Name: Pouch (sample)
Brand: blendedminiatures
Availability: InStock

Nike combined 3D printing and the traditional craft of bag-making in its “Rebento” duffle bag.

World’s first 3D-printed Football Bag | All3DP

The 3D printed Voronoi Bag is a stylish and attractive way to carry your personal items.

3D Printed Voronoi Bag | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.</p>
<p>We really like <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>, but we needed something slightly different. Rather than modify guppyk&apos;s model, we chose to create a similar design in OpenSCAD that is fully customizable.</p>
<h3>OpenSCAD Customizer Options</h3>
<p>You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.</p>
<h3>Single Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code> - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Stem</h4>
<ul><li><code>Stem_Material_Thickness</code> - Thickness of stem (X and Y axis)</li>
<li><code>Stem_Height</code> - Height of stem (Z axis)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Grip_Width</code> - Width of grip (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Square_Handle</code> - Should the handle be square?</li>
</ul><h4>Base</h4>
<ul><li><code>Base_Enabled</code> - Should a base be added?</li>
<li><code>Base_Lip_Width</code> - Width of base lip (X and Y axis)</li>
<li><code>Base_Lip_Height</code> - Height of base lip (Z axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Dual Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Distance</code> - Distance between the screws</li>
<li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code>  - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Material_Thickness</code> - Thickness of handle (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Handle_End_Length</code> - Handle end length (in addition to Handle_Material_Thickness)</li>
</ul><h4>Hand Hole</h4>
<ul><li><code>Hand_Hole_Width</code> - Width of hand hole (X axis)</li>
<li><code>Hand_Hole_Depth</code> - Depth of hand hole (Y axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Versions</h3>
<h3>Single Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Dual Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Printing</h3>
<p>Recommended slicer settings:</p>
<ul><li>Resolution: 0.1mm - 0.2mm</li>
<li>Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)</li>
<li>Supports: Doesn&apos;t Matter</li>
<li>Rafts: Doesn&apos;t Matter</li>
</ul><p>For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called <code>Z Seam Alignment</code>.</p>
<p>For small single point handles, you may need a print with a brim.</p>
<h3>Attribution</h3>
<p>This work, <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> was inspired by <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>.</p>
<p>Whilst some of the models included in the project may appear similar to the models from guppyk&apos;s project, the code and files in this project do not include any of the code or files from guppyk&apos;s project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).</p>
<p>Although we do not believe this project can strictly be considered a derivative (or &apos;remix&apos; in Thingiverse parlance) of guppyk&apos;s project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a &apos;remix&apos; of guppyk&apos;s project on Thingiverse to show our appreciation.</p>
<p><a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a> by <a rel="nofollow" href="/guppyk/">guppyk</a> is licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="/guppyk/">guppyk</a>.</p>
<h3>License</h3>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> models (.stl) are licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> code (.scad &amp; .json) is licensed under <a rel="nofollow" href="https://opensource.org/licenses/MIT">The MIT License</a> by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p></div>
</body></html>

Fully Customizable General Purpose Handles

Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.

We really like [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895), but we needed something slightly different. Rather than modify guppyk's model, we chose to create a similar design in OpenSCAD that is fully customizable.

OpenSCAD Customizer Options
---------------------------

You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.

### Single Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle` - Screw countersink angle (82 and 90 are common)

#### Stem

* `Stem_Material_Thickness` - Thickness of stem (X and Y axis)
* `Stem_Height` - Height of stem (Z axis)

#### Handle

* `Handle_Grip_Width` - Width of grip (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Square_Handle` - Should the handle be square?

#### Base

* `Base_Enabled` - Should a base be added?
* `Base_Lip_Width` - Width of base lip (X and Y axis)
* `Base_Lip_Height` - Height of base lip (Z axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

### Dual Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Distance` - Distance between the screws
* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle`  - Screw countersink angle (82 and 90 are common)

#### Handle

* `Handle_Material_Thickness` - Thickness of handle (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Handle_End_Length` - Handle end length (in addition to Handle_Material_Thickness)

#### Hand Hole

* `Hand_Hole_Width` - Width of hand hole (X axis)
* `Hand_Hole_Depth` - Depth of hand hole (Y axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

Versions
--------

### Single Point Variant

* 1.0 (4 Nov 2020) - Initial version

### Dual Point Variant

* 1.0 (4 Nov 2020) - Initial version


Printing
--------

Recommended slicer settings:

* Resolution: 0.1mm - 0.2mm
* Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)
* Supports: Doesn't Matter
* Rafts: Doesn't Matter

For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called `Z Seam Alignment`.

For small single point handles, you may need a print with a brim.

Attribution
-----------

This work, [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) was inspired by [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895).

Whilst some of the models included in the project may appear similar to the models from guppyk's project, the code and files in this project do not include any of the code or files from guppyk's project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).

Although we do not believe this project can strictly be considered a derivative (or 'remix' in Thingiverse parlance) of guppyk's project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a 'remix' of guppyk's project on Thingiverse to show our appreciation.

[Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895) by [guppyk](https://www.thingiverse.com/guppyk/) is licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [guppyk](https://www.thingiverse.com/guppyk/).

License
-------

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) models (.stl) are licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [Code and Make](https://codeandmake.com).

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) code (.scad & .json) is licensed under [The MIT License](https://opensource.org/licenses/MIT) by [Code and Make](https://codeandmake.com).

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Being OCD, didn&apos;t want to trash the inside of the Ryobi cordless vac with dirt/dust and wanted to make cleaning easy so created it to use Arm &amp; Hammer 67978GQ Hoover Type Y&amp;Z Premium Allergen Vacuum Bag, White from Amazon. </p>
<p>It&apos;s not the cleanest design as I used Tinkercad and used simple shapes for the design. Nothing fancy. Hopefully someone here can redesign it. </p>
<p>Uploaded both stl and obj files. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>XYZprinting</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>da Vinci Jr. 1.0 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Overture+PLA&amp;tag=tv-auto-20" target="_blank">
                        Overture PLA                    </a>

                    
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>The tube piece used supports but the piece that goes to the bag does not need support. </p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/99/fa/56/a3/9b/IMG_4060.JPG"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/17/fb/a6/71/c5/IMG_4061.JPG"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/c8/38/f5/b6/34/IMG_4063.JPG"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/35/84/6c/39/a6/IMG_4062.JPG"></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/8e/51/3f/f4/67/IMG_4064.JPG"></p>
</body></html>

Ryobi ONE+ 3 Gallon Vac - Vacuum Bag Attachment

Being OCD, didn't want to trash the inside of the Ryobi cordless vac with dirt/dust and wanted to make cleaning easy so created it to use Arm & Hammer 67978GQ Hoover Type Y&Z Premium Allergen Vacuum Bag, White from Amazon. 

It's not the cleanest design as I used Tinkercad and used simple shapes for the design. Nothing fancy. Hopefully someone here can redesign it. 

Uploaded both stl and obj files. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p><strong><em> SPOILER ALERT </em></strong></p>
<p>This is Baby Yoda&apos;s bag greeblie as seen in Season 2 episode 9 : The Marshal</p>
<p>Taken from screen grabs when The Mandalorian and The Marshal are riding their speeders through the canyons in S2 E1 Chapter 9.</p>
<p>I&apos;ve tried to make this about the right size to go on a &apos;Canvas Bag Vintage Army Military Style Haversack Webbing Work Tool Shoulder Sack&apos; which you can find on eBay.</p>
<p>I separated the parts so they can be painted easily.</p>
<p>The bolts will need printing x4 and as strong as you can. These are for holding the Greeblie to your bag from inside.</p>
<p>Also print x4 Bolt Covers.</p>
<p>Enjoy!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Technologyoutlet+PLA%2B+&amp;tag=tv-auto-20" target="_blank">
                        Technologyoutlet PLA+                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Technologyoutlet PLA+ </p></div>
</body></html>

The Mandalorian S2 E1 Chapter 9 - Baby Yoda Bag Greeblie

*** SPOILER ALERT ***









This is Baby Yoda's bag greeblie as seen in Season 2 episode 9 : The Marshal

Taken from screen grabs when The Mandalorian and The Marshal are riding their speeders through the canyons in S2 E1 Chapter 9.

I've tried to make this about the right size to go on a 'Canvas Bag Vintage Army Military Style Haversack Webbing Work Tool Shoulder Sack' which you can find on eBay.


I separated the parts so they can be painted easily.

The bolts will need printing x4 and as strong as you can. These are for holding the Greeblie to your bag from inside.

Also print x4 Bolt Covers.


Enjoy!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The original clip is a great idea, and the hinge mechanism is brilliantly designed.<br>
After printing it, and using it, it has some fundamental design flaws... it does work the way it is supplied, but if used on a thick bag, it just doesn&apos;t seal properly as it has a weak spot.<br>
you can fix the weak spot by just using the sleeve that I added to the stl files... but to improve the clip I added reinforcements to the sides where the circular section meets the straight sections. This is its weakest spot... and the added reinforcements make is to much stronger that you almost don&apos;t need the sleeve... but for peace of mind, I reckon it should still be used.</p>
<p>I printed everything at 100% infill. And at 100% infill, the original flexed a lot. I can&apos;t believe that people printed this at 10% infill and it didn&apos;t break.<br>
With the reinforcements I added and 100% infill it is super strong.</p>
<p>I also changed the thickness of the latch (made it thinner so it is easier to flex) and added a lug to it, so it is easier to open the clip when you need to remove it.</p>
<p>I made the clip longer as the supplied size was no large enough to fit the bags that I wanted to clip. Mine is approx 160mm long.</p>
<p>I made up a template so that I can easily resize the clip to any length that I need.<br>
So if you need one to be a specific length but are unable to edit it your self, let me know how long you need it.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=3dfillies.com.au+pla+&amp;tag=tv-auto-20" target="_blank">
                        3dfillies.com.au pla                     </a>

                    white
</body></html>

Bag Clip with screw cap

The original clip is a great idea, and the hinge mechanism is brilliantly designed.
After printing it, and using it, it has some fundamental design flaws... it does work the way it is supplied, but if used on a thick bag, it just doesn't seal properly as it has a weak spot.
you can fix the weak spot by just using the sleeve that I added to the stl files... but to improve the clip I added reinforcements to the sides where the circular section meets the straight sections. This is its weakest spot... and the added reinforcements make is to much stronger that you almost don't need the sleeve... but for peace of mind, I reckon it should still be used.

I printed everything at 100% infill. And at 100% infill, the original flexed a lot. I can't believe that people printed this at 10% infill and it didn't break.
With the reinforcements I added and 100% infill it is super strong.

I also changed the thickness of the latch (made it thinner so it is easier to flex) and added a lug to it, so it is easier to open the clip when you need to remove it.

I made the clip longer as the supplied size was no large enough to fit the bags that I wanted to clip. Mine is approx 160mm long.

I made up a template so that I can easily resize the clip to any length that I need.
So if you need one to be a specific length but are unable to edit it your self, let me know how long you need it.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Basic Icing bag nozzle. Shape: 8 points star.<br>
I am including the model for Blender. Feel free to remix.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>QIDI X-Plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=does+not+matter+PLA+&amp;tag=tv-auto-20" target="_blank">
                        does not matter PLA                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I have printed it in PLA 0.3 / 40% just to speed up the printing process, but feel free to experiment with 0.2 / 20%</p></div>
</body></html>

Pastry Icing Bag Nozzle

Basic Icing bag nozzle. Shape: 8 points star. 
I am including the model for Blender. Feel free to remix.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I made this adapter right before Halloween<br>
This will be used to put on a stick or broom stick. The diameter of the hole is about 19mm wide, you can resize to fit the &quot;broomstick&quot; you have.<br>
Sorry i didnt have time to make different sizes.</p>
<p>One is used for candy baskets and the other for candy bags to keep them open when trick or treating.</p>
<p>This was designed to keep social distancing in mind and to trick or treat to not miss out on the experience during Covid. You dont have to eat the candy just have FUN</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>above 30 for strength</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=inland+PETG&amp;tag=tv-auto-20" target="_blank">
                        inland PETG                    </a>

                    orange
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>You can adjust the File to lay sideways for strength of the candy bag extension stick. Or the print may break if it is too heavy. </p></div>
</body></html>

Halloween Adapter for Candy Bag

I made this adapter right before Halloween
This will be used to put on a stick or broom stick. The diameter of the hole is about 19mm wide, you can resize to fit the "broomstick" you have.
Sorry i didnt have time to make different sizes.

One is used for candy baskets and the other for candy bags to keep them open when trick or treating.

This was designed to keep social distancing in mind and to trick or treat to not miss out on the experience during Covid. You dont have to eat the candy just have FUN



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just a simple, easy to print dog poop bag holder you can mount on the wall. It has a slot for you to feed the bags through right off the roll for easy dispensing. print with no supports and use a couple small flat head screws for mounting. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=hatchbox+pla&amp;tag=tv-auto-20" target="_blank">
                        hatchbox pla                    </a>

                    any
</body></html>

Dog Poop Bag Holder

Just a simple, easy to print dog poop bag holder you can mount on the wall. It has a slot for you to feed the bags through right off the roll for easy dispensing. print with no supports and use a couple small flat head screws for mounting. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A simple grocery hook. Seems like all the ones I found were hard edges that would be too sharp, so I made one that has a chamfered edge on both sides. It&apos;s been mirrored and is pretty thick, so it should get the job done. Make sure to scale it 25.4 times upward, it&apos;ll be loaded in mm instead of inches for some reason.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Maker Select</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2 mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GeeeTech++PLA&amp;tag=tv-auto-20" target="_blank">
                        GeeeTech  PLA                    </a>

                    Silk Silver
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Scale 25.4 to get the proper scaling<br>
Or if you want it to perfectly fit your hand: Measure your hand&apos;s width at the knuckles, add half an inch divide 3 by your measurement then multiply by 25.4</p></div>
</body></html>

Grocery Hook

A simple grocery hook. Seems like all the ones I found were hard edges that would be too sharp, so I made one that has a chamfered edge on both sides. It's been mirrored and is pretty thick, so it should get the job done. Make sure to scale it 25.4 times upward, it'll be loaded in mm instead of inches for some reason.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a rack tubing (10mm) protection for Crosso Mounting System<br><a rel="nofollow" href="http://crosso.pl/en/technology/mounting-system/">http://crosso.pl/en/technology/mounting-system/</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Geeteck i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>55%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sainsmart+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Sainsmart TPU                     </a>

                    Blue
</body></html>

Rack tubing (10mm) protection for Crosso Mounting System

Just my design of a rack tubing (10mm) protection for Crosso Mounting System 
http://crosso.pl/en/technology/mounting-system/

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Clip-on grocery bag holder for hanging grocery bags inside of a 35 qt waste bin.</p>
<p>These are the exact waste bins I have: <a rel="nofollow" href="https://www.amazon.com/dp/B005MDW8OG/ref=cm_sw_r_cp_api_i_i2nKFbFQHG4YQ?_encoding=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/dp/B005MDW8OG/ref=cm_sw_r_cp_api_i_i2nKFbFQHG4YQ?_encoding=UTF8&amp;psc=1</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2mm</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=IDK+PLA&amp;tag=tv-auto-20" target="_blank">
                        IDK PLA                    </a>

                    White
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<p class="detail-image"><img src="https://cdn.thingiverse.com/assets/d4/39/15/10/de/Trash_Can_Print.jpeg"></p>
                <p class="detail-caption"><strong>The two sets of fingers allow you to layer multiple grocery bags inside one another.  After pulling out a full bag, just move the next bag to the outside fingers to create a wider opening.</strong></p>
                    <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/56/7d/63/7f/09/Trash_Can_Print_2.jpeg"></p>
</body></html>

Grocery Bag Holder for Trash Can

Clip-on grocery bag holder for hanging grocery bags inside of a 35 qt waste bin.

These are the exact waste bins I have: https://www.amazon.com/dp/B005MDW8OG/ref=cm_sw_r_cp_api_i_i2nKFbFQHG4YQ?_encoding=UTF8&psc=1

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a simple tag, key chain, bag tag whatever.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA                    </a>

                    Red
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I setup the dual color with a simple filament change.</p></div>
</body></html>

Milwaukee Tags

Just my design of a simple tag, key chain, bag tag whatever.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A free pouch from my bag set available on patreon with many more models :<br><a rel="nofollow" href="https://www.patreon.com/blendedminiatures">https://www.patreon.com/blendedminiatures</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Pouch (sample)

A free pouch from my bag set available on patreon with many more models :
https://www.patreon.com/blendedminiatures


Thingscanner

Some articles you might like

World’s first 3D-printed Football Bag | All3DP

3D Printed Voronoi Bag | All3DP

Show Only

Looking for tag: bag