SmarterMount Bike Mount for Pebble: Use your Pebble as navigator and communicator while cycling on your bike.

3D Printed SmarterMount Bike Mount for Pebble | All3DP

A folding performance bike? Preposterous! And yet Montague Bikes have created a no-compromise folding bike with 3D printing technology.

Company Makes Folding Performance Bike with 3D Printing | All3DP

Bike falling to pieces? Sick of finding expensive replacements? Check out Trayser, a futuristic e-bike with 3D printable spare parts.

Futuristic Trayser Bike has 3D Printable Spare Parts | All3DP

The Sculpteo Bike Project is a road bike made with additive manufacturing, and its designers are currently riding it across the USA.

Sculpteo Bike Project on 1000km Road Trip From Las Vegas | All3DP

The 3D printing revolution has come for your bike. Discover the best 3D printed bike parts and accessories to enhance your riding experience!

16 Best 3D Printed Bike Parts & Accessories | All3DP

The bike carrying handle is the best solution for those locations where it’s inappropriate (or just downright impossible) to go while on your bike.

3D Printed Bike Carrying Handle | All3DP

Do you ride your bike around a city without protection or lighting? Will Haude from 3D Brooklyn has created a 3D printed bike blinker for you.

3D Printed Bike Blinker Makes Your Ride A Lot Safer | All3DP

Australian bike brand Bastion Cycles will be debuting its state-of-the-art road race bike, which combines 3D printed titanium lugs with carbon fibre tubes.

Bastion Launch 3D Printed Road Bike | All3DP

This week, Adafruit shows us how to make a sci-fi-inspired bike headlight, inspired by jet engines and rocket boosters. Cycle through various colors and animations with the RGB LED button.

[Project] NeoPixel Bike Light | All3DP

Bike lighting systems manufacturer Supernova have upgraded their production & design process with the fifth generation Makerbot Replicator.

Supernova Design & Production Boosted by Makerbot | All3DP

The 3D printed Pebble Watch Bike Mount comes in handy for gripping your Pebble Watch as you enjoy your rides.

3D Printed Pebble Watch Bike Mount | All3DP

Another great tool: Just print this doodad, mount it to your bike with zip ties, attach your iPhone, and you’re ready to receive phone calls while riding.

3D Printed iPhone 4 Bike Mount | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Cone for cycling training</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.24</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Creality+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Creality TPU                     </a>

                    Orange, White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used ST-PLA,<br>
Print Speed of 50mm/s. </p></div>
</body></html>

Cone - bike - kids

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Fusion360 Tool-Bike-casete&amp;bottom brackets . Super Simple.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=CREALITY+ST-PLA&amp;tag=tv-auto-20" target="_blank">
                        CREALITY ST-PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used ST-PLA, but ABS is a better choice due to the hardness of the material.<br>
Print Speed of 45mm/s. </p></div>
</body></html>

Tool-Bike-casete&bottom brackets

Just my design of a Fusion360 Tool-Bike-casete&bottom brackets . Super Simple.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Jen m&#x16F;j n&#xE1;vrh Fusion 360 pro nosi&#x10D; kol Atera sport Hitch.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Gembird3+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Gembird3 TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used PLA with tree support.<br>
Metal axle with a diameter of 4mm<br>
Print speed 40 mm / s.</p></div>
</body></html>

Atrera-sport-Bike-car-holder

Jen můj návrh Fusion 360 pro nosič kol Atera sport Hitch.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a dummy pulley to put on a bicycle 12mm thru rear axle.<br>
Great for washing your chain and rear derailleur.<br>
Can shift gears, it will slide over the bike axle. </p>
<p>Let me know if you want any mod to it in the comments. </p>
<p>Remix of:<br><a rel="nofollow" href="/thing:2863096">https://www.thingiverse.com/thing:2863096</a><br>
(thingiverse never found the original)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=BuMat+PLA&amp;tag=tv-auto-20" target="_blank">
                        BuMat PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Easy and fast to print</p>
<p>Supports: YES</p></div>
</body></html>

Dummy thru axle hub

This is a dummy pulley to put on a bicycle 12mm thru rear axle. 
Great for washing your chain and rear derailleur. 
Can shift gears, it will slide over the bike axle. 

Let me know if you want any mod to it in the comments. 

Remix of:
https://www.thingiverse.com/thing:2863096
(thingiverse never found the original)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>To carry your 2l-1l, 63-40oz bottles (kleen kanteen, nalgene and so on) or to hold a waterproof bag or to carry some spare tubes or your favorite wine bottle or 12 sausages wherever you got cage bolts.</p>
<p>Use it with voile straps or velcro straps, maximum 25mm wide.</p>
<p>Enjoy the ride, more bikepacking designs to come.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Raise3D</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Pro2</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=whatever+whatever&amp;tag=tv-auto-20" target="_blank">
                        whatever whatever                    </a>

                    whatever
</body></html>

Bikepacking monster cage

To carry your 2l-1l, 63-40oz bottles (kleen kanteen, nalgene and so on) or to hold a waterproof bag or to carry some spare tubes or your favorite wine bottle or 12 sausages wherever you got cage bolts.

Use it with voile straps or velcro straps, maximum 25mm wide.

Enjoy the ride, more bikepacking designs to come.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Spring loaded barend plug for road bikes for easy access storage.</p>
<p>Inspired by barend storage for bike tools and tubeless tire pluggers, I wanted something that was easy to remove, but not friction fit. This uses a road bike&apos;s own handlebar tape to hold a sleeve around the bar end with unbent paperclips. The springs for the latch are cut down and rebent safety pins.</p>
<p>Also needed are two short M3 bolts and an M5 to hold whatever tool you want to attach to the removeable part of the bar end.</p>
<p>Very Important: wear eye protection when fitting the springs. They can easily fly off.</p>
<p>This is designed for small paper clips, about 0.85mm wire diameter. I splay them out after poking them through the sleeve so that it is harder to pull out.</p>
<p>Since most paperclips are not made of stainless steel, they will probably rust, especially if you have caustic sweat. Likewise with the safety pin springs.</p>
<p>This is a work in progress because, honestly, I haven&apos;t figured what to attach to the barend plug, so I haven&apos;t even installed it on a bike to find out where it needs improvement. The next iteration will probably have hidden springs if I can fit them between the two plug halves.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Doesn&apos;t matter</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=n%2Fa+ABS&amp;tag=tv-auto-20" target="_blank">
                        n/a ABS                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The buildplate layout is pictured. Only the latch (make two) needs to be rotated 90 degrees on its side and have supports added. Supports only on the buildplate only is fine. It will probably need to be filed down so it is a smooth sliding fit between the plug halves.</p></div>
</body></html>

Barend storage

Spring loaded barend plug for road bikes for easy access storage.

Inspired by barend storage for bike tools and tubeless tire pluggers, I wanted something that was easy to remove, but not friction fit. This uses a road bike's own handlebar tape to hold a sleeve around the bar end with unbent paperclips. The springs for the latch are cut down and rebent safety pins.

Also needed are two short M3 bolts and an M5 to hold whatever tool you want to attach to the removeable part of the bar end.

Very Important: wear eye protection when fitting the springs. They can easily fly off.

This is designed for small paper clips, about 0.85mm wire diameter. I splay them out after poking them through the sleeve so that it is harder to pull out.

Since most paperclips are not made of stainless steel, they will probably rust, especially if you have caustic sweat. Likewise with the safety pin springs.

This is a work in progress because, honestly, I haven't figured what to attach to the barend plug, so I haven't even installed it on a bike to find out where it needs improvement. The next iteration will probably have hidden springs if I can fit them between the two plug halves.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>These are spring-loaded clips for a bike bag, similar to ortlieb&apos;s style, for DIY bicycle panniers. I made it parametric and uploaded hooks (&quot;hook&quot; &quot;latch&quot;) and bottom clips (&quot;leaf&quot;) for different diameter rack tubing. The diameter in file name is finished printed size- so round up when you choose which size to print. This design works really well, but it is also complex. You need:</p>
<p>-m3 x 35mm SHCS for pivot<br>
-m3 tap (optional)<br>
-m5 x ??? for mounting holes. Bottom hole is countersunk for flat-head m5 screw.<br>
-m5 tap if you want to use top mounting holes<br>
-wire for spring. I used .6mm/.022&#x201D; dia spring steel which is the right amount of spring tension. Wrapped (3) turns around a 4.5mm shaft to produce the spring. Leave the spring tails 4cm long or so, so you can assemble it. Once the ends are trimmed, it is VERY difficult to reassemble. There is room for variation in spring, use what you can find.<br>
-paracord. The ends are threaded through the hook, and melted till the tip balls up. This secures the paracord in the counterbores on the inside of the hook.</p>
<p>The hooks and latches are printed on their sides. The m3 counterbore faces up on the hooks. The spring boss faces up on the latches. The leaf is printed with wide surface to the bed. Support material is only needed on the inside of the hook where the latch slides in. Added support blocker inside the tiny hole on Hook for spring.</p>
<p>For all this work, you get a really nice set of pannier clips for your DIY panniers. PLA is plenty strong. Design seems somewhat forgiving to different print settings/nozzle sizes. The latches have a travel limiter so you can actually carry heavy bags by the paracord release pull.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        PLA PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>support only needed inside the hooks. Good to block support inside the tiny spring hole in the  hook. file names are finished hook size, so round up. </p></div>
</body></html>

Locking Pannier Hook

These are spring-loaded clips for a bike bag, similar to ortlieb's style, for DIY bicycle panniers. I made it parametric and uploaded hooks ("hook" "latch") and bottom clips ("leaf") for different diameter rack tubing. The diameter in file name is finished printed size- so round up when you choose which size to print. This design works really well, but it is also complex. You need:

-m3 x 35mm SHCS for pivot
-m3 tap (optional)
-m5 x ??? for mounting holes. Bottom hole is countersunk for flat-head m5 screw.
-m5 tap if you want to use top mounting holes
-wire for spring. I used .6mm/.022” dia spring steel which is the right amount of spring tension. Wrapped (3) turns around a 4.5mm shaft to produce the spring. Leave the spring tails 4cm long or so, so you can assemble it. Once the ends are trimmed, it is VERY difficult to reassemble. There is room for variation in spring, use what you can find.
-paracord. The ends are threaded through the hook, and melted till the tip balls up. This secures the paracord in the counterbores on the inside of the hook.

The hooks and latches are printed on their sides. The m3 counterbore faces up on the hooks. The spring boss faces up on the latches. The leaf is printed with wide surface to the bed. Support material is only needed on the inside of the hook where the latch slides in. Added support blocker inside the tiny hole on Hook for spring.

For all this work, you get a really nice set of pannier clips for your DIY panniers. PLA is plenty strong. Design seems somewhat forgiving to different print settings/nozzle sizes. The latches have a travel limiter so you can actually carry heavy bags by the paracord release pull.


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>a replica of the moving bike in robloxity </p></div>
</body></html>

ROBLOX MYTH obama bike

a replica of the moving bike in robloxity 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Fork saver for motocross and enduro bikes</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Fork Saver</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.4</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=0+PLA&amp;tag=tv-auto-20" target="_blank">
                        0 PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Nozzle 1.2mm</p></div>
</body></html>

MX Fork Saver

Fork saver for motocross and enduro bikes

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hello,</p>
<p>because the Front Rack by Rad Power Bikes for the Radrunner-Model (and other Models, too) is sold out all the time in Europe, I had to create one on my own for my camping trips. :-)</p>
<p>It`s very stable and large enough to carry a small tent and a sleeping bag for example, for sure even more.</p>
<p>20cm x 20cm x 16cm</p>
<p>Please let me know in the comments, how it works out for you and what could be improved for a next version. :-)</p>
<p>Greetings from Germany<br>
Chris Fenner</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Geeetech+PLA&amp;tag=tv-auto-20" target="_blank">
                        Geeetech PLA                    </a>

                    Black
</body></html>

Rad Power Bikes FRONT RACK for Radrunner (20x20x16cm)

Hello,

because the Front Rack by Rad Power Bikes for the Radrunner-Model (and other Models, too) is sold out all the time in Europe, I had to create one on my own for my camping trips. :-)

It`s very stable and large enough to carry a small tent and a sleeping bag for example, for sure even more.

20cm x 20cm x 16cm

Please let me know in the comments, how it works out for you and what could be improved for a next version. :-)

Greetings from Germany
Chris Fenner

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I tried printing the source model by @Mattwall, but I found that layered 3D printing does not lend itself well to being clamped by metal bolts.  So I rebuilt the model from scratch, mostly following Matt&apos;s design dimensions, but with added internal channels for inserting metal reinforcement strips.</p>
<p>The design is updated to use M4 bolts and nuts.  For the bolts, I used M4 Hex Button Head Cap Bolts (304 SS). For the nuts, I used M4 x 0.7mm Nylon Lock Hex Nuts (also 304 SS).  I&apos;ve added a dimension photo for helping you figure out what length you need for your application, as your bolt length may vary depending on how thick you make your metal reinforcement strips.  The handlebar hole diameter in the model is 27.2mm, designed to fit a 25.4mm (1 inch) handlebar with a small margin for handlebar tape or rubber wrap for padding. The internal reinforcement channels are 7mm wide by 3mm high.</p>
<p>I have &quot;bridged&quot; the bolt shaft holes just above the hex nut recesses to support FFF printing without supports inside the nut recesses. I used a drill to quickly open the holes after the bracket was printed.</p>
<p>Finally, there is a second set of STL files labeled &quot;with-supports&quot; which is how I printed them. I liked the surface finish better with my own custom supports (which I cut off with a knife afterwards) better than the default supports that Simplify3D creates.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>FlashForge</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2F3xKW3?tag=tv-auto-20" target="_blank">Creator Pro</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>75%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=n%2Fa+ABS&amp;tag=tv-auto-20" target="_blank">
                        n/a ABS                    </a>

                    Black
</body></html>

Lezyne GPS Bike Mount with Reinforcement Channels

I tried printing the source model by @Mattwall, but I found that layered 3D printing does not lend itself well to being clamped by metal bolts.  So I rebuilt the model from scratch, mostly following Matt's design dimensions, but with added internal channels for inserting metal reinforcement strips.

The design is updated to use M4 bolts and nuts.  For the bolts, I used M4 Hex Button Head Cap Bolts (304 SS). For the nuts, I used M4 x 0.7mm Nylon Lock Hex Nuts (also 304 SS).  I've added a dimension photo for helping you figure out what length you need for your application, as your bolt length may vary depending on how thick you make your metal reinforcement strips.  The handlebar hole diameter in the model is 27.2mm, designed to fit a 25.4mm (1 inch) handlebar with a small margin for handlebar tape or rubber wrap for padding. The internal reinforcement channels are 7mm wide by 3mm high.

I have "bridged" the bolt shaft holes just above the hex nut recesses to support FFF printing without supports inside the nut recesses. I used a drill to quickly open the holes after the bracket was printed.

Finally, there is a second set of STL files labeled "with-supports" which is how I printed them. I liked the surface finish better with my own custom supports (which I cut off with a knife afterwards) better than the default supports that Simplify3D creates.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a driver tool for the classic 5-point or Pentagonal anti-theft bicycle quick release skewers. The reverse of the tool is a standard 8mm Hex that can be used with a standard wrench, or socket wrench. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Filaments.CA+PLA&amp;tag=tv-auto-20" target="_blank">
                        Filaments.CA PLA                    </a>

                    White
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Since its a small print, I used a large layer height of .2mm, 100% infill. If your bed level is off, it may help to print with a brim/raft. Printed for me in about 7 minutes. </p></div>
</body></html>

Pentagonal Anti Theft Key 

This is a driver tool for the classic 5-point or Pentagonal anti-theft bicycle quick release skewers. The reverse of the tool is a standard 8mm Hex that can be used with a standard wrench, or socket wrench. 

Thingscanner

Some articles you might like