Our love and fascination of animals shows in many ways, and now, 3D printing is one of them. Check out these awesome 3D printed animals!

3D Printed Animals: 15 Great Models for Your Menagerie | All3DP

The CAP Project are using 3D printing and coming to the rescue of animals in need with 3D printed prosthetics.

The CAP Project uses 3D Printing to Help Pets in Need | All3DP

What does 3D printing have to do with endangered wildlife? Three IFAW images tell a compelling story, and help raise awareness in the process.

IFAW Awareness Campaign 3D Prints Endangered Animals | All3DP

3D printed prosthetics don't just help out humans. Here is a list of ten animals who have been aided by the technology too!

11 Animals Helped Out by 3D Printed Prostheses | All3DP

Researching diseases, new drugs, and cosmetics without testing on animals is now possible thanks to a new 3D printed heart-on-a-chip device.

Harvard Researchers 3D Print Heart-on-a-Chip | All3DP

Marzipan from Luebeck adheres to strict rules on the amount of almond paste in the product. But, 3D printing is livening up the scene.

3D Printing Marzipan Animals and Fruit in Germany's Luebeck | All3DP

We've seen 3D printed carts, wagons and crutches for disabled animals, but now prosthetics are being developed to further the help we can give to these pets in need!

Vincent the Cat Can Walk Thanks to 3D Printing | All3DP

Dieter Pfaff is a specialist among specialists. The animal orthopedist helps pets to lead a normal life again.

3D printed prosthetics for animals: Not as common as you think | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Trex stencil</p></div>
</body></html>

Trex stencil 2

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This started off me remixing the Dog to make for my sister, then my mom seen it and said &quot;I want a bear&quot;, so a bear was made also.  </p>
<p>Cant figure out how to get crappyverse to show everything I remixed these from, so here they are:<br><a rel="nofollow" href="/thing:3101425">https://www.thingiverse.com/thing:3101425</a><br><a rel="nofollow" href="/thing:2409917">https://www.thingiverse.com/thing:2409917</a><br><a rel="nofollow" href="/thing:2847707">https://www.thingiverse.com/thing:2847707</a></p>
<p>The parts should be interchangeable with the original dog, I just wanted to give it a tail, make it a little less low poly, and try and make it a bit easier to print.  </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=noname+all+pla+is+the+same+PLA&amp;tag=tv-auto-20" target="_blank">
                        noname all pla is the same PLA                    </a>

                    White
</body></html>

Wine animals

This started off me remixing the Dog to make for my sister, then my mom seen it and said "I want a bear", so a bear was made also.  

Cant figure out how to get crappyverse to show everything I remixed these from, so here they are:
https://www.thingiverse.com/thing:3101425
https://www.thingiverse.com/thing:2409917
https://www.thingiverse.com/thing:2847707

The parts should be interchangeable with the original dog, I just wanted to give it a tail, make it a little less low poly, and try and make it a bit easier to print.  

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.</p></div>
</body></html>

Camaleon Fumeta 

Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Cute elephant design, sculpted in Blender</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20% +</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SUNLU+PLA&amp;tag=tv-auto-20" target="_blank">
                        SUNLU PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used supports for the trunk.<br>
Might have to use a brim to help the thin supports.</p></div>
</body></html>

Cute Elephant

Cute elephant design, sculpted in Blender

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Quick simple minecraft snowman.</p></div>
</body></html>

Minecraft snowman

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p><em>Deutsch unterhalb</em></p>
<p>I designed this inhalation adapter for a colleague&apos;s horse, so I can only describe the exact medical situation to a limited extent. In short: the horse suffers from COPD and has to inhale. A conventional inhaler costs a lot of money. That&apos;s why a &quot;Pari Boy&quot; <em>(no advertising)</em>, a horse mask and the adapter were used here. Works great and the horse is in excellent health.</p>
<p>Ich habe diesen Inhalationsdapter f&#xFC;r das Pferd eines Kollegen konstruiert, deshalb kann ich auch nur begrenzt die genaue medizinische Situation wiedergeben. Kurz: Das Pferd leidet unter COPD und muss Inhalieren. Ein konventioneller Inhalator kostet viel Geld. Deswegen wurde hier ein &quot;Pari Boy&quot; <em>(Keine Werbung)</em> , eine Pferdemaske und der Adapter verwendet. Funktioniert super und das Pferd erfreut sich bester Gesundheit.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Anycubic i3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>30%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=extrudr+PET-G&amp;tag=tv-auto-20" target="_blank">
                        extrudr PET-G                    </a>

                    blue
</body></html>

Inhalation adapter for horses

*Deutsch unterhalb*

I designed this inhalation adapter for a colleague's horse, so I can only describe the exact medical situation to a limited extent. In short: the horse suffers from COPD and has to inhale. A conventional inhaler costs a lot of money. That's why a "Pari Boy" *(no advertising)*, a horse mask and the adapter were used here. Works great and the horse is in excellent health.

Ich habe diesen Inhalationsdapter für das Pferd eines Kollegen konstruiert, deshalb kann ich auch nur begrenzt die genaue medizinische Situation wiedergeben. Kurz: Das Pferd leidet unter COPD und muss Inhalieren. Ein konventioneller Inhalator kostet viel Geld. Deswegen wurde hier ein "Pari Boy" *(Keine Werbung)* , eine Pferdemaske und der Adapter verwendet. Funktioniert super und das Pferd erfreut sich bester Gesundheit.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>While working from home, did a lot of work outside this summer. It was fun to leave seed out for the birds and mammals, but the chipmunks would burn through the seed pretty quickly. This dispenser took them a little while to figure out. </p>
<h3>Construction:</h3>
<p>It was printed in PLA with 0.2 mm layer height. </p>
<p>The barrel is mounted on a section of rod. I used the 7ish mm fiberglass rod that is typically used to make our your driveway for snow plows. Standard roller skate bearings make it easy to turn, but are probably overkill. The stand and the ring have recesses to accommodate M3 nuts and bolts to use as lock screws. </p>
<p>Screwing it down to a board is a good idea. The squirrels can be pretty rough with it, and managed to break the first version of the stand. </p>
<p>You can see some of the design and assemply process and video of it in use <a rel="nofollow" href="https://youtu.be/vPo1p72szrk">here</a></p>
<h3>Notes</h3>
<p>It probably could be less generous. They can still clean it out pretty quickly. Further tweaking is in the works to make it dispense less with each push and have a larger capacity. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">i3 MK3</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Generic+PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        Generic PLA PLA                    </a>

                    Clear and Brown
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Infill of the barrel is 10%, but the stand should be at least 25% to give it some strength. </p></div>
</body></html>

Chipmunk and Squirrel Brain Teaser

While working from home, did a lot of work outside this summer. It was fun to leave seed out for the birds and mammals, but the chipmunks would burn through the seed pretty quickly. This dispenser took them a little while to figure out. 

### Construction:

It was printed in PLA with 0.2 mm layer height. 

The barrel is mounted on a section of rod. I used the 7ish mm fiberglass rod that is typically used to make our your driveway for snow plows. Standard roller skate bearings make it easy to turn, but are probably overkill. The stand and the ring have recesses to accommodate M3 nuts and bolts to use as lock screws. 

Screwing it down to a board is a good idea. The squirrels can be pretty rough with it, and managed to break the first version of the stand. 
 
You can see some of the design and assemply process and video of it in use [here](https://youtu.be/vPo1p72szrk)

### Notes
It probably could be less generous. They can still clean it out pretty quickly. Further tweaking is in the works to make it dispense less with each push and have a larger capacity. 


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Hello,<br>
my first upload and my first blender to print creation.<br>
A simple lowpoly deer.<br>
Prints without support - the hole for the nail could be more polished - but it works!</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anycubic</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>All-metal Mega</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Any+PLA+PLA&amp;tag=tv-auto-20" target="_blank">
                        Any PLA PLA                    </a>

                    Any Color
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Standard settings are ok - maybe an other angle would help for the antler.<br>
The bigger you print - the better is the result</p></div>
</body></html>

Deer

Hello,
my first upload and my first blender to print creation.
A simple lowpoly deer.
Prints without support - the hole for the nail could be more polished - but it works!


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>WARNING!!! I HAVE NOT YET PRINTED THIS MODEL AND DON&apos;T KNOW HOW WELL THE PARTS WILL ASSEMBLE.  PRINT AT YOUR OWN RISK.</p>
<p>This is just a project I&apos;ve been working on.  I&apos;m new to blender (this is my second ever project in blender and by far the most complex) so things may not be done perfectly, but I like what I&apos;ve created and want to share it, since there doesn&apos;t seem to be many detailed bird models here.  The model prints as 7 separate parts, the belly and right/left patches should be white and the others black.  The lower body/tail section is just small enough to fit within the print height of an Ender 3.  I have included the full final model as well as the raw rigged sculpture that you can pose however you like.  There are some weight painting problems that I couldn&apos;t sort out especially where the legs meet the body.  I just posed it, saved the model as an stl or obj then reopened it in blender and smoothed out the rough parts in sculpt mode.  The model is about 1/3 of a meter head to tail.</p>
<p>I did not design this specifically with printing in mind, so some parts (like the feet) may require some post-processing.  I plan on primer and painting with matte black/white paints to smooth out rough spots then using epoxy to join the parts.  I&apos;m also hoping to find some black marbles/beads for the eyes.  I will be updating this post once I print the model and make the necessary changes.</p>
<p>I am considering making projects like this in the future.  Maybe a magpie in flight next.</p></div>
</body></html>

(bird) magpie

WARNING!!! I HAVE NOT YET PRINTED THIS MODEL AND DON'T KNOW HOW WELL THE PARTS WILL ASSEMBLE.  PRINT AT YOUR OWN RISK.

This is just a project I've been working on.  I'm new to blender (this is my second ever project in blender and by far the most complex) so things may not be done perfectly, but I like what I've created and want to share it, since there doesn't seem to be many detailed bird models here.  The model prints as 7 separate parts, the belly and right/left patches should be white and the others black.  The lower body/tail section is just small enough to fit within the print height of an Ender 3.  I have included the full final model as well as the raw rigged sculpture that you can pose however you like.  There are some weight painting problems that I couldn't sort out especially where the legs meet the body.  I just posed it, saved the model as an stl or obj then reopened it in blender and smoothed out the rough parts in sculpt mode.  The model is about 1/3 of a meter head to tail.

I did not design this specifically with printing in mind, so some parts (like the feet) may require some post-processing.  I plan on primer and painting with matte black/white paints to smooth out rough spots then using epoxy to join the parts.  I'm also hoping to find some black marbles/beads for the eyes.  I will be updating this post once I print the model and make the necessary changes.

I am considering making projects like this in the future.  Maybe a magpie in flight next.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a wheel chair type design for a bird that is injured. For my purpose is was used for a baby pigeon who fell out of a tree and broke their spine. The pigeon sits in it like a nest to keep them up right and we are able to wheel them around and look after them. It was based off the picture above of the chicken which you can easily make it bigger or taller and cut holes for the feet as well, depending on need and size of bird.<br>
Once you print everything and get them all connected, it is a rather loose fit, To keep them together i put a small glob of hot glue inside the connectors and put super glue on the pipe ends and around the circular part to keep them firmly to the connectors.<br>
I purchased a cheap pair of wheels from amazon (1.5&quot; wheel)</p>
<p><a rel="nofollow" href="https://www.amazon.com/gp/product/B07XJWDP1S/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&amp;psc=1&amp;tag=tv-auto-20">https://www.amazon.com/gp/product/B07XJWDP1S/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&amp;psc=1</a></p>
<p>Four of the pipes have holes on the bottom that you simple just screw them onto, it can be alittle tight but the metal teeth of the wheel cuts into the plastic for a snug fit, no need for glue for the wheels. (watch out for elephants foot)</p>
<p>You need support for the connectors.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=AIO+Robotics+PLA&amp;tag=tv-auto-20" target="_blank">
                        AIO Robotics PLA                    </a>

                    Blue
</body></html>

Bird Wheel Chair

This is a wheel chair type design for a bird that is injured. For my purpose is was used for a baby pigeon who fell out of a tree and broke their spine. The pigeon sits in it like a nest to keep them up right and we are able to wheel them around and look after them. It was based off the picture above of the chicken which you can easily make it bigger or taller and cut holes for the feet as well, depending on need and size of bird.
Once you print everything and get them all connected, it is a rather loose fit, To keep them together i put a small glob of hot glue inside the connectors and put super glue on the pipe ends and around the circular part to keep them firmly to the connectors. 
I purchased a cheap pair of wheels from amazon (1.5" wheel)

https://www.amazon.com/gp/product/B07XJWDP1S/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Four of the pipes have holes on the bottom that you simple just screw them onto, it can be alittle tight but the metal teeth of the wheel cuts into the plastic for a snug fit, no need for glue for the wheels. (watch out for elephants foot)

You need support for the connectors.

<html><head></head><body><div class="text-auto-link">
                                            <p>Pet Bird Parrot Chew Toy.</p>
<p><a title="MiroDesign" href="https://www.mirodesign.shop/">My web</a><br><a title="MiroDesign" href="https://www.youtube.com/channel/UC87KIJGNXBUO_dL5w-Bunhw?view_as=subscriber">Youtube Channel</a></p>
										</div>
                                    								</body></html>

Pet Bird Parrot Chew Toy

 Pet Bird Parrot Chew Toy. My webYoutube Channel 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>It&apos;s safe to say most people have a dislike ( ...hate ... are scared) of cockroaches. If you&apos;re in this group and have the odd roach problem then this could be your solution.</p>
<p>We were regularly getting cockroaches sheltering in our letterbox. All too often this meant you carried them inside the house hidden amongst the mail... particularly the junk mail. Sprays and baits inside the letterbox never seemed to have any effect (...although that&apos;s not to say they didn&apos;t wander away to die elsewhere?)</p>
<p>Baits aren&apos;t cheap and the idea of spray coated mail didn&apos;t exactly appeal either so I developed a small reusable &apos;Roach Trap&apos; that has proven to be effective at catching cockroaches. How you deal with them after they are trapped inside is up to you... spray insect spray up the entry, drop it all into water until they drown... or just open the end sliding door, knock them out and squash them. However you decide to deal with them at least you have a corpse so you know there&apos;s one less roach to annoy you.</p>
<p>This is a simple print with no support required and they don&apos;t use a lot of filament. Print with translucent filament so you can see through the thin walls and see if there&apos;s a roach inside ( ...you can shake it and they often start scuttling around). Use 2 shells but high infill (50%) to make sure the walls are almost solid and strong... after all this is a Roach prison.</p>
<p>In operation, attracted to the trap by a tempting smell, there is a ramp that is easy for a cockroach to climb. At the end of the ramp there is a drop into the trap... they drop in only to discover there is no way out. The ramp is a tunnel / tube that has no walls / surfaces leading to the entrance that a cockroach can climb to escape. At the other end of the trap is a small sliding door. This is used to insert the bait and... remove trapped Roaches.</p>
<p>To attract cockroaches to your trap use something like a small piece of banana and banana peel inside the trap through the sliding door. Having searched online for things that attract cockroaches sweet/fragrant things like this seem to work well... just don&apos;t put too much as a cockroach could potentially climb over and get out.</p>
<p>This is a really simple little solution to an annoying problem most people have to deal with at times. The &apos;Roach Trap&apos; is reusable, doesn&apos;t need any expansive baits or sprays so can save you money and the concern about poisons on surfaces around your home.</p>
<p>Give it a go... print one... catch a few and you&apos;ll print more!</p>
<p>To the best of my knowledge there is no similar commercial solution remotely like this.... at standard size they &apos;Roach Trap&apos; measures 32mm (W) x 57.5mm (L) x 22mm (H). This works well with the Roaches in our area up to about 25mm long. Got bigger Roaches... just scale it up uniformly and it should work just as well. Scaling down is not recommended.</p>
<p>Please refer to the images and print instructions for additional information. Your Roach Trap must be used the correct way up to trap Roaches!</p>
<p>Note: If you like this check out the rest of my practical and fun designs.</p>
										</div>
										
                                    								</body></html>

Roach Trap...Reusable trap to catch and kill cockroaches

 It's safe to say most people have a dislike ( ...hate ... are scared) of cockroaches. If you're in this group and have the odd roach problem then this could be your solution. We were regularly getting cockroaches sheltering in our letterbox. All too often this meant you carried them inside the house hidden amongst the mail... particularly the junk mail. Sprays and baits inside the letterbox never seemed to have any effect (...although that's not to say they didn't wander away to die elsewhere?) Baits aren't cheap and the idea of spray coated mail didn't exactly appeal either so I developed a small reusable 'Roach Trap' that has proven to be effective at catching cockroaches. How you deal with them after they are trapped inside is up to you... spray insect spray up the entry, drop it all into water until they drown... or just open the end sliding door, knock them out and squash them. However you decide to deal with them at least you have a corpse so you know there's one less roach to annoy you. This is a simple print with no support required and they don't use a lot of filament. Print with translucent filament so you can see through the thin walls and see if there's a roach inside ( ...you can shake it and they often start scuttling around). Use 2 shells but high infill (50%) to make sure the walls are almost solid and strong... after all this is a Roach prison. In operation, attracted to the trap by a tempting smell, there is a ramp that is easy for a cockroach to climb. At the end of the ramp there is a drop into the trap... they drop in only to discover there is no way out. The ramp is a tunnel / tube that has no walls / surfaces leading to the entrance that a cockroach can climb to escape. At the other end of the trap is a small sliding door. This is used to insert the bait and... remove trapped Roaches. To attract cockroaches to your trap use something like a small piece of banana and banana peel inside the trap through the sliding door. Having searched online for things that attract cockroaches sweet/fragrant things like this seem to work well... just don't put too much as a cockroach could potentially climb over and get out. This is a really simple little solution to an annoying problem most people have to deal with at times. The 'Roach Trap' is reusable, doesn't need any expansive baits or sprays so can save you money and the concern about poisons on surfaces around your home. Give it a go... print one... catch a few and you'll print more! To the best of my knowledge there is no similar commercial solution remotely like this.... at standard size they 'Roach Trap' measures 32mm (W) x 57.5mm (L) x 22mm (H). This works well with the Roaches in our area up to about 25mm long. Got bigger Roaches... just scale it up uniformly and it should work just as well. Scaling down is not recommended. Please refer to the images and print instructions for additional information. Your Roach Trap must be used the correct way up to trap Roaches! Note: If you like this check out the rest of my practical and fun designs. 

Thingscanner

Some articles you might like