Aviation giant enlists Norsk Titanium to make structural parts for 787 Dreamliner aircraft, potentially saving millions in production costs.

Boeing Innovates With Cost-Cutting Printed Titanium Parts | All3DP

Students from Inholland University of Applied Sciences are building a fully 3D printed rocket as a part of their aviation technology course.

Blast Off with This Fully 3D Printed Rocket Lesson Plan | All3DP

In a collaboration between JetPack Aviation and Airwolf 3D, a lightweight jetpack with 3D parted parts makes Buzz Lightyear cosplay a distinct possibility.

JetPack Aviation: Take to the Skies with 3D Printed Parts | All3DP

General Electric are building a factory in Prague, Czech Republic that will produce a turboprop engine using 3D printed parts.

GE’s Aviation Plant in Prague to Build Engines with 3D Printed Parts | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Northrop Grumman EA-6B Prowler</h3>
<p>The Northrop Grumman EA-6B Prowler is a twin-engine, four-seat, mid-wing electronic-warfare aircraft. The Prowler was in service with the U.S. Armed Forces from 1971 until 2019. It has carried out numerous missions for jamming enemy radar systems, and in gathering radio intelligence on those and other enemy air defense systems. </p>
<p>From the 1998 retirement of the United States Air Force EF-111 Raven electronic warfare aircraft, the EA-6B was the only dedicated electronic warfare plane available for missions by the U.S. Navy, the U.S. Marine Corps, and the U.S. Air Force until the fielding of the Navy&apos;s EA-18G Growler in 2009. Following its last deployment in late 2014, the EA-6B was withdrawn from U.S. Navy service in June 2015, followed by the USMC in March 2019.</p>
<p><a rel="nofollow" href="https://en.wikipedia.org/wiki/Northrop_Grumman_EA-6B_Prowler">Wikipedia</a></p>
<h3>The print</h3>
<p>I have included 7 files.The first file is the kit card itself. This card is only provided with loop on the body. The second and third file is the main body. One is with a ring/loop and the other is a clean version.<br>
Main body. Print 1x<br>
Main wing. Print 1x<br>
Rear wing. Print 1x<br>
Intake. Print 2x<br>
UnderTheWingThing. Print 4x (I don&apos;t know what this is. If you know it, let me know!)</p>
<h3>More designs</h3>
<p>Let me know what you think of it! This is my secondkit card so probably not the best, but it was really fun to design and print. If you like this design check my profile for more and make sure you check <a rel="nofollow" href="/nakozen/designs">Nakozen his profile for more designs!</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10% and higher</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=REAL+Filament+PLA&amp;tag=tv-auto-20" target="_blank">
                        REAL Filament PLA                    </a>

                    White
</body></html>

EA-6B Prowler Kit Card

<h1>Northrop Grumman EA-6B Prowler</h1>
The Northrop Grumman EA-6B Prowler is a twin-engine, four-seat, mid-wing electronic-warfare aircraft. The Prowler was in service with the U.S. Armed Forces from 1971 until 2019. It has carried out numerous missions for jamming enemy radar systems, and in gathering radio intelligence on those and other enemy air defense systems. 

From the 1998 retirement of the United States Air Force EF-111 Raven electronic warfare aircraft, the EA-6B was the only dedicated electronic warfare plane available for missions by the U.S. Navy, the U.S. Marine Corps, and the U.S. Air Force until the fielding of the Navy's EA-18G Growler in 2009. Following its last deployment in late 2014, the EA-6B was withdrawn from U.S. Navy service in June 2015, followed by the USMC in March 2019.

[Wikipedia](https://en.wikipedia.org/wiki/Northrop_Grumman_EA-6B_Prowler)

<h2>The print</h2>
I have included 7 files.The first file is the kit card itself. This card is only provided with loop on the body. The second and third file is the main body. One is with a ring/loop and the other is a clean version.
Main body. Print 1x
Main wing. Print 1x
Rear wing. Print 1x
Intake. Print 2x
UnderTheWingThing. Print 4x (I don't know what this is. If you know it, let me know!)

<h2>More designs</h2>
Let me know what you think of it! This is my secondkit card so probably not the best, but it was really fun to design and print. If you like this design check my profile for more and make sure you check [Nakozen his profile for more designs!](https://www.thingiverse.com/nakozen/designs)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This type of enclosure is built around TTGO T-xx LoRaWAN GNSS tracker board.</p>
<p>SoftRF is an open project (GNU GPL) of aircraft collision avoidance avionics.</p>
<p>SoftRF is compatible with four most common ISM band  aircraft collision avoidance protocols:</p>
<ul><li>&quot;Air V6&quot; ;</li>
<li>OGN tracker ;</li>
<li>PilotAware ;</li>
<li>FANET+ (Skytraxx).</li>
</ul><p>Website: <a rel="nofollow" href="http://github.com/lyusupov/SoftRF">http://github.com/lyusupov/SoftRF</a></p>
<p><strong>NOTICE</strong>: This design is applicable for pre-production sample of the Txx. Other revisions may or may not match.</p>
<p>It is designed to fit a 40 x 30 x 8 mm 1000 mAh Li-Po battery.</p>
<p>If you are unable to print these parts by yourself - you may consider to find an appropriate local 3D service provider and place an order with assistance of <a rel="nofollow" href="http://www.treatstock.com">Treatstock</a> or <a rel="nofollow" href="http://www.3dhubs.com">3DHubs</a> portals.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>Connect battery to the board with JST 1.25mm 2pin female plug.<br>
Fasten the Txx board to the enclosure&apos;s main body with two 2.5x10 mm screws. Put face plate on top of the assembly.</p></div>
</body></html>

SoftRF case for Badge Edition ( TTGO T-xx )

This type of enclosure is built around TTGO T-xx LoRaWAN GNSS tracker board.

SoftRF is an open project (GNU GPL) of aircraft collision avoidance avionics.

SoftRF is compatible with four most common ISM band  aircraft collision avoidance protocols:
- "Air V6" ;
- OGN tracker ;
- PilotAware ;
- FANET+ (Skytraxx).

Website: http://github.com/lyusupov/SoftRF

**NOTICE**: This design is applicable for pre-production sample of the Txx. Other revisions may or may not match.

It is designed to fit a 40 x 30 x 8 mm 1000 mAh Li-Po battery.

If you are unable to print these parts by yourself - you may consider to find an appropriate local 3D service provider and place an order with assistance of [Treatstock](http://www.treatstock.com) or [3DHubs](http://www.3dhubs.com) portals.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I really liked Vince_Prints&apos; throttle design but I didn&apos;t want to spend the money on buttons and a key-switch as I don&apos;t really need them with my set-up. I&apos;ve basically just cut the top half off. I was sort of forced to just trace over his design in Fusion so it&apos;s not the exact same but the dimensions are accurate and I&apos;ve printed a working model. I have also included a working 3D printable spring. I&apos;ve printed it out and plan on using it for the life-time of this throttle. Please let me know if you have any questions regarding this design or if there are suggestions! Great design Vince. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Black-Widow </p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.25</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ZIRO+PLA&amp;tag=tv-auto-20" target="_blank">
                        ZIRO PLA                    </a>

                    Clear
</body></html>

CadetThrottle: Slim/throttle only + 3dPrinted Spring

I really liked Vince_Prints' throttle design but I didn't want to spend the money on buttons and a key-switch as I don't really need them with my set-up. I've basically just cut the top half off. I was sort of forced to just trace over his design in Fusion so it's not the exact same but the dimensions are accurate and I've printed a working model. I have also included a working 3D printable spring. I've printed it out and plan on using it for the life-time of this throttle. Please let me know if you have any questions regarding this design or if there are suggestions! Great design Vince. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Esse &#xE9; o MDf ou PDF da Garmini, modelo G1000 equipado na maioria das aeronaves de pequeno porte.</p>
<p>segue o link dos itens necess&#xE1;rios:</p>
<p><a rel="nofollow" href="https://pt.aliexpress.com/item/32954126627.html?spm=a2g0o.productlist.0.0.1fd56151Byie4v&amp;algo_pvid=63d965b6-ebb6-476f-9cae-49b03dc18828&amp;algo_expid=63d965b6-ebb6-476f-9cae-49b03dc18828-11&amp;btsid=0bb0623916051300823853246e9c9b&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_">https://pt.aliexpress.com/item/32954126627.html?spm=a2g0o.productlist.0.0.1fd56151Byie4v&amp;algo_pvid=63d965b6-ebb6-476f-9cae-49b03dc18828&amp;algo_expid=63d965b6-ebb6-476f-9cae-49b03dc18828-11&amp;btsid=0bb0623916051300823853246e9c9b&amp;ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_</a></p>
<p><a rel="nofollow" href="http://www.tiggercomp.com.br/novaloja/product_info.php?products_id=8375">http://www.tiggercomp.com.br/novaloja/product_info.php?products_id=8375</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ABS+ABS&amp;tag=tv-auto-20" target="_blank">
                        ABS ABS                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Confeccionado em ABS e montado com cola instant&#xE2;nea. Impresso &#xE0; 60 mm/s</p></div>
</body></html>

Garmin G1000 completo

Esse é o MDf ou PDF da Garmini, modelo G1000 equipado na maioria das aeronaves de pequeno porte.

segue o link dos itens necessários:

https://pt.aliexpress.com/item/32954126627.html?spm=a2g0o.productlist.0.0.1fd56151Byie4v&algo_pvid=63d965b6-ebb6-476f-9cae-49b03dc18828&algo_expid=63d965b6-ebb6-476f-9cae-49b03dc18828-11&btsid=0bb0623916051300823853246e9c9b&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

http://www.tiggercomp.com.br/novaloja/product_info.php?products_id=8375



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This type of enclosure is built around <a rel="nofollow" href="https://s.click.aliexpress.com/e/_AaoUDH">Heltec CubeCell-GPS</a> LoRaWAN GNSS tracker board.</p>
<p>SoftRF is an open project (GNU GPL) of aircraft collision avoidance avionics.</p>
<p>SoftRF is compatible with four most common ISM band  aircraft collision avoidance protocols:</p>
<ul><li>&quot;Air V6&quot; ;</li>
<li>OGN tracker ;</li>
<li>PilotAware ;</li>
<li>FANET+ (Skytraxx).</li>
</ul><p>Website: <a rel="nofollow" href="http://github.com/lyusupov/SoftRF">http://github.com/lyusupov/SoftRF</a></p>
<p>There are three variants of main <strong>Body</strong> part:</p>
<ul><li>with no pin header access (-NPH file name suffix)</li>
<li>with partial pin header (-PPH suffix)</li>
<li>with full pin header access (-FPH)</li>
</ul><p>The enclosure is designed to fit a 44 x 22 x 6 mm 600 mAh Li-Po battery.</p>
<p>If you are unable to print these parts by yourself - you may consider to find an appropriate local 3D service provider and place an order with assistance of <a rel="nofollow" href="http://www.treatstock.com">Treatstock</a> or <a rel="nofollow" href="http://www.3dhubs.com">3DHubs</a> portals.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Use of heat-resistant filament (such as ABS) is recommended. </p></div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<div><p>Connect battery to the board with JST 1.25mm 2pin female plug.  Place HTCC-AB02S board into the enclosure&apos;s main body.<br>
Connect with SMA pigtail.<br>
Put lid on top of the assembly. Fasten the lid with four 2.5x10 mm screws.</p></div>
</body></html>

SoftRF case for Mini Edition ( Heltec CubeCell-GPS HTCC-AB02S)

This type of enclosure is built around [Heltec CubeCell-GPS](https://s.click.aliexpress.com/e/_AaoUDH) LoRaWAN GNSS tracker board.

SoftRF is an open project (GNU GPL) of aircraft collision avoidance avionics.

SoftRF is compatible with four most common ISM band  aircraft collision avoidance protocols:
- "Air V6" ;
- OGN tracker ;
- PilotAware ;
- FANET+ (Skytraxx).

Website: http://github.com/lyusupov/SoftRF

There are three variants of main **Body** part:
- with no pin header access (-NPH file name suffix)
- with partial pin header (-PPH suffix)
- with full pin header access (-FPH)

The enclosure is designed to fit a 44 x 22 x 6 mm 600 mAh Li-Po battery.

If you are unable to print these parts by yourself - you may consider to find an appropriate local 3D service provider and place an order with assistance of [Treatstock](http://www.treatstock.com) or [3DHubs](http://www.3dhubs.com) portals.



<p><b>Printed on Ultimaker 2 :</b><br>- 10% infill<br>- 1.5 mm shell thickness<br>- ~30/45 min to print on custom fast settings<br><br>This does not obstruct the JR bay.<br><br><b>Needed: </b><br>- 2x m3x12 <br>- 2x m3x10 <br><br>Make sure the screws are tapping their own thread into the plastic, it needs to twist in firmly.<br><br><b>Design changes:</b><br>07-03-2014 : Fixed orientation problem</p>


9XR angled mount for TSLRS TX700

Printed on Ultimaker 2 :- 10% infill- 1.5 mm shell thickness- ~30/45 min to print on custom fast settingsThis does not obstruct the JR bay.Needed: - 2x m3x12 - 2x m3x10 Make sure the screws are tapping their own thread into the plastic, it needs to twist in firmly.Design changes:07-03-2014 : Fixed orientation problem


<p>There is a complete one piece fan, you can try to print it using a SLA/SLS or other advanced printing method. Also there are separately rotor and blade files, It&apos;s the best option for FDM printers. For complete one fan, You must print 18 blades preferably in vertical position, and glue them to the rotor. Its diammeter is 150mm.<br></p><p>It is intended for 3d printing and use only for have a curious/decoration piece, I don&apos;t recommend to install it on a motor, It could be very dangerous.</p><p>Enjoy!</p>


Jet Engine Fan

There is a complete one piece fan, you can try to print it using a SLA/SLS or other advanced printing method. Also there are separately rotor and blade files, It's the best option for FDM printers. For complete one fan, You must print 18 blades preferably in vertical position, and glue them to the rotor. Its diammeter is 150mm.It is intended for 3d printing and use only for have a curious/decoration piece, I don't recommend to install it on a motor, It could be very dangerous.Enjoy!


Thingscanner

Some articles you might like

Boeing Innovates With Cost-Cutting Printed Titanium Parts | All3DP

Blast Off with This Fully 3D Printed Rocket Lesson Plan | All3DP

JetPack Aviation: Take to the Skies with 3D Printed Parts | All3DP

GE’s Aviation Plant in Prague to Build Engines with 3D Printed Parts | All3DP

Show Only

Looking for tag: aviation