The additive manufacturing laboratory at Northwestern University, USA, proves the viability of 3D printing using extraterrestrial dust.

3D Printed Space Dust Tools and Buildings a Reality | All3DP

In a pioneering operation, surgeons use 3D scanning and 3D printing to verify that a father's kidney would fit in his young son's abdomen before a live-saving kidney transplant.

3D Printing Saves Toddler's Life with Kidney Transplant | All3DP

A MakerBot Innovation Center has opened at Mount Olive High School in New Jersey, offering teachers and students wider access to 3D printing.

Mount Olive High School Opens MakerBot Innovation Center | All3DP

3D printed chainmail is an excellent choice for DIY armor! Fire up the furnace (ahem – 3D printer) and read on for our top 10 picks!

3D Printed Chainmail: 10 Best Models to Create Your Own | All3DP

Inspired by biology and nature: A 3D printed finger is improving prosthetics while using a combination of new technologies.

BioRobotic 3D Printed Finger Could Advance Prosthetics | All3DP

April showers and May flowers are fine and dandy, but for flowers that delight and live forever, 3D print these beautiful blossoms.

3D Printed Flowers – 7 Best Models for Springtime Cheer | All3DP

Z offset control can be useful for a number of reasons, including printing on an object. Learn how to adjust Cura's Z offset setting!

Cura: Z Offset – Simply Explained | All3DP

¿Qué filamento se ajusta más a tus necesidades? Te explicamos las diferencias y los campos de aplicación del filamento ABS y PLA.

PLA vs ABS: comparación de filamentos para impresión 3D | All3DP

You might not think of paper as a suitable medium for constructing 3D models, but it's actually quite potent. Check out this guide on 3D paper modeling to learn more.

3D Paper Modeling: A Hands-On Introduction | All3DP

A Kickstarter campaign offers a new breed of smartwatch band. They should help you get a better view on your stats while making sports.

For Runners And Cyclists: Shift, the Smartwatch Band | All3DP

Researchers in Germany have created a "Protopiper"; a handy prototyping device that turns tubes of tape into sturdy 3D structures.

Protopiper Device Physically Sketches Objects | All3DP

3D printing service Meltwerk promises to cut the price for 3D printed objects drastically. On some prints you can save up to 85 percent.

Meltwerk slashes the price of 3D printing by 85% | All3DP

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>Vase designed in Rhino using loft tools and offset.</p>
<p><a href="http://www.thingiverse.com/thing:1016664"><strong>Curvilinear Vase</strong></a>&#xA0;by&#xA0;<a href="http://www.thingiverse.com/areynolds15"><strong>areynolds15</strong></a>&#xA0;is licensed under the<a href="http://creativecommons.org/licenses/by-sa/3.0/"><strong>Creative Commons - Attribution - Share Alike</strong></a>license.</p>
<p>&#xA0;</p>
										</div>
										
                                    								</body></html>

Curvilinear Vase

 Vase designed in Rhino using loft tools and offset. Curvilinear Vase by areynolds15 is licensed under theCreative Commons - Attribution - Share Alikelicense. 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>base for ogre pirate king on stoneclaw - patreon teaser</p></div>
</body></html>

base for ogre pirate king on stoneclaw - patreon teaser

Flexible Bracelet V55

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>You already know what you are doing on the third of March?<br>Yes? Then this could be something for you. :-)</p>
<p>1:1 scale (Original size)<br>You can illuminate the screen with Led&apos;s</p>
<p>There are two Joycon versions:</p>
<p>-One with a bare joycon body and separated buttons. This version is marked with a &#x201C;-x-&#x201C; in the filename.<br>-A solid one with buttons and Joycon body in one piece. ( -z- )</p>
<p>There three console versions:</p>
<p>-A two-part model that you can use with LEDs. ( -y- )<br>-A solid single piece model. ( -w- )<br>-A solid two-piece model for smaller 3d printers. ( -k- )</p>
<p><br>Instructions</p>
<p>Print with infill, no support.<br>Glue the parts together.<br>Print &quot;screen.pdf&quot;, cut it out and stick it to the front of the console<br>If you use LED&#x2019;s, I recommend to print the &quot;screen.pdf&quot; twice and glue one on top of the other.</p>
<p>Upload a photo and enjoy the anticipation!</p>
<p>If you have any suggestions for improvement, questions or need further information, feel free to contact me.<br>Gerne auch auf Deutsch :-)</p>
										</div>
										
                                    								</body></html>

Nintendo Switch

 You already know what you are doing on the third of March?Yes? Then this could be something for you. :-) 1:1 scale (Original size)You can illuminate the screen with Led's There are two Joycon versions: -One with a bare joycon body and separated buttons. This version is marked with a “-x-“ in the filename.-A solid one with buttons and Joycon body in one piece. ( -z- ) There three console versions: -A two-part model that you can use with LEDs. ( -y- )-A solid single piece model. ( -w- )-A solid two-piece model for smaller 3d printers. ( -k- ) Instructions Print with infill, no support.Glue the parts together.Print "screen.pdf", cut it out and stick it to the front of the consoleIf you use LED’s, I recommend to print the "screen.pdf" twice and glue one on top of the other. Upload a photo and enjoy the anticipation! If you have any suggestions for improvement, questions or need further information, feel free to contact me.Gerne auch auf Deutsch :-) 

<html><head></head><body><div class="text-auto-link">
                                            <p>This is an adapter to go from the 2.625&quot; Shop-vac hose(one of the larger sizes) to the 2.25&quot; Shop-vac hose.&#xA0; Both ends of the adapter fit inside of each hose.&#xA0; I printed this with PETG and with no support (small end down).</p>
										</div>
                                    								</body></html>

Shop-vac Hose adapter

 This is an adapter to go from the 2.625" Shop-vac hose(one of the larger sizes) to the 2.25" Shop-vac hose. Both ends of the adapter fit inside of each hose. I printed this with PETG and with no support (small end down). 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>I tried to design a slim enclosure again using a channel outside between the top and bottom part to let the case apear more flat - and, to cover possible impressisions ;-).<br> I recommend to print the parts in different colors.<br> To fasten the controller board to the bottom part, first put the distance cylinders between the boards and use metrical screws M3 x 12 (14).<br> Both will work without tapping before.<br> There is no room for hexagonal pockets in the top part. You can screw M3 x 16 directly into it.<br> The second bottom part contains several screw nut deepenings for fastening the case as you like. If you mount it to an 8 mm rod you can use the case clamps.<br> If the cables are plugged in, the case inevitably has a slope of 6&#xB0;. In case you need more slope:<br> I&apos;m already thinking about a base that can be screwed below the housing.<br> If you are interested, look out for this thing which I will publish separated.</p>
<p>And yes, don&apos;t forget to assemble the distance cylinders - the display&apos;s bord won&apos;t like it ;-)</p>
										</div>
										
                                    								</body></html>

Case for the Full Graphic Smart LCD Controller

 I tried to design a slim enclosure again using a channel outside between the top and bottom part to let the case apear more flat - and, to cover possible impressisions ;-). I recommend to print the parts in different colors. To fasten the controller board to the bottom part, first put the distance cylinders between the boards and use metrical screws M3 x 12 (14). Both will work without tapping before. There is no room for hexagonal pockets in the top part. You can screw M3 x 16 directly into it. The second bottom part contains several screw nut deepenings for fastening the case as you like. If you mount it to an 8 mm rod you can use the case clamps. If the cables are plugged in, the case inevitably has a slope of 6°. In case you need more slope: I'm already thinking about a base that can be screwed below the housing. If you are interested, look out for this thing which I will publish separated. And yes, don't forget to assemble the distance cylinders - the display's bord won't like it ;-) 

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>A horrifying Halloween treat for your RPG table!</p>
<p>This model is 28mm scale and requires supports. Raft recommended.</p>
<p>If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at (www.punkinfigs.com), All of my 3D printable releases are printed before release to insure that they print well even on a simple, starter FDM printer.</p></div>
</body></html>

Pumpkin Wraith

A horrifying Halloween treat for your RPG table!

This model is 28mm scale and requires supports. Raft recommended.

If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at (www.punkinfigs.com), All of my 3D printable releases are printed before release to insure that they print well even on a simple, starter FDM printer.

<html><head></head><body><h3 class="thing-component-header summary summary">Summary</h3>
<div><p>Portable speaker case designed in Fusion 360 with space for 2 - 4 inch speakers and electronics. Added speaker in  parts for printing on small printers.</p></div>
</body></html>

Portable Speaker case

Portable speaker case designed in Fusion 360 with space for 2 - 4 inch speakers and electronics. Added speaker in  parts for printing on small printers.

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>It&#xB4;s very difficult to fly the Mavic, while you stay under the sunlight, and properly watch the attached cellphone visor, even if you crank up the brightness to the maximum. This device aims to minimize that stress. It&apos;s detachable, so you can easily fit the parts into the Mavic shoulder bag.</p>
<p>Included are parts to fit iPhone 6 &amp; 7, iPhone 6 &amp; 7 plus and Samsung Note4. The parts named &quot;base&quot;, &quot;sideL&quot; and &quot;sideR&quot; are the same for all models. Only &quot;back&quot; and &quot;top&quot; are customized according to the phone model.</p>
										</div>
										
                                    								</body></html>

DJI Mavic Pro cellphone Hood iPhone 6 & 7, Note 4

 It´s very difficult to fly the Mavic, while you stay under the sunlight, and properly watch the attached cellphone visor, even if you crank up the brightness to the maximum. This device aims to minimize that stress. It's detachable, so you can easily fit the parts into the Mavic shoulder bag. Included are parts to fit iPhone 6 & 7, iPhone 6 & 7 plus and Samsung Note4. The parts named "base", "sideL" and "sideR" are the same for all models. Only "back" and "top" are customized according to the phone model. 

<html><head></head><body><div class="text-auto-link">
                                            <p>Ligature for Vandoren Tenor Sax TL3</p>
<p>&#xA0;</p>
<p>&#xA0;</p>
<p>#FixMyInstrument @MyMiniFactory @3DWOX_Sindoh</p>
										</div>
                                    								</body></html>

Ligature for Vandoren Tenor Sax TL3 MouthPiece

 Ligature for Vandoren Tenor Sax TL3 #FixMyInstrument @MyMiniFactory @3DWOX_Sindoh 

<html><head></head><body><div class="text-auto-link">
                                            <p>This spool holder attches to 1.5x0.75&quot; boards by a simple clip mechanism and supports spools up almost 4&quot; wide (close to 10cm).&#xA0;</p>
<p>Joel wanted a simple/functional design so here you go :)</p>
										</div>
                                    								</body></html>

Joel's simple attaching spool holder

 This spool holder attches to 1.5x0.75" boards by a simple clip mechanism and supports spools up almost 4" wide (close to 10cm). Joel wanted a simple/functional design so here you go :) 

<html><head></head><body><div class="short-text text-auto-link  ">
                                            <p>A fun little 3D printable replica of the classic Sandbox turtle. Great for jewelry storage or a mini zen sand garden. Prints with no supports and at any scale!&#xA0;</p>
<p>If you like my work and would like to see more of it, check out my Instagram @coolthingsbyjacob</p>
<p>Thank you, and happy printing!</p>
										</div>
										
                                    								</body></html>

Sandbox Turtle

 A fun little 3D printable replica of the classic Sandbox turtle. Great for jewelry storage or a mini zen sand garden. Prints with no supports and at any scale! If you like my work and would like to see more of it, check out my Instagram @coolthingsbyjacob Thank you, and happy printing! 

Thingscanner

Aggregating from:

Some articles you might like