scope. 
3mm hole for the bolt to add to rail. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>My piston broke, that&apos;s why this model appeared. I did a test and everything works.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=BESTFILOMENT+PLA&amp;tag=tv-auto-20" target="_blank">
                        BESTFILOMENT PLA                    </a>

                    Black
</body></html>

Nerf Glowshot Piston

My piston broke, that's why this model appeared. I did a test and everything works.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Uses Slug&apos;s <a rel="nofollow" href="/captainslug">https://www.thingiverse.com/captainslug</a> locking system so all credit to him for that, the &quot;Grip&quot; part however is my brainchild. </p>
<p>Step file included if you would like to edit or remix anything, .STL and .OBJ are also included for printing.</p>
<p>Designed for a nerf blaster but should work on any picatinny rails.</p>
<p>Any comments or questions drop a comment or message me on here, or if you want a speedy response send me a DM over discord (CHUCKdaAllStar#7383)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Fusion+Filaments+PLA&amp;tag=tv-auto-20" target="_blank">
                        Fusion Filaments PLA                    </a>

                    Uranium Yellow
</body></html>

CHUCKLE DUSTER Picatinny Foregrip

Uses Slug's https://www.thingiverse.com/captainslug locking system so all credit to him for that, the "Grip" part however is my brainchild. 

Step file included if you would like to edit or remix anything, .STL and .OBJ are also included for printing.

Designed for a nerf blaster but should work on any picatinny rails.

Any comments or questions drop a comment or message me on here, or if you want a speedy response send me a DM over discord (CHUCKdaAllStar#7383)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a speedloader I have made to load my NERF Roughcut much faster. Being a shotgun, the Roughcut runs out of ammo way too fast and takes too long to load to be practical for many fast-paced games, so I made this to help quicken the reload process. It does not need support, but you may need to use some force to loosen up the slide to push darts through. Place the speedloader on the front of the Roughcut and push the slide forward to load darts into the blaster. The speedloader tends to work best with elite-style darts, as adventure force waffles and accufakes cause more friction.</p>
<p>Demonstration video here:<br><a rel="nofollow" href="https://youtu.be/73q5hkKlhkQ">https://youtu.be/73q5hkKlhkQ</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Dremel Digilab</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>3D45</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>any</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>any</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA&amp;tag=tv-auto-20" target="_blank">
                        any PLA                    </a>

                    any
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>There will probably be some stringing inside of the dart holds, so just knock it out with some sandpaper. It my also take some force to loosen the slide.</p></div>
</body></html>

NERF Roughcut Speedloader

This is a speedloader I have made to load my NERF Roughcut much faster. Being a shotgun, the Roughcut runs out of ammo way too fast and takes too long to load to be practical for many fast-paced games, so I made this to help quicken the reload process. It does not need support, but you may need to use some force to loosen up the slide to push darts through. Place the speedloader on the front of the Roughcut and push the slide forward to load darts into the blaster. The speedloader tends to work best with elite-style darts, as adventure force waffles and accufakes cause more friction.

Demonstration video here:
https://youtu.be/73q5hkKlhkQ

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a pump-action collapsible stock carbine kit for the Adventure Force Aeon Pro. The pump grip part of the kit requires no internal modification to the blaster at all- just needs the slide removed to fit, and then two 1/8 inch thick aluminum bars cut to length and drilled appropriately to serve as prime bars. The collapsible stock part of the kit will require the blaster to actually be opened, but only needs two holes drilled in the rear to attach the mechanism. Otherwise, there is no actual internal modification necessary.</p>
<p>You will need:</p>
<p>A variety of 6-32 screws, ranging from 1/2&quot; to 1&quot;, as well as hex nuts to match. I just went to Ace and bought a bagful. For the pump grip, four 3/4&quot; with hex nuts, for the pump slide two 3/4&quot; and two 1/2&quot; (3/8&quot; also works, may be necessary depending on your aluminum bars; washers might be a good idea too) and for the pump rails four 3/4&quot;. For the stock mechanism, you&apos;ll need six 1/2&quot;  and two hex nuts.</p>
<p>Two to three springs for the stock mech- I used sections of one longer spring from Ace. Stiff pen springs will work fine.</p>
<p>1/8 inch by 1/2 inch aluminum bar for the prime bars</p>
<p>1/4 inch aluminum rod for the stock rods</p>
<p>Hacksaw, files, drill, screwdriver, and superglue (or whatever you prefer for adhesive)</p>
<p>To assemble: It&apos;s all pretty self explanatory, honestly. The stock guide piece will need to be printed twice, and just glues onto the side of the blaster to keep the rods straight. The endcap piece is optional, all it does is stop the rods from sliding all the way through. Be aware that removing the stock completely will be required to open the blaster, so I just attach my endcaps with a very light dab of glue so that they can be knocked off with relatively little effort. The stock catch notches are just filed into the rods with a triangular file- make sure to put them at the same place in both rods! The muzzle brake just fits in like the stock muzzle, may require a single layer of E-tape to fit tightly. The rear picatinny just glues on.</p>
<p>Supports needed only on the pumpslide parts- they will need to be printed diagonally standing so as not to crack.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2-0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Yousu+PLA&amp;tag=tv-auto-20" target="_blank">
                        Yousu PLA                    </a>

                    Pink
</body></html>

Aeon Pro Carbine Kit

This is a pump-action collapsible stock carbine kit for the Adventure Force Aeon Pro. The pump grip part of the kit requires no internal modification to the blaster at all- just needs the slide removed to fit, and then two 1/8 inch thick aluminum bars cut to length and drilled appropriately to serve as prime bars. The collapsible stock part of the kit will require the blaster to actually be opened, but only needs two holes drilled in the rear to attach the mechanism. Otherwise, there is no actual internal modification necessary.

You will need:

A variety of 6-32 screws, ranging from 1/2" to 1", as well as hex nuts to match. I just went to Ace and bought a bagful. For the pump grip, four 3/4" with hex nuts, for the pump slide two 3/4" and two 1/2" (3/8" also works, may be necessary depending on your aluminum bars; washers might be a good idea too) and for the pump rails four 3/4". For the stock mechanism, you'll need six 1/2"  and two hex nuts.

Two to three springs for the stock mech- I used sections of one longer spring from Ace. Stiff pen springs will work fine.

1/8 inch by 1/2 inch aluminum bar for the prime bars

1/4 inch aluminum rod for the stock rods

Hacksaw, files, drill, screwdriver, and superglue (or whatever you prefer for adhesive)

To assemble: It's all pretty self explanatory, honestly. The stock guide piece will need to be printed twice, and just glues onto the side of the blaster to keep the rods straight. The endcap piece is optional, all it does is stop the rods from sliding all the way through. Be aware that removing the stock completely will be required to open the blaster, so I just attach my endcaps with a very light dab of glue so that they can be knocked off with relatively little effort. The stock catch notches are just filed into the rods with a triangular file- make sure to put them at the same place in both rods! The muzzle brake just fits in like the stock muzzle, may require a single layer of E-tape to fit tightly. The rear picatinny just glues on.

Supports needed only on the pumpslide parts- they will need to be printed diagonally standing so as not to crack.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a fix for the badly designed Hawkex HK receiver MkII using a Gieselle handguard.</p>
<p><a rel="nofollow" href="https://www.hawkextactical.com.au/products/ht416-metal-receiver-for-v2-series-toy-gel-ball-blasters">https://www.hawkextactical.com.au/products/ht416-metal-receiver-for-v2-series-toy-gel-ball-blasters</a></p>
<p><a rel="nofollow" href="https://www.hawkextactical.com.au/collections/handguards/products/smr-hk-416-handguard-m-lok">https://www.hawkextactical.com.au/collections/handguards/products/smr-hk-416-handguard-m-lok</a></p>
<p>Sadly, the receiver doesnt have the alignment tab in the top rail to stop the free floating handguards designed to suit the HK platform.I believe it was designed to work ONLY with their proprietory handguard.</p>
<p>So sadly, the only workaround Ive found is to use this wedge, bolted into the gas tube (M6 I think?) mounting point on the front of the receiver to stop the handguard from spinning freely. You also have to grind off the alignment tab from the handguard.</p>
<p>Its intentionally tapered to provide a good tight fit. While the rails still dont meet up (no idea why Hawkex did this), at least its now solid and usable.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.1</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Whatever+PLA&amp;tag=tv-auto-20" target="_blank">
                        Whatever PLA                    </a>

                    Whatever
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>No supports needed. Best to do it 100% solid for strength, only takes 20mins to print.</p></div>
</body></html>

Hawkex HK Receiver + Giessele handguard fix

This is a fix for the badly designed Hawkex HK receiver MkII using a Gieselle handguard.

https://www.hawkextactical.com.au/products/ht416-metal-receiver-for-v2-series-toy-gel-ball-blasters

https://www.hawkextactical.com.au/collections/handguards/products/smr-hk-416-handguard-m-lok

Sadly, the receiver doesnt have the alignment tab in the top rail to stop the free floating handguards designed to suit the HK platform.I believe it was designed to work ONLY with their proprietory handguard.

So sadly, the only workaround Ive found is to use this wedge, bolted into the gas tube (M6 I think?) mounting point on the front of the receiver to stop the handguard from spinning freely. You also have to grind off the alignment tab from the handguard.

Its intentionally tapered to provide a good tight fit. While the rails still dont meet up (no idea why Hawkex did this), at least its now solid and usable.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A barrel to print as one. </p>
<ul><li>You ust need some small screws to attach it </li>
<li>
<p>No assembling needed</p>
</li>
<li>i printed it with a ender 3 pro </li>
</ul></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PLA&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PLA                    </a>

                    Black
</body></html>

Barrel for Nerf Hammershot

A barrel to print as one. 
- You ust need some small screws to attach it 
- No assembling needed

- i printed it with a ender 3 pro 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Simple V2 Gearbox reinforcement for airsoft M4 AEGs. Uses 2 m3x12 cylinder head screws.</p>
<p>Please share your make and feedback.</p></div>
</body></html>

Gearbox V2 Reinforcement (Airsoft)

Simple V2 Gearbox reinforcement for airsoft M4 AEGs. Uses 2 m3x12 cylinder head screws.

Please share your make and feedback.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>&quot;The Valtz gun has gone though many interations, until it reached its current form in 045.2nd. Loaded with an ingenious mechanism, allowing a tube of metal, with prepacked gunpowder and bullets to be slot inserted, and fired rapidly with the cranking of its handle&quot;</p>
<p>This a miniature gatling gun, intended for 28-32mm scale miniatures.</p>
<p>The size of a standard 28mm miniature is shown in the last picture, right behind the full weapon</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Needed for assembly:</p>
<p>2 Wheels<br>
1 Body<br>
1 Barrel</p>
<p>Barrel is best printed pointing upwards</p></div>
</body></html>

Valtz Gun 2

"The Valtz gun has gone though many interations, until it reached its current form in 045.2nd. Loaded with an ingenious mechanism, allowing a tube of metal, with prepacked gunpowder and bullets to be slot inserted, and fired rapidly with the cranking of its handle"

This a miniature gatling gun, intended for 28-32mm scale miniatures.
 
The size of a standard 28mm miniature is shown in the last picture, right behind the full weapon

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Picatinny rail attachment for Tactical Torch of 25mm Diameter<br>
Designed to be ultra compact and designed for a torch of 25mm diameter<br>
Intended for use with Airsoft/Gelsoft toys only</p>
<p>Construction requires:</p>
<ul><li>1 x 35mm M3 screw</li>
<li>1 x 15mm M3 screw</li>
<li>2 x M3 Nuts</li>
</ul><p>If you like this design, tip me a coffee and I&apos;ll upload more :D<br><a rel="nofollow" href="https://paypal.me/jupiter296">https://paypal.me/jupiter296</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Flashforge+PLA&amp;tag=tv-auto-20" target="_blank">
                        Flashforge PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>50mm/s+<br>
5 Wall Layers<br>
0.12 layer height<br>
over 9000 everything else.</p></div>
</body></html>

Picatinny rail Tactical Torch Attachment

Picatinny rail attachment for Tactical Torch of 25mm Diameter
Designed to be ultra compact and designed for a torch of 25mm diameter
Intended for use with Airsoft/Gelsoft toys only

Construction requires:
 - 1 x 35mm M3 screw
 - 1 x 15mm M3 screw
 - 2 x M3 Nuts

If you like this design, tip me a coffee and I'll upload more :D
https://paypal.me/jupiter296

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a barrel extension for a 400mm length barrel used in Gelsoft/Airsoft Toys.</p>
<p>I required the extra length for my attachments after switching out from a 335mm to the 400mm barrel.<br>
Features the standard 14mm Counter-Clockwise Thread on both ends.<br>
Align correctly and thread on slowly.<br>
Over tightening WILL split the threaded portion from the barrel. Better to have a small gap than a de-laminated print </p>
<p>For your safety: Intended for use ONLY with Gelsoft/Airsoft applications</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.12</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Flashforge+PLA&amp;tag=tv-auto-20" target="_blank">
                        Flashforge PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>For best detail, print at 0.08, 0.12 or 0.16 to ensure you get the BEST detail on the thread<br>
Printed at 100% for strongest walls<br>
Supports not necessary, but may help the internal thread to barrel portion from becoming messy</p></div>
</body></html>

CCW Extension for 40cm Barrel

This is a barrel extension for a 400mm length barrel used in Gelsoft/Airsoft Toys.

I required the extra length for my attachments after switching out from a 335mm to the 400mm barrel.
Features the standard 14mm Counter-Clockwise Thread on both ends.
Align correctly and thread on slowly.
Over tightening WILL split the threaded portion from the barrel. Better to have a small gap than a de-laminated print 

For your safety: Intended for use ONLY with Gelsoft/Airsoft applications

Thingscanner

Some articles you might like

[Project] 3D Print a Human-Scale LEGO Space Blaster With Sounds & Lights | All3DP

Show Only

Looking for tag: blaster