Name: ATA_Prints Mount
Brand: ATA_Prints
Availability: InStock

BitDrones are turning the virtual world into reality. By equipping drones with 3D printed gear, they can create images and systems.

BitDrones Create Holograms and Models In Mid-Air | All3DP

CRACUNS is a 3D printed drone can stay underwater for two months before launching into the air on command.

3D Printed CRACUNS Drone Can be Launched from Underwater | All3DP

Forget air conditioning. With a splash of water, these 3D Printed Bricks use science to keep the temperature down.

3D Printed Bricks Lower Temperature by Adding Water to Air | All3DP

The South Korean military is now adopting metal 3D printing to manufacture parts for the Air Force and the Army.

South Korean Military Starts Using 3D Printing | All3DP

Zimpure is a special air purifier for desktop 3D printers, currently on Kickstarter. We take a look at the science behind the health claims.

Harmful 3D Printing Emissions Cleared with Zimpure Air Filter | All3DP

Held together with 3D printed joints and utilizing high-tech The Breath fabric, Japanese architect Kengo Kuma's "breath/ng" sculpture looks good and does good.

This Folded Sculpture Captures the Pollution from the Air | All3DP

The US Air Force Research Lab uses the National Synchrotron Light Source to better understand & formulate new 3D print-strengthening fillers.

AFRL Researchers Study Print-Strengthening Fillers Using X-Rays | All3DP

3D printed Bholdable Cup has a double-wall design and air buffers that cool your hands while keeping your drink hot.

Beautiful 3D printed tea cups | All3DP

Surrounding the excitement of the Berlin Air Show last week, an innovative 3D printed drone was unveiled with the intriguing name Thor.

Airbus Unveils 3D Printed Aircraft Thor at Berlin Air Show | All3DP

Concerned about harmful emissions from 3D printing? Rachel Spieczny interviews Dr. Brent Stephens, author of the paper whose findings startled the industry.

3D Printing & Air Quality: An Interview with Dr. Brent Stephens | All3DP

Moisture from the air can easily ruin your 3D printer filament, meaning it can also ruin your prints! Here's how to dry filament.

How to Dry Filament: PLA, ABS, & Nylon | All3DP

Enterprise In Space (EIS) and Made In Space, Inc. are working together to launch a 3D printed air frame spacecraft into the Earth orbit.

Spacecraft "Enterprise" Is Looking for Funding | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Replacement part for R22 Allgaier prefilter.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=ICE+Filament+PETG&amp;tag=tv-auto-20" target="_blank">
                        ICE Filament PETG                    </a>

                    White transparent
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Printed with spherical side on top with &apos;Tree support&apos; and &apos;Ironing&apos;.</p></div>
</body></html>

Air pre-filter bowl

Replacement part for R22 Allgaier prefilter.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a snap on mag spacer for the AK74 platform of AEGs, for install tutorial and more info on future projects, plz follow me over @ata_prints on instagram</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+Pla&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex Pla                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>This could also work on selct AK47-M AEGs</p></div>
</body></html>

AK74 Mag Spacer

This is a snap on mag spacer for the AK74 platform of AEGs, for install tutorial and more info on future projects, plz follow me over @ata_prints on instagram

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><h3>Northrop Grumman EA-6B Prowler</h3>
<p>The Northrop Grumman EA-6B Prowler is a twin-engine, four-seat, mid-wing electronic-warfare aircraft. The Prowler was in service with the U.S. Armed Forces from 1971 until 2019. It has carried out numerous missions for jamming enemy radar systems, and in gathering radio intelligence on those and other enemy air defense systems. </p>
<p>From the 1998 retirement of the United States Air Force EF-111 Raven electronic warfare aircraft, the EA-6B was the only dedicated electronic warfare plane available for missions by the U.S. Navy, the U.S. Marine Corps, and the U.S. Air Force until the fielding of the Navy&apos;s EA-18G Growler in 2009. Following its last deployment in late 2014, the EA-6B was withdrawn from U.S. Navy service in June 2015, followed by the USMC in March 2019.</p>
<p><a rel="nofollow" href="https://en.wikipedia.org/wiki/Northrop_Grumman_EA-6B_Prowler">Wikipedia</a></p>
<h3>The print</h3>
<p>I have included 7 files.The first file is the kit card itself. This card is only provided with loop on the body. The second and third file is the main body. One is with a ring/loop and the other is a clean version.<br>
Main body. Print 1x<br>
Main wing. Print 1x<br>
Rear wing. Print 1x<br>
Intake. Print 2x<br>
UnderTheWingThing. Print 4x (I don&apos;t know what this is. If you know it, let me know!)</p>
<h3>More designs</h3>
<p>Let me know what you think of it! This is my secondkit card so probably not the best, but it was really fun to design and print. If you like this design check my profile for more and make sure you check <a rel="nofollow" href="/nakozen/designs">Nakozen his profile for more designs!</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0,2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>10% and higher</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=REAL+Filament+PLA&amp;tag=tv-auto-20" target="_blank">
                        REAL Filament PLA                    </a>

                    White
</body></html>

EA-6B Prowler Kit Card

<h1>Northrop Grumman EA-6B Prowler</h1>
The Northrop Grumman EA-6B Prowler is a twin-engine, four-seat, mid-wing electronic-warfare aircraft. The Prowler was in service with the U.S. Armed Forces from 1971 until 2019. It has carried out numerous missions for jamming enemy radar systems, and in gathering radio intelligence on those and other enemy air defense systems. 

From the 1998 retirement of the United States Air Force EF-111 Raven electronic warfare aircraft, the EA-6B was the only dedicated electronic warfare plane available for missions by the U.S. Navy, the U.S. Marine Corps, and the U.S. Air Force until the fielding of the Navy's EA-18G Growler in 2009. Following its last deployment in late 2014, the EA-6B was withdrawn from U.S. Navy service in June 2015, followed by the USMC in March 2019.

[Wikipedia](https://en.wikipedia.org/wiki/Northrop_Grumman_EA-6B_Prowler)

<h2>The print</h2>
I have included 7 files.The first file is the kit card itself. This card is only provided with loop on the body. The second and third file is the main body. One is with a ring/loop and the other is a clean version.
Main body. Print 1x
Main wing. Print 1x
Rear wing. Print 1x
Intake. Print 2x
UnderTheWingThing. Print 4x (I don't know what this is. If you know it, let me know!)

<h2>More designs</h2>
Let me know what you think of it! This is my secondkit card so probably not the best, but it was really fun to design and print. If you like this design check my profile for more and make sure you check [Nakozen his profile for more designs!](https://www.thingiverse.com/nakozen/designs)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Shorter version of my picatinny G36 carry handle.<br>
It measures 11.618&quot; (295.09mm) in length.</p>
<p>I use 2X 6-32x0.625&quot; set screws to align the rail section,<br>
and 3X 6-32x1.125&quot; Pan head screws for mounting to gun</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>I3 MK3S</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Overture+PETG&amp;tag=tv-auto-20" target="_blank">
                        Overture PETG                    </a>
</body></html>

G36 Picatinny Carry Handle, short

Shorter version of my picatinny G36 carry handle.
It measures 11.618" (295.09mm) in length.

I use 2X 6-32x0.625" set screws to align the rail section, 
and 3X 6-32x1.125" Pan head screws for mounting to gun

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The stock carburetor to airbox rubbers we have on our Suzuki GSXR1100 W is a real pain to get over the carbs and then to secure in place.</p>
<p>I redesigned them, giving them a large ID to for an easy but snug fit over the carbs. I then went further and opened them up to the OD of the carb intakes so that the only restriction becomes the carb itself. I also follow the same principles as seen on many other bikes with a slight bell mouth and the longer inner 2 and shorter outer 2.</p>
<p>Unfortunately you will need to cut the holes for the rubbers in the airbox larger using the template included herewith. Please note this has not been tested yet so it is unknow it this point of the bell-mouths will flex enough to get through the holes.</p>
<p>As of 2020/11/04 this has not been tested yet as the engine still needs to be fixed and reinstalled into the bike.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Prusa</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p><a rel="nofollow" href="http://amzn.to/2rqZ6Uo?tag=tv-auto-20" target="_blank">Prusa Clone</a></p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>15%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=MambaWire+TPU+TPU+&amp;tag=tv-auto-20" target="_blank">
                        MambaWire TPU TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used MambaWire  TPU, with support enforcers.</p></div>
</body></html>

Suzuki GSXR1100 W Carb To Airbox Adaptors

The stock carburetor to airbox rubbers we have on our Suzuki GSXR1100 W is a real pain to get over the carbs and then to secure in place.

I redesigned them, giving them a large ID to for an easy but snug fit over the carbs. I then went further and opened them up to the OD of the carb intakes so that the only restriction becomes the carb itself. I also follow the same principles as seen on many other bikes with a slight bell mouth and the longer inner 2 and shorter outer 2.

Unfortunately you will need to cut the holes for the rubbers in the airbox larger using the template included herewith. Please note this has not been tested yet so it is unknow it this point of the bell-mouths will flex enough to get through the holes.

As of 2020/11/04 this has not been tested yet as the engine still needs to be fixed and reinstalled into the bike.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Air gun holder under bench</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+PETG&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex PETG                    </a>

                    Black
</body></html>

Air gun holder

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just my design of module for Amoeba handguard.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>DE200 Modified</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.20</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Amzon+basics+PETG&amp;tag=tv-auto-20" target="_blank">
                        Amzon basics PETG                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Supports only for &quot;Stop&quot; and &quot;foregrip&quot;</p></div>
</body></html>

Amoeba Grip compatible

Just my design of module for Amoeba handguard.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I have bought the elegoo air filters for my Saturn printer. They have active charcoal filters in them.<br>
But when i started to look for replacement i couldn&apos;t find any.</p>
<p>So i designed my own.</p>
<p>It is a holder to keep active charcoal in that you can buy for aquariums.</p>
<p>Is going to be much cheaper in the end i think.</p>
<p>Printed it with my Saturn because i need the practice (first resin printer ever)</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Elegoo Saturn</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.05</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Longer+resin+Standard+resin&amp;tag=tv-auto-20" target="_blank">
                        Longer resin Standard resin                    </a>

                    grey
</body></html>

Elegoo filter replacement

I have bought the elegoo air filters for my Saturn printer. They have active charcoal filters in them.
But when i started to look for replacement i couldn't find any.

So i designed my own.

It is a holder to keep active charcoal in that you can buy for aquariums.

Is going to be much cheaper in the end i think.

Printed it with my Saturn because i need the practice (first resin printer ever)

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Plane stencil</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

Plane stencil

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>The AirBlade UAV Transformer 4&quot; mini long range frame builds a nice little machine.  Here are some printer parts that I used in my build.</p>
<p>The GPS / SMA module is a remix of the original design from AirBlade, just to make it easier to print.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Monoprice</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Maker Select Plus</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>35%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
</body></html>

AirBlade Transformer Mini - 4" Long Range Part

The AirBlade UAV Transformer 4" mini long range frame builds a nice little machine.  Here are some printer parts that I used in my build.

The GPS / SMA module is a remix of the original design from AirBlade, just to make it easier to print.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This the ATA LUXPRO130 Flaslight Mount, this mount requires an adapter that is also included in the download, to learn more, follow me @ata_prints on instagram</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+Pla&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex Pla                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p><em>REQUIRES ATA MOUNT</em></p></div>
</body></html>

LUXPRO130 Flaslight Mount

This the ATA LUXPRO130 Flaslight Mount, this mount requires an adapter that is also included in the download, to learn more, follow me @ata_prints on instagram

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a new mount that i designed for all of my future prints, this mount is to save plastic and removes need for non-3D printable parts. To recieve updates on this mounts attatchments, follow me @ata_prints on instagram (currently theres a flashligh mount for the LUXPRO130 flaslight) ID:LUXPRO130 Flaslight Mount</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+Pla&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex Pla                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Make sure to use the ATA mount file, the plate is just a test</p></div>
</body></html>

ATA_Prints Mount

This is a new mount that i designed for all of my future prints, this mount is to save plastic and removes need for non-3D printable parts. To recieve updates on this mounts attatchments, follow me @ata_prints on instagram (currently theres a flashligh mount for the LUXPRO130 flaslight) ID:LUXPRO130 Flaslight Mount

Thingscanner

Some articles you might like