There are so many great 3D printable designs for Overwatch enthusiasts. This one takes it a bit further by making Mercy’s Staff actually functional.

Working Overwatch Mercy’s Staff Has Motorized Adjustable Winglets | All3DP

There is definitely no shortage of great 3D printed accessories for the Nintendo Switch, ranging from to adjustable Switch stands to steering wheels to fun mounts like a Joy-con can holder. The newest addition is a Joy-con grip that can fit your phone inside it.

3D Print a Joy-Con Grip For Your Smartphone | All3DP

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Remixed version of the reinforced Y-axis endstop mount. </p>
<p>I made this because the endstop I had did not mount in the original holes properly. this mount allows me to securely mount the endtop at the distance I need it. Has a slot for the endstop to slide along inside to adjust the depth of the trigger. Once positioned it can be locked down using an M3 nut and bolt. Slot on the top is for cable to slide in so you don&apos;t need to remove the connector and thread it through the part.</p>
<p>Note: MAY NOT work with wingnuts or thumbwheels as my Ultrabase is mounted without springs due to mesh leveling. Depends on the height of your screws holding the part to the extrusion frame. I was lucky that the wingnut passes cleanly over the screw.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Anet</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>A8</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.15</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Yousu+PLA&amp;tag=tv-auto-20" target="_blank">
                        Yousu PLA                    </a>

                    Silk Pink
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used a gyroid infill with 3 walls. Set the infill percentage to whatever looks like will give a good fill of the flexural parts. Orient the part as shown in the Cura screenshot </p></div>
</body></html>

AM8 Y Axis Adjustable Endstop Mount

Remixed version of the reinforced Y-axis endstop mount. 
 
I made this because the endstop I had did not mount in the original holes properly. this mount allows me to securely mount the endtop at the distance I need it. Has a slot for the endstop to slide along inside to adjust the depth of the trigger. Once positioned it can be locked down using an M3 nut and bolt. Slot on the top is for cable to slide in so you don't need to remove the connector and thread it through the part.
 
Note: MAY NOT work with wingnuts or thumbwheels as my Ultrabase is mounted without springs due to mesh leveling. Depends on the height of your screws holding the part to the extrusion frame. I was lucky that the wingnut passes cleanly over the screw.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Detailed explanation in my blogpost: <a rel="nofollow" href="https://nerd-corner.com/2-adjustable-axis-cad-design/">https://nerd-corner.com/2-adjustable-axis-cad-design/</a></p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.16</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Polymaker+Polyflex+TPU+&amp;tag=tv-auto-20" target="_blank">
                        Polymaker Polyflex TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I used Polyflex TPU, with tree supports with the camera mount printed on its side.<br>
Print Speed of 20mm/s. </p></div>
</body></html>

2 adjustable axis (Y-Z Axis)

Detailed explanation in my blogpost: https://nerd-corner.com/2-adjustable-axis-cad-design/

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Adjustable foot for stools/chairs with 1 inch round legs.  Uses 1/4x20 threaded inserts and bolts.  I used 1 1/4 inch bolts, but you can use other sizes depending on how much adjustment is desired.  I would avoid going too long, unless you increase the height of the foot piece, since it contains an inner bushing to help support the bolt.</p>
<p>I find that fairly rigid TPU works very well, and looks like original equipment.</p>
<p>If desired, omit the threaded sleeve and bolt, and simply use the foot piece as a non-skid replacement for rubber feet that typically come with these chairs/stools.</p>
<p>Use a hacksaw to cut the legs of the stool/chair to a height slightly less than desired, then file or sand the edges to dull them so they don&apos;t cut through the TPU.   Insert the foot pieces, then the threaded inserts.  Put the 1/4x20 bolt through the bolt holder, then use E-6000 or other adhesive to attach the bolt cap.  Allow to cure before assembling.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=SainSmart+or+Zyltec+TPU+&amp;tag=tv-auto-20" target="_blank">
                        SainSmart or Zyltec TPU                     </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I originally used SainSmart TPU, but rad out, and used Zyltec for the final product.  In a pinch pretty much any TPU with high Shore hardness should work well.</p></div>
</body></html>

Adjustable Stool Foot

Adjustable foot for stools/chairs with 1 inch round legs.  Uses 1/4x20 threaded inserts and bolts.  I used 1 1/4 inch bolts, but you can use other sizes depending on how much adjustment is desired.  I would avoid going too long, unless you increase the height of the foot piece, since it contains an inner bushing to help support the bolt.

I find that fairly rigid TPU works very well, and looks like original equipment.

If desired, omit the threaded sleeve and bolt, and simply use the foot piece as a non-skid replacement for rubber feet that typically come with these chairs/stools.

Use a hacksaw to cut the legs of the stool/chair to a height slightly less than desired, then file or sand the edges to dull them so they don't cut through the TPU.   Insert the foot pieces, then the threaded inserts.  Put the 1/4x20 bolt through the bolt holder, then use E-6000 or other adhesive to attach the bolt cap.  Allow to cure before assembling.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>For all of you that have been using various celulose based feeler gauges...look no further</p>
<p>This is a printable first layer adhesion test for everyone that think global warming and autoleveling function is a hoax... fake news ladies and gentleman</p>
<p>Works dandy on glass because glass is usually flatter than other non-machined beds and thus better (at least in my case)</p>
<p>Test pads are for beds 200x200, 300x300, 400x400</p>
<p>How it works?</p>
<p>Import to slicer<br>
Slice with your favorite settings, without brim/skirt</p>
<p>Leveling process:</p>
<ul><li>Start printing, lower the feed rate maybe</li>
<li>During the print observe first layer height, width, adhesion and adjust bed height corners accordingly. Raise the corner if stringing, lower the corner if scraping, smearing or nothing extrudes until even adhesion occurs. Watch your fingers. </li>
<li>Repeat the process every 50-100 prints or whenever you need to do it again (e.g. after component change, transport...)</li>
</ul><p>Tip for clear glass beds, clean with dishsoap, dry, install. No masking tape, glue, hairspray, bat wing soup, bird milk, toad slime, snail slime, eel slime, dry llama spit,.... and other malarkey.<br>
Feel free to add other popular adhesives used in first layer printing in the comments </p>
<p>The printed part could be used to frame some ugly photos or as a square just in case you freshly run out of squares</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>SPONSOR MY PRINTER</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>100</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Frog+guts+Steel&amp;tag=tv-auto-20" target="_blank">
                        Frog guts Steel                    </a>

                    Pinkish
</body></html>

BED LEVELING TEST PAD

For all of you that have been using various celulose based feeler gauges...look no further

This is a printable first layer adhesion test for everyone that think global warming and autoleveling function is a hoax... fake news ladies and gentleman

Works dandy on glass because glass is usually flatter than other non-machined beds and thus better (at least in my case)

Test pads are for beds 200x200, 300x300, 400x400

How it works?

Import to slicer
Slice with your favorite settings, without brim/skirt

Leveling process:
- Start printing, lower the feed rate maybe
- During the print observe first layer height, width, adhesion and adjust bed height corners accordingly. Raise the corner if stringing, lower the corner if scraping, smearing or nothing extrudes until even adhesion occurs. Watch your fingers. 
- Repeat the process every 50-100 prints or whenever you need to do it again (e.g. after component change, transport...)

Tip for clear glass beds, clean with dishsoap, dry, install. No masking tape, glue, hairspray, bat wing soup, bird milk, toad slime, snail slime, eel slime, dry llama spit,.... and other malarkey.
Feel free to add other popular adhesives used in first layer printing in the comments 

The printed part could be used to frame some ugly photos or as a square just in case you freshly run out of squares



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Just a quick and dirty modification to jsteuben&apos;s &apos;Adjustable Groove-Joint Pliers&apos;. I made the arms a bit thicker, a hole for an m4 screw and made it so the jaws will grip onto rounded objects better. </p>
<p>The clearances are fairly tight so mind your slicer settings and make sure everything is tuned or these pliers won&apos;t work.</p>
<p>I made it for m4x14 screws with nuts, you may need a soldering iron to push in the nut, and you may need to drill the hole slightly bigger depending on your printer/slicer/settings/filament quality. Also I made a bridge to support the hole for the m4 screw, it is .2mm, I may remove the bridge and the provision for an m4 nut and make the hole a bit smaller so you can just thread an m4 nut into the hole rather than using a nut. </p>
<p>Specifically made for Bitspower 1/2 ID 3/4 OD compression fittings doesn&apos;t need to be super strong, I just needed something to get into tight spots and not scratch the fittings, plus they tend to be hard on your fingers after you have tightened a dozen or so of them. </p>
<p>I made a version with the original scaling (35mm) and a scaled down version(26mm) specifically for my compression fittings. </p></div>
</body></html>

Channel lock pliers I modified for compression fittings

Just a quick and dirty modification to jsteuben's 'Adjustable Groove-Joint Pliers'. I made the arms a bit thicker, a hole for an m4 screw and made it so the jaws will grip onto rounded objects better. 

The clearances are fairly tight so mind your slicer settings and make sure everything is tuned or these pliers won't work.

I made it for m4x14 screws with nuts, you may need a soldering iron to push in the nut, and you may need to drill the hole slightly bigger depending on your printer/slicer/settings/filament quality. Also I made a bridge to support the hole for the m4 screw, it is .2mm, I may remove the bridge and the provision for an m4 nut and make the hole a bit smaller so you can just thread an m4 nut into the hole rather than using a nut. 


Specifically made for Bitspower 1/2 ID 3/4 OD compression fittings doesn't need to be super strong, I just needed something to get into tight spots and not scratch the fittings, plus they tend to be hard on your fingers after you have tightened a dozen or so of them. 

I made a version with the original scaling (35mm) and a scaled down version(26mm) specifically for my compression fittings. 


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I bought an IKEA LACK Table and IKEA MAGLEHULT LED Lamp to set a small work space for my son.  I wanted to mount the lamp in a way that it could adjust up and down and do so in a way that would not require any drilling or cutting.</p>
<p>I found mistertech&apos;s Headphone Mount and figured I could remix it to get what I needed.  I cut off the wire holder from underneath, stretched it to fit the fatter LACK table top, added a hole for the lamp base to slide through, added a bracket for the lamp to rest against, and put a 1/4&quot;-20 screw hole in back to allow for an adjustment screw.  I created a star knob with a 1/4&quot;-20 thread to be able to lock the lamp in at the selected height.</p>
<p>This has worked very well for what I had in mind.  </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>CR-10</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.3</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Inland+PLA&amp;tag=tv-auto-20" target="_blank">
                        Inland PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>This was actually printed on my CR-6 SE, but Thingiverse doesn&apos;t allow that as a drop down option.</p>
<p>Printed with a layer height of 0.3mm, infill of 20%.</p>
<p>I highly recommend printing the screw and star knob horizontally with supports.  The 1/4&quot; in particular will spin itself apart pretty quickly if printed vertically.</p></div>
</body></html>

Adjustable Height Desk Clamp for IKEA MAGLEHULT LED Lamp

I bought an IKEA LACK Table and IKEA MAGLEHULT LED Lamp to set a small work space for my son.  I wanted to mount the lamp in a way that it could adjust up and down and do so in a way that would not require any drilling or cutting.

I found mistertech's Headphone Mount and figured I could remix it to get what I needed.  I cut off the wire holder from underneath, stretched it to fit the fatter LACK table top, added a hole for the lamp base to slide through, added a bracket for the lamp to rest against, and put a 1/4"-20 screw hole in back to allow for an adjustment screw.  I created a star knob with a 1/4"-20 thread to be able to lock the lamp in at the selected height.

This has worked very well for what I had in mind.  



<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a complete, multi-diameter coffee leveler/distribution tool/leveling tool/tamper.</p>
<p>It consists of:</p>
<ul><li>&quot;Tampers&quot; -exchangeable end with different diameters - popular ones (from 45mm to 58mm)</li>
<li>&quot;Collar&quot; - it&apos;s used to adjust the height of the &quot;tamper&quot;</li>
<li>&quot;Blocker&quot; - it simply blocks the &quot;tamper&quot; on a certain height, holds it tight :)</li>
</ul><p>It is very much inspired by the Chinese coffee leveling tool. </p>
<p>It would be good to sand the end of the &quot;tamper&quot; to make the surface as much slippery as possible.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>33%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Plast-spaw+PLA&amp;tag=tv-auto-20" target="_blank">
                        Plast-spaw PLA                    </a>

                    Black
</body></html>

Adjustable Multi-diameter Coffee Distribution and Leveling Tool - tamper

This is a complete, multi-diameter coffee leveler/distribution tool/leveling tool/tamper.

It consists of:

- "Tampers" -exchangeable end with different diameters - popular ones (from 45mm to 58mm)
- "Collar" - it's used to adjust the height of the "tamper"
- "Blocker" - it simply blocks the "tamper" on a certain height, holds it tight :)

It is very much inspired by the Chinese coffee leveling tool. 

It would be good to sand the end of the "tamper" to make the surface as much slippery as possible.




<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Adjustable Led bar holder </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=none+PLA&amp;tag=tv-auto-20" target="_blank">
                        none PLA                    </a>

                    Black
</body></html>

Ender 3 v2 Adjustable Led Bar Light Holder

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>I&apos;ve made an adjustable cover for ender 3 for the x axis endstop..</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>13%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=generic+PLA&amp;tag=tv-auto-20" target="_blank">
                        generic PLA                    </a>

                    Black
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>You have to print 2x Ad_X_endstop_side.stl<br>
Print the top cover upsidedown without support.<br>
No extra hardware needs.<br>
Ps. Started modding an stl ( X_Axix_Cover_Bracket.stl ) downloaded from here, but I can&apos;t find the ThingID to check the remix option</p></div>
</body></html>

Adjustable X axis Endstop Ender 3

I've made an adjustable cover for ender 3 for the x axis endstop..


<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>This is a handlebar mount base for the phone holder. You feed zip ties through the holes and use a couple of layers of duct tape around the handlebars or a rubber strip underneath the zip ties to keep it from moving. I&apos;ve gone on one ride with it so far and I have no complaints so far. I would recommend you tether your phone to the motorcycle with a small lanyard or something, just in case. The bike I put it on is a 2001 Suzuki Bandit, but I think it will fit many different motorcycles or bicycles. </p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>50%-100%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Creality+PLA&amp;tag=tv-auto-20" target="_blank">
                        Creality PLA                    </a>

                    Red
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>I had trouble with the supports sticking near the thicker part of the long base but I mounted it ugly side down.</p></div>
</body></html>

Handlebar base for universal phone mount

This is a handlebar mount base for the phone holder. You feed zip ties through the holes and use a couple of layers of duct tape around the handlebars or a rubber strip underneath the zip ties to keep it from moving. I've gone on one ride with it so far and I have no complaints so far. I would recommend you tether your phone to the motorcycle with a small lanyard or something, just in case. The bike I put it on is a 2001 Suzuki Bandit, but I think it will fit many different motorcycles or bicycles. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>COVID Face mask Ear saver / Strap / Buckle / Tensioner FIX &amp; Adjustable</p>
<p>In both of my designs you can scale one of the main axis to set the perfect length for your face mask hook</p>
<p>Original files main dimensions.<br>
Fix: 152x36x1,2<br>
Adjustable: 202x36x1,2</p>
<p>Hope this models can help to prevent the Covid-19</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 5</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>Doesn&apos;t Matter</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>20%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Sunlu+PLA%2B&amp;tag=tv-auto-20" target="_blank">
                        Sunlu PLA+                    </a>

                    Black &amp; Green
                
                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>
                        </p><div><p>Scaling axis you set the perfect lenght for your face mask tensioner</p></div>
</body></html>

COVID FACE MASK EAR SAVER FIX & ADJUSTABLE

COVID Face mask Ear saver / Strap / Buckle / Tensioner FIX & Adjustable

In both of my designs you can scale one of the main axis to set the perfect length for your face mask hook

Original files main dimensions.
Fix: 152x36x1,2
Adjustable: 202x36x1,2

Hope this models can help to prevent the Covid-19

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>It&apos;s a remix but I can&apos;t find the original one. It&apos;s an adjustable endstop that I&apos;ve changed for the Tronxy X1. Mount it with the x axis motor screws.</p></div>
<h3 class="thing-component-header settings print-settings">Print Settings</h3>
<p class="detail-setting printer brand"><strong>Printer Brand: </strong>
                         </p><div><p>Creality</p></div>
<p></p>                                    
                                                <p class="detail-setting printer"><strong>Printer: </strong>
                         </p><div><p>Ender 3 Pro</p></div>
<p></p>                                    
                                                <p class="detail-setting rafts"><strong>Rafts: </strong>
                         </p><div><p>No</p></div>
<p></p>                                    
                                                <p class="detail-setting supports"><strong>Supports: </strong>
                         </p><div><p>Yes</p></div>
<p></p>                                    
                                                <p class="detail-setting resolution"><strong>Resolution: </strong>
                         </p><div><p>0.2</p></div>
<p></p>                                    
                                                <p class="detail-setting infill"><strong>Infill: </strong>
                         </p><div><p>25%</p></div>
<p></p>                                    
                    <strong>Filament:</strong> 
                    <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=REAL+PETG&amp;tag=tv-auto-20" target="_blank">
                        REAL PETG                    </a>

                    Black
</body></html>

Tronxy X1 X-axis adjustable endstop

It's a remix but I can't find the original one. It's an adjustable endstop that I've changed for the Tronxy X1. Mount it with the x axis motor screws.

Thingscanner

Some articles you might like

Working Overwatch Mercy’s Staff Has Motorized Adjustable Winglets | All3DP

3D Print a Joy-Con Grip For Your Smartphone | All3DP

Show Only

Looking for tag: adjustable