"Animal Avengers" give fire-damaged tortoise a second chance at life with specially designed and hand-painted 3D Printed Tortoise Shell.

"Freddy" Receives Hand-Painted 3D Printed Tortoise Shell | All3DP

Brazilian “Animal Avengers” save Labrador retriever puppy, Hanna, by giving her a 3D printed tooth in the first procedure of its kind.

Cute Labrador Puppy Gets New 3D Printed Tooth | All3DP

The Animal Avengers have fitted puppy, Zeus, with a 3D printed "ballet shoe" to help him walk properly after his foot was chewed off.

Animal Avengers 3D Print Prosthetic for Zeus the Whippet Puppy | All3DP

The Animal Avengers continue in their mission to preserve wildlife; Victoria the goose has a 3D printed beak so she can eat and drink again.

Animal Avengers Use 3D Printing to Save Victoria the Goose | All3DP

Looking forward to the release of Avengers: Infinity Wars? Why not become the most powerful villain in the Marvel universe with your own 3D printed Infinity Gauntlet. 

[Project] Wield the Power of the Infinity Gauntlet from New 'Avengers' Film | All3DP

Looking forward to the release of Avengers: Infinity Wars? Why not 3D print a fully functional Ironman helmet. This wearable looks like it came straight out of the big screen, equipped with light up eyes and a retractable face plate.  

[Project] Prepare for 'Avengers: Infinity Wars' with this 3D Printed Ironman Helmet | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><a rel="nofollow" href="https://www.youtube.com/iczfirz?sub_confirmation=1">Subscribe Now!</a> 
Very good model from basti_vapes. Remix to no support free and printed. 
Time-lapse print video : <a rel="nofollow" href="https://youtu.be/MKl_LkOERvs">https://youtu.be/MKl_LkOERvs</a> <a rel="nofollow" href="https://youtu.be/MKl_LkOERvs"><img src="https://cdn.thingiverse.com/assets/19/d4/f3/e9/b6/featured_preview_EP032CoverYT.jpg" alt="image"></a>
Subscribe to find out more support free 4K Time-lapse video: <a rel="nofollow" href="https://www.youtube.com/iczfirz?sub_confirmation=1">Subscribe Now!</a><a rel="nofollow" href="http://www.youtube.com/iczfirz">http://www.youtube.com/iczfirz</a>
 <a rel="nofollow" href="https://youtu.be/lwuSK4M_dRs">https://youtu.be/lwuSK4M_dRs</a> <a rel="nofollow" href="https://youtu.be/lwuSK4M_dRs"><img src="https://cdn.thingiverse.com/assets/2b/4b/5c/68/cf/EP036Cover.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/5WOnIP-qwVk">https://youtu.be/5WOnIP-qwVk</a> <a rel="nofollow" href="https://youtu.be/5WOnIP-qwVk"><img src="https://cdn.thingiverse.com/assets/4d/06/36/b2/59/EP029CoverT.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/RLnsV9CKTNU">https://youtu.be/RLnsV9CKTNU</a> <a rel="nofollow" href="https://youtu.be/RLnsV9CKTNU"><img src="https://cdn.thingiverse.com/assets/b1/8c/be/08/c3/EP028CoverT.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/9w7k7XRm34Q">https://youtu.be/9w7k7XRm34Q</a> <a rel="nofollow" href="https://youtu.be/9w7k7XRm34Q"><img src="https://cdn.thingiverse.com/assets/62/13/77/9b/b9/EP026CoverT.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/uxLFw1A8tTA">https://youtu.be/uxLFw1A8tTA</a> <a rel="nofollow" href="https://youtu.be/uxLFw1A8tTA"><img src="https://cdn.thingiverse.com/assets/54/90/a7/c3/c5/large_display_EP012CoverT.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/F1pj7ACaZ70">https://youtu.be/F1pj7ACaZ70</a> <a rel="nofollow" href="https://youtu.be/F1pj7ACaZ70"><img src="https://cdn.thingiverse.com/assets/db/41/d4/46/f9/large_display_EP011CoverT.jpg" alt="image"></a> <a rel="nofollow" href="https://youtu.be/tbOhFjlpp0c">https://youtu.be/tbOhFjlpp0c</a> <a rel="nofollow" href="https://youtu.be/tbOhFjlpp0c"><img src="https://cdn.thingiverse.com/assets/61/76/47/e1/e2/large_display_EP014CoverT.jpg" alt="image"></a> </div>
</body></html>

Doctor Strange Bust Support Free

<a href='https://www.youtube.com/iczfirz?sub_confirmation=1'><H1>Subscribe Now!</H1></a>
Very good model from basti_vapes. Remix to no support free and printed. 

Time-lapse print video : https://youtu.be/MKl_LkOERvs
<a href="https://youtu.be/MKl_LkOERvs"><img src="https://cdn.thingiverse.com/assets/19/d4/f3/e9/b6/featured_preview_EP032CoverYT.jpg"/></a>


 

Subscribe to find out more support free 4K Time-lapse video:
<a href='https://www.youtube.com/iczfirz?sub_confirmation=1'><H1>Subscribe Now!</H1></a>http://www.youtube.com/iczfirz


 
https://youtu.be/lwuSK4M_dRs
<a href="https://youtu.be/lwuSK4M_dRs"><img src="https://cdn.thingiverse.com/assets/2b/4b/5c/68/cf/EP036Cover.jpg"/></a>
https://youtu.be/5WOnIP-qwVk
<a href="https://youtu.be/5WOnIP-qwVk"><img src="https://cdn.thingiverse.com/assets/4d/06/36/b2/59/EP029CoverT.jpg"/></a>
https://youtu.be/RLnsV9CKTNU
<a href="https://youtu.be/RLnsV9CKTNU"><img src="https://cdn.thingiverse.com/assets/b1/8c/be/08/c3/EP028CoverT.jpg"/></a>
https://youtu.be/9w7k7XRm34Q
<a href="https://youtu.be/9w7k7XRm34Q"><img src="https://cdn.thingiverse.com/assets/62/13/77/9b/b9/EP026CoverT.jpg"/></a>
https://youtu.be/uxLFw1A8tTA
<a href="https://youtu.be/uxLFw1A8tTA"><img src="https://cdn.thingiverse.com/assets/54/90/a7/c3/c5/large_display_EP012CoverT.jpg"/></a>
https://youtu.be/F1pj7ACaZ70
<a href="https://youtu.be/F1pj7ACaZ70"><img src="https://cdn.thingiverse.com/assets/db/41/d4/46/f9/large_display_EP011CoverT.jpg"/></a>
https://youtu.be/tbOhFjlpp0c
<a href="https://youtu.be/tbOhFjlpp0c"><img src="https://cdn.thingiverse.com/assets/61/76/47/e1/e2/large_display_EP014CoverT.jpg"/></a>

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div>It&apos;s a very electrical bookmark :)))</div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
Printer Brand: 
 <div>Creality</div>
 
 Printer: 
 <div>Ender 3 Pro</div>
 
 Rafts: 
 <div>No</div>
 
 Supports: 
 <div>Yes</div>
 
 Resolution: 
 <div>0,12</div>
 
 Infill: 
 <div>100%</div>
 
 Filament: 
 <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ABG+PLA&amp;tag=tv-auto-20" target="_blank">
 ABG PLA </a>

 White
 
 Notes: 
 <div>50 mm/s 
Nozzle 200 &#xB0;C 
Bed 63 &#xB0;C</div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<img src="https://cdn.thingiverse.com/assets/64/89/8c/21/a4/5.jpg">
 <img src="https://cdn.thingiverse.com/assets/29/97/39/dc/3b/6.jpg">
 <img src="https://cdn.thingiverse.com/assets/b5/c7/37/e1/30/7.jpg">
 <img src="https://cdn.thingiverse.com/assets/e0/6f/46/c2/96/3.png">
</body></html>

Thor Bookmark

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div>Remixed on Tinkercad.
Good Job borntobeathug!!
&#xBF;Looking for similar designs? 
Look at this:
<a rel="nofollow" href="/madsoul666/designs">https://www.thingiverse.com/madsoul666/designs</a>
I&apos;ll be happy to see your Make!!
ENJOY!!</div>
</body></html>

Playmobil Iron Man

Remixed on Tinkercad.

Good Job borntobeathug!!

¿Looking for similar designs?
Look at this:

https://www.thingiverse.com/madsoul666/designs

I'll be happy to see your Make!!

ENJOY!!

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div>It&apos;s a very angry bookmark :)))</div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
Printer Brand: 
 <div>Creality</div>
 
 Printer: 
 <div>Ender 3 Pro</div>
 
 Rafts: 
 <div>No</div>
 
 Supports: 
 <div>Yes</div>
 
 Resolution: 
 <div>0,12</div>
 
 Infill: 
 <div>100%</div>
 
 Filament: 
 <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ABG+PLA&amp;tag=tv-auto-20" target="_blank">
 ABG PLA </a>

 White
 
 Notes: 
 <div>50 mm/s Nozzle 200 &#xB0;C Bed 63 &#xB0;C</div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<img src="https://cdn.thingiverse.com/assets/ff/da/d1/ad/7a/3.jpg">
 <img src="https://cdn.thingiverse.com/assets/74/28/93/8b/40/2.jpg">
 <img src="https://cdn.thingiverse.com/assets/c0/17/0c/e2/27/gif.gif">
 <img src="https://cdn.thingiverse.com/assets/dc/be/df/33/8f/4.png">
</body></html>

Hulk Bookmark

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div>It&apos;s a very strong bookmark :))))</div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
Printer Brand: 
 <div>Creality</div>
 
 Printer: 
 <div>Ender 3 Pro</div>
 
 Rafts: 
 <div>No</div>
 
 Supports: 
 <div>Yes</div>
 
 Resolution: 
 <div>0,12</div>
 
 Infill: 
 <div>100%</div>
 
 Filament: 
 <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ABG+PLA&amp;tag=tv-auto-20" target="_blank">
 ABG PLA </a>

 White
 
 Notes: 
 <div>50 mm/s
Nozzle 200 &#xB0;C 
Bed 63 &#xB0;C</div>
<h3 class="thing-component-header tips post-printing">Post-Printing</h3>
<img src="https://cdn.thingiverse.com/assets/a8/cb/a9/ae/ce/IMG_20201024_125522.jpg">
 <img src="https://cdn.thingiverse.com/assets/99/b6/0d/e3/ee/IMG_20201024_125421.jpg">
 <img src="https://cdn.thingiverse.com/assets/47/bc/e5/2a/cc/IMG_20201024_125535.jpg">
 <img src="https://cdn.thingiverse.com/assets/98/37/a9/e1/0a/gif.gif">
 <img src="https://cdn.thingiverse.com/assets/0b/d2/78/a6/a9/4.png">
 <img src="https://cdn.thingiverse.com/assets/71/61/09/dd/d5/5.jpg">
</body></html>

Captain America Bookmark

Please watch this video for more information and to see it in action: <iframe width="593" height="370" src="//www.youtube.com/embed/D6DdESIhi4c" frameborder="0" allowfullscreen></iframe>

 Welcome all who are worthy! (Okay I promise that&apos;s the only worthy joke I&apos;ll make here. There&apos;s more in the video though.) :)

 This is a fully 3D printed Mjolnir. I made it life size. I&apos;m sure it&apos;s not the exact dimensions of the movie prop but it&apos;s close. It can also be scaled pretty easily. This version of Thor&apos;s Hammer is specifically from The Dark World movie. I&apos;ll provide the steps for post processing in a lot of detail below, but if you want a higher level look at it, watch the video. 
 &#xA0;I provided two different options for the main part of the hammer. It prints in 2 sections, and they are identical so just print 2 of them. There is a hollow one if you&apos;re looking to save a bit of filament (this is the option I took). But I also provided a solid one that will print in a better orientation if you&apos;re able to spare the extra filament. The solid option will also provide more weight which could add to the realism of it. 
 &#xA0;I hope you enjoy printing this! :)

 Print Settings: 
 Rafts: No 
 Support: Minimal 
 Resolution 0.3mm 
 Infill: 20%

 All of these settings are more or less flexible. The only supports you&apos;ll need are for the little slot on the bottom of the bigger portion of it. But they aren&apos;t strictly necessary. I didn&apos;t use any supports while printing, I just had to do some clean up. I printed at 0.3mm layer height but you could increase that for better details. I was just trying to save some filament. And infill doesn&apos;t matter too much here.

 Post-Processing: 
 Step 0: Print all the parts.

 Step 1: Sand the parts down as much as possible. The details on the handle and the outside of the hammer can be pretty hard to get smooth, but do your best. The sides of the hammer should be completely smooth to the touch though. Start with a coarse grit sandpaper in the ballpark of 100 grit. Then move up to 400 or above to get the best results.

 Step 2: Glue the parts together. Use the printed pins to hold the parts in place, then apply glue to those pins to adhere them together. I used a Gorilla Glue Two Part Epoxy, glued the parts and held them for a bit until they dried. Then once the parts are together, take a paint brush or something similar to apply the epoxy generously over any cracks or seams you want to cover. Then once the glue has dried completely, sand the areas over seams to get those smoothed down as well. 
 &#xA0;Step 3: Prime the hammer. We chose to use a black spray primer from Krylon. Coat the hammer at least twice, letting it dry completely in between coats. Just lightly spray across the surface using a normal spray painting technique. Don&apos;t stress too much about the detailed areas at this point.

 Step 4: Painting the hammer. We used a Hammered Metal spray paint. Specifically silver colored. Apply 3 coats of this, letting it dry completely in between. If needed, you can sand any rough areas in between coats. Just use your judgement on what looks best. The paint should fully cover the hammer.

 Step 5: Paint the handle. For this you&apos;ll need a paint brush and some brown acrylic paint. Paint the brown on the lower areas of the handle, leaving the silver rings and base of the handle as is. Make use of multiple brushes to get into hard to reach areas. Apply 3 coats of this to get a smooth, but plentiful coverage of paint. You can always go back over the details on the handle with silver paint if you need to.

 Step 6: Apply a wash. I won&apos;t go into a ton of detail about the wash. You can YouTube &quot;applying a wash to miniatures&quot; if you want more details. We took some silver and black acrylic paint, mix it and watered it down significantly then applied it to the details on the handle and on the sides of the hammer. Use a paper towel or spare paint brush to dab off excess. This will give the recessed areas a more defined shadow.

 Step 7: Rough it up. This step involves taking sand paper to the paint on the bulk of the hammer to give it a worn and used look. Go around the edges and just lightly sand it to give it a more textured look. Then take some of your paper towels you used to clean off the wash and lightly dust that darker color across the body for even more texture.

 Step 8: Apply a finish coat. You can get some spray clear coat and just spray the whole thing once it&apos;s completely dry and done. This will help protect it from damage like scratches to the paint.

Life Size Thor's Hammer (Mjolnir)

Please watch this video for more information and to see it in action: 

Welcome all who are worthy! (Okay I promise that's the only worthy joke I'll make here. There's more in the video though.) :)

This is a fully 3D printed Mjolnir. I made it life size. I'm sure it's not the exact dimensions of the movie prop but it's close. It can also be scaled pretty easily. This version of Thor's Hammer is specifically from The Dark World movie. I'll provide the steps for post processing in a lot of detail below, but if you want a higher level look at it, watch the video.
 I provided two different options for the main part of the hammer. It prints in 2 sections, and they are identical so just print 2 of them. There is a hollow one if you're looking to save a bit of filament (this is the option I took). But I also provided a solid one that will print in a better orientation if you're able to spare the extra filament. The solid option will also provide more weight which could add to the realism of it.
 I hope you enjoy printing this! :)

Print Settings:
Rafts: No
Support: Minimal
Resolution 0.3mm
Infill: 20%

All of these settings are more or less flexible. The only supports you'll need are for the little slot on the bottom of the bigger portion of it. But they aren't strictly necessary. I didn't use any supports while printing, I just had to do some clean up. I printed at 0.3mm layer height but you could increase that for better details. I was just trying to save some filament. And infill doesn't matter too much here.

Post-Processing:
Step 0: Print all the parts.

Step 1: Sand the parts down as much as possible. The details on the handle and the outside of the hammer can be pretty hard to get smooth, but do your best. The sides of the hammer should be completely smooth to the touch though. Start with a coarse grit sandpaper in the ballpark of 100 grit. Then move up to 400 or above to get the best results.

Step 2: Glue the parts together. Use the printed pins to hold the parts in place, then apply glue to those pins to adhere them together. I used a Gorilla Glue Two Part Epoxy, glued the parts and held them for a bit until they dried. Then once the parts are together, take a paint brush or something similar to apply the epoxy generously over any cracks or seams you want to cover. Then once the glue has dried completely, sand the areas over seams to get those smoothed down as well.
 Step 3: Prime the hammer. We chose to use a black spray primer from Krylon. Coat the hammer at least twice, letting it dry completely in between coats. Just lightly spray across the surface using a normal spray painting technique. Don't stress too much about the detailed areas at this point.

Step 4: Painting the hammer. We used a Hammered Metal spray paint. Specifically silver colored. Apply 3 coats of this, letting it dry completely in between. If needed, you can sand any rough areas in between coats. Just use your judgement on what looks best. The paint should fully cover the hammer.

Step 5: Paint the handle. For this you'll need a paint brush and some brown acrylic paint. Paint the brown on the lower areas of the handle, leaving the silver rings and base of the handle as is. Make use of multiple brushes to get into hard to reach areas. Apply 3 coats of this to get a smooth, but plentiful coverage of paint. You can always go back over the details on the handle with silver paint if you need to.

Step 6: Apply a wash. I won't go into a ton of detail about the wash. You can YouTube "applying a wash to miniatures" if you want more details. We took some silver and black acrylic paint, mix it and watered it down significantly then applied it to the details on the handle and on the sides of the hammer. Use a paper towel or spare paint brush to dab off excess. This will give the recessed areas a more defined shadow.

Step 7: Rough it up. This step involves taking sand paper to the paint on the bulk of the hammer to give it a worn and used look. Go around the edges and just lightly sand it to give it a more textured look. Then take some of your paper towels you used to clean off the wash and lightly dust that darker color across the body for even more texture.

Step 8: Apply a finish coat. You can get some spray clear coat and just spray the whole thing once it's completely dry and done. This will help protect it from damage like scratches to the paint.


Here&apos;s a video of it in action...<iframe width="593" height="370" src="//www.youtube.com/embed/ruN1YD_Vq4M" frameborder="0" allowfullscreen></iframe>This is a extruded LED IronMan I printed on my dual extruder... I took a JPEG of the IronMan and traced it in Solidworks... I then extruded and filleted the IronMan and saved it as its own STL to be used in dual extrusion... I then designed a plate around the IronMan, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and IronMan, the shell has aligned screw holes so it can be fastened to the plate...I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the IronMan... I used Bendlay because it is extremely translucent (91% of light passes through)...I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...I&apos;ve also made the following logo&apos;s, designs for LED hookup... Bendlay Link: <a href="http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&amp;qid=1435347958&amp;sr=8-1&amp;keywords=bendlay&amp;pebp=1435347954416&amp;perid=1WG2SRVP9TGP9WAM748W" rel="external">http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&amp;qid=1435347958&amp;sr=8-1&amp;keywords=bendlay&amp;pebp=1435347954416&amp;perid=1WG2SRVP9TGP9WAM748W</a> Here&apos;s some links to other LED logos I made like this one...Batman -&#xA0;<a href="https://www.youmagine.com/designs/batman-led-light-nightlight" rel="external">https://www.youmagine.com/designs/batman-led-light-nightlight</a>Superman -&#xA0;<a href="https://www.youmagine.com/designs/superman-led-light-nightlight" rel="external">https://www.youmagine.com/designs/superman-led-light-nightlight</a>IronMan -&#xA0;<a href="https://www.youmagine.com/designs/ironman-led-light-nighlight" rel="external">https://www.youmagine.com/designs/ironman-led-light-nighlight</a>SpiderMan -&#xA0;<a href="https://www.youmagine.com/designs/spiderman-led-light-nightlight" rel="external">https://www.youmagine.com/designs/spiderman-led-light-nightlight</a>Punisher -&#xA0;<a href="https://www.youmagine.com/designs/punisher-led-light-nightlight" rel="external">https://www.youmagine.com/designs/punisher-led-light-nightlight</a>Storm Trooper -&#xA0;<a href="https://www.youmagine.com/designs/stormtrooper-led-light-nightlight" rel="external">https://www.youmagine.com/designs/stormtrooper-led-light-nightlight</a>Transformers Autobot -&#xA0;<a href="https://www.youmagine.com/designs/autobot-transformers-led-nightlight-lamp" rel="external">https://www.youmagine.com/designs/autobot-transformers-led-nightlight-lamp</a>Transformers Decepticon -&#xA0;<a href="https://www.youmagine.com/designs/decepticon-transformers-led-nightlight-lamp" rel="external">https://www.youmagine.com/designs/decepticon-transformers-led-nightlight-lamp</a>MakerFaire Robot -&#xA0;<a href="https://www.youmagine.com/designs/maker-faire-led-robot-sign-nightlight" rel="external">https://www.youmagine.com/designs/maker-faire-led-robot-sign-nightlight</a>Android Robot -&#xA0;<a href="https://www.youmagine.com/designs/android-robot-led-nightlight-lamp" rel="external">https://www.youmagine.com/designs/android-robot-led-nightlight-lamp</a>Apple Logo -&#xA0;<a href="https://www.youmagine.com/designs/apple-logo-led-nightlight-lamp" rel="external">https://www.youmagine.com/designs/apple-logo-led-nightlight-lamp</a>Mortal Kombat -&#xA0;<a href="https://www.youmagine.com/designs/mortal-kombat-led-light-nightlight" rel="external">https://www.youmagine.com/designs/mortal-kombat-led-light-nightlight</a>Jeep Logo -&#xA0;<a href="https://www.youmagine.com/designs/jeep-emblem-led-light-nightlight" rel="external">https://www.youmagine.com/designs/jeep-emblem-led-light-nightlight</a>

IRONMAN LED Light/Nighlight

Here's a video of it in action...This is a extruded LED IronMan I printed on my dual extruder... I took a JPEG of the IronMan and traced it in Solidworks... I then extruded and filleted the IronMan and saved it as its own STL to be used in dual extrusion... I then designed a plate around the IronMan, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and IronMan, the shell has aligned screw holes so it can be fastened to the plate...I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the IronMan... I used Bendlay because it is extremely translucent (91% of light passes through)...I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...I've also made the following logo's, designs for LED hookup...Bendlay Link:http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&qid=1435347958&sr=8-1&keywords=bendlay&pebp=1435347954416&perid=1WG2SRVP9TGP9WAM748WHere's some links to other LED logos I made like this one...Batman - https://www.youmagine.com/designs/batman-led-light-nightlightSuperman - https://www.youmagine.com/designs/superman-led-light-nightlightIronMan - https://www.youmagine.com/designs/ironman-led-light-nighlightSpiderMan - https://www.youmagine.com/designs/spiderman-led-light-nightlightPunisher - https://www.youmagine.com/designs/punisher-led-light-nightlightStorm Trooper - https://www.youmagine.com/designs/stormtrooper-led-light-nightlightTransformers Autobot - https://www.youmagine.com/designs/autobot-transformers-led-nightlight-lampTransformers Decepticon - https://www.youmagine.com/designs/decepticon-transformers-led-nightlight-lampMakerFaire Robot - https://www.youmagine.com/designs/maker-faire-led-robot-sign-nightlightAndroid Robot - https://www.youmagine.com/designs/android-robot-led-nightlight-lampApple Logo - https://www.youmagine.com/designs/apple-logo-led-nightlight-lampMortal Kombat - https://www.youmagine.com/designs/mortal-kombat-led-light-nightlightJeep Logo - https://www.youmagine.com/designs/jeep-emblem-led-light-nightlight


<html><head></head><body><div class="short-text text-auto-link ">
 &#x2714; For more sculpts like this, <a href="https://www.patreon.com/eastman">take a look at my Patreon</a>.
The Amazing-Spider Man. Tadaa!
Some more super hero fan art, yay :) I&apos;ve had this guy sculpted for maybe a month now, but honestly I&apos;ve been too busy using my spare time to play video games to publish anything new (I had to finish God of War, and, well... then there was the Marvel&apos;s Spider-Man game, and now Assassin&apos;s Creed Odyssey...)
Anyways. Enjoy! Any questions, drop a comment or hit me up in a PM (which I know I&apos;ve been lousy answering lately).
About the design
It was digitally sculpted in ZBrush as usual, using no fancy brushes or anything, 95% Dam Standard and Clay Buildup, and a lot of smoothing.
As you can tell around the shoulders this Spidey is inspired by the design in the game Marvel&apos;s Spider-Man, but not an exact copy. I kept the eyes more low-tech- and the web pattern is a bit different. I did struggle a lot with the spider logo on his chest, and I&apos;m&#xA0;still not happy with it 100%.
The base. It&apos;s more advanced than I usually make them, but I wanted to give detailing it a bit more a try this time around. I normally dislike bases that are&#xA0;too detailed and complicated because I think it detracts from the main subject. It was fun, though, and I hope you guys like it :)
About printing this guy
He&#xA0;should only need <a href="https://i.imgur.com/XHRj3kQ.png">supports under his chin,</a>&#xA0;but if your printer lacks a part cooling fan you might want to add some others. If someone&#xA0;really wants a version without the rebar in the concrete, let me know.
This is fan art, provided for free, and I fully acknowledge the Spider-Man likeness is the property of Marvel Entertainment, LLC (The Walt Disney Company).
										</div>
										
 								</body></html>

Spider-Man bust

 ✔ For more sculpts like this, take a look at my Patreon. The Amazing-Spider Man. Tadaa! Some more super hero fan art, yay :) I've had this guy sculpted for maybe a month now, but honestly I've been too busy using my spare time to play video games to publish anything new (I had to finish God of War, and, well... then there was the Marvel's Spider-Man game, and now Assassin's Creed Odyssey...) Anyways. Enjoy! Any questions, drop a comment or hit me up in a PM (which I know I've been lousy answering lately). About the design It was digitally sculpted in ZBrush as usual, using no fancy brushes or anything, 95% Dam Standard and Clay Buildup, and a lot of smoothing. As you can tell around the shoulders this Spidey is inspired by the design in the game Marvel's Spider-Man, but not an exact copy. I kept the eyes more low-tech- and the web pattern is a bit different. I did struggle a lot with the spider logo on his chest, and I'm still not happy with it 100%. The base. It's more advanced than I usually make them, but I wanted to give detailing it a bit more a try this time around. I normally dislike bases that are too detailed and complicated because I think it detracts from the main subject. It was fun, though, and I hope you guys like it :) About printing this guy He should only need supports under his chin, but if your printer lacks a part cooling fan you might want to add some others. If someone really wants a version without the rebar in the concrete, let me know. This is fan art, provided for free, and I fully acknowledge the Spider-Man likeness is the property of Marvel Entertainment, LLC (The Walt Disney Company). 

<html><head></head><body><div class="short-text text-auto-link ">
 <a href="https://www.patreon.com/bePatron?u=6563165" data-patreon-widget-type="become-patron-button">Become a Patron!</a>
&#xA0;
Follow Us on <a href="https://www.facebook.com/groups/printedobsession/">Facebook</a> for the latest info and a chance to vote what i sculpt next...
see my shop here on <a href="https://www.etsy.com/uk/shop/AJewellersTale">etsy</a>
&quot;... I am Ironman&quot;
-Tony Stark
										</div>
										
 								</body></html>

IRONMAN MK42 - Super Hero Landing Pose - 20 CM base

 Become a Patron! Follow Us on Facebook for the latest info and a chance to vote what i sculpt next... see my shop here on etsy "... I am Ironman" -Tony Stark 

In honor of the release of Avengers Infinity War, here is a special Avengers Logo where the letters are mounted on a gear train. The gear train allows the letters to spin in a synchronized manner, allowing for a dramatic reveal of the logo.

Here is a video with more details and some humor about Hawkeye, if you are interested: 
<iframe width="593" height="370" src="//www.youtube.com/embed/2P8kA0pKA5E" frameborder="0" allowfullscreen></iframe>

Please note that the best way to show your appreciation and keep up to date on my latest 3D printing projects is to head over to my YouTube channel and subscribe! 
<a href="https://www.youtube.com/channel/UCeQR9E-MPwBqEpuaIJiE4CQ" rel="external">https://www.youtube.com/channel/UCeQR9E-MPwBqEpuaIJiE4CQ</a>

STL quantities to print:

A, Avengers Logo {QTY 1x} 
V, Avengers Logo {QTY 1x} 
E1, Avengers Logo {QTY 1x} 
N, Avengers Logo {QTY 1x} 
G, Avengers Logo {QTY 1x} 
E2, Avengers Logo {QTY 1x} 
R, Avengers Logo {QTY 1x} 
S, Avengers Logo {QTY 1x}

Base-left, Avengers Logo {QTY 1x} 
Base-middle, Avengers Logo {QTY 1x} 
Base-right, Avengers Logo {QTY 1x} 
Mounting Shaft, Avengers Logo {QTY 8x}

Avengers Rotating Logo

In honor of the release of Avengers Infinity War, here is a special Avengers Logo where the letters are mounted on a gear train.  The gear train allows the letters to spin in a synchronized manner, allowing for a dramatic reveal of the logo.

Here is a video with more details and some humor about Hawkeye, if you are interested:


Please note that the best way to show your appreciation and keep up to date on my latest 3D printing projects is to head over to my YouTube channel and subscribe!
https://www.youtube.com/channel/UCeQR9E-MPwBqEpuaIJiE4CQ

STL quantities to print:

A, Avengers Logo {QTY 1x}
V, Avengers Logo {QTY 1x}
E1, Avengers Logo {QTY 1x}
N, Avengers Logo {QTY 1x}
G, Avengers Logo {QTY 1x}
E2, Avengers Logo {QTY 1x}
R, Avengers Logo {QTY 1x}
S, Avengers Logo {QTY 1x}

Base-left, Avengers Logo {QTY 1x}
Base-middle, Avengers Logo {QTY 1x}
Base-right, Avengers Logo {QTY 1x}
Mounting Shaft, Avengers Logo {QTY 8x}


avengers lamp



iluminación comprar aquí:
https://s.click.aliexpress.com/e/_d8aOTpZ

IMPRESORAS 3D RECOMENDADAS

COMPRAR ARTILLERY SIDEWINDER X1
https://s.click.aliexpress.com/e/_d9BleuI
COMPRAR ENDER 3 PRO
https://s.click.aliexpress.com/e/_dYo6NFu
COMPRAR ANYCUBIC MEGA ZERO
https://s.click.aliexpress.com/e/_dWJ2vsi
COMPRAR ARTILLERY GENIUS
https://s.click.aliexpress.com/e/_dZPDarG
COMPRAR PRUSA MINI CLONE
https://s.click.aliexpress.com/e/_dTEE2L4
COMPRAR PRUSA MK3S CLONE
https://s.click.aliexpress.com/e/_dT44w4I
COMPRAR  TWO TREES


avengers2 lamp



iluminación comprar aquí:
https://s.click.aliexpress.com/e/_d8aOTpZ

IMPRESORAS 3D RECOMENDADAS

COMPRAR ARTILLERY SIDEWINDER X1
https://s.click.aliexpress.com/e/_d9BleuI
COMPRAR ENDER 3 PRO
https://s.click.aliexpress.com/e/_dYo6NFu
COMPRAR ANYCUBIC MEGA ZERO
https://s.click.aliexpress.com/e/_dWJ2vsi
COMPRAR ARTILLERY GENIUS
https://s.click.aliexpress.com/e/_dZPDarG
COMPRAR PRUSA MINI CLONE
https://s.click.aliexpress.com/e/_dTEE2L4
COMPRAR PRUSA MK3S CLONE
https://s.click.aliexpress.com/e/_dT44w4I
COMPRAR  TWO TREES
https://s.click.aliexpress.com/e/_dXXMzqQ


Thingscanner

Some articles you might like