Orange Pi or Raspberry Pi 3 B+? That's the question. Learn the differences between the Raspberry Pi 3 B+ and the Orange Pi.

Orange Pi vs Raspberry Pi 3 B+: The Differences | All3DP

Formlabs has raised $35 Million in Series B Funding, led by Foundry Group, and announces investment and planned collaboration with Autodesk.

Formlabs Raises $35 Million in Series B Funding, Announces Autodesk Collaboration | All3DP

Plan B, UK-based climate change activists, have partnered with ad folks at Martin Agency to release quirky snow-less snow globes.

Climate Change Activists Create 3D Printed "No-Snow-Globes" | All3DP

Predictions of calamity in the 3D printing industry are premature; online marketplace 3D Hubs scores $7 million dollars in Series B funding.

3D Hubs Secures Whopping $6,999,998 Investment | All3DP

As the Raspberry Pi 3B+ ages, new competitors are entering the scene. How does the new Banana Pi M3 compare?

Banana Pi vs Raspberry Pi 3 B+: The Differences | All3DP

Car maker Divergent 3D announces the completion of Series B funding. The $65-million raised will go toward building a new reference factory.

Divergent 3D Raises $65-Million for Experimental Factory | All3DP

Jump into this guide to find out how to install OctoPrint on the Raspberry Pi 3 B+, one of the most popular Pi boards available right now.

How to Set Up OctoPrint on Raspberry Pi 3 B+ – 3 Easy Steps | All3DP

A faster 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU. It is an updated version of the 64-bit Broadcom processor used in Raspberry Pi 3B. The new version incorporates power integrity optimizations and a heat spreader. According to the manufacturer, it can sustain high performance for longer periods. Dual-band 802.11ac wireless LAN and Bluetooth 4.2. Compared to its predecessor, Raspberry […]

New Raspberry Pi 3 B+: Faster Chipset, Better Network Features, Same Price | All3DP

Looking for a cool custom Raspberry Pi case? Check out our selection of Raspberry Pi cases to 3D print. From the Raspberry Pi 4 Model B to the evergreen models Pi 3, 3+ and 2.

50 Cool Custom Raspberry Pi Cases to 3D Print | All3DP

¿Buscas una carcasa Raspeberry Pi 3 personalizada para imprimir en 3D? Descubre nuestra lista de las 30 mejores carcasas Raspberry Pi 3 para imprimir en 3D, también compatible con Raspberry Pi 2 y el modelo B +.

30 carcasas Raspberry Pi 3 geniales para imprimir en 3D | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>About</h3>
<p>I&apos;ve always wanted to have a throttle panel for a twin engined plane, and this is my <strong>WIP</strong> design. I&apos;m planning to have dual throttles and reversers, prop levers, and mixture levers; some likely candidates are a couple more levers to the sides for airbrake and flaps, and gear controls.</p>
<p>The gear design on <a rel="nofollow" href="/thing:4445717">this (not mine) throttle panel</a> I found and built a while ago is a very clean and clever design, but I disliked tha size and shape of the box overall. So I kept the multiplier gear idea and redid it from scratch to my liking.</p>
<p>Design is inspired on B737 and DH8C panels, so it&apos;s  a sort of Frankestein monster in between.</p>
<h3>Updates</h3>
<p>20201108: Added prop levers. Base not yet done, needs modification on throttle_base for placing a couple switches (feathering)</p>
<p>20201114: Finished Prop base, trimmed down cover_grip_prop so it fits better against imperfections on lever2</p>
<p>20201114_2: Added Mixture controls, reuses all parts from prop assembly except lever and grip cover</p>
<h3>Printing tips</h3>
<ul><li>Parts are designed to minimize the amount of supports needed and have as much symmetrical parts as possible. Place the parts on their flat side and use supports anywhere needed.</li>
<li>The holes on <em>support_singleaxis</em> need supports, but clearing them is a little hard)</li>
<li>Infill for axis holders should be 35%, levers at 35 too so center of mass is near the axis, and the remaining parts are fine at 15-20%</li>
</ul><h3>Electronics needed</h3>
<ul><li>Switches:
<ul><li>EC11 rotary encoders</li>
<li>WH148 potentiometers (10K or 5K)</li>
<li>M20 microswitches</li>
</ul></li>
<li>Lots of dupont wires</li>
<li>Arduino Leonardo</li>
</ul><h3>Building tips</h3>
<p>I recommend straping some sponge or cloth on the levers, so they have better grip.</p>
<h3>Software</h3>
<p>Software side can be done with Arduino Joystick Library or MMJoy2. Not done yet</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Artillery Genius</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>check summary</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Geeetech+PLA&amp;tag=tv-auto-20" target="_blank">
                        Geeetech PLA                    </a>

                    White
</body></html>

throttle panel for flightsim

#About
I've always wanted to have a throttle panel for a twin engined plane, and this is my **WIP** design. I'm planning to have dual throttles and reversers, prop levers, and mixture levers; some likely candidates are a couple more levers to the sides for airbrake and flaps, and gear controls.

The gear design on [this (not mine) throttle panel](https://www.thingiverse.com/thing:4445717) I found and built a while ago is a very clean and clever design, but I disliked tha size and shape of the box overall. So I kept the multiplier gear idea and redid it from scratch to my liking.

Design is inspired on B737 and DH8C panels, so it's  a sort of Frankestein monster in between.

#Updates
20201108: Added prop levers. Base not yet done, needs modification on throttle_base for placing a couple switches (feathering)

20201114: Finished Prop base, trimmed down cover_grip_prop so it fits better against imperfections on lever2

20201114_2: Added Mixture controls, reuses all parts from prop assembly except lever and grip cover

#Printing tips
* Parts are designed to minimize the amount of supports needed and have as much symmetrical parts as possible. Place the parts on their flat side and use supports anywhere needed.
* The holes on *support_singleaxis* need supports, but clearing them is a little hard)
* Infill for axis holders should be 35%, levers at 35 too so center of mass is near the axis, and the remaining parts are fine at 15-20%

#Electronics needed

* Switches:
  - EC11 rotary encoders
  - WH148 potentiometers (10K or 5K)
  - M20 microswitches
* Lots of dupont wires
* Arduino Leonardo

#Building tips
I recommend straping some sponge or cloth on the levers, so they have better grip.

#Software
Software side can be done with Arduino Joystick Library or MMJoy2. Not done yet

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The sun is your weapon, use it well</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

destiny 2 Hammer of sol

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Several canopys for RC Helicopter Blade 130x with slightly different shapes.<br>
Print vertical with enough outer support, see picture.<br>
Have Fun!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>not required</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=DasFilament+PLA&amp;tag=tv-auto-20" target="_blank">
                        DasFilament PLA                    </a>

                    your choice
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printing vertical only needs outer supports and hence least rework.</p></div>
</body></html>

Canopys for Blade 130x

Several canopys for RC Helicopter Blade 130x with slightly different shapes.
Print vertical with enough outer support, see picture.
Have Fun!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.</p>
<p>We really like <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>, but we needed something slightly different. Rather than modify guppyk&apos;s model, we chose to create a similar design in OpenSCAD that is fully customizable.</p>
<h3>OpenSCAD Customizer Options</h3>
<p>You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.</p>
<h3>Single Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code> - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Stem</h4>
<ul><li><code>Stem_Material_Thickness</code> - Thickness of stem (X and Y axis)</li>
<li><code>Stem_Height</code> - Height of stem (Z axis)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Grip_Width</code> - Width of grip (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Square_Handle</code> - Should the handle be square?</li>
</ul><h4>Base</h4>
<ul><li><code>Base_Enabled</code> - Should a base be added?</li>
<li><code>Base_Lip_Width</code> - Width of base lip (X and Y axis)</li>
<li><code>Base_Lip_Height</code> - Height of base lip (Z axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Dual Point Variant</h3>
<p>OpenSCAD Customizer Options:</p>
<h4>Screws</h4>
<ul><li><code>Screw_Distance</code> - Distance between the screws</li>
<li><code>Screw_Hole_Diameter</code> - Screw hole diameter</li>
<li><code>Screw_Head_Hole_Diameter</code> - Screw head hole diameter</li>
<li><code>Screw_Material_Thickness</code> - Material thickness (between screw head and base)</li>
<li><code>Screw_Countersink_Angle</code>  - Screw countersink angle (82 and 90 are common)</li>
</ul><h4>Handle</h4>
<ul><li><code>Handle_Material_Thickness</code> - Thickness of handle (X and Y axis)</li>
<li><code>Handle_Height</code> - Height of handle (Z axis)</li>
<li><code>Handle_End_Length</code> - Handle end length (in addition to Handle_Material_Thickness)</li>
</ul><h4>Hand Hole</h4>
<ul><li><code>Hand_Hole_Width</code> - Width of hand hole (X axis)</li>
<li><code>Hand_Hole_Depth</code> - Depth of hand hole (Y axis)</li>
</ul><h4>Bevel</h4>
<ul><li><code>Bevel_Radius</code> - Radius of bevel</li>
<li><code>Bevel_Rounded</code> - Should bevel be rounded?</li>
</ul><h3>Versions</h3>
<h3>Single Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Dual Point Variant</h3>
<ul><li>1.0 (4 Nov 2020) - Initial version</li>
</ul><h3>Printing</h3>
<p>Recommended slicer settings:</p>
<ul><li>Resolution: 0.1mm - 0.2mm</li>
<li>Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)</li>
<li>Supports: Doesn&apos;t Matter</li>
<li>Rafts: Doesn&apos;t Matter</li>
</ul><p>For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called <code>Z Seam Alignment</code>.</p>
<p>For small single point handles, you may need a print with a brim.</p>
<h3>Attribution</h3>
<p>This work, <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> was inspired by <a rel="nofollow" href="/guppyk/">guppyk&apos;s</a> <a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a>.</p>
<p>Whilst some of the models included in the project may appear similar to the models from guppyk&apos;s project, the code and files in this project do not include any of the code or files from guppyk&apos;s project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).</p>
<p>Although we do not believe this project can strictly be considered a derivative (or &apos;remix&apos; in Thingiverse parlance) of guppyk&apos;s project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a &apos;remix&apos; of guppyk&apos;s project on Thingiverse to show our appreciation.</p>
<p><a rel="nofollow" href="/thing:4619895">Handle - All Purpose, Four Sizes</a> by <a rel="nofollow" href="/guppyk/">guppyk</a> is licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="/guppyk/">guppyk</a>.</p>
<h3>License</h3>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> models (.stl) are licensed under the <a rel="nofollow" href="https://creativecommons.org/licenses/by/4.0/">CC BY</a> license by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p>
<p>The <a rel="nofollow" href="/thing:4642544">Fully Customizable General Purpose Handles</a> code (.scad &amp; .json) is licensed under <a rel="nofollow" href="https://opensource.org/licenses/MIT">The MIT License</a> by <a rel="nofollow" href="https://codeandmake.com">Code and Make</a>.</p></div>
</body></html>

Fully Customizable General Purpose Handles

Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points.

We really like [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895), but we needed something slightly different. Rather than modify guppyk's model, we chose to create a similar design in OpenSCAD that is fully customizable.

OpenSCAD Customizer Options
---------------------------

You can customize everything from the size and position of the screw holes to the overall dimensions of the handle and the style of the bevel.

### Single Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle` - Screw countersink angle (82 and 90 are common)

#### Stem

* `Stem_Material_Thickness` - Thickness of stem (X and Y axis)
* `Stem_Height` - Height of stem (Z axis)

#### Handle

* `Handle_Grip_Width` - Width of grip (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Square_Handle` - Should the handle be square?

#### Base

* `Base_Enabled` - Should a base be added?
* `Base_Lip_Width` - Width of base lip (X and Y axis)
* `Base_Lip_Height` - Height of base lip (Z axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

### Dual Point Variant

OpenSCAD Customizer Options:

#### Screws

* `Screw_Distance` - Distance between the screws
* `Screw_Hole_Diameter` - Screw hole diameter
* `Screw_Head_Hole_Diameter` - Screw head hole diameter
* `Screw_Material_Thickness` - Material thickness (between screw head and base)
* `Screw_Countersink_Angle`  - Screw countersink angle (82 and 90 are common)

#### Handle

* `Handle_Material_Thickness` - Thickness of handle (X and Y axis)
* `Handle_Height` - Height of handle (Z axis)
* `Handle_End_Length` - Handle end length (in addition to Handle_Material_Thickness)

#### Hand Hole

* `Hand_Hole_Width` - Width of hand hole (X axis)
* `Hand_Hole_Depth` - Depth of hand hole (Y axis)

#### Bevel

* `Bevel_Radius` - Radius of bevel
* `Bevel_Rounded` - Should bevel be rounded?

Versions
--------

### Single Point Variant

* 1.0 (4 Nov 2020) - Initial version

### Dual Point Variant

* 1.0 (4 Nov 2020) - Initial version


Printing
--------

Recommended slicer settings:

* Resolution: 0.1mm - 0.2mm
* Infill: ~50% for soft filaments, such as PLA (could probably be lower for tougher filaments, such as ABS)
* Supports: Doesn't Matter
* Rafts: Doesn't Matter

For round single point handles, you may wish to consider randomising the start position of each layer to avoid a Z seam. In Cura this option is called `Z Seam Alignment`.

For small single point handles, you may need a print with a brim.

Attribution
-----------

This work, [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) was inspired by [guppyk's](https://www.thingiverse.com/guppyk/) [Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895).

Whilst some of the models included in the project may appear similar to the models from guppyk's project, the code and files in this project do not include any of the code or files from guppyk's project. All of the STLs in this project are original and were generated using code that was developed, in full, by Code and Make (i.e. from the .scad file included in this project).

Although we do not believe this project can strictly be considered a derivative (or 'remix' in Thingiverse parlance) of guppyk's project, we believe it is fair and proper to give credit to guppyk for the original design concept. For this reason, we have marked this project as a 'remix' of guppyk's project on Thingiverse to show our appreciation.

[Handle - All Purpose, Four Sizes](https://www.thingiverse.com/thing:4619895) by [guppyk](https://www.thingiverse.com/guppyk/) is licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [guppyk](https://www.thingiverse.com/guppyk/).

License
-------

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) models (.stl) are licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [Code and Make](https://codeandmake.com).

The [Fully Customizable General Purpose Handles](https://www.thingiverse.com/thing:4642544) code (.scad & .json) is licensed under [The MIT License](https://opensource.org/licenses/MIT) by [Code and Make](https://codeandmake.com).

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.</p>
<p>This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.</p>
<p>The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.</p>
<p>The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be &quot;worked&quot; a little after assembly before its mounted on the printer.</p>
<p>This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.</p>
<p>BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement</p>
<p>You need a total of 25 links, and about 30 clips</p>
<p>Mounted to the frame with 2X M4 T nuts</p>
<p>The fanduct is a remake of<br><a rel="nofollow" href="/thing:4091776">https://www.thingiverse.com/thing:4091776</a></p>
<p>The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.</p>
<p>You can find the fan mount here<br><a rel="nofollow" href="/thing:4616767">https://www.thingiverse.com/thing:4616767</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Kay3D Core XY  Ender 5 plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Form+Futura+PLA&amp;tag=tv-auto-20" target="_blank">
                        Form Futura PLA                    </a>

                    Black
</body></html>

Ender 5 plus, KAY3D CoreXY, Modification pack.

This is a dragchain i made for my Kay CoreXY setup, with a Hemera hotend and BL touch.

This setup have been tested and for those who have downloaded earlier versions, there have been some adjustements.
 
The BL_touch is now relocated to make a more compact and functional design. The frame bracket for the chain have been fortified.

The chain is drawn with 0.4 nozzle tolearance, but is made extremely tight, the reason for this, is to prevent sag in the chain when its used for a few hrs. The chain need to be "worked" a little after assembly before its mounted on the printer.

This Hemera mount is using 3 of the 4 Hemera mounting brackets, that way, the hemera can be mounted while the cradle is still on the X beam.

BL touch offset is +22.6 and +0.05, height about -3, this will need fineadjustement

You need a total of 25 links, and about 30 clips

Mounted to the frame with 2X M4 T nuts

The fanduct is a remake of
https://www.thingiverse.com/thing:4091776

The mounting bracket did not fit my needs, so i used the cooling fangs from the original thing, and made a new mounting bracket, fitting my Kay CoreXY convertion.

You can find the fan mount here
https://www.thingiverse.com/thing:4616767

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>&#xE9;querres simples pour petite &#xE9;tag&#xE8;re.<br>
Simple brackets for little shelf.</p>
<p>Longueur de contacte avec l&apos;&#xE9;tag&#xE8;re : 7cm(v2) et 11cm(v4).<br>
Longueur de contacte avec le mur : 6,7cm.</p>
<p>Diam&#xE8;tre des trous : 4mm.<br>
Diam&#xE8;tre des trous pour les t&#xEA;tes de visses : 7mm.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>40%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PLA&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PLA                    </a>

                    Gris
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-title"><strong>Fusion 360</strong></p>
                <div><p>Avec des fonctionnalit&#xE9;s basiques, facile &#xE0; reproduire.</p></div>
</body></html>

équerre simple

équerres simples pour petite étagère.
Simple brackets for little shelf.

Longueur de contacte avec l'étagère : 7cm(v2) et 11cm(v4).
Longueur de contacte avec le mur : 6,7cm.

Diamètre des trous : 4mm.
Diamètre des trous pour les têtes de visses : 7mm.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Version one is designed for single filament printers.<br>
Version two (MMU) is designed for multi material printers.</p>
<p>Help support my design work by visiting my referral links:<br>
Upland referral (virtual property trading game): <a rel="nofollow" href="https://r.upland.me/qk9X">https://r.upland.me/qk9X</a><br>
Brave Browser referral: <a rel="nofollow" href="https://brave.com/tod573">https://brave.com/tod573</a></p>
<p>Visit my website: <a rel="nofollow" href="https://StarLabs3D.com">https://StarLabs3D.com</a></p>
<p>My YouTube: <a rel="nofollow" href="https://www.youtube.com/c/ToddOlsen">https://www.youtube.com/c/ToddOlsen</a></p>
<p><strong><em>See video below</em></strong></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3 MK3 MMU 2</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Hatchbox+PLA&amp;tag=tv-auto-20" target="_blank">
                        Hatchbox PLA                    </a>

                    Tan, Brown, Black, Red
<h3 class="thing-component-header design how-i-designed-this">How I Designed This</h3>
<p class="detail-video"><iframe src="//www.youtube.com/embed/1cwOeWBrNh0" frameborder="0" allowfullscreen></iframe></p>
                <p class="detail-caption">https://www.youtube.com/c/ToddOlsen</p>
                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b7/11/9a/b3/8f/Crypto_Tip_Image.jpg"></p>
                <p class="detail-caption"><strong>https://StarLabs3D.com</strong></p>
</body></html>

Pirate Ship

Version one is designed for single filament printers.
Version two (MMU) is designed for multi material printers.

Help support my design work by visiting my referral links:
Upland referral (virtual property trading game): https://r.upland.me/qk9X
Brave Browser referral: https://brave.com/tod573

Visit my website: https://StarLabs3D.com

My YouTube: https://www.youtube.com/c/ToddOlsen

***See video below***


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Replacement canister holder clip for <a rel="nofollow" href="https://beaudens.com/collections/stick-vacuum-cleaner/products/broom-vacuum">Beaudens Stick Broom Vacuum Cleaner</a>. The thing is brittle, and I had to glue it twice already. Then I decided to recreate it in ABS. It turned out better than I expected.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>FlashForge</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2F3Byqk?tag=tv-auto-20" target="_blank">Dreamer</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.18</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>33%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Noname+ABS&amp;tag=tv-auto-20" target="_blank">
                        Noname ABS                    </a>

                    Any
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used ABS filament for better rigidity. Printed with linear supports. 33% 3D infill.</p></div>
</body></html>

Replacement button for vacuum cleaner

Replacement canister holder clip for [Beaudens Stick Broom Vacuum Cleaner](https://beaudens.com/collections/stick-vacuum-cleaner/products/broom-vacuum). The thing is brittle, and I had to glue it twice already. Then I decided to recreate it in ABS. It turned out better than I expected.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>1x1&quot; aluminum drill fixture, Easy way to fixture a 1&quot; or 1.5&quot; hole pattern:</p>
<p>Easy way to lighten your 1x1&quot; alum tubing and have it look professional. Mount to your drill press, can screw to plywood or 2x4 for ease of mounting. drill first hole in tube, place hole over protrusion, drill new hole and repeat. (set for 1/2&quot; drill)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Fusion3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>80-100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=hatchbox+ABS&amp;tag=tv-auto-20" target="_blank">
                        hatchbox ABS                    </a>

                    Black
</body></html>

1x1" aluminum drill fixture, Easy way to fixture a 1" or 1.5" hole pattern

1x1" aluminum drill fixture, Easy way to fixture a 1" or 1.5" hole pattern:

Easy way to lighten your 1x1" alum tubing and have it look professional. Mount to your drill press, can screw to plywood or 2x4 for ease of mounting. drill first hole in tube, place hole over protrusion, drill new hole and repeat. (set for 1/2" drill)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a box that hangs off the side of your desk via the screw down. Super Simple.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+ABS&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex ABS                    </a>

                    Black
</body></html>

Desk Box

Just my design of a box that hangs off the side of your desk via the screw down. Super Simple.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Filament extruder bowden coupling for Monoprice Select Mini</p>
<p>This is my first remix,<br>
taked from <a rel="nofollow" href="/thing:1993384">https://www.thingiverse.com/thing:1993384</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Select Mini</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.0875</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Fiberlogy+PLA&amp;tag=tv-auto-20" target="_blank">
                        Fiberlogy PLA                    </a>

                    grey
</body></html>

Extruder Bowden coupling for MP Select Mini

Filament extruder bowden coupling for Monoprice Select Mini

This is my first remix,
taked from https://www.thingiverse.com/thing:1993384


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Fusion 360 parametric nuts and bolts.</p>
<p>Check the youtube videos here:<br><a rel="nofollow" href="https://youtu.be/daLb9Ahk_aE">https://youtu.be/daLb9Ahk_aE</a><br><a rel="nofollow" href="https://youtu.be/l49myOC5t7A">https://youtu.be/l49myOC5t7A</a><br><a rel="nofollow" href="https://youtu.be/WSnnrS_U2QY">https://youtu.be/WSnnrS_U2QY</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Mk1</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Prima+PLA&amp;tag=tv-auto-20" target="_blank">
                        Prima PLA                    </a>

                    Black
</body></html>

Fusion 360 parametric nuts and bolts

Fusion 360 parametric nuts and bolts.

Check the youtube videos here:
https://youtu.be/daLb9Ahk_aE
https://youtu.be/l49myOC5t7A
https://youtu.be/WSnnrS_U2QY

Thingscanner

Some articles you might like